Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM
Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM
Contents
- 1. User Manual
- 2. User Manual 1
- 3. User Manual 2
- 4. User Manual 3
- 5. User Manual 4
- 6. User Manual 5
- 7. User Manual 6
- 8. User Manual 7
- 9. User Manual 8
- 10. User Manual 9
- 11. User Manual 10
- 12. User Manual 11
- 13. User Manual 12
- 14. User Manual 13
- 15. User Manual 14
- 16. User Manual 15
- 17. User Manual 16
- 18. User Manual 17
- 19. User Manual 18
- 20. User Manual 19
- 21. User Manual 20
- 22. User Manual 21
User Manual 16
![164Customize Menu Settings and User PreferencesSet-upMenuListMenu/Item ExplanationoffunctionAvailablesettings (DefaultvaluesshowninBOLD)DISPLAY1DISPLAYSELECT Screen display settings when is pressed brieflyALTITUDE: ON / OFFTIMER/CLOCK: ON / OFFGPS INFO: ON / OFF2TARGETLOCATION Switch between the compass screen and the latitude and longitude display screen when using the GPS and GM functionsCOMPASS / NUMERIC3BACKGROUNDCOLORSet the display background colorORANGE / GREEN / BLUE / PURPLE / GRAY4 BANDSCOPE Scope Display width settingNARROW / WIDE5LCDBRIGHTNESS Touch panel brightness MIN / 2 / 3 / 4 / 5 / 6 / MAX6LCDCONTRAST Touch panel contrast -3 / -2 / -1 / 0 / +1 / +2 / +37TIME/VDD Time / Voltage Display settingTIME / VDDTX/RXMODE Setting the signal format in the analog modeAUTO(FM) / FM / NARROW FM / AMDIGITAL1AMSTXMODE Set the AMS transmission modeTXM / TX FM FIXED / TX DN FIXED /TX VW FIXED / AUTO2SQLTYPE Digital mode Squelch type settingOFF / CODE / BREAK3SQLCODE Squelch code setting in the digital modeCODE: 001 to 1264 DIGITALPOPUPTIME Information screen pop-up timeOFF / 2 sec / 4 sec / 6 sec / 8 sec / 10 sec / 20 sec / 30 sec / 60 sec / CONTINUE5LOCATIONSERVICE Own (MY) position display setting in the digital modeON / OFFRefer to the separate Operating Manual GM Edition for details on the functions.6STANDBYBEEP Standby Beep setting ON / OFF7DSPVERSION DSP version display Ver. 2.** (cannot be edited; differs depending on the time of release)AUDIO1SUBBANDMUTE Sub-band mute setting OFF / ON 2MICGAIN Microphone sensitivity settingMIN / LOW / NORMAL / HIGH / MAXMEMORY1ALPHATAGSIZE Display size setting of memory channel tagSMALL / LARGE2MEMSCANTYPE Scanning method setting during memory scanALLMEM / SELECT MEMSIGNALING1TONESQLFREQ Tone frequency (CTCSS)67.0Hz - 254.1 Hz 88.5Hz2DCSCODE DCS code setting 023 - 7543AUTODIALER DTMF code automatic transmission settingOFF / ON4 DTMFMEMORY DTMF code registration 1 - 9 ways 16 characters eachApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-1.png)
![165Customize Menu Settings and User PreferencesSet-upMenuListMenu/Item ExplanationoffunctionAvailablesettings (DefaultvaluesshowninBOLD)SIGNALING5PAGERCODE Pager individual code settingRX CODE : 01 - 50 05RX CODE 2: 01 - 50 47 TX CODE 1: 01 - 50 05TX CODE 2: 01 - 50 476PRGREVTONE User programmed reverse tone frequency300 Hz - 3000 Hz 1500Hz7BELLRINGER Recall sound length settingOFF / 1 time / 3 times / 5 times / 8 times / CONTINUOUS8SQLEXPANSION Separate squelch type setting for transmit and receiveOFF / ON9WXALERT(USA Version Only)Weather alert operation settingOFF / ONSCAN1DUALWATCHSTOP Setting the signal reception methodAUTO / HOLD2SCANDIRECTION Scanning direction settingUP / DOWN3SCANRESUMESet the resume operation after scan stopBUSY / HOLD / 1 sec / 3 sec / 5 secGM1RANGERINGER Bell sound setting when checking for stations within sphere of communicationsOFF / ON2RADIOID Specific ID display by transceiver- (cannot be edited)* Refer to the separate Operating Manual GM Edition for details on the functions.WIRESX1RPT/WIRESFREQ PRESETFREQUENCYSetting of operating frequency in repeater / WIRES-X Registration of the preset frequencyMANUAL / PRESET 144.000 - 146.000 144.6202SEARCHSETUP Setting the WIRES ROOM selection methodHISTORY / ACTIVITY3EDITCATEGORYTAG Editing the category tag C1 - C54 REMOVEROOM/NODE Deletion of the registered categoriesC1 - C5* Refer to the separate Operating Manual WIRES-X Edition for details on the functions.CONFIG1DATE&TIMEADJUSTSetting the date and time-2DATE&TIMEFORMAT Setting the date and time display formatsDATE: mmm/dd/yyyy / yyyy/mmm/dd / dd/mmm/yyyy / yyyy/dd/mmmTIME: 24hour / 12 hour3TIMEZONE Time zone setting UTC±14: 00 (0.5 h interval) UTC+0:004 AUTORPTSHIFTAuto repeater shift settingOFF / ON5RPTSHIFT Repeater shift direction settingOFF / − / +(Differs depending on frequency)Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-2.png)
![166Customize Menu Settings and User PreferencesSet-upMenuListMenu/Item ExplanationoffunctionAvailablesettings (DefaultvaluesshowninBOLD)CONFIG6RPTSHIFTFREQ Repeater TX offset setting0.00 - 99.95 MHz(Differs depending on frequency)7FMAMSTEP Channel step setting AUTO / 5.00 KHz / 6.25 KHz / 10.00 KHz / 12.50 KHz / 15.00 KHz / 20.00 KHz / 25.00 KHz / 50.00 KHz / 100.00 KHz8BEEP Beep setting OFF / LOW / HIGH9CLOCKTYPE Clock shift setting A / B 10 MICPROGRAMKEY Microphone P buttons settingOFF (disable the P button) / BAND SCOPE / SCAN / HOME / DCS CODE / TONE FREQ / RPT SHIFT / REVERSE / TX POWER / SQL OFF / T-CALL / VOICE / D_X / WX / S-LIST / MSG / REPLY / M-EDITP1: SQLOFF (T-CALL: European version)P2: HOMEP3: D_XP4: TXPOWER11 RXCOVERAGE Reception range expansion settingNORMAL / WIDE 12 UNIT Display unit setting METRIC / INCH(Depends on the transceiver version)13 APO Automatic power OFF operating timeOFF / 0.5 hour - 12.0 hour14 TOT TX time out setting OFF / 1 min - 5 min - 30 min15 BluetoothPAIRING PIN code setting and pairing start0000 - 9999 611116 GPSDATUM GPS function positioning selectionWGS-84 / TOKYO MEAN17 GPSDEVICE GPS receiver selection INTERNAL / EXTERNAL18 GPSLOG GPS access time setting OFF / 1 sec - 60 secDATA1COMPORTSETTING COM port setting SPEED: 4800 bps / 9600 bps / 19200 bps / 38400 bps / 57600 bpsOUTPUT: OFF(camera) / GPS OUT / PACKET / WAYPOINTWP FORMAT: NMEA 6 / NMEA 7 / NMEA 8 / NMEA9 WP FILTER: ALL / MOBILE / FREQUENCY / OBJECT/ITEM / DIGIPEATER / VoIP / WEATHER / YAESU / CALL RINGER / RNG RINGER2DATABANDSELECT APRS/DATA band selection settingAPRS: MAIN BAND / SUB BAND / A-BAND FIX / B-BANDFIX / A=TX/B=RX / A=RX/B=TXDATA: MAIN BAND / SUB BAND / A-BAND FIX / B-BANDFIX / A=TX/B=RX / A=RX/B=TX3DATASPEED APRS/DATA communication baud rate settingAPRS: 1200 bps / 9600 bps DATA: 1200 bps / 9600 bpsApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-3.png)
![167Customize Menu Settings and User PreferencesSet-upMenuListMenu/Item ExplanationoffunctionAvailablesettings (DefaultvaluesshowninBOLD)DATA4 DATASQUELCH Squelch detection settingAPRS: RXBAND / TX/RX BANDDATA: RXBAND / TX/RX BANDTX: ON / OFFAPRS1APRSCOMPASS APRS compass display orientationNORTH UP / HEADINGUP2APRSDESTINATION Model code display Non-editableAPY4003APRSFILTER Filter function setting Mic-E: ON / OFFPOSITION: ON / OFFWEATHER: ON / OFFOBJECT: ON / OFFITEM: ON / OFFSTATUS: ON / OFFOTHER: ON / OFFRANGE LIMIT: 1 mi - 3000 mi / OFFALT.NET: ON / OFF4 APRSMESSAGETEXT Standard message text input1 to 8 ch5APRSMODEM APRS function ON/OFF settingOFF / ON6APRSMUTE Band B AF mute setting for APRSOFF / ON7APRSPOP-UP Display time setting for pop-up display of beacons and messagesBEACON: OFF / 3 sec / 5 sec / 10 sec / HOLDMESSAGE: OFF / 3 sec / 5 sec / 10 sec / HOLDMYPACKET: OFF / ON8APRSPOP-UPCOLOR Screen color setting for pop-up display of beaconsCHECK OFF / GREEN / BLUE / ORANGE / PURPLE / SKY-BLUE / YELLOW / AMBER / WHITE1 BEACON: CHECKOFF2 MOBILE: CHECKOFF3 OBJECT/ITEM: CHECKOFF4 CAL RINGER: CHECKOFF5 RNG RINGER: CHECKOFF6 MESSAGE: CHECKOFF7 GRP/BULT: CHECKOFF8 MY PACKET: CHECKOFF9APRSRINGER Bell sound setting at beacon arrivalTX BEACON: ON / OFF TX MESSAGE: ON / OFF RX BEACON: ON / OFF RX MESSAGE: ON / OFF MY PACKET: ON / OFF CALL RINGER: ON / OFF RNG RINGER: 1km - 100km / OFFMSG VOICE: ON / OFF10 APRSRINGER(CALL) Call sign setting for CALL RINGER1 - 8 stationsApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-4.png)
![168Customize Menu Settings and User PreferencesSet-upMenuListMenu/Item ExplanationoffunctionAvailablesettings (DefaultvaluesshowninBOLD)APRS11 APRSTXDELAY Data transmit delay time setting100 ms / 150 ms / 200 ms / 250 ms / 300 ms / 400 ms / 500 ms / 750 ms / 1000 ms12 APRSUNITS APRS display unit setting1 POSITION: dd°mm.mm' / dd°mm'ss''2 DISTANCE: km / mile3 SPEED: km/h / mph / knot4 ALTITUDE: m / ft5 BARO: hPa / mb / mmHg / inHg6 TEMP: °C / °F7 RAIN: mm / inch8 WIND: m/s / mph / knot13 BEACONINFOSELECTTransmit beacon information settingAMBIGUITY: OFF / 1 - 4 digit SPEED/COURSE: ON / OFF ALTITUDE: ON / OFF14 BEACONSTATUSTEXTStatus text input setting SELECT: TEXT 1 - 5 / OFFTX RATE: 1/1 - 1/8 / 1/2 (FREQ) - 1/8 (FREQ)TEXT 1 - 5: NONE / FREQUENCY / FREQ & SQL & SHIFT15 BEACONTX Beacon automatic transmit / manual transmission switchAUTO: OFF / ONINTERVAL: 30 sec - 60 min 5 minPROPORTIONAL: ON / OFFDECAY: ON / OFFLOW SPEED: 1 - 99 3 RATE LIMIT: 5 sec - 180 sec 30 sec16 DIGIPATHSELECT Digital repeater route settingOFF / WIDE 1-1 / WIDE1-1,WIDE2-1 / PATH 1 - PATH 4 / FULL 1 / FULL 217 DIGIPATH1 Digital repeater route address settingADDRESS 1: -ADDRESS 2: -18 DIGIPATH2 ADDRESS 1: -ADDRESS 2: -19 DIGIPATH3 ADDRESS 1: -ADDRESS 2: -20 DIGIPATH4 ADDRESS 1: -ADDRESS 2: -21 DIGIPATHFULL1 Digital repeater route address settingADDRESS 1: -ADDRESS 2: -ADDRESS 3: -ADDRESS 4: -ADDRESS 5: -ADDRESS 6: -ADDRESS 7: -ADDRESS 8: -22 DIGIPATHFULL2 ADDRESS 1: -ADDRESS 2: -ADDRESS 3: -ADDRESS 4: -ADDRESS 5: -ADDRESS 6: -ADDRESS 7: -ADDRESS 8: -Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-5.png)
![169Customize Menu Settings and User PreferencesSet-upMenuListMenu/Item ExplanationoffunctionAvailablesettings (DefaultvaluesshowninBOLD)APRS23 CALLSIGN(APRS) My call sign setting -24 MESSAGEGROUP Group filter setting for received messagesGROUP 1: ALL✽✽✽✽✽✽ GROUP 2: CQ✽✽✽✽✽✽✽GROUP 3: QST✽✽✽✽✽✽GROUP 4: YAESU✽✽✽✽GROUP 5: -GROUP 6: -BULLETIN 1: BLN?✽✽✽✽✽BULLETIN 2: BLN?BULLETIN 3: BLN?25 MESSAGEREPLY Automatic response setting of received messagesREPLY: OFF / ONCALLSIGN: ✽✽✽✽✽✽-✽✽REPLY TEXT: -26 MYPOSITIONSET My position setting GPS / MANUAL27 MYPOSITION My position manual settingLAT: N 0°00. 00' (' 00'')LON: E 0°00. 00' (' 00'')28 MYSYMBOL My symbol setting ICON1:[/>] CarICON 2: [/R] REC.VehicleICON 3: [/-] House QTH (VHF)USER: [YY] Yaesu Radios29 POSITIONCOMMENT Position comment settingOffDuty / En Route / In Service / Returning / Committed / Special / Priority / Custom 0 - 6 / Emergency!30 SmartBeaconing Smart beaconing setting 1 STATUS: OFF / TYPE 1 / TYPE 2 / TYPE 32 LOW SPEED: 2 - 30 53 HIGH SPEED: 3 - 90 704 SLOW RATE: 1 - 100 min 30 min5 FAST RATE: 10 - 180 sec 120 sec6 TURN ANGLE: 5 - 90° 28°7 TURN SLOPE: 1 - 255 268 TURN TIME: 5 - 180 sec 30 sec31 SORTFILTER Sort function / filter function settingSORT: TIME / CALLSIGN / DISTANCEFILTER : ALL / MOBILE / FREQUENCY / OBJECT/ITEM / DIGIPEATER / VoIP / WEATHER / YAESU / OTHER PACKET / CALL RINGER / RANGE RINGER / 1200 bps / 9600 bps32 VOICEALERT Voice alert function settingVOICE ALERT: NORMAL / TONE SQL / DCS / RX-TSQL / RX-DCSTONE SQL: 67.0 Hz - 254.1 Hz 100.0HzDCS: 023 - 754 023* Refer to the separate Operation Manual APRS Edition for details on the functions.SDCARD1BACKUP Reading and writing information of the radio to the micro-SD cardWrite to SD / Read from SD2GROUPID Reading and writing GROUP ID information to the micro-SD cardWrite to SD / Read from SDApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-6.png)
![170Customize Menu Settings and User PreferencesSet-upMenuListMenu/Item ExplanationoffunctionAvailablesettings (DefaultvaluesshowninBOLD)SDCARD3FORMAT Initializing the micro-SD card-OPTION1USBCAMERA Picture size / picture quality setting for the microphone with cameraPICTURE SIZE: 160 ✽ 120 / 320 ✽ 240PICTURE QUALITY: LOW / NORMAL / HIGH2Bluetooth Bluetooth headset settingAUDIO: AUTO / FIXBATTERY: NORMAL / SAVEVOX: ON /OFF GAIN: HIGH / LOW3VOICEMEMORY Voice memory function settingPLAY/REC: FREE5min / LAST 30 secANNOUNCE: AUTO / OFF / MANUALLANGUAGE: JAPANESE / ENGLISHVOLUME: HIGH / MID / LOWRX MUTE: ON / OFFRESET/CLONE1FACTORYRESET Return all settings to default settings when shipped-2PRESET Preset registration -3RECALLPRESET Recall preset -4 MEMCHRESET Erasing registered memory channels-5MEMCHSORT Sorting registered memory channels-6APRSRESET Return APRS settings to default settings when shipped-7CLONE Copy all saved data This radio → other / Other → This radioCALLSIGNCALLSIGN My call sign setting -Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-7.png)
![171Customize Menu Settings and User PreferencesUsingtheSet-upMenuScreendisplaysettingsSelectthescreentobedisplayedSet the type of screen to be displayed when pressing briefly.1 Press for one second or longer The set-up menu will be displayed.2 Touch [DISPLAY]$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Touch [1DISPLAYSELECT] The display setting screen will be displayed.Ż6#4)'6.1%#6+10&+52.#;&+52.#;5'.'%6#0)'41$#%-)4170&%1.14%1/2#559+&'$#0&5%12'ᲹᲺ$#%-$#%-4 Touch the item to be displayed Select from “ALTITUDE”, “TIMER/CLOCK” and “GPS INFO”, the screen that you would like to display. Each time the item is touched, the setting will switch between “ON” and OFF”.&+52.#;)25+0(1#.6+67&'((1((1((16+/'4%.1%-&+52.#;5'.'%6Ჹ$#%-$#%-5 Set the other screens as well Repeat Step 4 and set the other screens as well.6 Press for one second or longer The screen to be displayed will be set and the display will return to the previous screen. Tip Factory default value: All screens are set to “OFF”Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-8.png)
![172Customize Menu Settings and User PreferencesUsingtheSet-upMenuSwitchingbetweenCOMPASSandPOSITIONINFORMATIONscreensWhen using the GPS and GM functions, the screen will switch between the “Compass Screen” and the “Position Information (Latitude and Longitude) Display Screen”.1 Press for one second or longer The set-up menu will be displayed.2 Touch [DISPLAY]$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Touch [2TARGETLOCATION] to select the display content Each time this symbol is touched, the setting will switch between “COMPASS” and “NUMERIC”. COMPASS: The compass screen will be displayed. NUMERIC: The position information (latitude and longitude) display screen will be displayed. Tip Factory default value: COMPASSŻ6#4)'6.1%#6+10&+52.#;5'.'%6#0)'41$#%-)4170&%1.14%1/2#559+&'$#0&5%12'ᲹᲺ$#%-$#%-4 Press for one second or longer The display contents will be set and the display will return to the previous screen.SettingthedisplaybackgroundcolorThe display background color can be selected from the following 5 colors.• Orange • Green • Blue • Purple • GreyRefer to “Changing the background color of the frequency display area” ( P.60) for details.SettingthebandscopedisplaywidthThe frequency bandwidth and memory channel number to be displayed when band scope is running can be set.1 Press for one second or longer The set-up menu will be displayed.2 Touch [DISPLAY]$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 0Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-9.png)
![173Customize Menu Settings and User PreferencesUsingtheSet-upMenu3 Touch [4BANDSCOPE] to select the frequency width The frequency bandwidth will switch between “WIDE” and “NARROW” each time this symbol is touched. WIDE: The frequency bandwidth will be displayed using a wide search width. NARROW: The frequency bandwidth will be displayed using a narrow search width.VFOmode MemorymodeWIDE ±25 steps ±25 channelsNARROW ±12 steps ±5 channels Tip Factory default value: WIDE#0)'41$#%-)4170&%1.149+&'$#0&5%12'$#%-$#%-4 Press for one second or longer The bandwidth of the frequency will be set and the display will return to the previous screen.SettingthedisplaybrightnessThe brightness of the touch panel can be set.Refer to “Adjusting the display brightness” ( P.58) for details.SettingthedisplaycontrastThe contrast of the touch panel can be adjusted.Refer to “Adjusting the display contrast” ( P.58) for details.SwitchingthetimedisplayandthevoltagedisplayThe display at the top right of the display can be changed between “Time Display” and “Voltage Display”.1 Press for one second or longer The set-up menu will be displayed.2 Touch [DISPLAY]$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 0Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-10.png)
![174Customize Menu Settings and User PreferencesUsingtheSet-upMenu3 Touch [7TIME/VDD] to select the display content The display content changes between “TIME” and “VDD” each time the symbol is touched. TIME: The time will be displayed. VDD: The voltage will be displayed. Tip Factory default value: TIME6+/'.%&%1064#56 ⌽6+/'8&&ᲾᲿ$#%-$#%-4 Press for one second or longer The display content will be set and the display will return to the previous screen.TransmitandreceivesettingsSettingthesignalformatThe radio signal format can be selected from “FM”, “AM” and “NARROW FM” in the analog mode.Refer to “Changing the radio signal format” ( P.46) for details.SettingtheAMStransmissionmodeWhen operating in the AMS function, the transmit mode may be selected:1 Press for one second or longer The set-up menu will be displayed.2 Touch [TX/RX]$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Touch [DIGITAL]$#%-$#%-6:4:ŻŻ/1&'&+)+6#.#7&+1#761(/Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-16/User-Guide-2766351-Page-11.png)