YEALINK W53H DECT IP Phone User Manual

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. DECT IP Phone

User manual

For W60B firmware: 77.83.0.X or laterFor W53H firmware: 88.83.0.X or laterQuick Start Guide(V83.X)DECT IP PhoneW53P & W53H
1Note: We recommend that you use the accessories provided or approved by             Yealink.          The use of unapproved third-party accessories may result in reduced              performance.W53P Package ContentsNote: Yealink W53P DECT IP phone consists of one W60B base station and one            W53H handset.W53H Package ContentsW53H Headset W60B Base Station Base Stand USB Charger Cradle 2 Power AdaptersEthernet Cable Belt Clip Rechargeable Battery Quick Start Guide Handset Protective Case(Optional)W53H Headset USB Charger Cradle 2 Power Adapters Belt ClipRechargeable Battery Handset Protective Case(Optional)
2Remove the snap-fits from the holes horizontally.MACSN MACSN MACSN W60B Package Contents1. Connect the base station power and the network using        Method a or Method b.a. AC Power Option                           b. PoE (Power Over Ethernet) OptionNote•   If you choose Method a, use Yealink-supplied power adapter (5V/600mA).     A third-party power adapter may damage the base station.•  If you choose Method b, you do not need to connect the power adapter.      Make sure the hub/switch is PoE-compliant. 2a. (Desktop Installation) Attach and remove the base stand.         Attach the Base Stand                                  Remove the Base Stand                      Assembling the DECT PhoneW60B Base Station Base Stand Power Adapter Ethernet Cable Quick Start GuideAlign the snap-fits with the corresponding holes and push  forward, snapping them into the holes.
2b. (Wall-Mount Installation) Attach the base station.3. Insert the battery into the handset.4. Attach the Belt Clip.5. (Optional) Mount the charger cradle to the wall.3MACSN 59mm59mmMACSN 40mm40mmsn
6. Connect the charger cradle and charge the handset.Note•  Use Yealink-supplied power adapter (5V/600mA). A third-party power adapter    may damage the handset.•  Check the charging status on the top right corner of the LCD screen.Shortcut KeysShortcut keys help you quickly access to frequently used phone features. De-scribe the default shortcut-keys behaviors:               Entering and Editing Data•  Press    one or more times to switch among different input modes or type   “#”. •  Press   to provide the special characters to choose or to type “*”. •  Press a digit key one or more times to type the desired character or digit. •  Press the Del soft key to delete entered characters. •  Press the Save soft key to accept the change or Back to cancel.    1   Access the call history record.   2   Check the line status.    3   Access the intercom list, select one to place an          internal call.   4   Decrease the ringer volume.     5   Increase the ringer volume.    6   Access the directory list.4256134Getting Started
Handset RegistrationYou can register up to 8 handsets to one W60B base station. Each handset can be registered to 4 different base stations.When the handset LCD screen prompts “Unregistered!”,  long press    on the base station till the registration LED flashes. There are two methods to register a new handset:    Easy Registration: 1. Press the Reg soft key on the handset to register quickly.Normal Registration:1. Press the OK soft key on the handset, and then select Register Handset.2. Select the desired base station and then press the OK soft  key.  The  handset begins searching the base station.3. Press the OK soft key after searching a base station successfully.4. Enter the base station PIN (default: 0000), and then press the Done soft key tocomplete registration.To register to multiple base stations, press OK to enter the main menu, and se-lect Settings->Registration->Register Handset, then repeat steps 2-4.Note: • If the handset is registered to the base station successfully, the handset LCDscree prompts “Handset Subscribed” and “Base NO.”( the last 4 characters indicate the base station’s MAC address).• If the handset LCD screen prompts “Searching for Base”, check that your basestation is powered on.Network SettingsYou can configure the base station to obtain network settings in one of the fol-lowing ways:  DHCPBy default, the base station attempts to contact a DHCP server in your network to obtain the valid network settings, such as IP address, subnet mask, gateway ad-dress and DNS address.  StaticIf the base station cannot contact a DHCP server for any reason, you need to  configure the IP address, subnet mask, gateway address, primary DNS address  and secondary DNS address for the base station manually.5
To configure the network parameters for the base station manually: 1. Press the OK key to enter the main menu, and then select Settings->System    Settings ->Network (default PIN: 0000)->Basic.2. Select the desired IP addressing mode from the IP Mode field.3. Press   to select the desired IP addressing mode.4. Make the desired changes.5. Press the Save soft key to accept the change.Note: •  The IP DECT phone supports either or both IPv4 and IPv6 addressing modes,    but IPv6 is disabled by default.•  Wrong network settings may result in inaccessibility of your DECT phone and    may affect the network performance. Contact your system administrator for    the network parameters.Turning Handset On/OffTo turn the handset on, do one of the following:•  Press   , then the LCD screen lights up. •  Place the handset in the charger cradle. The handset will be turned on     automatically.To turn the handset off:Long press   to turn the handset off. Locking/Unlocking Keypad•  Long press   when the handset is idle to lock the keypad.        •  Long press   again to unlock the keypad.Silent Mode•  Long press   when the handset is idle to switch the silent mode to on. •  Long press   again to switch the silent mode to off. 6Basic Operations
