limoss HC370 Cinema Control System Wall Unit User Manual Cinema system

limoss (Shenzhen) Co., ltd Cinema Control System Wall Unit Cinema system

Users Guide

linear motion systems Cinema Seat Mass Open/Close Wall Box Transmitter Product Specification
Mass Open/Close system Wall Unit 2016.09.22 2 GL-TE-017(V06) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or medications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with minimum distance 20cm between rotation & your body. RSS-Gen & RSS-210 Statement: "This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." RSS-102 Statement: "This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. " "Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. "
Mass Open/Close system Wall Unit 2016.09.22 3 GL-TE-017(V06) Description This system is designed for cinema seats mass open and close. With one wall unit box could control up 100 sets seats open and close at one time. Technical Parameter Mass Open and Close Wall Box Model: HC370 602087 Dimension:250x200x100mm AC Input: 100~240VAC,50/60Hz,1.6A ~0.7A Akku Pack  Cell:18650x3  Rated Capacity: 16.2Wh Wireless Parameters  RF Frequency: 2.4GHz  Working mode: Broadcasting only  Control Range: >50m in open space Connection:  Antenna Connector: SMA female  US AC cable 1400mm (Optional) Key selector switch  3 position with return in center and key LED Indicator  Green: Working  Red: Pairing Reset  Press the reset button to reset the transmitter if system halted. Certifiaction: CE/FCC/cTUVs/
Mass Open/Close system Wall Unit 2016.09.22 4 GL-TE-017(V06) Description for system 1． Front panel 2. Top side: SMA Antenna Connector Pairing Mode Indicator Working Mode Indicator Mass Close Position Mass Open Position Standby Position Female SMA-J Socket for antenna /extension cable Key selector switch Reset Button
Mass Open/Close system Wall Unit 2016.09.22 5 GL-TE-017(V06) 3. AC input with PG7 Connector 4. Inside Box AC Power Terminal lock Transmitter:MC230 Connector to Front panel SMPS+Akku: MC165+130 The AC Power Input (Cable gland optional) US AC Cable: 1400mm (Optional)
Mass Open/Close system Wall Unit 2016.09.22 6 GL-TE-017(V06) 5. Front Panel 6. Accessary  2.4GHz 5dBi antenna x1  Antenna Extension Cable 2m x1 Key selector switch Terminal LED Indicator Face plate connector T-Plug for Reset
Mass Open/Close system Wall Unit 2016.09.22 7 GL-TE-017(V06)  Antenna Front Panel  The way to assemble the face plate with antenna and extension cable.
Mass Open/Close system Wall Unit 2016.09.22 8 GL-TE-017(V06) Label Operation Instruction: Before all operation, please connect transmitter box to AC power, plug the receiver box MC250 to L1 actuator. Pairing 1. Transmitter box:  Turn the key left to position Open, turn right to position Close, and turn left to position Open again in 3 seconds, the pairing LED will light on, the transmitter is pairing mode.  Turn the key any direction will exit paring mode 2. Receiver box press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will drive out and in for twice in 4 seconds, then the paring is finished. Operation:  Turn key to position Open to let all seats open  Turn key to position Close to let all seats close  Release the key to position I to standby. Remark: If turning the key switch 2.5 times within 1 seconds, the operation will be disabled for 5 s, and the working LED indicator will be flashing to prevent user playing with the system.
Mass Open/Close system Wall Unit 2016.09.22 Revised history Item Change content Index Revised date 1 First issue 00 2015.12.31 2 Add the picture and description 01 2016.02.02 3 Add drawing and detail description 02 2016.05.30 4 Add the Reset button, change 1& 2 to open and close 03 2016.08.23 5 Add the Reset text on the face plate, update with new lock, add the AC cable 04 2016.09.06 6 Correct the label art. No. 05 2016.09.06 7. Add FCC statement and IC caution , add certification list 06 2016.09.22

Navigation menu