ZHUHAI EUCCOI DIGITAL TECHNOLOGY A56-220 Scanner User Manual Manual BT 2 4G 15 5X9 5 12p V6 0

ZHUHAI EUCCOI DIGITAL TECHNOLOGY CO.,LTD. Scanner Manual BT 2 4G 15 5X9 5 12p V6 0

User Manual

Bluetooth&2.4G 1 Bluetooth&2.4G Scanner Manual Guide Low-power technology Full ASCII character editing Support Function key & Composite key 25 Language supportedV6.0
Bluetooth&2.4G 2Specification TYPE Distance Memory=2M Bluetooth ≤50m 7680 (characters/barcode≤128) 2.4G ≤100m Working current：3.5Vx40mA Standby current ：18uA-5mA Working time ：3 to 10 days Charging power：5V-400mA Scanner parameters： Scanning type ：bi-directional Light source：650±20nm VLD Scanning width ：30cm BER ：1/5millon、1/20million Printing Contract ：>25% Indication：Buzzer & LED Trigger Mode：Button，Continuous，Auto-Induction Depth of Field3.3mil 2mm-100mm CPU：ARM 32-bit Cortex Resolution ：3.3mil Decoding speed：200/sec 10mil 2mm-350mm 15mil 5mm-500mm 30mil 10mm-800mm Scanning angle：Angle of rotation±30°，inclination± 45°，declination ± 60°Anti-interference：No influence working under strong light and sunshineDecode Capability：UPC/EAN、Code128、Code39、Code 39Full ASCII、Coda bar、industrial /Interleaved 2 of 5 Code93、MSI、Code11、ISBN、ISSN、China post、etc. Button life ：500,000 times laser life：10000 hours Drop test ：1.5m Interface：USB，USB-COM Certificate ：CE，FCC，RoHS，Class I
Bluetooth&2.4G 3Switch instructions Bluetooth/2.4G ◆The first boot, the scanner works in Bluetooth mode。 ◆Scan “Restore defaults” settings barcode, the scanner will be set to Bluetooth-mode。 Press the button, the buzzer rang “Di-di-di”, The red light flashing and the blue light is on which means in matching mode. ■Switch operation 1，Scan the settings barcode Bluetooth-mode 2.4G-mode2，Press and hold the button for 10seconds ■Switch process description ►In Bluetooth mode，Press and hold the button for 10seconds，the buzzer rang “ Di-da-di”, “DI-di-di”. Means that the switching operation is complete，Release the button， The green light is on which means the scanner successfully switches to 2.4G-mode. ►In 2.4G mode，Press and hold the button for 10seconds，the buzzer rang “ Di-da-di”, “DI-di-di”. Means that the switching operation is complete，Release the button， The blue light is on which means the scanner successfully switches to Bluetooth-mode. ■Status lights Bluetooth status lights=blue 2.4G status lights=green
Bluetooth&2.4G 4General Settings Scan barcode to setup scanner Restore defaults(restore factory settings) ■How to use the scanner (2.4G)? 1, Press the button, the buzzer rang “Di-di-di” , the status light is on, the scanner starts. 2, Plug the receiver to your computer, the blue light is on, the receiver starts to work. 3, Please match the receiver and the scanner within 30 seconds! 4, Open a text, put the cursor in, Scan any barcode to see if the barcode can be uploaded. Match(match the scanner and the receiver) ■Matching Operation Plug the receiver to your computer，when it start to work ,Match the scanner and the receiver by scan the “Match” Barcode. (1) Matching successfully, the buzzer rang “ Di-da-di”, “DI-di-di”. (2) Matching failed, the buzzer rang “ Di---en”. ■Network Mode ：One to one ，More to one ►One to one —one scanner to one receiver 1, plug the receiver to your computer 2, scan the “Match” bar code to Match the receiver ►More to one —several scanner to one receiver If you have 2 scanners: scanner A, scanner B, 1, Plug the receiver to your computer 2, Match for the scanner A: A scan the “Match” Barcode. 3，Unplug the receiver and Plug the receiver again. 4, Match for the scanner B: B scan the “Match” Barcode. After that ,2 scanners can transmit the data to the receiver.
Bluetooth&2.4G 5Working Mode ■Two upload mode：Instant upload mode、storage mode. ►Instant upload Mode：Instant upload data to your computer Instant upload Mode (1) Upload successfully: The status light flashed and the buzzer rang “ Di ”. (2) Upload failed: The red light flashed and the buzzer rang “ Di---en”. ►Storage Mode ：Scan and store barcode inside the scanner, and uploaded the data to your computer when you need it. Storage Mode Show total storage (Show total number of memory) Upload Data (Upload Data to your computer) High upload speed -default Low upload speed Zero clearing (clear all data in scanner) 1，Save successfully：The status light flashed and the buzzer rang “ Di-en ” 2，Save failed：The red light flashed and the buzzer range “ Di---en”， This indicates that there was not enough memory to save the bar code. Please upload the saved bar code by scanning “Upload Date” and then clear the Memory by scanning “Zero cleaning”. 3, Upload completed: the buzzer rang “ Di-do-en ”.
