Zentan Technology DZRCS1 Bluetooth And ANT+ Wireless Module User Manual

Zentan Technology Co., Ltd. Bluetooth And ANT+ Wireless Module

User Manual

ZR7 Bluetooth And ANT+ Wireless Module Hardware Integration Guide Version 1.0 April 2, 2018
Specification Category Feature Implementation RF Bluetooth ANT+ Frequency 4.2 Single Mode Broadcast 2.402-2.480 GHz FW Upgrade nRF Toolbox Via JTAG interface Over the air Via JTAG interface Supply Voltage 1.7 – 3.6V Physical 18.25mm X 11mm Operating Temperature 0 to 50°C Storage Temperature -10 to 60°C
Pin Definitions Pin number Pin Name TYPE Description 1 GND POWER GND PIN 2 P0.25 Digital I/O General purpose I/O PIN 3 P0.26 Digital I/O General purpose I/O PIN 4 P0.27 Digital I/O General purpose I/O PIN 5 P0.28 AIN4 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 6 P0.29 AIN5 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 7 P0.30 AIN6 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 8 P0.31 AIN7 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 9 GND POWER GND PIN 10 DEC4 NC 11 DCC NC 12 X1 NC 13 X2 NC 14 P0.2 AIN0 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 15 P0.3 AIN1 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 16 P0.4 AIN2 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 17 P0.5 AIN3 Digital I/O Analog input General purpose I/O PIN SAADC/COMP/LPCOMP input 18 P0.6 Digital I/O General purpose I/O PIN 19 P0.7 Digital I/O General purpose I/O PIN 20 P0.8 Digital I/O General purpose I/O PIN 21 P0.9 NFC1 Digital I/O NFC INPUT General purpose I/O PIN NFC antenna connection 22 P0.10 NFC2 Digital I/O NFC INPUT General purpose I/O PIN NFC antenna connection 23 VDD POWER POWER supply pin 24 P0.11 Digital I/O General purpose I/O PIN 25 P0.12 Digital I/O General purpose I/O PIN
26 P0.13 Digital I/O General purpose I/O PIN 27 P0.14 Digital I/O General purpose I/O PIN 28 P0.15 Digital I/O General purpose I/O PIN 29 P0.16 Digital I/O General purpose I/O PIN 30 P0.17 Digital I/O General purpose I/O PIN 31 P0.18 Digital I/O General purpose I/O PIN 32 P0.19 Digital I/O General purpose I/O PIN 33 P0.20 Digital I/O General purpose I/O PIN 34 P021 RESET Digital I/O General purpose I/O PIN configurable as pin reset 35 SWDCLK Digital input serial wire Debug clock input for debug and programming 36 SWDIO Digital I/O serial wire Debug I/O for debug and programming 37 P0.22 Digital I/O General purpose I/O PIN 38 P0.23 Digital I/O General purpose I/O PIN 39 P0.24 Digital I/O General purpose I/O PIN 40 GND POWER GND PIN
This device is intended only for OEM integrators under the following conditions: In accordance with FCC Part 15C and RSP-100, this module is listed as a Modular Transmitter device. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. The antenna of this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product approval procedures. FCC Label Instructions The final end product must be labeled in a visible area with the following “Contains Transmitter Module FCC ID: QSWDZRCS1” Any similar wording that expresses the same meaning may be used. Additionally, there must be the following sentence on the device, unless it is too small to carry it: “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” USER MANUAL Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu