limoss HC371 Cinema Control System Wall Unit User Manual Cinema system

limoss (Shenzhen) Co., ltd Cinema Control System Wall Unit Cinema system

Users Manual

linear motion systems Cinema Seat Mass Open/Close Wall Box Transmitter Product Specification
Mass Open/Close system Wall Unit Specification 2 GL-TE-017(V08) Warning The socket-outlet shall be installed near the equipment and shall be easily accessible! FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with minimum distance 20cm between rotation & your body. RSS-Gen & RSS-210 Statement: "This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." RSS-102 Statement: "This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. " "Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. "
Mass Open/Close system Wall Unit Specification 3 GL-TE-017(V08) Description This system is designed for cinema seats mass open and close. With one wall unit box could control up 100 sets seats open and close at one time. Technical Parameter Mass Open and Close Wall Box Model: HC371 Article No.: 501958 Dimension:250x200x100mm Input: 29Vdc, Max. 0.1A Backup Battery: 18V (2x 6LR61) Wireless Parameters  RF Frequency: 2.4GHz  Working mode: Broadcasting only  Control Range: >50m in open space Connection:  Antenna Connector: SMA female Key lock switch  2 position on and off with key Display  16 characters x 2 Row Certification:  CE/FCC/cTUVs/
Mass Open/Close system Wall Unit Specification 4 GL-TE-017(V08) Description for system 1． Front panel 2. Top side: SMA Antenna Connector LCD Display Female SMA-J Socket for antenna /extension cable Power Key lock switch
Mass Open/Close system Wall Unit Specification 5 GL-TE-017(V08) 3. DC Input with PG7 Connector 4. Inside Box Power Key lock switch LCD Display 1602 Main PCBA The DC Power Input (Cable gland optional) Backup Battery
Mass Open/Close system Wall Unit Specification 6 GL-TE-017(V08) 6. Accessary  2.4GHz 5dBi antenna x1  Antenna Extension Cable 2m x1  Antenna Front Panel  The way to assemble the face plate with antenna and extension cable.
Mass Open/Close system Wall Unit Specification 7 GL-TE-017(V08)
Mass Open/Close system Wall Unit Specification 8 GL-TE-017(V08) Label Operation Instruction: Before all operation, please connect transmitter box to DC power, plug the receiver box MC250 to L1 actuator , and turn the key lock to position “On”. The display will show information if power on and initialization correct. Pairing 1. Transmitter box:  Presse Open/Close/Enable at the same time, the display will show : “Enter the paring mode”, and counter for 3 s to enter.  Press any key will exit paring mode 2. Receiver box There are two method to make the pairing  When power on, there is 5 seconds in pairing model, once received pairing signal from transmitter , the pairing will execute automatically , he motor will drive out and in for twice in 4 seconds, then the paring is finished.  press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will drive out and in for twice in 4 seconds, then the paring is finished. Operation:  Press Open + Enable to let all seats open  Press Close n + Enable to let all seats Close Remark: If turning the key switch 2.5 times within 1 seconds, the operation will be disabled for 5 s, and the working LED indicator will be flashing to prevent user playing with the system.
Mass Open/Close system Wall Unit Specification Revised history Item Change content Index Revised date 1 First issue 00 2017/2/19 2. Update drawing and operation 01 2017/2/25

Navigation menu