Zebra Technologies MC319ZUS Mobile Computing Terminal User Manual Integrator Guide

Zebra Technologies Corporation Mobile Computing Terminal Integrator Guide

Contents

Integrator Guide

MC319Z RFID Mobile ComputerIntegrator Guide
MC319Z RFID Mobile ComputerIntegrator Guide72E-146158-01Revision AFebruary 2011
ii MC319Z RFID Mobile Computer Integrator Guide© 2011 Motorola Solutions, Inc. All rights reserved.No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.Motorola reserves the right to make changes to any software or product to improve reliability, function, or design.Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products.MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.Motorola Solutions, Inc.One Motorola PlazaHoltsville, New York 11742-1300http://www.motorola.comWarrantyFor the complete Motorola hardware product warranty statement, go to: http://www.motorola.com/enterprisemobility/warranty.
iiiRevision HistoryChanges to the original manual are listed below:Change Date Description-01 Rev A 2/2011 Initial release
iv MC319Z RFID Mobile Computer Integrator Guide
Table of ContentsAbout This GuideIntroduction .................................................................................................................... viiConfigurations................................................................................................................ viiChapter Descriptions ..................................................................................................... viiiNotational Conventions.................................................................................................. viiiRelated Documents and Software................................................................................. ixService Information........................................................................................................ ixChapter 1: Getting StartedIntroduction ................................................................................................................... 1-1RFID Technology Overview .......................................................................................... 1-1RFID Components .................................................................................................. 1-2MC319Z RFID Mobile Computer .................................................................................. 1-3MC319Z RFID Mobile Computer Parts ................................................................... 1-4MC319Z RFID Mobile Computer LEDs ................................................................... 1-5Reading Tags ............................................................................................................... 1-5Chapter 2: Updating the Mobile ComputerIntroduction ................................................................................................................... 2-1Updating the Device Image .......................................................................................... 2-1Downloading an Update Loader Package .............................................................. 2-1Updating Images via ActiveSync ............................................................................ 2-1Updating Images via AirBEAM ................................................................................ 2-2Updating the RFID Firmware ........................................................................................ 2-2Chapter 3: MobileRFID FunctionalityIntroduction ................................................................................................................... 3-1MobileRFID Icons ......................................................................................................... 3-2MobileRFID Menu ......................................................................................................... 3-3Configure Region .................................................................................................... 3-4Configure RFID ....................................................................................................... 3-7
vi MC319Z RFID Mobile Computer Integrator GuideVersion Information ................................................................................................. 3-8Run/Stop RFID ........................................................................................................ 3-9Chapter 4: RFID Sample ApplicationIntroduction ................................................................................................................... 4-1Launching the RFID Sample Application ...................................................................... 4-2Connection .................................................................................................................... 4-3Capabilities ................................................................................................................... 4-4Configuration Menu Options ......................................................................................... 4-5Tag Storage Settings .............................................................................................. 4-5Antenna ................................................................................................................... 4-6RF Mode ................................................................................................................. 4-7Singulation .............................................................................................................. 4-8Power On/Off Radio ................................................................................................ 4-9Reset to Factory Default ......................................................................................... 4-9Operations Menu Options ............................................................................................. 4-10Antenna Info ............................................................................................................ 4-10Filter ........................................................................................................................ 4-11Access .................................................................................................................... 4-14Triggers ................................................................................................................... 4-18Management Menu Options ......................................................................................... 4-24Help Menu .................................................................................................................... 4-24Exit ................................................................................................................................ 4-24Chapter 5: Tag LocatorIntroduction ................................................................................................................... 5-1Using Tag Locator ........................................................................................................ 5-2Locating Tags Using a .csv File .................................................................................... 5-3Chapter 6: TroubleshootingIntroduction ................................................................................................................... 6-1Troubleshooting ............................................................................................................ 6-1Appendix A: Technical SpecificationsTechnical Specifications ............................................................................................... A-1Appendix B: RFID APIsIndex
About This GuideIntroductionThis MC319Z RFID Integrator Guide provides the unique set up and operating procedures for the MC319Z RFID mobile computers. This guide is intended as a supplement to the MC3000 Integrator Guide, p/n 72E-68900-xx. Procedures common to MC3000 products are addressed in the MC3000 Integrator Guide.ConfigurationsAll MC319Z models support the following features:•Windows Mobile 6.5 Platform•256 MB RAM / 1 GB Flash•48-key alphanumeric keypad•Color display •WLAN 802.11 a/b/g radio•BluetoothThis guide covers the following configurations:NOTE Screens and windows pictured in this guide are samples and may differ from actual screens.Configuration Country Support Power Data CaptureMC319Z-GL4H24EIW Worldwide 1 W Laser, RFIDMC319Z-GL4H24EIE Europe 0.5 W Laser, RFIDMC319Z-GI4H24EIW Worldwide 1 W Imager, RFIDMC319Z-GI4H24EIE Europe 0.5 W Imager, RFID
x MC319Z RFID Mobile Computer Integrator GuideChapter DescriptionsTopics covered in this guide are as follows:•Chapter 1, Getting Started provides an overview of RFID technology and components and a description of the MC319Z RFID mobile computer and features.•Chapter 2, Updating the Mobile Computer describes how to update the device image and radio firmware.•Chapter 3, MobileRFID Functionality includes information on configuring the RFID radio and reading tags.•Chapter 4, RFID Sample Application provides information on the RFID sample application and how to use it to assist in custom application development.•Chapter 5, Tag Locator provides information on the appliation used to detect the location of a tag.•Chapter 6, Troubleshooting describes MC319Z RFID mobile computer troubleshooting procedures. •Appendix A, Technical Specifications includes the technical specifications for the reader.•Appendix B, RFID APIs provides a reference for information on supported RFID APIs.Notational ConventionsThe following conventions are used in this document:•“Mobile computer” or “reader” refers to the MC319Z RFID mobile computer. •Italics are used to highlight the following:•Chapters and sections in this and related documents•Dialog box, window, links, software names, and screen names•Drop-down list, columns and list box names•Check box and radio button names•Icons on a screen •Bold text is used to highlight the following:•Dialog box, window and screen names•Drop-down list and list box names•Check box and radio button names•Icons on a screen•Key names on a keypad•Button names on a screen•Bullets (•) indicate:•Action items•Lists of alternatives•Lists of required steps that are not necessarily sequential.•Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
About This Guide xiRelated Documents and SoftwareThe following documents provide more information about the reader.•MC319Z RFID Mobile Computer Quick Start Guide, p/n 72-146160-xx•MC319Z RFID Mobile Computer Regulatory Guide, p/n 72-146159-xx•MC3000 Mobile Computer User Guide, p/n 72E-68899-xx•MC3000 Mobile Computer Integrator Guide, p/n 72E-68900-xx•Microsoft Applications for Windows Mobile 6 User Guide, p/n 72E-108299-xx•Application Guide for Motorola Enterprise Mobility Devices, p/n 72E-68902-xx•Wireless Fusion Enterprise Mobility Suite User Guide for Version 3.00, p/n 72E-122495-xx•Mobility Services Platform 3.2 User’s Guide, p/n 72E-100158-xx•MC319Z RFID Enterprise Mobility Developer KitFor the latest version of this guide and all guides, go to: http://supportcentral.motorola.com.Service InformationIf you have a problem with your equipment, contact Motorola Solutions support for your region. Contact information is available at: http://supportcentral.motorola.com. When contacting Motorola Solutions support, please have the following information available:•Serial number of the unit •Model number or product name •Software type and version number Motorola responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements.If your problem cannot be solved by Motorola Solutions support, you may need to return your equipment for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty.If you purchased your business product from a Motorola business partner, please contact that business partner for support.
xii MC319Z RFID Mobile Computer Integrator Guide
Chapter 1 Getting StartedIntroductionThis chapter provides an overview of RFID technology and components, and describes the MC319Z RFID mobile computer and its features.RFID Technology OverviewRFID (Radio Frequency Identification) is an advanced automatic identification (Auto ID) technology that uses radio frequency signals to identify tagged items. An RFID tag contains a circuit that can store data. This data may be pre-encoded or can be encoded in the field. The tags come in a variety of shapes and sizes. To read a tag the mobile computer sends out radio frequency waves using its integrated antenna. This RF field powers and charges the tags, which are tuned to receive radio waves. The tags use this power to modulate the carrier signal. The reader interprets the modulated signal and converts the data to a format for computer storage. The computer application translates the data into an understandable format.Figure 1-1 RFID System ElementsHost ComputerTagsMobile ComputerWireless LAN/ BT/ActiveSyncRF Wave and Response
1 - 2 MC319Z RFID Mobile Computer Integrator GuideRFID ComponentsMotorola RFID solutions offer low cost, long read range, and a high read rate. These features provide real time end-to-end visibility of products and assets in the factory, distribution center, retail outlet, or other facility. The MC319Z RFID system consists of the following components: •Silicon-based RFID tags that attach to retail products, vehicles, trailers, containers, pallets, boxes, etc.•An integrated antenna that supports applications such as item level tracking and asset tracking.•An embedded radio module that powers and communicates with tags for data capture and provides host connectivity for data migration.TagsTags contain embedded chips that store unique information. Available in various shapes and sizes, tags, often called transponders, receive and respond to data requests. Tags require power to send data. There are several categories of tags based on the protocol they support, read/write memory, and power options:•Active RFID tags are powered by internal light-weight batteries, and also use these batteries to broadcast radio waves to the reader. •Semi-passive RFID tags are also powered by internal light-weight batteries, but draw broadcasting power from the reader. •Passive RFID tags are powered by a reader-generated RF field. These tags are much lighter and less expensive than active tags, and are typically applied to less expensive goods. AntennaAntennas transmit and receive radio frequency signals. Radio ModuleThe radio module communicates with the tags and transfers the data to a host computer. It also provides features such as filtering, CRC check, and tag writing. The MC319Z RFID mobile computer supports standard RFID tags as described by EPCGlobalTM Class 1 Gen2 protocol.
