ZTE ZTEWP623 GSM Wireless Phone User Manual

ZTE Corporation GSM Wireless Phone Users Manual

Users Manual

1 ZTE WP623 GSM Wireless Phone User Manual
2 Copyright © 2008 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Edition: 1st edition, Jan. 2008
3Contents 1 General Information..............................................................6 1.1 Welcome...................................................................................... 6 1.2 Security........................................................................................ 6 1.3 For Your Safety ........................................................................... 6 1.4 Cleaning and Maintenance.......................................................... 9 1.5 Limit Warranty ............................................................................. 9 1.6 Limitation of Liability .................................................................... 9 2 Getting Started....................................................................11 2.1 Configuration ............................................................................. 11 2.2 Technical Specifications............................................................ 11 2.3 Key Instruction........................................................................... 13 2.4 LCD Screen Description ............................................................ 14 2.5 Installation ................................................................................. 14 2.5.1 Receiver............................................................................. 14 2.5.2 Antenna.............................................................................. 15 2.5.3 Adapter .............................................................................. 15 2.5.4 Power Supply..................................................................... 15 2.6 Switching Power ........................................................................ 15 2.6.1 Power-on ........................................................................... 15 2.6.2 Power-off............................................................................ 16 2.7 About SIM Card ......................................................................... 16 2.7.1 SIM Card............................................................................ 16 2.7.2 Usage of SIM Card ............................................................ 16 2.8 Connecting to Network .............................................................. 16 2.8.1 PIN Code and Phone Lock Code....................................... 16 2.8.2 Connecting the Network .................................................... 17 3 Basic Operations ................................................................18 3.1 Making a Call............................................................................. 18 3.1.1 Making a Domestic Call ..................................................... 18 3.1.2 Making an International Call .............................................. 18 3.1.3 Dialing a Number in the List............................................... 19 3.1.4 Hand-free........................................................................... 19 3.1.5 Redialing............................................................................ 19 3.2 Answering a Call........................................................................ 20 3.3 Call Information ......................................................................... 20 3.4 During a Call.............................................................................. 20 3.5 Menu Functions ......................................................................... 20 4 Messages ............................................................................22
4 4.1 New Message............................................................................ 22 4.2 Creating Message ..................................................................... 22 4.3 Inbox.......................................................................................... 23 4.4 Outbox ....................................................................................... 23 4.5 Preformatted Message .............................................................. 23 4.6 Message Settings ...................................................................... 23 5 Phone Menus ......................................................................25 5.1 Viewing Calls ............................................................................. 25 5.2 Calls Duration ............................................................................ 25 5.3 Diverting Calls ........................................................................... 26 5.4 Calls Firewall ............................................................................. 26 6 Settings ...............................................................................28 6.1 Phone Settings .......................................................................... 28 6.1.1 Language........................................................................... 28 6.1.2 Own Number...................................................................... 28 6.1.3 Fastkey Settings ................................................................ 28 6.2 Display Settings......................................................................... 28 6.3 Audio Settings ........................................................................... 29 6.4 Clock Settings............................................................................ 29 6.5 Call Settings .............................................................................. 29 6.5.1 Minute Minder .................................................................... 29 6.5.2 Call Waiting........................................................................ 29 6.6 Network Settings ....................................................................... 30 6.7 Security Settings........................................................................ 30 6.8 Factory Settings......................................................................... 31 7 Toolkit ..................................................................................32 7.1 Set Alarm................................................................................... 32 7.1.1 Normal Alarm ..................................................................... 32 7.1.2 Daily Alarm......................................................................... 32 7.2 Show Alarm ............................................................................... 32 8 Contacts in Names..............................................................33 8.1 About Names............................................................................. 33 8.2 Adding New Name..................................................................... 33 8.3 Viewing all Names ..................................................................... 34 8.4 Searching Names ...................................................................... 34 8.5 Editing Names ........................................................................... 35 8.6 Deleting Names ......................................................................... 35 8.7 Setting Names ........................................................................... 35 8.8 Batch Operation......................................................................... 35 9 Text Input.............................................................................37