Bluetooth&2.4G 6Power and Standby Setup Battery Reserve（show battery level） Set the time for automatic shutdown 50 seconds shutdown 2 minutes shutdown-Default 5 minutes shutdown 30 minutes shutdownBattery level indication 1. The scanner starts, when the buzzer rang “Di-di-di” and the status light is on with no red light flashing, it indicates that the battery is sufficient 2. The scanner starts, when the buzzer rang “Di-di-di” and the status light is on with the red light flashes three times, it indicates that the battery less than 30%, please charge the scanner as soon as possible 3. The scanner starts, when the buzzer doesn’t make a sound and the status light is off with the red light flashes three times. It indicates that the battery less than 20%. The scanner enters the low battery protection mode. Please charge the scanner at least for 30 minutes before using 4. Press the button, the scanner does not respond. Please charge the scanner at least for 30 minutes. If the scanner still cannot start, this indicates that the battery is broken and needs to be replaced. LED tips during charging Plugged the USB cable into the USB port of computer 1. Charging mode: the status light is on with the red light flashing 2. Charging completed: the status light is on and the red light goes out 3. Micro-current charging: the status light off and the red light flashing (Note: This is battery protection phase, please do not use it in this condition)
Bluetooth&2.4G 7End Mark CR CR+LFTab None Interface setup（only 2.4G） USB_HID USB virtual COMBuzzer Setup Volume Off Low volume Medium volume High volume -DefaultTrigger Mode Keys Trigger Continuous ModeDuplicate barcode upload Setup Duplicate detection-ON (Unable to upload duplicate barcode)Duplicate detection-OFF -Default(upload duplicate barcode)
Bluetooth&2.4G 8Language UNITED STATES BELGIUM BRAZIL DENMARK FRANCE GERMANY HUNGARY ITALY LATIN AMERICA NETHERLANDS NORWAY PORTUGAL SPAIN SWEDEN UNITED KINGDOM UNIVERSALNote：Support 25 languages .
Bluetooth&2.4G 9Bluetooth- Setup Guide Bluetooth Mode HID-mode-Default SPP-mode=virtual COMHID-speed HID fast- Default HID slowIf the data is lost，Please set the slow speed Show/Hide IOS keyboard or double-click the button Offconnection Connect to just Host Clear all matching records ShutdownMatch instructions Match Scan“Math”barcode,thescannerentersthepairingmodeTheScannername：“Scannerxxx”.Pleasedistinguishbetweenthe2.4GreceiverandtheBluetoothreceiver.
Bluetooth&2.4G 10ForAndroid、IOS1, Press the button, the buzzer rang “Di-di-di”, The red light flashing and the blue light is on which means in matching mode. 2, Choose the scanner is going to pair with the host ，When the connection is successful, the red light goes out and the blue light is on , the buzzer rang “DI-di”. ForWindowsXP1, Insert the Bluetooth receiver, the computer will automatically install the drive. 2, Press the button, the buzzer rang “Di-di-di”, The red light flashing and the blue light is on which means in matching mode. 3, Open the Control Panel, click “Bluetooth device"→ click the Add button, Then, Select “My device is set up and ready, you can find", click Next, The computer will search “Scanner xxx” 4,Double-click the device, The dialog box appears, choose not to use keys, click“ Next”, the computer will install the driver ，When the connection is successful, the red light goes out and the blue light is on , the buzzer rang “DI-di”. ForWindows71, Insert the Bluetooth receiver, the computer will automatically install the drive. 2, Press the button, the buzzer rang “Di-di-di”, The red light flashing and the blue light is on which means in matching mode. 4, Open the Control Panel, click on the “Add a device", the computer will search “Scanner xxx” 5, Double-click the device, the computer will automatically install the driver ，When the connection is successful, the red light goes out and the blue light is on , the buzzer rang “DI-di”. ForWindows8/101, Insert the Bluetooth receiver, the computer will automatically install the drive. 2, Press the button, the buzzer rang “Di-di-di”, The red light flashing and the blue light is on which means in matching mode. 4, Open the Control Panel, click on the “Add a device", the computer will search “Scanner xxx”. 5, click the device and click “Next”, the computer will install the driver, When the connection is successful, the red light goes out and the blue light is on , the buzzer rang “DI-di”.
Bluetooth&2.4G 11Frequently ask question Question: Press the key, the red laser appear and then goes out, but there is no bar code display in the input box? Answer: 1. The USB receiver has not plugged into the computer USB port, please make sure that the USB receiver has been fully plugged into the USB port. 2. The USB port of the computer is out of condition, please plugged the USB receiver into the USB port of another computer to test 3. The USB receiver is not matched with scanner yet, or the scanner is set to “storage mode” or “USB Virtual COM”, please unplugged the USB receiver and plugged it again, then scan the following barcode in turn, “Restore defaults”, “Match”, “Instant upload mode”, “USB_HID”, 4. The cursor is not in the input text box, please make sure the cursor is in the input box where you want to upload the barcode. 5. If the USB receiver indicator goes out or flasher, it indicates that the receiver is broken. Question: Press the button, the scanner is not laser? Answer: 1. The battery less than 20%. The scanner enters the low battery protection mode. Please charge the scanner at least for 30 minutes before using. 2. The laser engine is damaged and needs to be replaced. Question: Read the barcode, the barcode data will be lost? Answer: Slow down the HID speed of the scanner. Question: Barcode characters is wrong? Answer: 1.Set the scanner keyboard nations with using the keyboard. 2.Set more slow HID speed（in Mac）
Bluetooth&2.4G 12FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Bluetooth&2.4G 13NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. All Rights Reserved

Navigation menu