Zebra Technologies P430I-UHF Thermal Card Printer User Manual P430i UM
Zebra Technologies Corporation Thermal Card Printer P430i UM
Contents
- 1. User Manual Part 1 of 2
- 2. User manual Part 2 of 2
- 3. user manaul part 1 of 2
- 4. user manual part 2 of 2
user manaul part 1 of 2
![980470-001 Rev. AUser’s ManualZebra® P430iCard Printer](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-1.png)
![Dual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-2.png)
![980470-001 Rev. B P430i User’s Manual iForewordThis manual contains installation and operation information for the Zebra P430i Card Printers manufactured by Zebra Technologies Corporation, Camarillo, California.Return Materials AuthorizationBefore returning any equipment to Zebra Technologies Corporation for in-warranty or out-of-warranty repair, contact Repair Administration for a Return Materials Authorization (RMA) number. Repack the equipment in the original packing material and mark the RMA number clearly on the outside. Ship the equipment, freight prepaid, to the address listed below:• For USA, Latin America, and Asia / Pacific:Zebra Technologies CorporationZebra Card Printer Solutions1001 Flynn RoadCamarillo, CA. 93012-8706.USAPhone: +1 (805) 578-5001FAX: +1 (805) 579-1808• For Europe and Middle East:Zebra Technologies CorporationZebra Card Printer SolutionsPittman Way, FulwoodPreston, PR2 9ZDLancashire, U.K.Phone: +44 - 1 - 772 - 797555FAX: +44 - 1 - 772 - 693000](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-3.png)
![ii P430i User’s Manual 980470-001 Rev. BForewordCopyright Notice© 2006 ZIH Corp.This document contains information proprietary to Zebra Technologies Corporation. This document and the information contained within is Copyrighted by Zebra Technologies Corporation and may not be duplicated in full or in part by any person without written approval from Zebra. While every effort has been made to keep the information contained within current and accurate as of the date of publication, no guarantee is given that the document is error-free or that it is accurate with regard to any specification. Zebra reserves the right to make changes, for the purpose of product improvement, at any time.TrademarksP430i is a trademark and Zebra is a registered trademark of Zebra Technologies Corporation. Windows and MS.DOS are registered trademarks of Microsoft Corp. All other trademarks or registered trademarks are marks of their respective holders.Product DisposalProduct Disposal Information • Do not dispose of this product in unsorted municipal waste. This product is recyclable, and should be recycled according to your local standards. For more information, please see our web site at:http://www.zebra.com/environment](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-4.png)
![Foreword980470-001 Rev. B P430i User’s Manual vEUROPE: Norway Only: This product is also designed for IT power system with phase to phase voltage 230V. Earth grounding is via the polarized, 3-wire power cord.FI: “Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan”SE: “Apparaten skall anslutas till jordat uttag”NO: “Apparatet må tilkoples jordet stikkontakt”FCC RegulationsNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by Zebra may cause harmful interference and void the FCC authorization to operate this equipment. FCC Radiation Exposure Statement (applicable to 15.247 device only)This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. Industry Canada NoticeThis device complies with Industry Canada ICES-003 requirements.Cet equipement est conforme a l’ICES-003 de la norm Industrielle Canadian.](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-5.png)
![iv P430i User’s Manual 980470-001 Rev. BForewordP430i Printer ModelThe Zebra Product Number tells a story:Here is a quick review of the Zebra Card Printer Series numbering and lettering system to help you.Model numbers include identifiers that specify options using the following lettering conventions:IconsThroughout this manual, different icons highlight important information, as follows:Part Number DescriptionP 4 3 0 i - _ _ _ _ _ - _ _ _ Base PrinterP430i Color Card Printer_ _ _ _ _ - 0 _ _ _ _ - _ _ __ _ _ _ _ - B _ _ _ _ - _ _ __ _ _ _ _ - C _ _ _ _ - _ _ __ _ _ _ _ - D _ _ _ _ - _ _ __ _ _ _ _ - E _ _ _ _ - _ _ __ _ _ _ _ - F _ _ _ _ - _ _ __ _ _ _ _ - H _ _ _ _ - _ _ _Smart Card OptionsNoneContact EncoderContact encoder & HID iCLASSContact encoder & MIFARE contactlessContact stationHID iCLASSMIFARE contactless_ _ _ _ _ - _ 0 _ _ _ - _ _ __ _ _ _ _ - _ M _ _ _ - _ _ _Magnetic EncoderNoneYes (select defaults below)_ _ _ _ _ - _ _ 0 _ _ - _ _ __ _ _ _ _ - _ _ 1 _ _ - _ _ _ _ _ _ _ _ - _ _ 3 _ _ - _ _ _Magnetic Encoder DefaultsNoneStripe Down, HiCoStripe Up, HiCo_ _ _ _ _ - _ _ _ 0 _ - _ _ _Memory ExpansionNone_ _ _ _ _ - _ _ _ _ A - _ _ __ _ _ _ _ - _ _ _ _ C - _ _ _InterfaceUSB OnlyUSB and Ethernet_ _ _ _ _ - _ _ _ _ _ - I _ __ _ _ _ _ - _ _ _ _ _ - U _ _Power CordsU. S. and EuropeU. K. and Australia_ _ _ _ _ - _ _ _ _ _ - _ D 0Windows Drivers and User Documentation / Training CDWindows Drivers and User Documentation / Training included on one CD (Software & Documentation Package) which contains Multi-language documentation](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-6.png)
![Foreword980470-001 Rev. B P430i User’s Manual vNote • Indicates information that emphasizes or supplements important points of the main text.Important • Advises you of information that is essential to complete a task, or points out the importance of specific information in the text.Provides an example or scenario to demonstrate or clarify a section of text.Electrostatic Discharge Caution • Warns you of the potential for electrostatic discharge.Electric Shock Caution • Warns you of a potential electric shock situation.Caution • Warns you of a situation where excessive heat could cause a burn.Caution • Advises you that failure to take or avoid a specific action could result in physical harm to you, or could result in physical damage to the hardware.](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-7.png)
![vi P430i User’s Manual 980470-001 Rev. BForewordDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-8.png)
![980470-001 Rev. A P430i User’s Manual viiTable of Contents1 • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Printer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Controls, Connectors, and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2LCD Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 • Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Unpacking the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Installing the Print Driver Software and Setting Driver Options. . . . . . . . . . . . . . . . . . . . . 10Installing the P430i Print Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Loading a Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Installing the Card Cleaning Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Setting the Card Thickness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Loading Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Card Output Hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Connecting the Printer to your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Connecting Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Printing a Test Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Packing the P430i Printer for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 • Printing a Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Setting Printer Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Printing a Sample Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Removing Rejected Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Feeding One Card at a Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-9.png)
![Table of Contentsviii P430i User’s Manual 980470-001 Rev. A4 • Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29When to Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29How to Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Cleaning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Card Cleaning Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32When to Replace the Cleaning Roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32How To Replace the Cleaning Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 • Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Print Quality Issues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Troubleshooting the Ethernet Connection and Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 41Resetting to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Ethernet Adapter Status Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Network Status/Activity Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 • Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Ribbon Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Card Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Fonts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Card Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Bi-Directional Communications Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Mechanical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Media Loading Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 • Magnetic Card Stripe Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Sample Encoding Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Magnetic Encoder Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48When to Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48How to Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48ISO Standard Encoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Media Loading Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-10.png)
![Table of Contents980470-001 Rev. A P430i User’s Manual ix • Smart Card Contact Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Smart Card Contact Station Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Printer Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 • Connecting to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53External Print Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Internal Print Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Sales and Support Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 • Worldwide Sales & Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Corporate Headquarters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Website. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-11.png)
![x P430i User’s Manual 980470-001 Rev. ATable of ContentsDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-12.png)