59.1 Multitap Input ............................................................................. 38 9.2 Numbers Input ........................................................................... 38 9.3 eZiText Input.............................................................................. 38 9.4 Symbols Input............................................................................ 38 10 Troubleshooting................................................................39
6 1 General Information 1.1 Welcome Thank you for choosing ZTE WP623 GSM Wireless Phone (hereinafter referred to as "phone"). To guarantee your phone always works in its best condition, please read this manual carefully and keep it for future use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your phone. Please subject to the material object. ZTE operates a policy of continuous development, and reserves the right to update the technical specifications in this manual at any time without prior notice. 1.2 Security  If your phone is lost or stolen, please report to your service provider or agencies of banning the use of your lost SIM card and phone.  To prevent your phone from illegal use, please take the security measures as follows: ¾ Set PIN code of the SIM card. ¾ Set password of the phone. ¾ Set Incoming Call Bar. 1.3 For Your Safety To the Owner  Some electronic devices are susceptible to electromagnetic interference sent by phone if inadequately shielded. Please use phone at least 20 cm or as far away as you can from TV set, radio and other automated office equipment so as to avoid electromagnetic interference.  Operating phone may interfere with medical devices like hearing aides and pacemakers, or other medical devices in hospital. Consult a physician or the manufacturer of the medical device before using phone.  The phone with external antenna has been tested for compliance with FCC RF Exposure (SAR) limits and is complied with FCC RF exposure compliance requirements.  Be aware of the usage limitation when using phone at places such as oil warehouses, or chemical factories, where there are
7explosive gases or explosive products being processed, because even if your phone is in idle state, it still transmits radio frequency (RF) energy. Therefore, power off your phone if required.  Do not touch the antenna while calling. Otherwise it will affect the quality of calling and waste battery energy. The damaged antenna will cause slight burn while touching your skin.  Keep phone out of the reach of small children. Phone may cause injury if used as a toy.  Do not put other things on the terminal to avoid overlaying radiator.  Keep the antenna free from obstructions and position the antenna straight up. This will ensure best call quality.  The phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The phone may not cause harmful interference, and (2) the phone must accept any interference received, including interference that may cause undesired operation. Phone Use  Please use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body.  As your phone can produce electromagnetic field, do not place it near magnetic items such as computer disks.  Do not expose your phone to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices.  Prevent liquid from leaking into your phone.  Do not use your phone during thunderstorm.  Unplug the external power adapter or remove battery when your phone is not in use, esp. for a long period of time.  It is highly recommended to charge the battery before initial use. The battery might have been discharged during storage and delivery.  Do not unplug the connector of the data cable from phone, and not install or remove battery, when the power is on.  Keep phone power on and in service area when make emergency call. Enter emergency call number in status of standby (press MENU/SELECT key and then enter Phone lock code to Unlock the phone in Emergency mode when Phone Lock is ON), and then
8 press CALL/REDIAL key to send.  Do not attempt to disassemble the phone by yourself. Non-expert handling of the devices may damage them.  Do not attempt to disassemble the mobile phone and battery by yourself. Changes and modifications made to the phone without the approval of manufacturer could void your authority to operate this phone. Battery Using  The battery and the phone are separately deposited in the package and packed in well condition. Please make use of the battery carefully following the instructions.  Do not short-circuit the battery, as this can cause excessive heat and fire.  Do not store battery in hot areas or dispose of it in a fire to avoid explosion.  Never use any charger or battery damaged or worn out.  Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in familial rubbish. Warning: If the battery is broken, keep away from content. If it taints your skin, wash your skin with abundant fresh water and ask doctor for help if necessary. Safety and General Using in Vehicles  Before making or answering a call, you should pay attention to the local laws about using wireless phones and take them into account in practical use.  Safety airbag, brake, speed control system and oil eject system shouldn’t be affected by wireless transmitting. If you do meet problems above, please contact your automobile provider.  Please power off your phone when refueling your automobile, and so do the place where duplex wireless equipments are banned. Don’t put your phone together with flammable or explosive items, inner spark may cause fire. In Aircraft  Follow the restrictions in aircraft. Wireless devices can cause interference in aircraft.  Please power off your phone before taking off till landing. In order to protect airplane’s communication system from interference, it is never allowed to use phone when it is in flight. Using phone before
9the plane taking off should get aircrew’s permission according to safety regulations. 1.4 Cleaning and Maintenance  The phone is non-waterproof, please keep it dry and store in shady and cool place.  If you want to clean your phone, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean your phone, such as alcohol, dilution agent and benzene. Power-off your phone before you clean it.  Use phone within a temperature range of -10 ℃～ + 55℃ and a humidity Less than 95%. 1.5 Limit Warranty The warranty does not apply to defects or errors in the product caused by: (a) Reasonable abrasion. (b) Misuse including mishandling, physical damage, improper installation, unauthorized disassembly of the product. (c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers. (g) Any other cause beyond the range of normal usage for Products. End User shall have no right to reject, return, or receive a refund for any Product from ZTE under the above-mentioned situations. This warranty is end user’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. 1.6 Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using this product, whether or not ZTE had been
10 advised, knew or should have known the possibility of such damages.
112 Getting Started 2.1 Configuration Parts Quantity Phone set 1 Handset (Receiver) 1 Ni-MH battery 1 External power adapter 1 Antenna 1 Phone Receiver Cord 1 2.2 Technical Specifications Phone set Type WP623 Dimensions (Length×Width×Thickness) 200mm×170mm×77mm Weight About 870g (Battery Included) Battery Continuous standby time Above 72h (Subject to Network)Continuous talk time Above 3h (Subject to Network) Frequency Range： GSM850 869-894MHz PCS1900 1930-1990MHz
12 z External Interface： (1) Antenna connector ANT (2) Data interface DATA (used for programming the phone; not used for GPRS) (3) External power socket (4) Battery switch BATT z Power Supply：100V－240V( AC) 50/60Hz Please refer to the real objects for other relative parameters about the battery and charger.
132.3 Key Instruction Key Description MENU/SELECT key  Enter main Menu, select or confirm options in Menu and left bottom submenu on the display.  In condition of character input, confirm the character chosen. CLR/BACK key  Enter right bottom submenu on the display.  Press CLR key to erase character while editing or dialing. Hold CLR key to erase all the characters.  Press BACK key to cancel operating, exit to previous pop-up window interface. MESSAGE key  Press MESSAGE key to enter Messages menu. EXT PWR Indicator  Lights on when external power supply connected. Up/Down key (Scrolling key)  Up/Down key used as selection key up and down for selecting the commands and items shown on screen display.  Or default functions in standby mode are set in Settings.  Move the cursor when inputting letters. Scroll the cursor in menu option and displayLeft/Right key (Scrolling key)  Left/Right key used as selection key to scroll cursor left and right for selecting the commands and items shown on screen display.  Or default functions in standby mode are set in Settings.  Move the cursor when inputting letters. Scroll the cursor in menu option and display.EXIT key  End an active call or reject calls.
14 Key Description  Power on/power off.  Exit from any window interface to standby mode CALL/REDIAL key  Send telephone number or redial.  In standby mode, press CALL/REDIAL key to enter to view all recent calls list. HANDFREE key  Hand free call. 0~9 Number key  Use the number keys to enter numbers and characters.  Make a direct phone and Speed Dial. # key, * key  Differs in different mode, option or function menu. Note： ◆ Keys in this manual may shape different from actual ones on your phone. ◆ “Press the key” in manual means pressing certain key once, “Hold the key” means pressing key for 2 or 3 seconds. 2.4 LCD Screen Description These icons may appear on screen display of your phone. Signal strength New Message (flop when memory if full) Mute Call Forwarding Bar Blacklist Bar All Friend Only Battery Indicator 2.5 Installation 2.5.1 Receiver Connect phone set and receiver with the receiver cord.
15 2.5.2 Antenna Install antenna to antenna connector ANT. Hold the plastic stick of the antenna and rotate the metal screw cap in clockwise direction to fix it up. Do not rotate antenna directly. 2.5.3 Adapter Connect the lead from the external power adapter to socket at rear back of phone set and connect adapter to an external AC socket. Good ground may guarantee phone’s reliable performance. 2.5.4 Power Supply There are two ways of power supply: 1. External power supply 2. Rechargeable battery supply As usual, suggest make use of external power supply. When power down or unavailable power supply nearby, you can use battery for backup. With external power supply connection and switch BATT to “∣”, phone can automatically detect battery’s current capability and charge the battery accordingly. At that time, external power adapter becomes hot. It is normal. Note: When the battery is in low-voltage, the phone may not work normally: - In state of standby, ZTE WP623 alerts. - During a call, alert may interrupt your call. - ZTE WP623 turns off automatically when in extreme low-voltage. 2.6 Switching Power Switch ZTE WP623 “BATT” at rear back of phone to “∣” to power on battery, and to “O” to power off battery supply. 2.6.1 Power-on In state of power-off, press and hold button key, LCD screen lights with a sound. The phone will check whether SIM card inserted well or not. And then follow the prompt indication on the display: Enter PIN ——Key in PIN code of SIM card if it is set.
16 Enter Lock Code——Key in Phone Lock Code of the phone if it is set. Search——Search appropriate network connected. 2.6.2 Power-off In state of power-on, press and hold button key, LCD screen closes with a sound. Note: When abnormal power blackout causes abnormal phone restart, please disconnect and connect again external power adapter, and then switch on/off ZTE WP623. Please switch BATT at rear back of phone to “O” to power off battery supply, or remove battery if phone won’t be in use for a long time. 2.7 About SIM Card 2.7.1 SIM Card Please insert a valid SIM (Subscriber Identity Module) card into phone set before using. Please do not touch the metal surface of the SIM card, otherwise information in the card may be lost or damaged. Keep the card away from electricity and magnetism. Warning: Please power off phone before removing the SIM card. Inserting or removing the SIM card is forbidden when connects to external power supply. 2.7.2 Usage of SIM Card z Power off phone, disconnect external power supply and open the bottom cover of the SIM card. z Slide the SIM card into the SIM slot. Make sure that the metal connector is facing downwards. And the beveled corner matches with the SIM slot. Close the SIM card holder back to fix the SIM card and press the cover back. Note：If you cannot use phone normally after you insert the SIM card, please check whether the SIM card is inserted correctly or the SIM card is valid (Please consult with the network carrier). Do not power on/off phone continuously for 3 times, otherwise the SIM card may be injured. 2.8 Connecting to Network 2.8.1 PIN Code and Phone Lock Code Setting PIN code (personal identification number) and phone lock code
