Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM
Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM
Contents
- 1. User Manual
- 2. User Manual 1
- 3. User Manual 2
- 4. User Manual 3
- 5. User Manual 4
- 6. User Manual 5
- 7. User Manual 6
- 8. User Manual 7
- 9. User Manual 8
- 10. User Manual 9
- 11. User Manual 10
- 12. User Manual 11
- 13. User Manual 12
- 14. User Manual 13
- 15. User Manual 14
- 16. User Manual 15
- 17. User Manual 16
- 18. User Manual 17
- 19. User Manual 18
- 20. User Manual 19
- 21. User Manual 20
- 22. User Manual 21
User Manual 15
![151Functions to be Used when NecessaryCopyingtheRadioDatatoanotherTransceiverThe memory channels and settings in the set-up menu can be copied to another FTM-400XDR/DE. This is convenient when matching the settings of fellow stations that you communicate with frequently.Usingthemicro-SDcardThe data files saved in the FTM-400XDR/DE can be selected and copied to a micro-SD card.Copyingdatatoamicro-SDcard1 Insert the micro-SD card into the main body card slot2 Press for one second or longer The set-up menu will be displayed.3 Touch [SDCARD] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 04 Select and touch [1BACKUP] The screen for selecting the copy direction will be displayed.)4172+&$#%-72(14/#6ᲹᲺ5&%#4&$#%-$#%-5 Touch [WritetoSD] The screen for selecting the data files to be copied will be displayed. “ALL”: Copies all data. “MEMORY”: Copies only the memory channels and position information for backtrack use. “SETUP”: Copies only the settings in the set-up menu.$#%-$#%-$#%-725&%#4&&5QVGVᲲT95&QOTHFCG46 Select and touch the file to be copied The confirmation screen will be displayed.$#%-$#%-5&%#4&&5QVGVᲲT9#.. /'/14;5'672$#%-72Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-1.png)
![152Functions to be Used when NecessaryCopyingtheRadioDatatoanotherTransceiver7 Touch [OK?] The data selected in Step 6 will be copied to the micro-SD card. “Completed” will be displayed when the copying is completed.$#%-$#%-5&%#4&&5QVGVᲲT9#.. /'/14;5'672$#%-72%CPEGᲴ1-!#..8 Press for one second or longer The display will return to the previous screen.Copyingdatafromthemicro-SDcard1 Insert the micro-SD card into the FTM-400XDR/DE where the data is stored and copy the data to the card2 Remove the micro-SD card and insert it into the FTM-400XDR/DE that the data is going to be copied to3 Press for one second or longer The set-up menu will be displayed.4 Touch [SDCARD] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 05 Select and touch [1BACKUP] The screen for selecting the copy direction will be displayed.)4172+&$#%-72(14/#6ᲹᲺ5&%#4&$#%-$#%-6 Touch [ReadfromSD] The screen for selecting the data files to be copied will be displayed. “ALL”: Copies all data. “MEMORY”: Copies only the memory channels and position information for backtrack use. “SETUP”: Copies only the settings in the set-up menu.$#%-$#%-$#%-725&%#4&&5QVGVᲲT95&QOTHFCG4Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-2.png)
![153Functions to be Used when NecessaryCopyingtheRadioDatatoanotherTransceiver7 Select and touch the data to be copied The confirmation screen will be displayed. Tip Data that has not been saved in the micro-SD card cannot be touched.$#%-$#%-5&%#4&#.. /'/14;5'672$#%-725&QOTHFCG48 Touch [OK?] The data selected in Step 7 will be copied to the micro-SD card. “Completed” will be displayed when the copying is completed.$#%-$#%-5&%#4&#.. /'/14;5'672$#%-725&QOTHFCG4%CPEGᲴ1-!#..9 Press for one second or longer The display will return to the previous screen.TipThe group and member information saved in the memory using the GM function can be copied using the micro-SD card. Refer to the separate Operating Manual GM Edition for details (download the manual from the YAESU website).Usingtheclone functionUsing the clone function, all the data saved in the radio can be copied directly to another FTM-400XDR/DE.Example:WhenusingtheclonefunctionintwoFTM-400XDR/DEs1 Turn both FTM-400XDR/DEs OFF2 Plug in the optional clone cable “CT-166” into the respective [DATA] jacks at the back of the main bodies3 Turn both FTM-400XDR/DEs ON4 Press for one second or longer The set-up menu will be displayed.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-3.png)