Getting Started 1 - 3MC319Z RFID Mobile ComputerThe Motorola MC319Z RFID mobile computer includes an intelligent C1G2 UHF RFID reader with RFID read performance that provides real-time, seamless EPC-compliant tags processing. MC319Z RFID mobile computers are designed for indoor inventory management and asset tracking applications, and can host third-party, customer-driven embedded applications. Features include: •ISO 18000-6C standard (EPC Class 1 Gen 2)•Read, write, kill, lock, block write/block erase, and permalock functionality•48-key alphanumeric keypad•3” color display•Orientation-insensitive integrated external antenna•Laser-based bar code reader - reads 1D bar codes•Windows® Mobile 6.5•WLAN 802.11 a/b/g wireless connectivity•Application-specific setup for ease of installation•Low Level Reader Protocol (LLRP)•Sample application and support for custom or third-party applications•RFID API support•Event and tag management supportFigure 1-2 MC319Z RFID Mobile Computer
1 - 4 MC319Z RFID Mobile Computer Integrator GuideThe MC319Z RFID mobile computer provides a wide range of features that enable implementation of complete, high-performance, intelligent RFID solutions. MC319Z RFID Mobile Computer PartsFigure 1-3 MC319Z RFID Mobile Computer PartsNOTE The MC319Z RFID mobile computer supports a 2x battery only; do not use a 1x battery.The Four-Slot Cradle does not accommodate the MC319Z RFID mobile computer.Due to component tolerances, some users may experience undesired behavior when using battery part number 55-060112-xx. If the unit turns off without proper warning messages during heavy use, use battery 55-002152-xx (p/n 82-127909-xx). KeypadRFID ModuleDisplayPowerScan ButtonBeeperTriggerScan LED Indicators (red/green)Charge LED Indicator (amber)Scan LED Indicator (red/green)
Getting Started 1 - 5MC319Z RFID Mobile Computer LEDsThe mobile computer LEDs indicate charging and reader status as described in Table 1-1.Reading TagsTo read RFID tags: 1. Remove the MC319Z from AC power and ensure the LLRP icon is green.2. Use an RFID reader application to enable tag reading. For a sample application, browse to the MC319Z Application directory and select RFIDSample3Plus.exe. See Chapter 4, RFID Sample Application.3. Aim the mobile computer at the tag, oriented horizontally or vertically depending on the tag orientation. The distance between the tag and the antenna is the approximate read range.4. Press the trigger or tap the on-screen Read command within the application to interrogate all RFID tags within the radio frequency (RF) field of view and capture data from each new tag found. Release the trigger or tap the Stop Read command to stop interrogating tags.Table 1-1 LED Status IndicatorsLED IndicationCharging IndicatorsOff Mobile computer not placed correctly in the cradle; cable not connected correctly; charger is not powered.Fast Blinking Amber Error in charging; check placement of mobile computer. Slow Blinking Amber Mobile computer is charging.Solid Amber Charging complete.Note: When the battery is initially inserted in the mobile computer, the amber LED flashes once if the battery power is low or the battery is not fully inserted.NOTE When connected to power, the mobile computer cannot read RFID tags.
1 - 6 MC319Z RFID Mobile Computer Integrator Guide
Chapter 2 Updating the Mobile ComputerIntroductionThis chapter describes how to update the device image and radio firmware.Updating the Device ImageWindows Mobile contains an Image Update feature that updates all operating system components. Motorola distributes all updates as update packages on the Support Central Web Site http://www.motorola.com/enterprisemobility/support. These packages contain either partial or complete updates for the operating system.To update an operating system component, copy the update package to the mobile computer using ActiveSync, AirBEAM, or MSP. Downloading an Update Loader Package1. Download the appropriate update loader package from the Motorola Support Central web site http://www.motorola.com/enterprisemobility/support to a host computer.2. Locate the update loader package file on the host computer and un-compress the file into a separate directory:•30XXw61RFIDSCxxxxx.zip for updating via ActiveSync•30XXw61RFIDABxxxxx.zip for updating via AirBEAMUpdating Images via ActiveSyncTo install an update loader package using ActiveSync:1. Insert the mobile computer into the cradle and connect the cradle to AC power. 2. Connect the mobile computer to the host computer using ActiveSync. 3. In ActiveSync on the host computer, open Explorer for the mobile computer.4. Copy the contents of 3190w65MenUL02270X\UpdateLoader (the files only, not the folder) into the \Storage Card folder on the mobile computer.
2 - 2 MC319Z RFID Mobile Computer Integrator Guide5. On the mobile computer, navigate to the \Storage Card folder and tap the program STARTUPDLDR.EXE. The update takes approximately 10 minutes. Do not remove AC power during this time.6. Copy MCRFIDInstall.CAB into the \Storage Card folder on the mobile computer.7. On the mobile computer, navigate to the \Storage Card folder and tap MCRFIDInstall.CAB. The device reboots after the installation with RFID operational. Updating Images via AirBEAMInstall the AirBEAM package files within 30XXw61RFIDABxxxxx.zip in sequence:1. 30XXw61MenUPRXXXXX.apf2. 30XXw61RFIDPkgXXXX.apf30XXw61RFIDPkgXXXX.apf executes silently and the mobile computer boots after installation, which takes approximately 7-10 seconds. Refer to the MC3000 Integrator Guide for more information on AirBEAM.Updating the RFID FirmwareThe RFID_FLASH utility, used to update the RFID radio firmware, is no longer provided. For related issues, contact Motorola Solutions support.
Chapter 3 MobileRFID FunctionalityIntroductionMobileRFID is an RFID server application that runs in the background on the mobile computer. The MobileRFID icon appears in the system tray. This chapter includes information on using and configuring MobileRFID.Figure 3-1 MobileRFID Icon
3 - 2 MC319Z RFID Mobile Computer Integrator GuideMobileRFID IconsThe MobileRFID icon indicates RFID radio status as described in Table 3-1.Table 3-1 MobileRFID Icon IndicatorsIcon IndicationRFID running, radio on.RFID running, radio off.RFID stopped (radio not found/battery critical/stopped from user interface).RFID critical (radio muted, laser enabled).*RFID warning (Tx low power).**RFID critical and RFID warning due to transmit low power is not applicable to the MC319Z.
MobileRFID Functionality 3 - 3MobileRFID MenuIf using RFID as the Windows default home screen, tap the RFID panel, then tap the Settings button.Figure 3-2 MobileRFID Home Window and Settings WindowIf not using RFID as the Windows default home screen, tap the MobileRFID icon in the system tray. A menu appears.Figure 3-3 MobileRFID Icon Menu
3 - 4 MC319Z RFID Mobile Computer Integrator GuideConfigure Region Upon StartupAfter upgrading the mobile computer, the following window appears on startup.Figure 3-4 Country Not Set Window1. Tap ok. When no country is selected, the Region Configuration window appears.Figure 3-5 Region Configuration Window
MobileRFID Functionality 3 - 52. Select the region of operation and communication standard as allowed by the regulatory standards of that country/region from the drop-down menus. The following warning message appears.Figure 3-6 Region Selection Warning Message3. Tap Yes to confirm. A window appears indicating success.Figure 3-7 Region Selection Success Window
3 - 6 MC319Z RFID Mobile Computer Integrator GuideAfter StartupIf not done at startup, set the regulatory region as follows:1. Invoke the MobileRFID menu, then tap Configure Region.2. In the Region Configuration window, select a region from the Region of Operation drop-down menu.Figure 3-8 Region Configuration Window3. Tap Yes on the warning window that appears. A confirmation window appears upon successful completion.Figure 3-9 Region Selection Success Window4. Tap ok.
MobileRFID Functionality 3 - 7Configure RFID RFID is in Server Mode by default. To configure RFID to operate in Client Mode:1. Invoke the MobileRFID menu, then tap Configure RFID.Figure 3-10 RFID Configuration Window2. Select the Client Mode check box. 3. In the LLRP Port field, enter the port number on which the server waits for the RFID client to communicate. The default is 5084.4. In the Server IP field, enter the server IP for the remote host to which RFID communicates as a client.5. Tap Apply.6. Tap ok to close the window.
3 - 8 MC319Z RFID Mobile Computer Integrator GuideVersion InformationTo view software version information for the RFID application, invoke the MobileRFID menu, then tap About.Figure 3-11 About MobileRFID WindowThis window displays the MobileRFID application version, radio library version, radio firmware version, and radio OEM data version.NOTE The version information in Figure 3-11 may differ from the information on the actual mobile computer screen.
MobileRFID Functionality 3 - 9Run/Stop RFIDTo stop RFID servic,e tap Stop in MobileRFID menu. This frees the RFID radio.Figure 3-12 RFID StoppedTo restart RFID, tap Run in MobileRFID menu.
3 - 10 MC319Z RFID Mobile Computer Integrator Guide
Chapter 4 RFID Sample ApplicationIntroductionThe RFID Application CS_RFID3Sample6.exe provides an overview of how the application works and assists application developers in developing custom applications. The mobile computer can read, write, lock, kill, and program Gen2 tags. Each tag contains the EPC number (64 or 96 bits), CRC, and kill code. The mobile computer can also collect data by decoding in-range EPC Gen2 RFID tags. Initiating the read command within the sample application causes the mobile computer to interrogate all RFID tags within the radio frequency (RF) field of view. The reader captures data from each new tag and adds it to the list box in the EPC ID window. Select Stop Read to stop interrogating tags.
4 - 2 MC319Z RFID Mobile Computer Integrator GuideLaunching the RFID Sample ApplicationSelect RFID Demo in the Start menu to start the RFID sample application.Figure 4-1 RFID Demo IconFigure 4-2 RFID Sample Application Window
RFID Sample Application 4 - 3In the sample application window:•Tap the Start Reading button to initiate the tag read. Tap Stop Reading to terminate tag reading.•Use the Mem Bank drop-down to select a tag memory bank to read. The default memory bank is EPC (None). Other options are TID, Reserved, and User.ConnectionTap Connection to display the reader IP and port number. Figure 4-3 Connection WindowSelect Disconnect to disconnect the reader.
4 - 4 MC319Z RFID Mobile Computer Integrator GuideCapabilitiesSelect Menu > Capabilities to view the capabilities of the connected reader.Figure 4-4 Capabilities Window
RFID Sample Application 4 - 5Configuration Menu OptionsThe Configuration menu includes the following options: •Tag Storage Settings •Antenna •RF Mode •Singulation •Power On/Off Radio •Reset to Factory Defaults Tag Storage SettingsSelect Menu > Config > Tag Storage Settings to view/configure tag storage settings. Figure 4-5 Tag Storage Settings WindowThis window includes the following fields: •Maximum Tag Count - The maximum number of tags to store in the DLL. •Max Tag ID Length - The maximum tag length. •Max Size of Memory Bank - Storage to allocate for the memory bank's data. •Apply - Select to apply the configuration changes.
4 - 6 MC319Z RFID Mobile Computer Integrator GuideAntennaSelect Menu > Config > Antenna to view/configure the antenna. Figure 4-6 Antenna Configuration WindowThis window includes the following fields: •Antenna ID - Selecting an antenna ID updates the configuration values in the other fields. •Receive Sensitivity (dB) - Lists the reader-supported values for the selected antenna. •Transmit Power (dBm) - Lists the reader-supported values for the selected antenna. •Hop Table Index - Updates the Hop Frequency list with its corresponding frequencies. •Apply - Select to apply the configuration changes.
RFID Sample Application 4 - 7RF ModeSelect Menu > Config > RF Mode to view/configure the RF mode for each antenna.Figure 4-7 RF Mode WindowThis window includes the following fields:•Antenna ID - Selecting an antenna ID updates the configuration values in the other fields. •Tari Value - TARI specified in nsec. •RF Mode Table - RF mode table configured for the current antenna. •Apply - Select to apply the configuration changes.
4 - 8 MC319Z RFID Mobile Computer Integrator GuideSingulationSelect Menu > Config > Singulation to view/configure the singulation control settings for each antenna. Figure 4-8 Singulation Control Settings WindowThis window includes the following fields: •Antenna ID - Selecting an antenna ID updates the configuration values in the other fields. •Session - The session number for the inventory operation. •Tag Population - The approximate tag population in the RF field of the antenna. •Tag Transit Time - The time in milliseconds that the tag typically remains in the RF field of the antenna. •State Aware - Indicates if the antenna performs state aware or state unaware singulation. •Inventory State - Select a tag of state A or B. Valid only for State Aware singulation •SL Flag - Valid only for State Aware singulation •Apply - Select to apply the configuration changes.
RFID Sample Application 4 - 9Power On/Off RadioSelect Menu > Config > Power On/Off Radio to change the power settings of the RFID radio. Figure 4-9 Radio Power Settings MenuReset to Factory DefaultSelect Menu > Config > Reset to Factory Default to restore the default reader configuration.
4 - 10 MC319Z RFID Mobile Computer Integrator GuideOperations Menu OptionsThe Operations menu includes the following options: •Antenna Info •Filter •Access •Triggers Antenna InfoSelect Menu > Operations > Antenna Info to view/configure the list of antennas that can be used for inventory/access operations. Figure 4-10 Antenna Info Window
RFID Sample Application 4 - 11FilterSelect Menu > Operations > Filter to view/configure the following filters: •Pre-Filter •Post-Filter •Access-Filter Pre-FilterSelect Menu > Operations > Filter > Pre-Filter to view/configure pre-filters.Figure 4-11 PreFilter WindowThis window includes the following fields: •Antenna ID - Selecting an antenna ID updates the configuration values in the other fields. •Memory Bank - Memory bank on which the filter is applied. •Offset - The first (msb) bit location of the specified memory bank against which to compare the tag mask. •Tag Pattern - The pattern against which to compare the specified memory bank. •Filter Action - Select the required filter action. For more information, refer to the Gen2 specification available at http://www.epcglobalinc.org/standards/.
4 - 12 MC319Z RFID Mobile Computer Integrator GuidePost-FilterSelect Menu > Operations > Filter > Post-Filter to view/configure post-filters.Figure 4-12 PostFilter WindowThis window includes the following fields: •Memory Bank - Memory bank on which the filter is applied.•Offset - The first (msb) bit location of the specified memory bank against which to compare the tag mask. •Tag Pattern - The pattern against which to compare the specified memory bank. •Tag Mask - The bit mask to facilitate bit wise filtering.•Match Pattern - Select the tag pattern to match (A, B, both, or neither).
RFID Sample Application 4 - 13Access-FilterSelect Menu > Operations > Filter > Access-Filter to view/configure the access-filters. Figure 4-13 AccessFilter WindowSee Post-Filter on page 4-12 for field descriptions.
4 - 14 MC319Z RFID Mobile Computer Integrator GuideAccessSelect Menu > Operations > Access to perform the following access operations. Figure 4-14 Access MenuThe Access menu includes the following options: •Read •Write •Lock •Kill •Block Write •Block Erase
RFID Sample Application 4 - 15To perform an access option on a single tag, right-click the tag in the list of read tags on the main window to invoke the tag’s context menu.Figure 4-15 Tag Context MenuAccess Operation WindowsThe access operation windows include the following fields. Set options as required in the various parameter windows. Not all windows include all options.•Tag ID - The name of the selected tag. •Password - Set a password before performing any access operation (except Kill). •Memory Bank - Select the memory bank (Reserved, EPC, TID, User) •Offset - Offset of the first word to read from the selected memory bank. •Length - Tag/data length. •Write Data - The data to write to the selected tag (Write window only). •Lock Privilege - Access options for the selected tag (Write window only): •None - The can not change the lock privilege of the particular memory bank. •Read_Write - The user can read and write to the tag. •Perma_Lock - Permanent lock. •Perma_Unlock - Permanent unlock. •Unlock - The user can unlock the tag for writing.
4 - 16 MC319Z RFID Mobile Computer Integrator GuideFigure 4-16 Read Access Operation WindowFigure 4-17 Write / Block-Write Access Operation Window
RFID Sample Application 4 - 17Figure 4-18 Lock Access Operation WindowFigure 4-19 Kill Access Operation Window
4 - 18 MC319Z RFID Mobile Computer Integrator GuideFigure 4-20 Block Erase Access Operation WindowTriggersSelect Menu > Operations > Trigger to view/configure the following triggers: •Start Trigger •Stop Trigger •Report Trigger
RFID Sample Application 4 - 19Start TriggerFigure 4-21 Start Trigger - Periodic WindowFigure 4-22 Start Trigger - GPI Window
4 - 20 MC319Z RFID Mobile Computer Integrator GuideFigure 4-23 Start Trigger - Handheld Trigger WindowStop TriggerFigure 4-24 Stop Trigger - Periodic Window
RFID Sample Application 4 - 21Figure 4-25 Stop Trigger - GPI with Timeout WindowFigure 4-26 Stop Trigger - Tag Observation with Timeout Window
4 - 22 MC319Z RFID Mobile Computer Integrator GuideFigure 4-27 Stop Trigger - N Attempts with Timeout WindowFigure 4-28 Stop Trigger - Handheld Trigger with Timeout Window
RFID Sample Application 4 - 23Report TriggerFigure 4-29 Report Trigger Window
4 - 24 MC319Z RFID Mobile Computer Integrator GuideManagement Menu OptionsManagement options are not applicable for handheld readers.Help MenuSelect Menu > Help to display the version information. The version numbers displayed in this window are examples. Actual version numbers are based on the versions of the files on the device.Figure 4-30 Help WindowExitSelect Menu > Exit to exit the RFID sample application.
Chapter 5 Tag LocatorIntroductionUse Tag Locater to detect the location of a tag. By providing the TagID of an item, this application can find the relative position of the tag with respect to the mobile computer. Move the mobile computer back and forth to obtain the location of the tag as indicated by the beep frequency and a vertical progress bar showing the relative position of the tag.The Tag Locater application requires the following components/DLLs on the device:•RFIDAPI32.dll (Version 5.1.15 or higher)•Symbol.RFID3.Device.dll (Assembly version 1.1.0.1, File version 1.1.0.7 or higher)•Symbol.Audio.dll•Symbol.dll•Symbol.Notification.dll•Symbol.StandardForms.dll
5 - 2 MC319Z RFID Mobile Computer Integrator GuideUsing Tag LocatorTo use the Tag Locator application:1. Tap TagLocator in the Application folder on the mobile computer to open the Tag Locater application.Figure 5-1 Tag Locator2. Enter the tag ID in one of three ways: •Type the tag ID in the TagID text box, then select Locate or press and hold the trigger.•Perform a search operation by selecting the Search Tags button or by pressing and holding the trigger.•Select the Import Tags button to import a list of saved tags from a .csv file. See Locating Tags Using a .csv File on page 5-3.