17are to avoid the illegal usage of SIM card and phone. To Enter PIN code of SIM card and Enter lock code to Unlock the phone, and then press MENU/SELECT key to confirm to start using the phone. If inputting wrong PIN three times continuously, SIM card will be locked by network. Note：The network provider offers you PIN code (four to eight digits). You should change PIN code as soon as possible for security. To set PIN code and Phone lock code, see “6.7 Security Settings”. 2.8.2 Connecting the Network After powering on and inputting PIN code and Phone lock code, the phone automatically searches the network available and in state of standby. Besides making and answering calls, you can do also: ◆ Press MESSAGE key to enter Messages menu. ◆ Press MENU/SELECT key to enter main Menu.  Press CLR/BACK key to enter Names list. Note: If “Emergency Mode” appears on the screen, then you can only send emergency calls. (Fri) Menu Names 8:08 03/31/2006
18 3 Basic Operations 3.1 Making a Call In standby mode, signal strength icon is displayed on upper left corner of screen. And then, you can make or answer calls. 1. Power-on ZTE WP623. 2. To either make or answer a call, you can pick up the receiver or press HANDFREE key, or key in number directly and press CALL/REDIAL key to dial. 3. Make a call or answer a call as steps detailed in the following. Note: When SIGNAL indicator turns off and there is no dial tone while picking up the phone receiver, maybe RF signal is weak or antenna is not screwed on and fixed not well. Change the position of the terminal or check the antenna installation. 3.1.1 Making a Domestic Call Press Number key to key in phone number, and add area code when making a long distance call (no need to add area code when dialing local number in some area). Press CALL/REDIAL key to send a call. Press key to end the call and conversation. 3.1.2 Making an International Call Enter the country code, area code (without the leading “0”) and the complete telephone number you want to dial, press CALL/REDIAL key to call out. Country code + Area code + Telephone number 0086 755 26770000 (Fri) Menu Names 8:08 03/31/2006
193.1.3 Dialing a Number in the List All calls you recently dialed, received or missed are saved in your phone. All numbers are grouped as Missed Calls, Incoming Calls and Outgoing Calls. When the list is full, the oldest numbers will be overwritten automatically when new record is coming. You can check the list as follows:  In standby mode, press CALL/REDIAL key to enter all recent calls.  Or press MENU/SELECT key→ Phone Menus→ Calls to view All Calls, Missed Calls, Received Calls or Dialled Calls.  Press Up/Down key and MENU/SELECT key to select record listed and confirm options.  All the numbers listed can be directly dialed by CALL/REDIAL key. Or press MENU/SELECT key to select Options to Send Message to the number, view the number’s information in Detail, or Save the number in Names, or Add to Blacklist. 3.1.4 Hand-free z Hand-free ZTE WP623 supports hand-free function. Press HANDFREE key to activate. The dial tone make user easy to recognize whether phone is in status of hand-free or not. z Receiver and Hand-free Conversion ZTE WP623 supports hand-free converts to receiver speaking (hand-free speaking is off while receiver is picked up). ZTE WP623 also supports receiver to hand-free speaking (to convert to hand-free speaking while picking up receiver, press HANDFREE key and hook-on receiver afterwards). 3.1.5 Redialing ZTE WP623 supports saving dialed phone numbers. When pick up receiver or press HANDFREE key, press CALL/REDIAL key to display dialed numbers on the screen, use Up/Down key to select one dialed phone number, and then press CALL/REDIAL key to dial this number directly. Note: When abnormal power down causes abnormal phone restart, the
20 last one dialed will not be saved. 3.2 Answering a Call When the phone rings, press CALL/REDIAL key directly, or pick up the receiver, or press HANDFREE key to answer. Usually, originating caller’s number displays in the screen. If the number is listed in the contacts already, the corresponding name will be shown. Hang on receiver to end call. Make sure to exit hand-free mode to guarantee next call to come in. Note: Originating caller’s information display needs network support. Pulling away and inserting power supply adapter is forbidden during conversation. 3.3 Call Information After ending a call, the phone indicates the call duration. Press key or wait for 4 seconds to exit automatically. 3.4 During a Call During a call, you can press MENU/SELECT key to select and confirm Options in the Menu.  Answer: Answer the incoming call.  Busy: Send busy tone to the dialer when you are busy in call.  Volume: Press Up/Down or Left/Right key to adjust the volume of the phone.  Hold/Retrieve/ Swap/ End: Hold the current call; Reactive the call on hold; Swap between two calls; End the current call and answer the incoming call in waiting.  Mute: Mute your local voice for the moment. Note: Some options of submenu only appear under certain circumstances. E.g. Swap appears as while as one call in conversation, another is on hold. 3.5 Menu Functions  Main menu function: 1. In standby mode, press MENU/SELECT key to enter main Menu. Scroll with Up/Down key through the menu and select functions. 2. If the menu contains submenus and further submenus, select options and submenu you want according to the prompt on the screen.
213. Press MENU/SELECT key to confirm or CLR/BACK key to return to the previous menu level. Press key to exit to standby mode.  Bottom menu function: If options are displayed on the bottom of the screen, press MENU/SELECT key and then Up/Down key to select. Press MENU/SELECT key or CLR/BACK key to set or exit. The functions of phone are mainly grouped in the main Menu: Short Messages, Phone Menus, Settings, Toolkit. Please refer to the text hereinafter in this manual in detail.