![154Functions to be Used when NecessaryCopyingtheRadioDatatoanotherTransceiver5 Touch [RESET/CLONE] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 06 Select and touch [7CLONE] The screen for selecting the copy direction will be displayed.$#%-$#%-4'5'6%.10'/'/%*4'5'6/'/%*5146#2454'5'6%.10'ŻŻŻŻ7 Select and touch [Thisradio→other] in the FTM-400XDR/DE where the data is going to be copied from The confirmation screen will be displayed.$#%-$#%-%.10'4'5'6%.10'QVJGTᲘ6J ᲲUTCF ᲲQŻŻ6J ᲲUTCF ᲲQᲘQVJGT8 Select and touch [Other→Thisradio] in the FTM-400XDR/DE where the data is going to be copied to The confirmation screen will be displayed.9 Touch [OK?] for each one The data will be copied. “Completed” will be displayed when the copying is completed.$#%-$#%-%.10'4'5'6%.10'QVJGTᲘ6J ᲲUTCF ᲲQŻŻ6J ᲲUTCF ᲲQᲘQVJGT%CPEGᲴ1-!6J ᲲUTCF ᲲQᲘQVJGT%QPH ᲲTOᲲPI10 Press for one second or longer The display will return to the previous screen.11 Switch OFF both of the FTM-400XDR/DEs and disconnect the clone cableCautions zWhen “ERROR” is displayed during the copy (clone) operation, check the connection of the clone cable and start the clone operation all again. zWhen the operation is terminated before completion due to loss of power during the copy (clone) operation, the FTM-400XDR/DE where the data is being copied to will automatically be reset. Check if there is any abnormality in the power supply and start the cloning operation over againApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-4.png)
![155Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnectedThe provided PC connection cable “SCU-20” and other optional cables can be used to connect the radio to a personal computer as a COM port for the following operations.• Transmitting your own station position information to the personal computer for incorporation into the map software• Updating the firmware of the radio• Packet communicationUse the [DATA] jack at the back of the main body to connect with the personal computer. The pin assignment of the [DATA] jack is as follows.[DATA]jack➀ PKD (packet data input) (300 mVp-p)➁ GND➂ PSK (PTT)➃ RX 9600 (9600 bps packet data output)➄ RX 1200 (1200 bps packet data output) (300 mVp-p)➅ PK SQL (squelch control)➆ TXD (serial data output [transceiver → PC])➇ RXD (serial data input [transceiver ← PC])➈ CTS (data communication control)➉ RTS (data communication control)Connectingtoapersonalcomputer ●Preparations• Personal computer• PC connection cable “SCU-20” (accessories)… when connecting to the USB terminal of a personal computerTo the transceiverTo the personal computer (USB terminal)➀ PKD (packet data input)➁ GND➂ PSK (PTT)➃ RX 9600 (9600 bps packet data output)➄ RX 1200 (1200 bps packet data output)➅ PK SQL (squelch control)➆ TXD (serial data output [transceiver → PC])➇ RXD (serial data input [transceiver ← PC])➈ CTS (data communication control)➉ RTS (data communication control)Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-5.png)
![156Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnected• Data cable “CT-165” (optional)… when connecting to the RS-232C terminal of a personal computerTo the transceiver To the personal computer➀ -➁ GND➂ -➃ -➄ -➅ -➆ TXD (serial data output [transceiver → PC])➇ RXD (serial data input [transceiver ← PC])➈ CTS (data communication control)➉ RTS (data communication control)➀ -➁ TXD (serial data output [transceiver → PC])➂ RXD (serial data input [transceiver ← PC])➃ -➄ GND➅ -➆ CTS (data communication control)➇ RTS (data communication control)➈ -Tips• Make sure to switch off the power to the radio first before connecting.• When using the PC connection cable “SCU-20”, a dedicated driver needs to be installed in the personal computer. Download and use the driver and installation manual from the YAESU website.Sendingposition information to the computer1 Turn the radio ON2 Press for one second or longer The set-up menu will be displayed.3 Touch [DATA] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 04 Select and touch [1COMPORTSETTING] The screen for the detailed settings will be displayed.ŻŻŻ&#6#$#0&5'.'%6%1/21465'66+0)&#6#52''&ᲹᲺŻ&#6#537'.%*&#6#$#%-$#%-Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-6.png)
![157Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnected5 Touch [OUTPUT] to select “GPS OUT” The setting changes as follows each time it is touched. “OFF(camera)” → “GPS OUT” → “PACKET” → “WAYPOINT” Tip Factory default value: OFF (camera) Caution The snapshot function of the speaker microphone with camera will be inactivated when this is set to “OFF (camera)”.$#%-$#%-%1/21465'66+0)1((ECOGTC52''&92(+.6'4176276᳁ᲾᲸᲸDRU#..92(14/#6 0/'#Ჹ&#6#6 Touch [SPEED] to select the communication speed of the COM port The setting changes as follows each time it is touched. “4800 bps” → “9600 bps” → “19200 bps” → “38400 bps” → “57600 bps” Tip Factory default value: 9600 bps$#%-$#%-%1/21465'66+0))2517652''&92(+.6'4176276᳁ᲾᲸᲸDRU#..92(14/#6 0/'#Ჹ&#6#7 Press for one second or longer The display will return to the previous screen. The output of the position information data will start, and your own position information will be transmitted to the personal computer at intervals of about a second.TipAn operating software using NMEA-0183 standard GGA and RMC sentence is required to use the position information.UpdatingthefirmwareoftheradioThe firmware of the radio can be updated by connecting to a personal computer when Updated firmware is available.. Download and use the updated version of the firmware and the update manual from the YAESU website.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-7.png)
![158Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnectedUsingtheradioasatransceiverforpacketcommunicationPacket communication via this radio is possible by connecting this radio to the TNC (terminal node controller). ●Preparations• TNC• Personal computer• Data cable* … Prepare a data cable to match the connecting device* We supply the following optional products.• Data cable “CT-167” (optional)To the transceiverTo the TNC etc.➀ PKD (packet data input)➁ GND➂ PSK (PTT)➃ RX 9600 (9600 bps packet data output)➄ RX 1200 (1200 bps packet data output)➅ PK SQL (squelch control)➆ TXD (serial data output [transceiver → PC])➇ RXD (serial data input [transceiver ← PC])➈ CTS (data communication control)➉ RTS (data communication control)➀ Brown PKD (packet data input)➁ Black thick wire GND➂ Red PSK (PTT)➃ Orange RX 9600 (9600 bps packet data output)➄ Yellow RX 1200 (1200 bps packet data output)➅ Green PK SQL (squelch control)➆ Blue TXD (serial data output) [transceiver → PC])➇ Grey RXD (serial data input [transceiver ← PC])➈ White CTS (data communication control)➉ Black RTS (data communication control)• Data cable “CT-164” (optional)To the transceiver To the TNC etc.➀ PKD (packet data input)➁ GND➂ PSK (PTT)➃ RX 9600 (9600 bps packet data output)➄ RX 1200 (1200 bps packet data output)➅ PK SQL (squelch control)➆ -➇ -➈ -➉ -➀ PKD (packet data input)➁ GND➂ PSK (PTT)➃ RX 9600 (9600 bps packet data output)➄ RX 1200 (1200 bps packet data output)➅ PK SQL (squelch control)Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-8.png)