![980470-001 Rev. A P430i User’s Manual 11IntroductionThank you for choosing the Zebra P430i Card Printer. This manual guides you to efficient start up and operation of your new Card Printer.Printer FeaturesThe following shows the main functional features found on your P430i Printer.Dual-Sided ColorPanel ButtonPrint Head(Optional)Smart Card Contact StationOutput Hopper (shown in open position)Card Feeder Cover (shown open)Card Thickness ControlCard Cleaning CartridgeLCD Display PanelPrint Head Carriage LatchPrint Head Carriage (shown in open position)Main Lid(shown (Optional) Magnetic Encoding StationRibbon Supply SpindleRibbon Take-Up SpindleCard FlipperReject Bin(Access Door shown open)](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-13.png)
![2 P430i User’s Manual 980470-001 Rev. AIntroductionControls, Connectors, and IndicatorsControls, Connectors, and IndicatorsYour P430i Printer has an LCD Display Panel and a Panel Button on the front and a power connector, power switch, and interface connector(s) on the rear panel.Dual-Sided ColorLCD Display PanelPanel ButtonPower SwitchPower ConnectorNetwork Status / Activity LED *Ethernet Adapter Status LED *10/100base-T Connector * Ethernet Switch *USB Connector* These are on the optional Ethernet Adapter.Optional DB-9 Connector location for Smart Card Contact Station](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-14.png)
![IntroductionControls, Connectors, and Indicators980470-001 Rev. A P430i User’s Manual 3LCD PanelThe LCD Panel can display the following messages:Message ModeOperationalInitializing ScrollingSELF TEST ScrollingREADY FixedDOWNLOADING DATA FixedPRINTING MONO FixedMAG ENCODING FixedCONTACT ENCODING FixedCONTACTLESS ENCODING ScrollingPRINTING CYAN FixedPRINTING YELLOW FixedPRINTING MAGENTA FixedPRINTING BLACK FixedPRINTING OVERLAY FixedDOWNLOADING FW FixedWarnings (Printer will still Operate)CLEAN PRINTER ScrollingENCODING ERROR (printing stops) BlinkingCONTACT ERROR BlinkingCONTACTLESS ERROR ScrollingINVALID MAGNETIC DATA (encoding stops) ScrollingINVALID CONTACT DATA (encoding stops) ScrollingINVALID CONTACTLESS DATA (encoding stops) ScrollingEMPTY FEEDER & PRESS BUTTON ScrollingCleaningCLEANING PRINTER BlinkingREMOVE RIBBON THEN CLOSE HEAD ScrollingEMPTY FEEDER & PRESS BUTTON ScrollingLOAD CLEANING CARD INTO FEEDER ScrollingPRESS BUTTON TO CONTINUE ScrollingFEED LONG CLEANING CARD IN EXIT Scrolling](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-15.png)
![4 P430i User’s Manual 980470-001 Rev. AIntroductionControls, Connectors, and IndicatorsCLEANING PRINTER BlinkingErrors (Printer will not operate)BROKEN RIBBON BlinkingOUT OF RIBBON BlinkingMECHANICAL ERROR BlinkingOUT OF CARDS BlinkingPRINT HEAD OPEN BlinkingCHECK RIBBON BlinkingREJECT BOX FULL BlinkingLID OPEN FixedCOMMAND ERROR BlinkingMessage Mode](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-16.png)
![980470-001 Rev. A P430i User’s Manual 52Installation and SetupGeneral InformationThis section will guide you through the installation and setup of your P430i Card Printer. This consists of the following procedures, which should be performed in the order presented.• Unpacking the Printer• Installing the Print Driver Software and Setting Driver Options• Loading a Ribbon• Installing the Card Cleaning Cartridge• Setting the Card Thickness Control• Loading Cards• Connecting the Printer to your Computer• Connecting Power• Printing a Test Card to verify printer operationThe procedure to be followed for Packing the Printer for Shipment is given at the end of this section.The printer should be placed in a location that allows easy access to all sides. The printer should never be operated while resting on its side or upside down.](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-17.png)
![6 P430i User’s Manual 980470-001 Rev. AInstallation and SetupUnpacking the PrinterUnpacking the PrinterYour P430i Card Printer ships in a carton and protective anti-static bag. Keep all packaging material in case you need to move or re-ship the printer.1. Inspect the shipping container to ensure that no damage has occurred during shipment. If any damage is apparent, file a claim with the shipper.2. Unlatch and remove the handles on either end of the shipping container, as shown in the figure below.3. (See the figure on the next page as you perform the following steps.) Lift the upper part of the shipping container off of the lower part (which will still hold the printer and its packing material).4. Remove the packing material around the top of the printer.Electric Shock Caution • Limit AC power supplied to the P430i Printer to 100 – 230 volts, 60 ~ 50 Hertz. Limit excess current draw to 16 amps or less, using an associated circuit breaker or other such device. Never operate the printer in a location where operator, computer, or printer can get wet. Personal injury could result. The printer must be connected to an earthed electrical power source and properly protected against electrical surges and grounding faults; the electrical reliability of the printer is based on the reliability of the mains power source and with the earth connection.The printer’s power supply is an internal unit that can only be serviced or replaced by trained and authorized personnel.UP](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-18.png)
![Installation and SetupUnpacking the Printer980470-001 Rev. A P430i User’s Manual 75. Lift the printer out of the carton by holding it with both hands.6. Please ensure that you have a clean and nearly dust free environment for proper operation and storage of the printer.7. Make sure the following items are included with your P430i printer:](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-19.png)