22 4 Messages This is an introduction to knowing how to send, receive, erase short messages in your phone. Press MENU/SELECT key→ Short Messages, or press MESSAGE key directly to enter Short Messages menu. Short Messages submenu: New Msg, Inbox, Outbox, and Msg Settings. Note：The function introduced hereinafter may differ with different service your area offers. Please consult with your service provider for more detailed information. 4.1 New Message On receipt of a new message, the phone prompts “Received Message” on the screen. Press Read to view. New message is automatically saved in phone. If the memory space is full, the new message cannot be saved. The memory spaces differ with SIM card and phone. Select Inbox to Read the new message. Press any of the Scrolling key (Up/Down or Left/Right key) to enter Inbox in standby mode and Read the message, if set as default key. 4.2 Creating Message Please confirm message center number is already set before writing and sending a message. 1. Select New Msg in Short Messages menu. 2. Input Info context of message or select Idiom to choose text in Templates, select Clear to erase character. See “9.Text Input” to read more instructions for writing text and character. 3. Select Options to Send to One, Send to Many, or to Save the message in Outbox. 4. Key in receiver’s phone number or select in Names list. 5. Select OK to send the message, or select Clear to erase the number. Success information of sending message prompts on the display.
23Note：Short Message center in some cities and areas do not support short message exceeding 198 English characters. 4.3 Inbox Select Inbox and press MENU/SELECT key to Read short message received.  Text Reply: Reply message to sender.  Delete: Erase the message.  Forward: Forward message to other recipients.  Voice Reply: Call the sender directly.  Extract No.: Extract and list all the number(s) in the message. Choose one to Save the number or Send Message to the number. 4.4 Outbox Select Outbox and press MENU/SELECT key to Read short messages stored.  Delete: Erase the message.  Forward: Forward message to other recipients..  Extract No.: Extract and list all the number(s) in the message. Choose one to Save the number or Send Message to the number. 4.5 Preformatted Message ZTE WP623 has a group of some common built-in phrases and sentences, such as, “Please call me immediately”, “Please wait, I am on the way.” etc. 1. Press MENU/SELECT key to enter Menu. 2. Select Short Messages→ Msg Settings→ Templates. 3. Scroll to the message you want to edit. 4. To send message preformatted in Templates, see “4.2 Creating Message” in detail. Note：Hold “*” key directly to view all the preformatted message Templates while writing message, and then edit and send the message. 4.6 Message Settings Before using message functions, please make necessary short message settings. Access Msg Settings submenu:
24  Templates: Some built-in phrases and sentences in phone. Write, edit and send templates, see “4.5 Preformatted Message”.  Msg Centre: Input Message Centre number (contact network service provider to get), press Save to finish setting.  Msg Validity: Set validity period as 1 Hour, 2 Hours, 6 Hours, 1 Day, 2 Days, 1Week, 1 Month or 6 Months within which the message is repeatedly sent by short message center till it is sent successfully.  Status Report: Select “On” to let network send Status Report message to inform your sending message successfully or not.  Used Space: View the number of saved messages and maximum number of messages saved in phone and SIM card (differ with phone and SIM card).
255 Phone Menus Phone Menus includes Calls, Diverts, Firewall, etc. 5.1 Viewing Calls Information of All Calls, Missed Calls, Received Calls and Dialled Calls including the name, phone number, conversation time and Call Duration are saved in Calls. 1. Select Menu→ Phone Menus→ Calls. 2. And then:  Select All Calls to view all calls.  Select Missed Calls to view all calls missed.  Select Received Calls to view all calls received.  Select Dialled Calls to view all calls dialed. 3. Select call number listed in, and press CALL/REDIAL key to directly dial. 4. Or select one entry of the records and press MENU/SELECT key to select Options. - Send Message：Send message to this number. - Detail：Indicate number, caller, conversation time and duration. - Save：Save the number in SIM card; Or save in Phone and group in No Group, Family, Friend, Colleague, Schoolmate, Society, VIP. - Add to Blacklist：Add this number to the Blacklist. If the SIM Card does not support the function of incoming call Indication, you can only see part of the above-mentioned options. 5.2 Calls Duration 1. Select Menu→ Phone Menus→ Calls. 2. Select Call Duration to view call time of Last Call, accumulated time in All Calls Info, or Reset the time duration of last call and all calls to be zero.