![159Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnected• Data cable “CT-163” (optional)To the transceiverTo the personal computer etc.To the TNC etc.➀ PKD (packet data input)➁ GND➂ PSK (PTT)➃ RX 9600 (9600 bps packet data output)➄ RX 1200 (1200 bps packet data output)➅ PK SQL (squelch control)➆ TXD (serial data output [transceiver → PC])➇ RXD (serial data input [transceiver ← PC])➈ CTS (data communication control)➉ RTS (data communication control)Dsub9pin➀ -➁ TXD (serial data output [transceiver → PC])➂ RXD (serial data input [transceiver ← PC])➃ -➄ GND➅ -➆ CTS (data communication control)➇ RTS (data communication control)➈ -DIN6pin➀ PKD (packet data input)➁ GND➂ PSK (PTT)➃ RX 9600 (9600 bps packet data output)➄ RX 1200 (1200 bps packet data output)➅ PK SQL (squelch control)Tips• Make sure to turn the power to the radio OFF before connecting.• Refer to the operating manual of the TNC used on how to connect the TNC to a personal computer.• RF receive interference may occur because of noise occurring in the personal computer.When signals cannot be received normally, keep the personal computer at a distance away from the radio and use a photo-coupler and noise filter to connect.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-9.png)
![160Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnected ●Setthepacketcommunicationoperation1 Turn the radio ON2 Press for one second or longer The set-up menu will be displayed.3 Touch [DATA] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 04 Select and touch [1COMPORTSETTING] The screen for the detailed settings will be displayed.ŻŻŻ&#6#$#0&5'.'%6%1/21465'66+0)&#6#52''&ᲹᲺŻ&#6#537'.%*&#6#$#%-$#%-5 Touch [OUTPUT] to select “PACKET” The setting changes as follows each time it is touched. “OFF(camera)” → “GPS OUT” → “PACKET” → “WAYPOINT” Tip Factory default value: OFF (camera) Caution The snapshot function of the speaker microphone with camera will be inactivated when this is set to “OFF (camera)”.$#%-$#%-%1/21465'66+0)1((ECOGTC52''&92(+.6'4176276᳁ᲾᲸᲸDRU#..92(14/#6 0/'#Ჹ&#6#6 Touch [SPEED] to select the communication speed of the COM port The setting changes as follows each time it is touched. “4800 bps” → “9600 bps” → “19200 bps” → “38400 bps” → “57600 bps” Tip Factory default value: 9600 bps7 Touch [BACK]$#%-$#%-%1/21465'66+0))2517652''&92(+.6'4176276᳁ᲾᲸᲸDRU#..92(14/#6 0/'#Ჹ&#6#8 Select and touch [2DATABANDSELECT] The screen for the detailed settings will be displayed.ŻŻŻ&#6#$#0&5'.'%6%1/21465'66+0)&#6#52''&ᲹᲺŻ&#6#537'.%*&#6#$#%-$#%-Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-10.png)
![161Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnected9 Touch [DATA] to select the band to be used for the packet communication The setting changes as follows each time it is touched. “A-BAND FIX” → “B-BAND FIX” → “A=TX/B=RX” → “A=RX/B=TX” → “MAIN BAND” → “SUB BAND” Tips • Refer to “Data communication settings” ( P.193) for details. • Factory default value: B-BAND FIX$#%-$#%-&#6#$#0&5'.'%6&#6##245&#6##$#0&(+:$$#0&(+:10 Touch [BACK]11 Select and touch [3DATASPEED] The screen for the detailed settings will be displayed.ŻŻŻ&#6#$#0&5'.'%6%1/21465'66+0)&#6#52''&ᲹᲺŻ&#6#537'.%*&#6#$#%-$#%-12 Touch [DATA] to select the packet communication speed The setting will switch between “1200 bps” and “9600 bps” each time it is touched. Tip Factory default value: 1200 bps$#%-$#%-&#6#52''&&#6##245&#6#DRUDRU13 Touch [BACK]14 Select and touch [4DATASQUELCH] The screen for the detailed settings will be displayed.ŻŻŻ&#6#$#0&5'.'%6%1/21465'66+0)&#6#52''&ᲹᲺŻ&#6#537'.%*&#6#$#%-$#%-15 Touch [DATA] to select the squelch detection method for the packet communication The setting switches between “RX BAND” and “TX/RX BAND” each time it is touched. Tips • Refer to “Data communication settings” ( P.193) for details. • Factory default value: RX BAND$#%-$#%-&#6#537'.%*&#6##245&#6#4:$#0&4:$#0&6: 10Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-11.png)
![162Functions to be Used when NecessaryUsingtheRadiowithanExternalDeviceConnected16 Press for one second or longer The display will return to the previous screen. Packet communication will be enabled.17 Choose the band and frequency according to the settings in the set-up menu18 Turn of the receive band The output level to TNC from the radio will be set.19 Adjust the TNC output level The input level to the radio will be set.CautionWhen transmitting a large volume of data, the transmission time gets longer and the radio will get heated up. When transmission continues for a long period of time, the overheating prevention circuit will act to lower the transmit power output. When transmission is continued further, transmission will be suspended automatically and the radio will go into the receive mode in order to prevent failure due to overheating.When the overheating prevention circuit is activated and the radio goes into the receive mode, either switch turn OFF the power, or wait until the temperature drops in the reception mode.Otherdevicesthatcanbeconnected ●ExternalspeakerAn optional high output and high sound quality waterproof external speaker “MLS-200-M10” can be connected.Plug the external speaker into the [EXT SP] jack at the back of the main body.TipWhen an external speaker is connected to the [EXT SP] jack, there will be no sound from the internal speaker.If you connect an External Speaker other than the MLS-200-M10 to the [EXT SP] Jack, use a Stereo Speaker only (Do not connect a Monaural Speaker plug directly into the [EXT SP] Jack.)If you wish to connect a Monaural Speaker to the [EXT SP] Jack, use the supplied "Stereo to Monaural Plug" (see figure).StereotoMonauralPlugMonauralSpeakerPlugApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-12.png)
![163Customize Menu Settings and User PreferencesUsing the set-up menu, the various functions of the radio can be customized to match your individual preferences and type of use. The functions are divided into menus such as display, transmission and reception, memory, device configuration etc.. It is easy to select the items that you would like to adjust from the respective lists and enter or select the settings that are easy to use.Set-upMenuBasicOperations1 Press for one second or longerThe set-up menu will be displayed.2 Touch the menu itemThe menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Select the item to be set Turn or touch the item.The item will turn orange in color. Tip Turn to select items that are not visible on the screen.$#%-$#%-24)4'8610'2#)'4%1&'53.':2#05+10$'..4+0)'45+) 0#.+0)1((1((*\ᲸᲸᲹᲽᲽᲾᲿ᳀Ż4 Change the set values Press briefly or touch the item.The set value will change each time it is pressed or touched. Tip When “>” is displayed in the set value field, pressing or touching an item will display the screen with the detailed settings.$#%-$#%-24)4'8610'2#)'4%1&'53.':2#05+10$'..4+0)'45+) 0#.+0)1((1((*\ᲸᲸᲹᲽᲽᲾᲿ᳀Ż5 Press for one second or longer, or press [PTT] on the microphoneThe chosen value will be confirmed and the display will return to the previous screen. Tips • The chosen value can also be confirmed by pressing briefly. • When setting additional items in the same menu next, touch [BACK]. The set value will be confirmed and the display will return to the menu list screen. • When [BACK] is touched in any of the screens, the display will return to the previous screen.TipWhen a set menu item is touched again, and the menu list is displayed, a screen in which a previously set item is already selected (displayed in orange color) will be displayed.CustomizeMenuSettingsandUserPreferencesApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-15/User-Guide-2766350-Page-13.png)