iRobot R3MOD24A 2.4 GHz Module/4123659 User Manual CERTIFICATE OF COMPLIANCE

iRobot Corporation 2.4 GHz Module/4123659 CERTIFICATE OF COMPLIANCE

revised users manual

Rhein Tech Laboratories, Inc. Client: iRobot Corporation 360 Herndon Parkway Model: 2.4 GHz Module Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: UFE-R3MOD24A/6652A-R3MOD24A Herndon, VA 20170 http://www.rheintech.com Report #: 2007155 Page 38 of 42 Appendix I: Manual Please refer to the following page.
2.4 GHZ Module User Manual Compliance Language As a condition of using this module, and in addition to the requirements above, the manufacturer further agree to the following: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Only the antenna with which an intentional radiator is authorized may be used with the intentional radiator. and to include the preceding statements in their installation manual where the consumer will observe them. 2.4 GHz Module Labeling Requirements The 2.4 GHz Module is to be installed in a product without alteration to provide a wireless link. During installation, do not remove the FCC ID information on the module. The product that makes use of this module must display the following text on the product, and in the installation manual, where it will be visible and readable by the consumer: Contains FCC ID: UFE-R3MOD24A IC: 6652A-R3MOD24A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu