Worldline n v MOPLU200 NFC Portable Payment terminal User Manual YOXIMO Owner Manual

Worldline s.a./n.v. NFC Portable Payment terminal YOXIMO Owner Manual

Contents

User Manual

OWNER  MANUALan atos company••••••YOMOVAportable paymentsstreamlined innovation
YOMOVA portable owner manualLegal disclaimer and copyrightsThe information in this document is subject to change without notice and shall not be construed as a commitment by Worldline S.A./N.V. (“Worldline”)The content of this document, including but not limited to trademarks, designs, logos, text, images, is the property of Worldline and is protected by the Belgian Act of 30.06.1994 related to authors’ rights and by the other applicable Acts.The word YOMOVA and other trademarks used in this document are the property of Worldline. Worldline trademarks used in this document are indicated. Linux is a registered trademark of Linus Torvalds, Java is a registered trademark of Oracle and/or its affiliates and Android is a trademark of Google Inc.The contents of this document can be reproduced by or on behalf of third parties with the prior written consent of Worldline and following its instructions. Worldline accepts no responsibility for errors and omissions introduced when translating or reworking this document.Except with respect to the limited licence to download and print certain material from this document for non-commercial and personal use only, nothing contained in this document shall grant any licence or right to use any of Worldline's proprietary material.While Worldline has made every attempt to ensure that the information contained in this document is correct, Worldline does not provide any legal or commercial warranty on the document that is described in this specification. The technology is thus provided “as is” without warranties of any kind, expressed or implied, included those of merchantability and fitness for a particular purpose. Worldline does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, product or processes disclosed.To the fullest extent permitted under applicable law, neither Worldline nor its affiliates, directors, employees and agents shall be liable to any party for any damages that might result from the use of the technology as described in this document (including without limitation direct, indirect, incidental, special, consequential and punitive damages, lost profits).These terms shall be governed by and construed in accordance with the laws of Belgium. You irrevocably consent to the jurisdiction of the courts located in Brussels for any action arising from or related to the use of this document.Document informationdocument title YOMOVA portable – owner manualsecurity unrestrictedlast modified 7 October 2016owner Philippe Lesireauthor Niels Grundtvig Nielsenversion 2.1© Worldline 2014, 2016
public iymvP_ownerManualTOC.fm document release 2.1 last updated 7/10/16ContentsIntroduction ............................................................................................................ 1About the YOMOVA ................................................................................................. 1About this manual..................................................................................................... 2What is new in this version....................................................................................... 2Change log............................................................................................................... 2Terminal and accessories ..................................................................................... 3YOMOVA top view ................................................................................................... 3YOMOVA side view.................................................................................................. 4YOMOVA bottom view ............................................................................................. 4Connector compartment..................................................................................... 5Card/battery compartment ................................................................................. 6Options and accessories.......................................................................................... 6Installing the YOMOVA portable........................................................................... 7Unpacking the YOMOVA.......................................................................................... 7Preparing a YOMOVA for operation......................................................................... 8Selecting a location .................................................................................................. 8Installing SIM or SAM............................................................................................... 8Loading paper ........................................................................................................ 10Fitting the battery.................................................................................................... 12Charging the battery............................................................................................... 14Powering a YOMOVA with the mains adaptor ....................................................... 15Using the YOMOVA portable............................................................................... 17Security recommendations..................................................................................... 17Reading a chip card ............................................................................................... 17Reading a magstripe card ...................................................................................... 18Reading a contactless card/device......................................................................... 19Resetting the YOMOVA – Reset button................................................................. 19Resetting the YOMOVA – keyboard....................................................................... 20Resetting the YOMOVA – remove the battery ....................................................... 20Power off ................................................................................................................ 20Caring for the battery........................................................................................... 21Removing the battery ............................................................................................. 21
YOMOVA portable owner manualii empty for double-sided printing ymvP_ownerManualTOC.fmBattery monitoring .................................................................................................. 22Maintaining the YOMOVA portable..................................................................... 23Cleaning the YOMOVA .......................................................................................... 23Cleaning the card readers...................................................................................... 24Troubleshooting................................................................................................... 25Operating your YOMOVA portable safely.......................................................... 27Operating conditions .............................................................................................. 27Electrical installations....................................................................................... 27Power supply / battery...................................................................................... 28Printer and paper ............................................................................................. 28Wireless interference ....................................................................................... 28Opening the terminal.............................................................................................. 29Servicing................................................................................................................. 29Approvals.............................................................................................................. 31Decommissioning a YOMOVA ............................................................................ 33Step by step ........................................................................................................... 33
public iiiymvP_ownerManualLOF.fm document release 2.1 last updated 7/10/16FiguresFigure 1. YOMOVA top view .......................................................................................... 3Figure 2. Keypad layout.................................................................................................. 3Figure 3. YOMOVA side view......................................................................................... 4Figure 4. YOMOVA countertop – bottom view ............................................................... 4Figure 5. Connector compartment.................................................................................. 5Figure 6. Card compartment........................................................................................... 6Figure 7. Removing the card/battery cover .................................................................... 8Figure 8. Opening SIM/SAM holder................................................................................ 9Figure 9. Inserting card and closing holder .................................................................... 9Figure 10. Opening paper compartment....................................................................... 10Figure 11. Inserting paper roll....................................................................................... 10Figure 12. Closing paper compartment ........................................................................ 11Figure 13. Tearing off paper......................................................................................... 11Figure 14. Inserting the battery..................................................................................... 12Figure 15. Clicking battery in place .............................................................................. 13Figure 16. Closing the battery cover............................................................................. 13Figure 17. Connecting the battery charger................................................................... 14Figure 18. Removing connector compartment cover.................................................... 15Figure 19. Power input socket underneath terminal..................................................... 16Figure 20. Closing the connector compartment............................................................ 16Figure 21. Reading a chip card .................................................................................... 18Figure 22. Reading a magstripe card ........................................................................... 18Figure 23. Reading a smart card with the contactless reader ...................................... 19Figure 24. Reset button on YOMOVA .......................................................................... 20Figure 25. Removing card/battery cover ...................................................................... 21Figure 26. Removing the battery .................................................................................. 22Figure 27. Cleaning the card-readers........................................................................... 24
YOMOVA portable owner manualiv empty for double-sided printing ymvP_ownerManualLOF.fm
public 1ymvP_introduction.fm document release 2.1 last updated 7/10/16IntroductionThis document includes information for the YOMOVA terminal. It is intended as a resource where distributors can find the information they need to assemble and translate their own documentation.Places where cross-references should be included are identified with [xref]About the YOMOVAThe YOMOVA is a compact, fully-featured, versatile payment terminal, as easy to carry around in a restaurant as it is to use on a countertop. It is powered by the latest Worldline dedicated dual-core processor, giving unrivalled performance and security plus the environmental benefit of intelligent power management features.The large full-colour display with touch panel enhances the user experience by supporting optimum interaction. The integrated PIN protection shield around the ergonomic keypad prompts the cardholder to trust the YOMOVA and makes it easy to use with confidence.The YOMOVA accepts chip cards and magstripe cards, and interfaces with contactless devices (cards, smart phones …) through its integrated antenna. It can be integrated with local POS systems (ECR, tablet …) using wired or local wireless communications (RS 232, WLAN, Bluetooth).The impressive hardware specification is completed with a fast and silent integrated printer.
YOMOVA portable owner manual2 publiclast updated 7/10/16 document release 2.1 ymvP_introduction.fmAbout this manualThis manual contains information for owners of YOMOVA terminals, with sections covering:•terminal and accessories•installing the terminal•powering up the terminal•using the terminal•maintaining the terminal•troubleshooting•safety information•technical specificationsWhat is new in this versionVersion 2.1 contains a new appendix Operating your YOMOVA portable safely, on page 27.Changes/updates in this version are indicated with a change bar. A change bar for a heading or title means that everything until the next heading has been changed or updated. Significant deletions are struck through in grey.Change logdocument release 2.0Extra information about recommended security checks, in the chapter Installing the YOMOVA portable and under Security recommendations, on page 17.
