Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM
Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM
Contents
- 1. User Manual
- 2. User Manual 1
- 3. User Manual 2
- 4. User Manual 3
- 5. User Manual 4
- 6. User Manual 5
- 7. User Manual 6
- 8. User Manual 7
- 9. User Manual 8
- 10. User Manual 9
- 11. User Manual 10
- 12. User Manual 11
- 13. User Manual 12
- 14. User Manual 13
- 15. User Manual 14
- 16. User Manual 15
- 17. User Manual 16
- 18. User Manual 17
- 19. User Manual 18
- 20. User Manual 19
- 21. User Manual 20
- 22. User Manual 21
User Manual 10
![105Convenient FunctionsCommunicatingwithSpecifiedPartnerStations5 Turn to select the DSC code Tip Factory default value: 023&%5%1&'610'53.(4'3&6/( /'/14;#761&+#.'45+) 0#.+0)ᲸᲺ1((*\Ჽ᳀᳀ᲹᲺŻ6 Touch [2DCSCODE] The characters of the set value will turn green in color.&%5%1&'610'53.(4'3&6/( /'/14;#761&+#.'45+) 0#.+0)ᲸᲹ1((*\Ჽ᳀᳀ᲹᲺŻ&%5%1&'610'53.(4'3&6/( /'/14;#761&+#.'45+) 0#.+0)ᲸᲹ1((*\Ჽ᳀᳀ᲹᲺŻ7 Press for one second or longer The DCS code will be set and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.UsingDCS1 Press The function menu will be displayed.2 Touch [SQL] to display “D-TRX” Tips • When [SQL] is not displayed in the menu, use [BACK] or [FWD] to change the menu. • The squelch type changes in the following sequence each time it is touched. “NOISE” “T-TX” “T-TRX” “T-REV” “D-TRX” “PRGM” “PAGER” “D-TX”* “TT/DR”* “DT/TR”* * These squelch types will be displayed when [SIGNALING] → [8SQLEXPANSION] is set to “ON” in the set-up menu.ᲹᲽᲾᲸᲸᲹᲺ᳀;1-1*#/# ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ/76'5%12'/8 53.$#%- (9&/8 /76'5%12'53.01+5'53.&6/( The squelch will open only when the set DCS code is received.ᲹᲽᲾᲸᲸᲹᲺ᳀;1-1*#/# ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ/76'5%12'/8 53.$#%- (9&/8 /76'5%12'53.&64:53.&6/(TipA bell can be rung (beep) when signals containing the same DCS code are received ( P.110).Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-1.png)
![106Convenient FunctionsCommunicatingwithSpecifiedPartnerStationsUsingthepagerfunctionUse this function to call specified stations only by using a pager code that combines two CTCSS tones.CautionThe pager function does not work in the digital mode. Use the key when beginning operations to switch the communications to the auto-mode select function (AMS) or analog mode.Settingthereceivestationcode1 Press for one second or longer The set-up menu will be displayed.2 Touch [SIGNALING] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Turn , or touch the screen to select [5PAGERCODE]4 Touch [5PAGERCODE] The code setting screen will be displayed.$#%-$#%-2#)'4%1&'&6/(/'/14;$'..4+0)'424)4'8610'5+) 0#.+0)1((*\ᲸᲸᲹᲽᲽᲾᲿŻŻ5 Touch [RXCODE1] twice The characters of the set value will turn orange in color.$#%-$#%-2#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲽᲸᲸᲽᲿᲿᲽ6 Turn to select the code Select the first code from 01 to 50. Tip Factory default value: 052#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲸᲽᲿᲿᲽᲽᲸ7 Touch [RXCODE1] The characters of the set value will turn green in color.2#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲽᲹᲸᲽᲿᲿᲽApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-2.png)
![107Convenient FunctionsCommunicatingwithSpecifiedPartnerStations2#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲽᲹᲸᲽᲿᲿᲽ8 Touch [RXCODE2] twice The characters of the set value will turn orange in color.2#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲸᲽᲿᲿᲽᲽᲹ9 Turn to select the code Select the second code from 01 to 50. Tip Factory default value: 472#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲸᲽᲿᲿᲽᲽᲹ10 Touch [RXCODE2] The characters of the set value will turn green in color.2#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲸᲽᲸᲿᲽᲽᲹ2#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲸᲽᲸᲿᲽᲽᲹ11 Press for one second or longer Your own station code will be set and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.Tips• The two codes “05 47” and “47 05” will be recognized as the same code even if the order is different.• Three or more stations with the same code can be set (group code) to call all group members at the same time.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-3.png)
![108Convenient FunctionsCommunicatingwithSpecifiedPartnerStationsActivatingthepagerfunction1 Press The function menu will be displayed.2 Touch [SQL] to display “PAGER” Tips • When [SQL] is not displayed in the menu, use [BACK] or [FWD] to change the menu. • The squelch type changes in the following sequence each time it is touched. “NOISE” “T-TX” “T-TRX” “T-REV” “D-TRX” “PRGM” “PAGER” “D-TX”* “TT/DR”* “DT/TR”* * These squelch types will be displayed when [SIGNALING] → [8SQLEXPANSION] is set to “ON” in the set-up menu.ᲹᲽᲾᲸᲸᲹᲺ᳀;1-1*#/# ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ/76'5%12'/8 53.$#%- (9&/8 /76'5%12'53.01+5'53.&6/( The operating band will standby to receive in the pager mode.ᲹᲽᲾᲸᲸᲹᲺ᳀;1-1*#/# ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ/76'5%12'/8 53.$#%- (9&/8 /76'5%12'53.2#)'453.&6/(Recallingaspecifiedstation1 Press for one second or longer The set-up menu will be displayed.2 Touch [SIGNALING] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Turn , or touch the screen to select [5PAGERCODE]4 Touch [5PAGERCODE] The code setting screen will be displayed.$#%-$#%-2#)'4%1&'&6/(/'/14;$'..4+0)'424)4'8610'5+) 0#.+0)1((*\ᲸᲸᲹᲽᲽᲾᲿŻŻApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-4.png)