26 5.3 Diverting Calls Use Diverts to forward an incoming call to a preset designated phone number. After setting of call forwarding, phone will automatically dial network to set the function in active. Note: This function needs network support. Please consult with network service provider to get corresponding service application.  Setting Calls Divert You can set divert type under different circumstances. 1. Select Menu→ Phone Menus→ Diverts. 2. Set types of divert, press MENU/SELECT key.  Divert Always (Divert unconditionally): Divert in all conditions.  When Busy (Divert when busy): When the phone is busy, divert.  No Reply (Divert when no answer): When there is no answer, divert.  Unreachable: (Divert when unreachable): When the call can not reach the recipient, divert. 3. Select “On” to activate your setting or “Off” to cancel your setting; Select Status Check to see whether Divert is activated; 4. Select one type to forward service selected to preset designated phone number in By Service as follows  All Services: Divert all services, such as, voice call and short message, etc.  Voice Calls: Divert voice call.  Data: Divert data only.  Fax: Divert fax only.  Messages: Divert short message only.  All Except Msgs: Divert all except for short message.  Cancel All Divert 1. Select Menu→ Phone Menus→ Diverts. 2. Set type of divert as Cancel All to cancel all calls’ divert setting, and then press MENU/SELECT key to confirm. 5.4 Calls Firewall You can set Incoming Calls Bar in Firewall submenu including Friend List, Black List, Current Settings.  Friend List All the contacts will be list by the letter of the name. If there is no contact
27in the list, “List Empty” will be displayed. 1. Key in phone number to Add New prefix directly, or select from Names. 2. Select Clear prefix list to delete all contacts in Friend List. 3. Or scroll to one contact listed and select Options:  Add: Add another new contact prefix.  Edit: Edit this contact prefix.  Delete: Delete this contact prefix.  Black List All the contacts will be list by the letter of the name. If there is no contact in the list, “List Empty” will be displayed. 1. Key in phone number to Add New prefix directly, or select from Names. 2. Select Clear prefix list to delete all contacts in Black List. 3. Or scroll to one contact listed and select Options:  Add: Add another new contact prefix.  Edit: Edit this contact prefix.  Delete: Delete this contact prefix.  Current Settings You can set barring applications as follows:  Bar Blacklist: Only bar numbers listed in Black List.  Friend Only: Only numbers listed in Friend List are not blocked.  Bar All: Bar all incoming calls.  Cancel All: Cancel barring setting.
28 6 Settings Press and select MENU/SELCET key→ Settings to enter Settings menu. The phone has different functions in Settings to meet your requirement. They are: Phone Settings, Display Settings, Audio, Clock Settings, Call Settings, Network Settings, Security Settings, and Factory Settings. 6.1 Phone Settings 6.1.1 Language Set the displayed language as English available. 6.1.2 Own Number Save, edit and list the number information of your phone. 1. Select Menu→Settings→Phone Settings→Own Number. 2. Press MENU/SELECT key to Select:  Edit Number: Edit number information of your own phone.  Add Number: Add and save another number’s information of your own phone.  Delete Number: Delete number information of your own phone. 3. View your own phone number in list. 6.1.3 Fastkey Settings 1. Select Menu→Settings→Phone Settings→ Fastkey Settings. 2. Set Up/Down, Left/Right key as the default Fastkey of empty, Missed Calls, Received Calls, Dialled Calls, New Msg or Inbox as what you like. 6.2 Display Settings 1. Select Menu→Settings→Display Settings. 2. Select “On” to active Backlight or turn “OFF” backlighting.
296.3 Audio Settings 1. Select Menu→Settings→Audio. 2. You can adjust the tone and volume in submenu in the following, and press MENU/SELECT key to confirm.  Volume：Press Up/Down key or Left/Right key to adjust the volume.  Ringing Volume: Set the volume of the ring tone.  Speaker Volume: Set the volume of the speaker.  Handfree Volume: Set the volume of hand-free.  Tone or Alert:  Ringing Tone: Select type of ring tone.  Key Tone: Select “On” or “Off” to utter sound or not when press keys.  Warn Tone: Set the phone alert “On” or “Off”.  Missed Alert: Select “On” or “Off” to prompt alert or not when there is call missed.  Message Alert: Select type of tone to prompt when there is message.  Power on/off Ring: Select “On” or “Off” to ring or not when power on/off the phone. 6.4 Clock Settings  Date & Time: Press Up/Down key or Left/Right key to move between year/month/date and time to set date with a term from Jan. 1st, 2005 to Dec. 31st, 2055, and time from 00:00 to 23:59. And then press Menu/Select key to confirm.  Date Format: Select date format as Y:M:D, D:M:Y, M:D:Y. 6.5 Call Settings 6.5.1 Minute Minder If there is an incoming call in conversation, set the phone to remind 5 Seconds or 15 Seconds before every minute or “Off” reminding. 6.5.2 Call Waiting During a call, use Call Waiting to answer the waiting call, meanwhile putting the first call on hold. These calls can be shifted while you have calls in conversation.