Tag Locator 5 - 3Locating Tags Using a .csv File1. Select the Import Tags button to import a list of saved tags from a .csv file. The following window appears.Figure 5-2 Opening a .csv File2. Select the desired .csv file to import the tags to the list.Figure 5-3 Tag List3. Select a tag from the list to search.
5 - 4 MC319Z RFID Mobile Computer Integrator Guide4. Select the Locate button or press and hold the trigger. Move the mobile computer in all directions to get the relative position of the tag, indicated by a beep, the vertical progress bar, or both.Figure 5-4 Tag SearchUse the Options menu to turn the beeper on and off and to display data in ASCII or hexadecimal format.Figure 5-5 Options Menu
Chapter 6 TroubleshootingIntroductionTable 6-1 on page 6-1 provides troubleshooting information.TroubleshootingTable 6-1 TroubleshootingProblem Possible Causes Possible SolutionsMobile computer does not turn on. Lithium-ion battery not charged. Charge or replace the lithium-ion battery.Lithium-ion battery not installed properly. Ensure battery is installed properly. Refer to the MC3000 Mobile Computer Integrator Guide.System crash. Perform a warm boot. If the RFID reader still does not turn on, perform a cold boot. Refer to the MC3000 Mobile Computer Integrator Guide.Rechargeable lithium-ion battery did not charge. Battery failed. Replace battery. If the mobile computer still does not operate, try a warm boot, then a cold boot. Refer to the MC3000 Mobile Computer Integrator Guide.Mobile computer removed from cradle while battery was charging. Insert mobile computer in cradle and begin charging. The lithium-ion battery requires less than four hours to recharge fully.Mobile computer turns off without proper warning messages during heavy use.Due to component tolerances, this can occur when using battery part number 55-060112-xx.Use battery 55-002152-xx (p/n 82-127909-xx).No sound. Volume setting is low or turned off. Increase the volume setting.
6 - 2 MC319Z RFID Mobile Computer Integrator GuideTapping the window buttons or icons does not activate the corresponding feature.LCD screen not aligned correctly. Re-calibrate the screen.Battery is not inserted properly. Insert the battery properly. Refer to the MC3000 Mobile Computer Integrator Guide.A message appears stating that the mobile computer memory is full. Too many files stored on the mobile computer. Delete unused memos and records. Save these records on the host computer.Too many applications installed on the mobile computer.If additional applications have been installed on the RFID reader, remove them to recover memory.Tap Start > Settings > System tab > Remove Programs icon.Reader is not reading tags. The tag is out of its read range.Tags are damaged. Tags are not EPCgen2.Read application is not loaded.Move the tag into the read range. See Reading Tags on page 1-5.Use tags of good quality.Use EPCgen2 tags.Verify that the unit is loaded with a read application.Reader is not reading tags and the LLRP icon is red. The battery is cold or degraded. Recharge or replace the battery. If the problem still exists, exit and restart LLRP.Table 6-1 Troubleshooting (Continued)Problem Possible Causes Possible SolutionsNOTE If problems still occur, contact the distributor or call the local contact. See page xi for contact information.
Appendix A Technical SpecificationsTechnical SpecificationsThe following tables summarize the RFID reader intended operating environment and technical hardware specifications.Table A-1 Technical SpecificationsItem MC319Z RFIDPhysical and Environmental CharacteristicsDimensions 9.1 in. L x 3.6 in. W x 7.6 in. H23.1 cm L x 9.1 cm H x 19.3 cm HWeight 23 oz. / 650 g (includes battery, RFID, scanner, and radio)Keypad 48 keyTerminal Emulation (5250, 3270, VT)Display 3 in. 320 x 320 pixel colorBattery Extended capacity (2X) battery packPerformance CharacteristicsCPU Intel® XScale® Bulverde PXA270 processor at 624MHzOperating System Microsoft Windows Mobile 6.5Memory (RAM/ROM) 256 MB RAM/1 GB FlashApplication Development SMDKs available through the Support Web SiteData Capture Options Laser engine reads 1D symbologies with intuitive laser aiming.RFID reader reads Gen2 tags.