![109Convenient FunctionsCommunicatingwithSpecifiedPartnerStations5 Touch [TXCODE1] twice The characters of the set value will turn orange in color.$#%-$#%-2#)'4%1&'5+) 0#.+0)4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲸᲽ ᲿᲽᲸᲽᲹ6 Turn to select the code Select the first code from 01 to 50. Tip Factory default value: 05$#%-$#%-4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲸᲽ ᲿᲸᲽᲹ7 Touch [TXCODE1] The characters of the set value will turn green in color.$#%-$#%-4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲹᲸ ᲿᲸᲽᲹ$#%-$#%-4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲹᲸ ᲿᲸᲽᲹ8 Touch [TXCODE2] twice The characters of the set value will turn orange in color.$#%-$#%-4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲹᲸ ᲿᲸᲽᲹ9 Turn to select the code Select the second code from 01 to 50. Tip Factory default value: 47$#%-$#%-4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲹᲸ ᲿᲸᲽᲹ10 Touch [TXCODE2] The characters of the set value will turn green in color.$#%-$#%-4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲹᲸ ᲿᲸᲽᲹ$#%-$#%-4:%1&'Ჹ6:%1&'Ჹ4:%1&'Ჺ6:%1&'ᲺᲹᲸ ᲿᲸᲽᲹ11 Press for one second or longer The partner station code will be set and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.12 Activate the pager function13 Press the microphone [PTT] The partner station will be called.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-5.png)
![110Convenient FunctionsCommunicatingwithSpecifiedPartnerStationsNotificationofanincomingcallfromapartnerstationusingthebellWhen communicating using the tone squelch, DCS or pager, a bell (beep) can be sounded to provide notification that a signal has been received from a partner station.1 Press for one second or longer The set-up menu will be displayed.2 Touch [SIGNALING] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Touch [7BELLRINGER] to select the length of the bell ring The bell ring changes as follows each time it is touched. “OFF” “1 time” “3 times” “5 times” “8 times” “CONTINUOUS” Tip Factory default value: OFF$#%-$#%-2#)'4%1&'&6/(/'/14;$'..4+0)'424)4'8610'5+) 0#.+0)1((*\ᲸᲸᲹᲽᲽᲾᲿŻŻ4 Press for one second or longer The bell ring will be set and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.Othersquelchfunctions ●ReversetoneTouch [SQL] in the function menu to display “T-REV”.This is a communication method whereby a tone signal is sent out when there is no sound. When there is a sound, the tone signal will disappear. ●UserProgrammedReverseCTCSSDecoderTouch [SQL] in the function menu to display “PRGM”.The user programmable Reverse CTCSS Decoder will mute your FTM-400XDR/DE receiver when it receives a signal containing a CTCSS tone matching your programmed tone. The tone signal frequency can be set at 100 Hz intervals between 300 Hz and 3000 Hz using [SIGNALING] → [6PRGREVTONE] in the set-up menu.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-6.png)
![111Convenient FunctionsCommunicatingwithSpecifiedPartnerStations ●DCStransmissionTouch [SQL] in the function menu to display “D-TX”.The radio sends out the DCS code during transmit.This can be used only when [SIGNALING] → [8SQLEXPANSION] is set to “ON” in the set-up menu. ●Tonetransmission/DCSreceptionTouch [SQL] in the function menu to display “TT/DR”.The radio sends out a tone signal during transmit and goes into receive standby for the previously set DCS codes.This can be used only when [SIGNALING] → [8SQLEXPANSION] is set to “ON” in the set-up menu. ●DCStransmission/tonereceptionTouch [SQL] in the function menu to display “DT/TR”.The radio sends out the DCS code during transmit and goes into receive standby for the previously set squelch tone.This can be used only when [SIGNALING] → [8SQLEXPANSION] is set to “ON” in the set-up menu.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-7.png)
![112Convenient FunctionsUsingtheDTMFFunctionThe DTMF (Dual Tone Multi Frequencies) is a “peepoppa” sound heard from a telephone receiver when a call is made on a push phone line. This radio can send out the DTMF code by using the microphone keys or recalling a memory.A DTMF code with a maximum of 16 digits can be registered in up to 9 channels in the memory. It is convenient to register beforehand telephone numbers that are used for connecting to a public line from a phone patch.TipThe DTMF code is issued based on a combination of the following frequencies.1209 Hz 1336 Hz 1477 Hz 1633 Hz697 Hz 1 2 3 A770 Hz 4 5 6 B852 Hz 7 8 9 C941 Hz ✽0 # DRegisteringtheDTMFcode1 Press for one second or longer The set-up menu will be displayed.2 Touch [SIGNALING] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Turn , or touch the screen to select [4DTMFMEMORY]4 Touch [4DTMFMEMORY] The DTMF memory screen will be displayed.$#%-$#%-2#)'4%1&'&6/(/'/14;$'..4+0)'424)4'8610'5+) 0#.+0)1((*\ᲸᲸᲹᲽᲽᲾᲿŻŻ5 Turn or touch the screen to select the channel to be registered6 Touch the selected channel The character input screen will be displayed.$#%-$#%-5+) 0#.+0)ᲽᲾᲽᲾ#$%&ᲹᲺᲽᲾᲿ᳀ᲹᲺ᳁ ᳂&6/(/'/14;Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40](https://usermanual.wiki/Yaesu-Musen/20345X40.User-Manual-10/User-Guide-2766137-Page-8.png)