public 3ymvP_description.fm document release 2.1 last updated 7/10/16Terminal and accessoriesThe YOMOVA portable is battery powered, and supports 3G, Wi-Fi, Bluetooth, RS 232 and USB (device) connectivity..YOMOVA top viewFigure 2. Keypad layoutFigure 1. YOMOVA top view1 magstripe-card reader 4 battery charger connector2 chip-card reader 5 integrated NFC reader under display3 integrated PIN privacy shield against shoulder-surfing369.OK2580Corr147StopMenu23145123abc def456ghi jkl mno78 9pqrs tuv wxyz0Menu .[StopXOKCorr<
YOMOVA portable owner manual4 publiclast updated 7/10/16 document release 2.1 ymvP_description.fm•the Corr key is also used to turn the terminal on and to reset it•the Stop key is also used to power down the terminalYOMOVA side viewYOMOVA bottom viewFigure 3. YOMOVA side view1 Kensington™ lock fixing point2 battery charger connector1 2Figure 4. YOMOVA countertop – bottom view1 connector compartment2 contacts3 card/battery compartment231
public 5ymvP_description.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manualConnector compartmentFigure 5. Connector compartment1 COM – RS2322 USB device3 power input (mains adaptor)COMMini USB123
YOMOVA portable owner manual6 publiclast updated 7/10/16 document release 2.1 ymvP_description.fmCard/battery compartmentOptions and accessoriesSpecial cables are available to connect the YOMOVA to peripheral devices with an RS232 port or a USB (device) port.When using your YOMOVA portable with a wired connection to ePOS equipment such as a cash register, consider removing the battery and powering your YOMOVA portable with a mains adaptor for more convenience. See Powering a YOMOVA with the mains adaptor, on page 15.Figure 6. Card compartment1 battery contacts2 SIM card holder3 SAM card holdersSIMSAM1SAM2123
public 7ymvP_install.fm document release 2.1 last updated 7/10/16Installing the YOMOVA portableYou can call upon a technician or a field engineer to help you install your terminal or you can do it yourself. If you decide to install the terminal yourself, remember the guidelines below.•if you decide to install the YOMOVA yourself, Worldline nor its vendor will bear any responsibility or cost for malfunctioning, breakdowns or any anomaly that may result from incorrect manipulation of the terminal•read the safety recommendations on page 48 before starting to install your YOMOVA.•if you notice that any part of the YOMOVA does not fit, blocks or shows any other malfunction, contact your vendor – do not try yourself to repair or alter it in any way.•use only accessories (battery, power adaptor, cables and so on) provided by your vendor or by an approved sourceCheck that installation/maintenance operations are performed by a trusted person. Log all maintenance operations, including the name of the operator.In the tampered state, the device displays a warning message and it is not possible to use the terminal to make a payment. When a warning message is displayed:1. remove the terminal from service2. contact the supplier immediately, who may then report the problem to Worldline3. keep the terminal available for possible forensic investigationUnpacking the YOMOVA1. Open the package and check the contents.The package should contain a portable YOMOVA, a battery and a battery charger. If any of these is missing, contact your vendor immediately.Your vendor may also have included paper for the printer, documentation or accessories.2. Inspect the package and its contents for damage.If anything is missing or damaged, contact your shipping company immediately and notify your vendor.3. Save the box for repacking or moving your equipment in the future.4. Check the terminal as described in Security recommendations, on page 17.!
YOMOVA portable owner manual8 publiclast updated 7/10/16 document release 2.1 ymvP_install.fmPreparing a YOMOVA for operation1. Make sure the location and operating conditions are suitable.2. Install the SIM, SAMs, or both, as required.3. Fit the battery.4. Put a roll of paper in the printer.5. Connect the battery charger and make the sure the battery is charged before you use the YOMOVA for the first time.Selecting a locationFinding a proper location is an important aspect of installing your YOMOVA. You need to balance comfort and security. Follow the guidelines below to find a location that is convenient for both you and your customers.Make sure that customers have the necessary privacy when entering their PIN code. This means locating the YOMOVA outside the field of vision of cameras, mirrors and so on.Make sure you have room to open the cover of the printer and replace the paper.Installing SIM or SAMTo communicate via GSM/GPRS/3G with a YOMOVA, you need to fit a SIM.The SIM and SAM slots in the YOMOVA are located underneath the battery, and clearly labelled.•make sure that the mains adaptor is not connected to the YOMOVA•avoid electrostatic discharge as it can severely damage the equipment1. Remove the card/battery cover.Figure 7. Removing the card/battery cover!21
public 9ymvP_install.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manual2. Remove the battery, if one is present; see Figure 26. Removing the battery, on page 22.3. Open the SIM/SAM holder: slide the latch towards the hinge until you hear a click, then lift the holder.Figure 8. Opening SIM/SAM holder4. Insert the SIM/SAM in the holder with the bevel towards the open end of the holder.Make sure the card is completely inserted.5. Close the SIM/SAM holder.Figure 9. Inserting card and closing holderMake sure the bevel fits behind the corner, then shift the lid down until you hear a click.6. Make sure all SIM/SAM holders are closed.7. Replace the battery, if it was already fitted and there are no other cards to be installed.8. Replace the card/battery cover, if there are no other cards to be installed.
YOMOVA portable owner manual10  publiclast updated 7/10/16 document release 2.1 ymvP_install.fmLoading paperOnly use paper approved by Worldline.This paper can be recognised by the approval seal printed on the back of the paper. If you want to order paper from your local paper supplier, contact your vendor.1. Lift the cover to release it, then open it fully.Do not remove the roller inside the paper compartment.Figure 10. Opening paper compartment2. Unroll about 5 centimetres of a new paper roll and insert the roll as shown.Figure 11. Inserting paper rollWhen inserting a paper roll, make sure that:– the paper is not cracked, wrinkled or sealed– the paper comes out straight3. Close the paper cover, and press firmly until you hear a click.
public 11ymvP_install.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manualFigure 12. Closing paper compartment4. Tear off the leading edge of the paper.Figure 13. Tearing off paper
YOMOVA portable owner manual12  publiclast updated 7/10/16 document release 2.1 ymvP_install.fmFitting the batteryThe YOMOVA is normally powered by a battery, which must be recharged in the terminal.•only use the battery that is supplied with your YOMOVA•charge the battery completely before using the terminalFor safety reasons, the battery that is delivered with your YOMOVA is not fully charged. A complete charging cycle takes approximately 3 hours, and the display indicates when the battery is fully charged.•to get the best performance from the battery, make sure it is at room temperature (20°C) when operating the YOMOVA1. Remove the card/battery cover, if necessary; see Figure 7. Removing the card/battery cover, on page 8.2. Lower the battery into its recess.Position the battery with the label facing upwards and the battery contacts facing forwards. Take care not to touch the battery contacts of the YOMOVA.Figure 14. Inserting the battery3. Make sure that the battery contacts touch the contacts in the YOMOVA, then press the battery down until it fits in position.
public 13ymvP_install.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manualFigure 15. Clicking battery in place4. Position the card/battery cover on the YOMOVA, then slide it forwards until you hear a click.Figure 16. Closing the battery coverIf you want to use a YOMOVA with the mains adaptor, you must remove the battery before connecting the adaptor.5. Press the Corr key to power up the terminal.
