limoss HC373 Cinema Control System Wall Unit User Manual Cinema system

limoss (Shenzhen) Co., ltd Cinema Control System Wall Unit Cinema system

User Manual

linear motion systems Cinema Seat Mass Open/Close Wall Box Transmitter Product Specification
Specification Mass Open/Close system Wall Unit 2 GL-TE-24(V04) Warning (1) This system is to be used when all seats are unoccupied. The theater should be completely vacant when this system is used!! (2) The socket-outlet shall be installed near the equipment and shall be easily accessible! FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or medications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with minimum distance 20cm between rotation & your body. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. RSS Statement: "This device complies with Industry Canada licence-exempt RSS standard(s).
Specification Mass Open/Close system Wall Unit 3 GL-TE-24(V04) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." RSS-102 Statement: "This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. " "Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. "
Specification Mass Open/Close system Wall Unit 4 GL-TE-24(V04) CE-RED Declaration Hereby, limoss (Shenzhen) Co., Ltd. declares that this HC373 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU ,which this declaration refers conforms with the relevant standards: 3.1a Health and safety: EN60950-1:2006+A11:2009+A1:2010+A12:2011+ A2:2013 3.1b EMC: Draft ETSI EN 301 489-1 V2.2.0 Final Draft ETSI EN 301 489-3 V2.1.1 3.2 Radio: ETSI EN 300 440 V2.1.1 Description This system is designed for cinema seats mass open and close. With one wall unit box could control up hundreds of seats open and close at one time. Technical Parameter Mass Open and Close Wall Box Model: HC373 Article No.: Dimension:250x200x100mm AC Input: 100~240VAC,50/60Hz,0.4A Max Backup Battery: 18V (2x 6LR61) Wireless Parameters  RF Frequency: 2.4GHz  Working mode: Broadcasting only  Control Range: >50m in open space Antenna  Build-in 2.4GHz 3dBi Antenna Key lock switch  2 position on and off with key
Specification Mass Open/Close system Wall Unit 5 GL-TE-24(V04) Display  16 characters x 2 Row Certification:  CE/FCC/cTUVs/
Specification Mass Open/Close system Wall Unit 6 GL-TE-24(V04) Description for system LCD Display Power Key lock switch
Specification Mass Open/Close system Wall Unit 7 GL-TE-24(V04) Label Operation Instruction: Before all operation, please connect transmitter box to DC power, plug the receiver box MC250 to L1 actuator , and turn the key lock to position “On”. The display will show information if power on and initialization correct. Pairing 1. Transmitter box:  Presse Open/Close/Enable at the same time, the display will show : “Enter the paring mode”, and counter for 3 s to enter pairing mode which “Paring…”.  Press any key will exit paring mode 2. Receiver box There are two method to make the pairing  When power on, there is 5 seconds in pairing model, once received pairing signal from transmitter , the pairing will execute automatically , he motor will drive out and in for twice in 4 seconds, then the paring is finished.  press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will drive out and in for twice in 4 seconds, then the paring is finished.
Specification Mass Open/Close system Wall Unit 8 GL-TE-24(V04) Operation:  Press Open + Enable to let all seats open  Press Close + Enable to let all seats Close
Specification Mass Open/Close system Wall Unit Revised history Item Change content Index Revised date 1 First issue 00 2017/2/19 2. Update drawing and operation 01 2017/2/25 3 Update Label Drawing and Input voltage 02 2017/03/13 4. 1. Change to Build-in 3dBi antenna 2. Remove external antenna and extension cable. 03 2017/05/31 5 Add attention information on page 2 04 2017/06/07

Navigation menu