30 Note: This function needs network support. Please consult with network service provider to get corresponding service application.  On：Register and activate Call Waiting function.  Off：Cancel Call Waiting function.  Status：Check whether Call Waiting is activated or not. Select “On” to activate the Call waiting function. The network will notify you of an incoming call while you have a call in progress. You can press CALL/REDIAL key to get through the waiting call and select option to swap one call to another. 6.6 Network Settings 1. Select Menu→Settings→Network Settings. 2. Select option to search for the network.  Automatic: The phone searches for the network automatically.  Manual: Search for the network in manual way. 6.7 Security Settings Introduction to phone’s security options preventing others to avoid illegal use or acquire your phone’s personal information. Note: Please input right Phone Lock Code to enter Security Settings. The default code is “1234”. Please change it to your own password as soon as possible.  SIM Password: PIN code of SIM card prevents others to avoid illegal use or acquire your SIM card. Select “On” or “Off” to activate PIN code or not. Select “Change PIN” to change PIN code. Note: Three consecutive inputting wrong PIN code can cause lock of SIM card. To unblock, you need PUK. PIN code and PUK code may be offered together with the SIM card. If not, please contact with network operator. Please change it to your own password as soon as possible.  Phone Lock: Select “On” or “Off” to activate phone lock or not. Or enter new Phone Lock Code set by your own to Change Code.  Network Call Bar: Set any of call bar(s) in the following to promote security, please contact to the service provider for details. The service provider will offer you a 4-digit Network Code to activate Network Call Bar. 1. Select Menu→Settings→Security Settings→Network Call
31Bar. 2. Set types of bar, press MENU/SELECT key.  International Calls: Bar international call(s).  All Except Home: Bar all calls except for home number.  Incoming Calls: Bar incoming call(s).  Incoming If Abroad: Bar incoming call(s) overseas.  Outgoing Calls: Bar sending call(s).  Cancel All: Cancel barring call(s) setting. 3. Select any of above mentioned bars (except for Cancel All), and then scroll to set barring options: - All Services: Bar all services, such as incoming call, voice call, and message, etc. - Voice Calls: Bar voice call only. - Data: Bar data only. - Fax: Bar fax only. - Messages: Bar message only. - All except Msgs: Bar all services except for message. 4. After setting bar and service type, you can do as follows:  On：Activate bar after registration.  Off: Cancel setting of bar.  Status: Check whether bar is activated or not.  Cancel All: Cancel barring call(s) setting. Note: Set or cancel network call bar acquires network code offered by the service provider. Three consecutive inputting wrong codes can cause locking of barring service. To unlock, please contact with network provider. 6.8 Factory Settings Your phone offers factory default phone setting. You may modify some options when you use phone. You can also Phone Reset some modified options to the origin.
32 7 Toolkit Select MENU→Toolkit to enter Toolkit menu. The phone offers Alarm Clock in Toolkit. 7.1 Set Alarm Set Alarm Clock at a certain time. 7.1.1 Normal Alarm Set alarm alert at a normal time. The phone clock only alarms once. 1. Select Menu→Toolkit →Set Alarm →Normal Alarm. 2. Press Left/Right key and Up/Down key to select Date and Time, and then press Number key to key in number. 3. Press MENU/SELECT key to confirm Date and Time, and then select the Alert Tone in list. 7.1.2 Daily Alarm Set alarm alert at a fixed time. The phone clock alarms at this time everyday. 1. Select Menu→Toolkit →Set Alarm →Daily Alarm. 2. Press Left/Right key to select the Time, and then press Number key to key in number. 3. Press MENU/SELECT key to confirm the Time, and then select the Alert Tone in list. 7.2 Show Alarm If Alarm Clock is already set, only Show Alarm is shown on the screen. 1. Select Menu→Toolkit →Show Alarm. 2. The alarm information is shown on the screen. 3. Select Options to Edit, Disable or Delete the Alarm Clock settings.
338 Contacts in Names Press CLR/BACK key in standby mode or any submenu to enter Names. You can save, search, view and edit contacts information in Names. If there is no contact in the list, “List empty” will be displayed. All the contacts will be list by the letter of the name. 8.1 About Names All the contacts in Names are grouped in No Group, Family, Friend, Colleague, Schoolmate, Society, and VIP. 1. Press CLR/BACK key →Names. 2. Press * key to view contact and all Group list one by one. If there is no contact in the list, “List empty” will be displayed. 3. Scroll Up/Down key to view contact and select one. Press CALL/REDIAL key to call out. 4. Press MENU/SELECT key to select Options:  Search: Search other contact.  Edit: Edit this contact.  Delete: Erase this contact.  Add New Name: Add a new contact.  Settings: Set contact in Names.  Batch Operation: Copy, move, or delete contact in phone’s memory or SIM card. 8.2 Adding New Name 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select names’ group, to Add New Name in the preset place by Settings:  SIM Card: Add contact in SIM card as default.  Phone: Add contact in Phone’s memory as default. If save contact in SIM card, it needs:  Input Number of new contact.  Input Name of new contact. If save contact in Phone’s memory, it needs:  Input Number and Name of new contact.  Input Group of new contact. 3. Press MENU/SELECT key to confirm or CLR/BACK key to cancel.
34 8.3 Viewing all Names Information of all contacts including the name, phone number, group are displayed. 1. Press CLR/BACK key →Names. 2. Scroll Up/Down key to view contact and select one. Press CALL/REDIAL key to call out. 3. Or select one entry of the records and press Right key to view the information of the contact including the name, phone number, group. And then press Left/Right key to view different contact. 4. And press MENU/SELECT key to select Options.  Send Message：Send message to this number..  Edit: Edit this contact  Delete: Erase this contact.  Add to Speed: Set available speed dial digit number (0-9) for the phone number selected.  Copy to SIM: Copy this contact to SIM card., when saved in phone.  Move to SIM: Move this contact into SIM card, when saved in phone.  Copy to MS: Copy this contact to phone’s memory, when saved in SIM card.  Move to MS: Move this contact into phone’s memory, when saved in SIM card.  Add to Blacklist：Add this number to the Blacklist.  Add to Friendlist：Add this number to the Friendlist. 8.4 Searching Names  In Names 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select Search in Options. 3. Input part or full letter of contact’s name. Press MENU/SELECT key to Search, press # key to switch Text Input.  Searching Input Mode Input Mode while searching includes Eng, ABC, abc, 123. Press # key to change input mode.  Quick Searching IN Names list, press directly digit key to find contact contain or near the letters on the digit key.
