Zebra Technologies TC700H Touch Computer User Manual MN000114A01b front

Zebra Technologies Corporation Touch Computer MN000114A01b front

USERS MANUAL

658123710181621171419152041112913NotificationsCharging\Notification LED:Data Capture LED:Slow blinking amber: Battery chargingSolid green: Fully chargedFast blinking amber: Charging errorSlow blinking blue: Application notification.Green: Good DecodeData CaptureCharging/NotificationNote: Remove protective shipping film that covers the touch screen, exit window and camera window before using.FEATURES CARD INSTALLATIONMicroSD Card Installation (Optional)1. Remove the handstrap.2. Lift the access door.3. Insert the microSD card into the card holder. Push the card all the way into the card holder.NOTE :Proper position of the microSD card — the card connector (i.e., gold contacts) should be facing down.4. Replace the access door. Ensure that it is properly seated.TC70QUICK START GUIDE1 Scan Button2 Programmable Button3 Back Button4 Home Button5 Power Input6 Search Button7 Menu Button8 Touch Screen (with screen protector)9 Power Button10 Receiver11 Charging/Notification LED12 Data Capture LED13 Front-facing Camera14 Handstrap Mounting Point15 Camera Flash16 Rear-facing Camera17 Interface Connector18 Exit Window19 Volume Button20 Battery Release Latch21 HandstrapNote 1: To reset the TC70, press and hold the Power button until the menu appears and then select Reset. BATTERY INSTALLATIONRed: Data capture in process1. Remove the handstrap.2. Insert the bottom of the battery into the battery compartment.3. Rotate the battery down into the battery compartment and press the battery down until it snaps into position.4. Re-attach the handstrap.1122334411223344Review Copy
AVOID EXTREMEWRIST ANGLESMOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. Android is a trademark of Google Inc. All other trademarks are the property of their respective owners.© 2014 Motorola Solutions, Inc. All rights reserved.MN000746A01 Rev. A — April 2014Imaging Camera DecodeCamera Photo1. Ensure that an application is open and a text field is in focus (text cursor in text field).2. Point the TC70 at the bar code.3. Press the Scan button.4. In the image window align the red target over the bar code. When the TC70 decodes the bar code the Data Capture LED light green and a beep sounds.5. Release the Scan button.1. Touch > Camera.2. Point the TC70 at an object.3. Touch the shutter button.Motorola Solutions, Inc.1301 E. Elgonquin Rd. Schaumburg, IL 60196-1078, U.S.A.ACCESSORIES DATA CAPTURE OPTIONSAVOID EXTREME WRIST ANGLES1. Unlatch the handstrap.2. Press the Power button until the menu appears.3. Touch Power Off.4. Press the battery latches in and lift the battery from the TC70.1. Ensure that an application is open and a text field is in focus (text cursor in text field).2. Point the exit window at the bar code.3. Press and hold the Scan button.4. The red laser aiming pattern turn on to assit in aiming. When the TC70 decodes the bar code the Data Capture LED light green and a beep sounds.5. Release the Scan button.For more information see the TC70 User Guide and the TC70 Integator Guide available at: http://www.motorolasolutions.com/supportBATTERY REMOVALFive Slot Charge Only CradleHolsterMagnetic Stripe ReaderCharge Only CableFour Slot Battery ChargerReview Copy

Navigation menu