iControl Networks CH1000 Icontrol One Link User Manual QIG NA301P draft V1 1 0416

iControl Networks Inc. Icontrol One Link QIG NA301P draft V1 1 0416

User Manual

iIcontrol One LinkUser GuideCH-1000
iiTable of ContentsCHAPTER 1 INTRODUCTION ......................................................................................... 1Package Contents.......................................................................................................... 1Features......................................................................................................................... 1LEDs ............................................................................................................................. 2CHAPTER 2 INITIAL INSTALLATION........................................................................... 4Requirements................................................................................................................ 4Procedure...................................................................................................................... 4APPENDIX A SPECIFICATION ........................................................................................ 5Icontrol One Link ......................................................................................................... 5Regulatory Approvals ................................................................................................... 5Copyright ©2015. All Rights Reserved.Document Version: 1.1All trademarks and trade names are the properties of their respective owners.
1Chapter 1IntroductionThis Chapter provides an overview of the Icontrol One Link's features andcapabilities.Congratulations on the purchase of your new Icontrol One Link. This device is a primarycontroller and gateway, which includes Wi-Fi and Z-Wave home automation radios, provid-ing connectivity to security systems and devices (including cameras and sensors).Package ContentsThe following items should be included:•The Icontrol One Link Unit x 1•Ethernet Cable x 1•Quick Installation GuideIf any of the above items are damaged or missing, please contact your dealer immediately.Features•MT7620A processor with128MB Flash and 128MB SDRAM•One Ethernet port with RJ45 connector•Front panel LEDs•Z-Wave transceiver•WPS button•Reset button•AC power plug (US)•Internal antenna for Wi-Fi and Z-Wave1
2LEDsTop-mounted LEDsThe Icontrol One Link has four LEDs.Service •On (Green) - The CPE device is activated in iControl network.•Off - The CPE device is not activated in iControl network.•Flashing - The CPE device can not communicated with iControlnetwork.Wi-Fi •On - Wi-Fi device attached.•Off - Wi-Fi connection is not available or no Wi-Fi device at-tached.•Flashing - WPS function is activated.Z-Wave •On (Green) - Z-Wave devices attached.•Off - Z-Wave function disabled, or no Z-Wave devices attached.•Flashing - Learn/exclusion/inclusion mode on.POWER •On (Green) - Power On/Normal operation•Off -PowerOff•Flashing - Booting or Firmware upgrade.
3Rear/Side PanelWPS Button Use a clip to press the WPS button on the device and on your otherwireless device to perform WPS function that easily creates an encryp-tion-securedwireless connection automatically.RESET This button has two (2) functions:•Reboot. When pressed and released, the Icontrol One Link willreboot (restart).•Clear All Data. This button can also be used to clear ALL dataand restore ALL settings to the factory default values.To Clear All Data and restore the factory default values:1. Power On.2. Use a clip to press the Reset button and keep holding for 15seconds.3. Release the Reset Button. The Icontrol One Link is now using thefactory default values.ETHERNETPortUse standard LAN cable (RJ45 connector) to connect your router to theport.Ethernet Activi-ty/Link LED•On - Ethernet connection established, but the connection is idle.•Off - Ethernet connection is not available.•Blink - Data is being transmitted or received via Ethernet connec-tion.
4Chapter 2Initial InstallationThis Chapter covers the installation of the Icontrol One Link.Requirements•Use a standard 10/100BaseT network (UTP) cable with RJ45 connector.Procedure1. Choose an Installation SiteSelect a suitable place to install the Icontrol One Link.2. Connect LAN CableUse standard LAN cable to connect the router and the Ethernet port on the Icontrol OneLink.4. Power UpPlug the Icontrol One Link into an outlet or extension cord.5. Check the LEDs•The POWER LED should be ON.•The Service LED should be ON.6. Connect Other DevicesUse the Icontrol One Link as a network coordinator to connect certified Z-Wave sensorsand home surveillance devices.2
5Appendix ASpecificationIcontrol One LinkModel CH-1000Dimensions 97mm(W) * 60mm(D) * 40mm(H) (without plug)Operating Temperature 0°Cto40°CStorage Temperature -20°Cto70°CNetwork Protocol TCP/IPNetwork Interface 1 * 10/100BaseT (RJ45) WAN PortLEDs 4LAN LEDs 2Antenna 2 * Wi-Fi Internal Antennas1 * Z-Wave Internal AntennaPower Adapter AC Input 120V with US PlugRegulatory ApprovalsFCC StatementThis equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio com-munications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.•Consult the dealer or an experienced radio/TV technician for help.To assure continued compliance, any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operate this equipment.(Example - use only shielded interface cables when connecting to computer or peripheraldevices).A
6FCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with a minimum distance of 20centimeters between the radiator and your body.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.

Navigation menu