A - 2 MC319Z RFID Mobile Computer Integrator GuideLaser Decode Capability Code 39 Code 128 Code 93Codabar Code 11 Discrete 2 of 5Interleaved 2 of 5 EAN-8 EAN-13MSI UPCA UPCEUPC/EAN supplementals Coupon Code Trioptic 39Webcode GS1 DataBar GS1 DataBar LimitedGS1 DataBar Expanded EAN-128 TLC39Composite Code PDF417 Micro PDF417Macro PDF417 MSI Plessey Maxi CodeData Matrix US Planet UK 4-State Australian 4-State Canadian 4-State Japanese 4-StateDutch Kix Aztec USPS 4-State(US4CB)MicroQR User EnvironmentOperating Temperature -4°F to 122°F (-20°C to 50°C)Battery Charging Temperature 32° to 104° F (0° to 40° C) ambient temperature rangeStorage Temperature -25°F to 160°F (-40°C to 70°C)Humidity 0% to 95% non condensingDrop Specification Multiple 6 ft. (1.8m) drops to concrete across operating temperature rangeTumble 2,000 one-meter tumbles at room temperature (4,000 hits)Environmental Sealing IP64 ESD +/-15kVdc air discharge+/-8kVdc direct discharge+/-8kVdc indirect dischargeRFIDStandards Supported EPC Generation 2 UHF Nominal read range110 ft./3.04 m with the RFX6000 4x4 tag optimally oriented.Field Half read range beam width: +/- 80 degrees (with tags optimally oriented).Antenna Integrated, circularly polarized, 1.5 dB effective linear gain per axis (nominal); Antenna port for future support of optional external antenna. Frequency Range 902-928 MHzOutput power 1W conducted (1.4W EIRP with integrated antenna)Table A-1 Technical Specifications (Continued)Item MC319Z RFID
Technical Specifications A - 3Wireless Data CommunicationsWLAN 802.11a/b/gOutput Power 100mW U.S. and InternationalData Rate 802.11a: 54Mb per second802.11b: 11Mb per second802.11g: 54Mb per secondAntenna InternalFrequency Range: 802.11a: 5 GHz; country-dependent802.11b: 2.4 GHz; country-dependent802.11g: 2.4 GHz; country-dependentBluetooth Bluetooth® Version 1.2 with BTExplorer™ (manager) included Peripherals and AccessoriesCradles Single-slot availablePrinters Supports extensive line of Symbol approved printers, cables and accessoriesCharger 4-Slot universal battery chargerOther Accessories Cable Adapter Module; Magnetic Stripe Reader; Modem; Full set of holstersIn accordance with the SymbolPlus partner programTable A-1 Technical Specifications (Continued)Item MC319Z RFID
A - 4 MC319Z RFID Mobile Computer Integrator Guide
Appendix B RFID APIsRFID APIs are available in C and .NET. For information on supported RFID APIs, refer to the Enterprise Mobility Developer Kit (EMDK), available at http://supportcentral.motorola.comFor C, refer to the EMDK for C v2.1 or later. For .Net, refer to the EMDK for .NET v2.2 or later.
B - 2 MC319Z RFID Mobile Computer Integrator Guide
IndexAactivesync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1airbeam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2, 1-3APIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1Bbattery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1, A-1battery charging temperature . . . . . . . . . . . . . . . . . . A-2Ccharge LED indicator . . . . . . . . . . . . . . . . . . . . . . . . . 1-4configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiconfiguring MobileRFID . . . . . . . . . . . . . . . . . . . . . . . 3-7region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4connectionports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4sample application . . . . . . . . . . . . . . . . . . . . . . . 4-3conventionsnotational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viiiCPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1Ddata capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii, A-1demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3launching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1drop specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2Ffirmware update . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Hhumidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2IiconsMobileRFID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2image update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1activesync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1airbeam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2update loader . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Kkeypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii, A-1LLEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5locating tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1Mmemory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1MobileRFID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1client mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7configuring region . . . . . . . . . . . . . . . . . . . . . . . . 3-4icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3server mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Index - 2 MC319Z RFID Mobile Computer Integrator Guidestopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9version information . . . . . . . . . . . . . . . . . . . . . . . 3-8Ooperating system . . . . . . . . . . . . . . . . . . . . . . . . . vii, A-1operating temperature . . . . . . . . . . . . . . . . . . . . . . . . A-2Pports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4Rradio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2reading tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2regionconfiguring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4RFID APIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1RFID components . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2RFID firmware update . . . . . . . . . . . . . . . . . . . . . . . . 2-2RFID overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Ssample application . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3launching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2scan buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4scan LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4service information . . . . . . . . . . . . . . . . . . . . . . . . . . . .ixspecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1starting RFID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9stopping RFID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . A-2support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ixTtags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2locating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1problems reading . . . . . . . . . . . . . . . . . . . . . . . . 6-2reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5technical specifications . . . . . . . . . . . . . . . . . . . . . . . A-1temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1Uupdating device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1activesync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1airbeam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2RFID firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2update loader . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Vvolume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1Wweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1Windows Mobile 6.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
72E-146158-01 - Revision A - February 2011Motorola Solutions, Inc.One Motorola PlazaHoltsville, New York 11742, USA1-800-927-9626http://www.motorola.comMOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Solutions, Inc. All rights reserved.

Navigation menu