Zippy Technology RF610 2.4G Keyboard User Manual A4E2A5552E706466

Zippy Technology Corp. 2.4G Keyboard A4E2A5552E706466

Users Manual

System requirementsIBM or compatible PC     Windows and Macintosh Operating System     Pentium-equivalent processor or above     At least 10MB hard disk space     One available USB portOS supportWindows XP/Windows 2000/NT     Windows ME     MAC OSPlease do not use this product in ashy, wet, or oilyenvironments. Failure to do so may shorten the life of this product and may cause bodily harm.Please keep this product as far away from Radio Frequency interruption areas as possible. This is not an outdoor product. Exposing this product tothe elements may cause damages to the productand bodily harm to its users.Please do not use petroleum, benzene or thinner-based solution to clean this product.B. Setting up the Keyboard and Mouse1.Open the keyboard's battery compartment cover and insert the two pieces of AAA  Alkaline batteries.Make sure they are properly installed. (FIG. 1)2.Replace the keyboard battery compartment cover.3.Open the mouse's battery compartment cover andinsert the two pieces of AAA Rechargeable batteries.  Make sure they are properly installed. (FIG. 2)4.Replace the mouse battery compartment cover.5.Press the button on the dongle receiver to reset the ID.6.Flip the keyboard around and gently press the ID key; a pointy object such as a pin may be used.7.Flip the mouse around and gently press the ID key;a pointy object such as a pin may be used.8.The LED indicator on the dongle receiver will go offwhen the ID's have been properly set and the keyboardand mouse are working.A. Setting up the Dongle Receiver1.Plug the dongle receiver (FIG. 3) into an available    USB2. Wait for Windows to install drivers for the dongle      receiver, keyboard and mouse.3. When the dongle receiver has been properly initialized,     its LED light will stay alit.Installation ProcedureBefore installing this product please make sure you have  one available USB port reserved for the dongle receiver.If your computer did not have an available USB port, you may purchase one of Zippy's 10-Key keypad with USBExpansion ports or equivalent USB hub.Dimensions: 98 x 56 x 35.8 mm          Weight: 95 +/- 25g (with Battery)          Key Number: 3 Keys          (Wheel button on middle button)           Battery: 2 x AAA batteries           (Rechargeable,  do not charge non-rechargeable          dry-cell or alkaline batteries)          Battery Life: 1 Month (Base on average usage)          Channel: 16 Channels          ID: 65535 sets          Radio Frequency: 2.4 GHzDimensions: L70xW22.7xH12.3mmWeight : 10.9gInterface: USB 1.1AttentionThe mouse's optical sensor may not work on bumpy,reflective and/or translucent materials; such as glass, polished table top and/or cloth. We recommend using a mouse pad for improved accuracy.Dimensions: 290 x 135 x 27 mm              Weight: 500 +/- 25g (with Battery)              Key Number: 88 Keys(By Ianguage)              Battery: 2 x AAA batteries              Battery Life: 3 Month (Base on average usage)              Channel: 16 Channels              ID: 65535 sets              Radio Frequency: 2.4 GHz              Hot Keys :Search, E-mail, HomeWarranty InformationThis  product  is  backed  by  a  One-Year Manufacturer's Warranty, starting  from  the  date  of  purchase.  Thewarranty covers for free repair in accordance with  the contents stated herein but does not cover wear and tearand any malfunction or damages as results of improper usage as stated in this manual.WarningPlease be careful when resetting the ID's for the keyboard,mouse and dongle receiver.  Objects with sharp point may break and leave behind shards.Battery Low1.Low-Battery is indicated by the illumination ofthe mouse scroll-wheel. Please recharge the mouse when the LEDlights up to illuminate the scroll-wheel.Only connect the mouse to the charger when rechargeable  batteries are being used. Charging non-rechargeable dry-cell or alkaline batteries may cause the batteries  to explode.2.If you choose not to charge the mouse, please swapoutthe rechargeable batteries with fresh batteries for continuous usage.3.While the mouse is in sleep mode, please press anybutton or move the scroll wheel to wake it up.4. We recommend using alkaline batteries for the keyboard.5.You may need to reset the ID's after replacing new batteries for the keyboard and mouse.User's ManualWarning45786213Introduction          Wireless Keyboard x 1          Wireless Optical Mouse x 1          USB 2.4GHz dongle receiver x 1          Manual/warranty x 1           Optical Mouse Charger x 1 / (110V, 220V, optional)          Rechargeable batteries x 2 (AAA, for mouse)          Alkaline batteries x 2 (AAA, for keyboard)Thank  you  for  your  patronage  of  purchasing  ourcordless keyboard and optical mouse. For your ownsafety,  please  read  this manual thoroughly beforeusing this product.  After you have read this manual,please keep it in place for reference when necessary.The  following  items  are  included  in  the  package.Please make sure all items are accounted for as youopen the  package. If  there was any i tem missing or damaged,  please  contact  the  reseller  where  theproduct  was purchased or our support center.Contents in the packageSpecificationsKeyboardMouseDongle Receiver"2.4GHz All Around Freedom, InfinitePossibilities"Alpha Transport Mini, RF-610port.2403,2407,2411,2415,2419,2423,2427,2431 2435,2439,2443,2447,2451,2455,2459,2463,
This warranty is intended to provide free repair under the terns and period stated herein. Accordingly, thiswarranty shall not limit the legal rights entitled to thecustomer. For more information concerning the repairafter expiration of the guarantee period, please contactus or our retailer where you purchased this product.Names of other products mentioned in this Manual are the  trademarks  or  registered  trademarks  of  theirrespective owners.Mandatory repair charges are required for the following conditions, even within the guarantee period:(1) Malfunction or damage is due to misuse or improper       alteration or repair.(2) Malfunction or damage is caused by the movement       or fall during installation after the purchase.(3) Malfunction or damage is caused by a fire, salt, gas,       earthquake, lightning, wind, water or other natural       calamities, or abnormal voltage.(4) The manual is not presented.(5) Date of purchase, customer's name, name of the       shop are not filled in or are altered.(6) Malfunction or damage is caused by other devices       connected to the RF-610.      To get the repair service, please disconnect RF-610      from other devices connected.WarningAs shielded-type power cord is required in order to meetFCC omission limits and also to prevent interference to  the nearby radio and television reception. It is essential  that only the supplied power cord be used.Use only shielded cables to connect I/O devices to thisequipment.You are cautioned that changes or modifications notexpressly  approved  by  the  party  responsible  forcompliance could void your authority to operate theequipment.All brand names, trademarks and logos are the properties  of their respective owners.TroubleshootingPlease visit our On-Line FAQ section for help.FCC Statement on CLASS BThis equipment has been tested and found to comply with the limits foe a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radioor television reception, which can be determined byturning the equipment off and on, the user is encouraged  to try to correct the interference by one or more of the  following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and   receiver.- Connect the equipment into and outlet on a circuit   different from that to which the receiver is connected.- Consult the dealer or an experienced radio / TV  technician for help.Please do not attempt to charge non-rechargeable batteries using the mouse and adapter. Doing so maycause the non-rechargeable batteries to explode.To remove batteries, please repeat steps 4 to 3 or 2 to 1 in reverse order.C700764009      Search:      E-mail:      Home:Hotkey FunctionsThere are five built-in hotkeys for the RF-610 for quick access under the Windows operating system. Pleaserefer to the following section on their functions.Start the default Web browser orgo to the Home Web page.Start the default e-mail program.Open the Internet Search pane.1112 1413109      Batt. Low Low Battery Notice.Function discriptionID buttonID buttonCharge portBattery housingID button Battery housingFIG.1FIG.2FIG.3++Boz!dibohft!ps!npejgjdbujpot!)jodmvejoh!uif!boufoobt*!nbef!up!uijt!efwjdf!uibu!bsf!opu!!fyqsfttmz!bqqspwfe!cz!uif!nbovgbduvsfs!nbz!wpje!uif!vtfsȷt!bvuipsjuz!up!pqfsbuf!uif!!frvjqnfou/

Navigation menu