![8 P430i User’s Manual 980470-001 Rev. AInstallation and SetupUnpacking the PrinterIf any items are missing, please contact your dealer. To reorder, please refer to Appendix D of this manual.8. Remove packing tape securing the printer’s Main Cover and Card Feeder Cover.9. Your P430i Printer ships with warning tape where the Card Cleaning Cartridge will be installed, and a pad that protects the print head from possible damage in shipment. To remove the tape and pad, follow the following steps:a. Open the printer’s main lid by lifting at its lower front lip.Power Cables (2)Cleaning KitCD-ROM with Driver Wizard and User’s ManualCard Cleaning CartridgeUSB CableDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-20.png)
![Installation and SetupUnpacking the Printer980470-001 Rev. A P430i User’s Manual 9b. Locate the Print Head protection pad and the Card Cleaning Cartridge location tape (see below). Remove the tape.c. Release the Print Head Carriage by pushing the Print Head Carriage Latch to the left, and raise the Print Head Carriage. It will remain open at about a 45° angle.INSTALLRemove mePrint Head Protection PadCard Cleaning Cartridge Location TapePrint Head Carriage LatchDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-21.png)
![10 P430i User’s Manual 980470-001 Rev. AInstallation and SetupInstalling the Print Driver Software and Setting Driver Optionsd. Remove the print head protection pad. Keep the pad, as well as the other packing material and the shipping carton, in case the printer is shipped or moved. If the original material is lost, a replacement Shipping Kit can be ordered from your reseller.Installing the Print Driver Software and Setting Driver OptionsPrinting with the P430i Printer requires the Windows Printer Driver and your card design/issuing software or printer command level programming through the printer interface.The P430i Card Printer can be used with any Windows 2000 or Windows XP computer, using the drivers provided on CD with the printer.This section contains information on the printing of a sample card in color (using the 5-panel color ribbon YMCKO and the Windows Printer Driver).Installing the P430i Print Driver To install the P430i Printer Driver automatically on all Operating Systems, use the Zebra Install Wizard.The Install Wizard will walk you through the appropriate installation steps. The Wizard will:• Automatically launch when the driver CD is inserted. • From the main menu of your documentation CD, select your desired language and then select “DRIVERS” from the subsequent menu. The Install Wizard will walk you through the appropriate steps.Note • If updating the printer driver from a previous version, before installing the updated printer driver version, always delete the existing version from your computer.Note • Ensure that you have administrative privileges to perform this installation, or contact your IT department.Dual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-22.png)
![Installation and SetupLoading a Ribbon980470-001 Rev. A P430i User’s Manual 11• Delete previous versions of the driver and clean up any necessary Registry entries. You must select “Remove” from the install options to remove any previous driver versions.Loading a Ribboni Series Printers require the use of i Series ribbons for full color printing. The Resin Thermal Transfer and Dye Sublimination ribbons for P430i are specifically designed for your P430i Printer.1. Place the printer power switch in the OFF (0) position.2. If the printer’s Main Lid is closed:a. Open the printer’s Main Lid; lift it by the lip at the bottom front as shown in the figure below left.b. Raise the Print Head Carriage by pressing the release latch to the left (toward the output hopper) and lifting as shown below to about a 45° angle. The Print Head Carriage will stay in that position, as shown at the right below.Electrostatic Discharge Caution • DO NOT TOUCH the Print Head or the electronic components on the Print Head Carriage. Discharges of electro-static energy that accumulate on the human body or other surfaces can damage the Print Head or other electronic components used in the printer.Note • Avoid any direct contact with the print head to prevent transfer of oils or contamination. Outside of normal operation, only the Zebra-approved cleaning materials should come in contact with the print head.Dual-Sided ColorDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-23.png)
![12 P430i User’s Manual 980470-001 Rev. AInstallation and SetupLoading a Ribbon3. Locate the Ribbon Supply Spindle and the Ribbon Take-up Spindle (see above). Load ribbon onto the supply spindle (under the print head carriage) flange side in, and load the empty core (with tape attached) onto the take-up spindle. Make sure the ribbon comes off the top of the supply spindle and feeds to the top of the take-up spindle.Dual-Sided ColorRibbon Supply SpindleRibbon Take-up SpindleDual-Sided ColorFlangeSupply SpoolTake-up Spool](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-24.png)