YOMOVA portable owner manual14  publiclast updated 7/10/16 document release 2.1 ymvP_install.fmCharging the batteryThe terminal will only run if there is at least a minimum charge in the battery. To charge the battery:1. Connect the power cable from the charger to the input socket on the left side of the terminal.2. Connect the charger to the mains.Figure 17. Connecting the battery chargerA complete charge cycle normally takes around three hours. The display shows the charge level of the battery.369.OK2580Corr147StopMenu
public 15ymvP_install.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manualPowering a YOMOVA with the mains adaptorThe portable YOMOVA is normally powered by a battery, which can be recharged without removing it from the terminal. After removing the battery, you can use the mains adaptor to power the terminal. The mains adaptor must be ordered separately. It is not provided as standard with the YOMOVA terminal.1. Open the card/battery cover, remove the battery and close the cover.The battery must be removed before you connect the mains adaptor, to avoid damaging the battery.2. Open the connector compartment.Figure 18. Removing connector compartment cover!21
YOMOVA portable owner manual16  publiclast updated 7/10/16 document release 2.1 ymvP_install.fm3. Connect the power cable from the mains adaptor to the power input socket.Figure 19. Power input socket underneath terminalThe terminal powers up as soon as the mains adaptor is connected.4. Close the connector compartment.Figure 20. Closing the connector compartment
public 17ymvP_using.fm document release 2.1 last updated 7/10/16Using the YOMOVA portableThe YOMOVA portable reads chip cards, magstripe cards and contactless devices, and includes a built-in printer.Security recommendationsFor security reasons, you are advised to check your YOMOVA every working day. Make sure that:•there is no sign of unusual cables connected anywhere on the terminal•there is no foreign object in either of the card-readers•the keypad is firmly in place•the terminal is not displaying any warning message•the housing is not visibly damaged•the terminal serial number (on the label) corresponds to the inventoryIn the tampered state, the device displays a warning message and it is not possible to use the terminal to make a payment. When a warning message is displayed:1. remove the terminal from service2. contact the supplier immediately, who may then report the problem to Worldline3. keep the terminal available for possible forensic investigationReading a chip cardInsert the card in the slot at the front of the YOMOVA with the chip facing upwards.
YOMOVA portable owner manual18  publiclast updated 7/10/16 document release 2.1 ymvP_using.fmFigure 21. Reading a chip cardReading a magstripe card1. Swipe the card through the reader at the right-hand side of the YOMOVA in one smooth movement.Hold the card with the magnetic stripe at the bottom. You can slide the card in either direction.Figure 22. Reading a magstripe card369.OK2580Corr147StopMenu369.OK2580Corr147StopMenu
public 19ymvP_using.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manualReading a contactless card/deviceWhen the payment application supports contactless cards/devices, the landing-point symbol appears on the display.1. Hold the card/device above the display, centered on the landing point.The first LEDs above the display is lit when the terminal is ready for a contactless transaction; the other LEDs show the progress of the transaction, as defined by the application.Figure 23. Reading a smart card with the contactless readerResetting the YOMOVA – Reset buttonIf the YOMOVA stops responding, you can use the Reset button.The button is located on the back of the YOMOVA just above the battery cover. Use a small object to push it in for one second, then wait for the YOMOVA to restart.369.OK2580Corr147StopMenu
YOMOVA portable owner manual20 empty for double-sided printing ymvP_using.fmFigure 24. Reset button on YOMOVAYou can also reset the YOMOVA by using the keyboard or by removing the battery.Resetting the YOMOVA – keyboardTo reset the YOMOVA, press the yellow Corr button for at least 5 seconds and wait for the terminal to reboot.Resetting the YOMOVA – remove the battery1. Remove battery.2. Wait for YOMOVA to power down completely.3. Replace battery.4. Press the “Corr” key to restart the YOMOVA.Power offTo power off the YOMOVA portable, press the red Stop button and hold it down for five seconds. This function is useful when, for example, you will not be using YOMOVA for more than a few days without connecting the charger. You can also power off the YOMOVA by removing the battery.The terminal can also be powered down automatically, under software control.
