Yaesu Musen 10503220 VHF FM Handheld Transceiver User Manual Safety Training and License Information

Yaesu Musen Co., Ltd. VHF FM Handheld Transceiver Safety Training and License Information

Safety Training and License Information

Vertex Standard Co., Ltd.SAFETY TRANING INFORMATIONThis Radio has been tested and complies with the Federal Communications Commission (FCC) RFexposure limits for Occupational Use/Controlled exposure environment. In addition, it complies with thefollowing Standards and Guidelines:- FCC　96-326, Guidelines for Evaluating the Environmental Effects of Radio-Frequency Radiation.- FCC OET Bulletin 65 Edition 97-01 (1997) Supplement C, Evaluating Compliance with FCC Guidelines forHuman Exposure to Radio Frequency Electromagnetic Fields.- ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to RadioFrequency Electromagnetic Fields, 3kHz to 300 GHz.- ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially HazardousElectromagnetic Fields-RF and Microwave. WARNING:This radio generates RF electromagnetic energy during transmit mode. This radio is designed for andclassified as Occupational Use Only, meaning it must be used only during the course of employment byindividuals aware of the hazards, and the ways to minimize such hazards. This radio is not intended for useby the General Population in an uncontrolled environment. CAUTION:To ensure that your expose to RF electromagnetic energy is within the FCC allowable limits for occupationaluse, always adhere to the following guidelines:- This radio is NOT approved for use by the general population in an uncontrolled environment. Thisradio is restricted to occupational use, work related operations only where the radio operatormust have the knowledge to control its RF exposure conditions.- When transmitting, hold the radio in a vertical position with its microphone 1 to 2 inches (2.5 to 5cm) away from your mouth and keep the antenna at least 1 inch (2.5cm) away from your head andbody.- The radio must be used with a maximum operating duty cycle not exceeding 50 %, in typicalPush-to-Talk (PTT) configurations.DO NOT transmit for more than 50 % of total radio use time (50 % duty cycle). Transmitting morethan 50 % of the time can cause FCC RF exposure compliance requirements to be exceeded.The radio is transmitting when the red LED on the top of the radio is illuminated. You can causethe radio to transmit by pressing the PTT button.- DO NOT transmit when the radio is used in Body Worn configuration with the following accessory:belt-clip (Parts # CP7064001).It must be used ONLY for (1) there is a 4 cm distance from the body during transmitting, (2)monitoring purposes, using the speaker only and (3) for carrying purposes.- Always use Vertex Standard authorized accessories.The information listed above provides the user with the information needed to make him or her aware of RFexposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio.Electromagnetic Interference/CompatibilityDuring transmissions, this radio generates RF energy that can possibly cause interference with otherdevices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.Do not operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals,health care facilities, aircraft, and blasting sites.
Vertex Standard Co., Ltd.FCC LICENSE INFORMATIONThis radio operates on communications frequencies which are subject to FCC (Federal CommunicationsCommission) Rules and Regulations. FCC Rules require that all operators using Private Land Mobile radiofrequencies obtain a radio license before operating their equipment.

Navigation menu