Handset Name To rename the handset:1. Press the OK key to enter the main menu, and then select Settings->Handset   Name.2. Edit the value in the Rename field. 3. Press the Save soft key to accept the change. Volume Adjustment•  Press   or   when the handset is idle or ringing to adjust the ringer volume. •  Press   or   during a call to adjust the receiver volume of speakerphone/    earpiece/earphone. Ring Tones1. Press the OK key to enter the main menu, and then select Settings->   Audio->Ring Tones->Melodies.2. Press   or   to highlight the Intercom Call or the desired line.  3. Press   or   to select the desired ring tone. 4. Press the Save soft key to accept the change. Local DirectoryTo add a contact:1. Press the OK key to enter the main menu, and then select Directory->Local   Directory. 2. Press the Options soft key, and then select New Contact.   3. Enter the desired value in the Name, Office, Mobile and Other field     respectively. 4. Press the Save soft key to accept the change. To edit a contact:1. Press the OK key to enter the main menu, and then select Directory->Local   Directory.  2. Press   or   to highlight the desired entry. 3. Press the Options soft key, and then select Edit. 4. Edit the desired value in the Name, Office, Mobile and Other field      respectively.     5. Press the Save soft key to accept the change. 7Handset Settings
8To delete a contact:1. Press the OK key to enter the main menu, and then select Directory->Local Directory. 2. Press   or   to highlight the desired entry.3. Press the Options soft key, and then select Delete to delete the selected entry.Speed Dial1. Press the OK key to enter the main menu, and then select Settings->Telephony->Speed Dial.2. Press   or   to highlight the desired digit key, and then press the Assign softkey.3. Press    or   to select the desired directory type.4. Press   or   to highlight the desired entry, and then press the OK soft key.If both the office number and mobile number are stored, press   or   tohighlight the desired number, and then press the OK soft key again.Basic Call FeaturesPlacing CallsTo place a call directly:1. Do one of the following:• Enter the desired number when the handset is idle.• Press   to enter the pre-dialing screen. Enter the desired number using thekeypad.    If there are multiple lines assigned to your handset as outgoing lines, press           the Line soft key to select the desired line. If you do not select a line, the hand       set uses the default outgoing line to dial out.2. Press  ,    or    to dial out.To place a call from the local directory:  1. Press   when the handset is idle.2. Press    or    to select the desired directory type.3. Highlight the desired entry, and then press   or    to dial out using the defaultline.If multiple numbers for the contact are stored, press   or   to highlight thedesired number, and then press   or   again to dial out using the default line.To place a call from the call history:1. Press the History soft key when the handset is idle, and then select the   desired call history list.
2. Press   or   to highlight the desired entry, and then press   or   to dial outusing the default line.To place a call from the redial list:1. Press   when the handset is idle.2. Press   or   to highlight the desired entry, and then press   or   .To place a call using the speed dial key:Long press the speed dial key to call the preset number directly. Answering CallsTo answer a call, do one of the following:• Press the Accept soft key.• Press   .• Press   .• Press   .Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by pressing   .Ending CallsPress   . Call Mute• Press  during a call to mute the call. • Press  again to un-mute the call. Call Hold and ResumeTo place a call on hold:Press the Options soft key during a call, and then select Hold.   To resume a call, do one of the following:• If there is only a call on hold, press the Resume soft key.• If there are two calls on hold, press the Resume soft key to resume the current call.Press the Swap soft key to swap between calls.9
10Call TransferYou can transfer a call in the following ways:Blind Transfer1. Press the Options soft key during a call, and then select Transfer.2. Enter the number you want to transfer the call to.3. Press the Transfer soft key.Semi-Attended Transfer1. Press the Options soft key during a call, and then select Transfer.2. Enter the number you want to transfer the call to.3. Press  ,    or    to dial out.4. Press the Transfer soft key when you hear the ring-back tone.Attended Transfer1. Press the Options soft key during a call, and then select Transfer.2. Enter the number you want to transfer the call to.3. Press  ,    or    to dial out.4. Press the Transfer soft key after the call is answered.Call ForwardTo enable the call forward feature on a specific line:1. Press the OK key to enter the main menu, and then select Call Features->Call Forward. 2. If there are multiple lines assigned to your handset, press   or   to highlight the desired line, and then press the OK soft key. 3. Press   or   to  highlight the desired forwarding type, and then press the OKsoft key.• Always----Incoming calls are forwarded immediately.• Busy----Incoming calls are forwarded when the line is busy.• No Answer----Incoming calls are forwarded if not answered after a period oftime.4. Select Enabled from the Status field.5. Enter the number you want to forward the incoming calls to in the Target  field.  For No Answer Forward, press   or   to select the desired ring time to waitbefore forwarding in the After Ring Time field.6. Press the Save soft key to accept the change.
11About YealinkYealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution provider that primarily offers video conferencing systems and voice communication solutions. Founded in 2001, Yealink leverages its indepen-dent research and development and innovation to pursue its core mission: “Easy collaboration, high productivity.” The company’s high-quality UC terminal solutions enhance the work efficiency and competitive advantages of its customers in over 100 countries. Yealink is the world’s second-largest SIP phone provider and is number one in the China market.Technical SupportVisit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. Web: www.yealink.comAddr: 309, 3rd Floor, No.16, Yun Ding North Road, Huli           District, Xiamen City, Fujian, P.R. ChinaCopyright©2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.All rights reserved.
FCC CAUTION: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC WARNING: Privacy of communications may not be ensured when using this telephone. Les communications effectuées au moyen de cet appareil ne sont pas nécessairement protégées des indiscrétions. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à  la norme NMB-003 du Canada. The device is compliance with RF exposure guidelines, user can obtain Canadian information on RF exposure and compliance. Le présent appareil est conforme Après examen de ce materiel aux conformité ou aux limites d'intensitè de champ RF, Les utilisateurs peuvent sur l'exposition aux radiofréquences et la conformité and compliance d'acquérir.

Navigation menu