ZTE ZTEA52019 LTE/WCDMA/GSM(GPRS) Mutil-Mode Digital Mobile Phone User Manual user manual

ZTE Corporation LTE/WCDMA/GSM(GPRS) Mutil-Mode Digital Mobile Phone user manual

Contents

user_manual

 1           ZTE Blade A5 2019 Quick Start Guide
 2 LEGAL INFORMATION Copyright © 2019 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevices.com) for more information on self-service and supported product models. Information on the website takes precedence. Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Android™ is a trademark of Google LLC.   The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license.       microSDXC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners.   Version No.: R1.0 Edition Time : December 3, 2018 Manual No.:
 3 Getting to Know Your Phone                               * Supports CTIA headsets only. Front camera Touch screenEarpieceProximity & light sensor Volume key Power key FlashCharging/ micro-USBjackHeadset jack*Back camera SpeakerIndicator light Back cover
 4 Setting Up Your Phone The nano-SIM card can be installed or removed while the phone is turned on. Power off your phone before removing or replacing the battery. WARNING! To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider. 1.  Insert your fingernail into the slot at the bottom left of the back cover and lift it up gently.  2.  Insert the nano-SIM card into the right card slot, and insert the microSDXC card (optional) into the left card slot.
 5 3.  Insert the battery, making sure the connectors align.  4.  Replace the back cover. Charging the Phone Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible. WARNING! Use only ZTE-approved chargers and USB cables. The use of unapproved accessories could damage your phone or cause the battery to explode.   NOTE: If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging.
 6 Product Safety Information  Don’t make or receive phone calls while driving. Never text while driving.  Keep your phone at least 10 mm away from your body while making calls.   Small parts may cause choking.  Your phone can produce a loud sound.  To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use.  Avoid contact with anything magnetic.  Keep away from pacemakers and other electronic medical devices.  Turn off when asked to in hospitals and medical facilities.  Turn off when told to on aircraft and at airports.  Turn off when near explosive materials or liquids.  Don’t use at gas stations.  Your phone may produce a bright or flashing light. Don’t dispose of your phone in fire.  Avoid extreme temperatures.  Avoid contact with liquids. Keep your phone dry.  Do not attempt to disassemble your phone.  Only use approved accessories.
 7  For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.  Don’t rely on your phone as a primary device for emergency communications.   FCC RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. This device is complied with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
 8 SRQ-ZTEA52019 For this device, the highest reported SAR value for usage against the head is 0.443W/kg, and for usage near the body is 0.585W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided.  FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
 9 installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  CAUTION:  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu