iOttie HLCRIO201 Easy One touch connect User Manual

iOttie, Inc Easy One touch connect

User Manual

EN If you love your iOttie product, let us know by leaving a review online, or connect with us on our social platforms.FR Si vous aimez votre produit iOttie, merci de nous le faire savoir en laissant un commentaire en ligne ou nous rejoindre sur nos réseaux sociaux.ES Si le gusta su producto iOttie, háganos saber dejando una reseña en línea, o conéctese con nosotros en nuestras plataformas sociales.www.iottie.com cs@iottie.comAlexa Built-in Dashboard & Windshield MountFRENCH Alexa Built-in Dashboard & Windshield MountSPANISH Alexa Built-in Dashboard & Windshield MountEasy One Touch Connect1 installation/installation/installation2 software/software/software3 skills/skills/skills
At a GlanceFootFoot KnobMute ButtonRelease BarsSuction CupDashboard PadLocking Side ArmsLeverTelescopic KnobTelescopic ArmPivot KnobDual Car Charger with Micro USB cableMicrophonesEasy One Touch Trigger Button Micro USB PortCradle KnobWhat’s in the Box:Mounting Head, Base, and Dual Car Charger with Micro USB CableGetting StartedCritical InformationFor optimal mounting, please follow the detailed instructions within this manual when using the Easy One Touch Connect. For software installation, please see the “Software Manual.” iOttie is not liable for possible damages due to product misuse.The Easy One Touch Connect is mounted with a semi-permanent adhesive tape. Each base is one-time use only. Once removed, it cannot be re-mounted.When mounting, it is recommended that the surface & product be above 40° F.Manuals should be followed in order: 1. Installation 2. Software 3. Skills.SpecificationsCar Charger SpecificationsITEM SPECIFICATIONSINPUT --CHARGING PORT Micro USBDEPTH 2.25”WIDTH 4.25”HEIGHT 3.6”WEIGHT 3.345 ozINPUT OUTPUT12V~24VDC 5V - 3A 9V - 2A 12V - 1.5V
Installation1. Peel o the protective film on the Suction Cup and press firmly onto the windshield. A. Connect the Mount Cradle with the Ball Joint.Choose an installation method: Dashboard/Flat Surface (A) or Windshield/Curved Glass (B)Choose an area on a flat surface on the vehicle’s dashboard and wipe any dust or debris from the surface. Choose a location on the windshield and wipe any dust or debris from the surface.B. Then, tighten the Cradle Knob.2. Push Locking Lever down to engage suction. 2. Selecting a Location1. Assembling the MountOption ADashboard or Flat Surface InstallationOption B Windshield Installation or Curved Glass Installation2. Peel o the protective film on the Suction Cup and press mount firmly onto the dashboard pad. 3. Push Locking Lever down to engage suction. Connecting PowerThe Easy One Touch Connect is powered via a micro-USB cable. There is no o/on switch on the device. Once it is plugged in, the device will remain on unless the vehicle shuts o power when in parking mode. 1. Plug the micro-USB cable into the USB port on the back of the Mounting Head.STICKY SUCTION CUPSTICKY SUCTION CUP2. Insert Car Charger into your vehicle’s power port.1. Peel o the film on the dashboard pad & stick on the desired installation location.
Using the Easy One Touch MechanismThe Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds. MountingReleasingStep 1: Press the locking side arms in. Press the locking side arms with one hand and retrieve the device.Adjusting the Mount1. Cradle KnobWhen mounting in landscape mode, loosen to rotate the Cradle. Tighten to lock in desired position.3. Telescopic KnobLocated on top of Telescopic Arm, loosen to extend the arm, and tighten to secure distance.2. Foot KnobLocated on the lower back of Cradle. Loosen to re-position mount’s foot. The Foot can be adjusted up & down or side-to-side.4. Pivot KnobLocated on the side of the Mount Base, turning allows you to pivot telescopic arm. Tighten to secure position.Step 2: Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close on contact and hold the device during the driving journey.
FCC Statement15.191. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.15.21Note: The grantee is not responsible for any changes or modifications not expressly approved bythe party responsible for compliance. Such modifications could void the user’s authority to operatethe equipment.15.105(b)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help

Navigation menu