![Installation and SetupLoading a Ribbon980470-001 Rev. A P430i User’s Manual 134. Gently press the print head carriage down until it is fully lowered, as shown below. Very little force is neccessary to perform this step.Note • During normal operation (with power connected and turned on), the ribbon would automatically synchronize when the Print Head is restored to its fully-down position. The ribbon would be identified and the corresponding parameters sent to the driver.Since power is not connected at this point in the Installation and Setup Procedure, nothing will happen when the Print Head Carriage is closed. The ribbon will synchronize when power is turned on.Caution • Do not touch the print head if the printer has been in service within the last 10 minutes. It could be very hot and cause a burn.Electrostatic Discharge Caution • A static discharge is possible if you touch any exposed metal parts. Use of an anti-static wrist strap or comparable anti-static protection is required.Dual-Sided ColorDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-25.png)
![14 P430i User’s Manual 980470-001 Rev. AInstallation and SetupInstalling the Card Cleaning CartridgeInstalling the Card Cleaning CartridgeThe Card Cleaning Cartridge cleans the cards entering the printer. The Card Cleaning Cartridge consists of a Cartridge Frame and an Adhesive Roller, which are packed together.1. Remove the Cartridge Frame and the Adhesive Roller from their packaging. Insert the Adhesive Roller into the Cartridge Frame, as shown below. To avoid contamination, always hold the frame and the roller by the ends..2. Peel the protective wrapper from the Adhesive Roller.3. If the printer’s Main Lid is closed, open it. Locate the area where the Card Cleaning Cartridge will be installed (initially, this area was covered by a warning tape).Dual-Sided ColorCard Cleaning Cartridge Mounting Location](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-26.png)
![Installation and SetupInstalling the Card Cleaning Cartridge980470-001 Rev. A P430i User’s Manual 154. Locate the slot at the rear of the Card Cleaning Cartridge mounting location; see below.5. Hold the Card Cleaning Cartridge by the extended “handle” (so the large arrow on the top is pointing away from you). With the cartridge at about a 30° angle (pointing downward), insert the lip of the cartridge into the slot, until the cartridge seats against the back wall. Then press the front of the cartridge down until it seats all the way down and latches with an audible “click”. See below.6. Close the printer’s Main Lid.Dual-Sided ColorCard Cleaning SlotCard Cleaning Cartridge in final position](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-27.png)
![16 P430i User’s Manual 980470-001 Rev. AInstallation and SetupSetting the Card Thickness ControlSetting the Card Thickness ControlThe Card Thickness Control is set by the user to adjust the gap as cards enter the printer, to prevent double-feeds (which could cause a jam) or mis-feeds.1. Open the Card Feeder cover. The cover is hinged; lift it by the lip at the right front corner.2. The Card Thickness Control Lever is at the front of the left-side opening of the Card Feeder area.Note • Set the Card Thickness Control before loading cards.Note • To reduce contamination and ensure better print quality, minimize the time the Card Feeder cover is open.Dual-Sided ColorCard Thickness ControlDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-28.png)
![Installation and SetupSetting the Card Thickness Control980470-001 Rev. A P430i User’s Manual 173. There are four detents to set the position of the Card Thickness Control. Slide the Card Thickness Control to the position corresponding to the following:Detent Position Card ThicknessHighest 50 mil (1.27 mm) to 60 mil (1.52 mm)3rd position 30 mil (0.76 mm) to 50 mil (1.27 mm)2nd position 20 mil (0.51 mm) to 40 mil (1.02 mm)Lowest 10 mil (0.25 mm) to 20 mil (0.51 mm)Note • The overlap in settings above accomodates variations in environmental conditions (especially humidity) and cards from different manufacturers. In general, start at the lowest position and move the lever up until cards feed reliably.Note • “60 mil” (“1.524 mm”) cards may have a significant variation (over 10%) in the actual thickness of the cards; do not use these cards unless each card has been measured to have a thickness less than 66 mil (1.676 mm).](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-29.png)
![18 P430i User’s Manual 980470-001 Rev. AInstallation and SetupLoading CardsLoading CardsThis section shows how to load plastic cards into the P430i Printer. The P430i can use cards with a range of thickness from 10 mil (0.25 mm) to 60 mil (1.5 mm). The P430i Printer can also load and print cards fed individually. Information on this is given in the next chapter.The plastic cards generally come in decks of 100 cards; the Card Feeder can hold a full deck of 100 30-mil cards. Cards sometimes will stick together; this can cause mis-feeding or double-feeding. To avoid this, separate the cards before loading, as described in steps 2 through 4 below.1. If the Card Feeder cover is closed, open it. The cover is hinged; lift it by the lip at the right front corner.Note • Do not mix cards of different thicknesses!Note • DO NOT bend cards or touch print surfaces as this can reduce print quality. The surface of the cards must remain clean and dust free. Always store cards in an enclosed container. Ideally, use cards as soon as possible.Note • For cards with magnetic stripe, refer to Appendix A for loading instructions.Note • To reduce contamination and ensure better print quality, minimize the time the Card Feeder cover is open.Caution • Do not touch print surfaces of the cards; this can reduce print qualityDual-Sided ColorDual-Sided Color](https://usermanual.wiki/Zebra-Technologies/P430I-UHF.user-manaul-part-1-of-2/User-Guide-933230-Page-30.png)