358.5 Editing Names 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select Edit in Options. 3. Edit information of the contact selected including Number, Name, Group, etc. Press MENU/SELECT key to confirm, press # key to switch Text Input. 8.6 Deleting Names 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select Delete in Options. 3. Delete information of the contact selected. Press MENU/SELECT key to confirm. 8.7 Setting Names 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select Settings in Options. 3. Set contact group and tone:  Ringing Tone: Set Ringing Tone for different group of No Group, Family, Friend, Colleague, Schoolmate, Society or VIP.  Save No. to: Save the number in SIM Card, Choice or Phone memory.  Used Space: View the space used and maximum memory space in phone and SIM card (differ with phone and SIM card).  Speed Dial List: Check the number information of speed dial list. In standby status, hold directly digit (0-9) to call speed-dial number preset already. 8.8 Batch Operation 1. Press CLR/BACK key →Names. 2. Press MENU/SELECT key to select Batch Operation in Options. 3. Set contact group and tone:  Copy SIM to mem.: Copy all the contact information in SIM card to Phone’s memory.  Copy mem. to SIM: Copy all the contact information in Phone’s memory to SIM card.  Move mem. to SIM: Move all the contact information in Phone’s memory to SIM card.
36  Move SIM to mem.: Move all the contact information in SIM card to Phone’s memory.  Delete All In SIM: Delete all of records in SIM card.  Delete All In Phone: Delete all of records in Phone’s memory.
379 Text Input Your phone offers text input modes: Multitap Input (ABC/abc), Numbers Input (123), eZiText Input (Eng), and Symbol Input (Symbols). Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols when writing text or editing contact record information in Names or Messages etc., following the common instruction in hereinafter table. Operation Method Input Letters Multitap Input—“ABC” or “abc”, press corresponding letter key till the letter appears. Input Words eZiText Input—“Eng”, press any key once to key in any word. Input Digits Numbers Input—“123”, press digit key once. Input Symbol Symbols Input —press * key and press Left/Right key and Up/Down key to select corresponding symbol. ABC/abc Input — press “1” key till the symbol (common symbols) appears. Input Space Press “0”key, except for being in numbers mode. Erase Character Press CLR/BACK key. Erase all the characters Hold CLR/BACK key till all the characters to be erased. Move cursor left or right Press Left/Right key. Change input mode Press # key to change text input mode. Capitalization Press # key to “ABC” and “abc” input mode to switch between capitalization and lowercase.
38 9.1 Multitap Input Select Multitap Input (ABC/abc) — Each key stands for multiple letters. Press key till your letter appears. When the cursor moves, enter the next letter. “ABC” and “abc” stand for letters in capitalization and lowercase. 9.2 Numbers Input Select Numbers Input (123) — Press the corresponding key once to input the number. In Numbers input mode, you can not enter space. 9.3 eZiText Input Select eZiText Input (Eng) — Predictive word input is based on a built-in dictionary. One letter asks for pressing only once. Press the digit key corresponding to the letters once till the word appears on the screen. If the word displayed is not the word you want, press Left/Right key and Up/Down key to look for another matching word. Then press MENU/SELECT key to confirm. 9.4 Symbols Input - Press “1” key to input till the symbol appears. Most common punctuation marks and special characters are available. Or press * key to select symbols: - Press Left/Right key and Up/Down key to select to enter corresponding symbol.
3910 Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point When switching on the phone, it prompts “Enter PIN”. Please input your PIN Code which offered with SIM card together. If you have changed PIN code, please input new PIN Code. You can also set PIN code deactivated, see “6.7 Security Settings”. When switching on the phone, it prompts “Insert SIM card”. Please check whether valid SIM card is inserted or not. When switching on the phone, it prompts “Emergency Only”. “Enter lock code” you set already to Unlock the phone, see “6.7 Security Settings”. No ring tone prompt for a incoming call. Check volume setting of ring tone, see “6.3 Audio Settings”. No display on screen when disconnect external power supply. Check whether the battery switch is turn to “|”, whether the battery has electricity, or it is damaged; or power on the phone again. Press CALL/REDIAL key, but no number is sent. Check whether you have set Network Call Bar, see “6.7 Security Settings”. Certain call cannot be received. Check whether the number is restricted to come, see “5.4 Calls Firewall”. Cannot send short Please check the network condition,
40 Problem Check Point message. or message centre setting, see “4.6 Message Settings”. Other abnormal phenomenon. Please first refer to user manual, then check whether the power is connected correctly or not, if there are no problems, please power off and re-start the phone again.

Navigation menu