public 21ymvP_battery.fm document release 2.1 last updated 7/10/16Caring for the batteryWhen not in use, the YOMOVA portable remains in a sleep (stand-by) mode and continues slowly discharging the battery. You can either:•charge the battery regularly, as described in Charging the battery, on page 14•remove the battery and power off the terminal completelyWhen you will not be using the YOMOVA for more than a week, first make sure the battery is around 40% charged – check the charge-level indicator on the display. You then have two options:•remove the battery and store it separately to keep it in optimal condition•leave the battery in the YOMOVA and connect the chargerA Li-Ion battery normally delivers peak performance for around three years after it is built or until it has been recharged 500 times. After this, it may need charging more frequently. Depending on how intensively the battery is used, and on how often it is charged/the average charge level, it can continue to deliver acceptable performance for another three years.When you need to replace a Li-Ion battery, do not throw the used battery away with household waste. Use an appropriate recycling channel, or return the used battery to your vendor.Removing the battery1. Remove the card/battery cover underneath the YOMOVA.Press with your thumb on the top of the card/battery cover to release it, then slide the cover backwards.Figure 25. Removing card/battery cover21
YOMOVA portable owner manual22  publiclast updated 7/10/16 document release 2.1 ymvP_battery.fm2. Lift the battery out of the YOMOVA.Never use a sharp or pointed object when removing the battery, because this may damage the YOMOVAFigure 26. Removing the battery3. Replace the card/battery coverBattery monitoringA “fuel gauge mechanism” is used for the Li-ion battery in the YOMOVA. This mechanism monitors different battery parameters, such as voltage, current, temperature and the residual capacity.The fuel gauge auto-calibrates itself each time the battery is recharged, to avoid the “digital memory” effect and maintain accuracy.The fuel gauge remembers the capacity of the battery after each charging cycle. Inserting another battery in the terminal may not give an accurate indication until after the next charge cycle has completed.
public 23ymvP_maintenance.fm document release 2.1 last updated 7/10/16Maintaining the YOMOVA portableMaintenance for the YOMOVA is limited to cleaning the case and the card readers.Never attempt to dismantle the YOMOVA or force open the case. If the terminal needs servicing, contact Worldline or your vendor.Cleaning the YOMOVADo not allow water to enter the terminal. Use only a damp cloth.For optimal functioning, the YOMOVA should be kept clean and cleaned regularly. When cleaning your equipment:1. Disconnect the terminal from the mains adaptor or battery charger.2. Clean the equipment with a soft damp cleaning cloth.3. Clean the display with a soft dry anti-static cleaning cloth.After cleaning, do not forget to re-connect the equipment.Do not use detergents, solvents or alcohol. These products may damage the surface of the terminal and make transparent parts opaque. Make sure that dirt does not enter the card readers.!
YOMOVA portable owner manual24  publiclast updated 7/10/16 document release 2.1 ymvP_maintenance.fmCleaning the card readersDo not allow water to enter the card readers. Use only a damp cloth.The chip-card reader and the magstripe-card reader should be cleaned regularly, using the appropriate cleaning cards.•cleaning-cards can be used more than once, as long as you swipe or insert a clean edge each time•“wet” cleaning-cards must be used as soon as you open the sachetFigure 27. Cleaning the card-readers•for the magstripe-card reader, swipe the cleaning card slowly through the reader three times in each direction, without turning the card round•for the chip-card reader, insert and remove the cleaning card three times without turning the card roundContact your vendor for information about specific types of cleaning card, such as “damp” cleaning cards from a specialised supplier such as ECS.!369.OK2580Corr147StopMenu369.OK2580Corr147StopMenu
public 25ymvP_troubleshooting.fm document release 2.1 last updated 7/10/16Appendix A. TroubleshootingIf problems persist, contact your vendor. Check that installation/maintenance operations are performed by a trusted person. Log all maintenance operations, including the name of the operator.Warning message displayedIn the tampered state, the YOMOVA displays a warning message and it is not possible to use the terminal to make a payment. When a warning message is displayed:1. take the terminal out of service2. contact the supplier immediately, who may then report the problem to Worldline3. keep the terminal available for possible forensic investigationDisplay not workingThe YOMOVA might be in sleep mode or off: press “corr/on” to power upCheck battery status; see Battery monitoring, on page 22Make sure the battery is inserted correctly. If the battery is inserted and the terminal is not starting, the battery is most likely “flat”. Connect the power supply to power up. The power supply will need to charge the battery to a minimum level before the terminal effectively starts up. This can take a few minutes.When the terminal starts, keep the terminal powered to charge the battery completely.YOMOVA reboots unexpectedlyWith very low battery it is possible that when the terminal needs more power (printing, 3G connection) the terminal will reboot. Wait at least 10 minutes before starting a transaction.If the terminal reboots while printing, open the printer cover and wait for at least 10 minutes before closing the printer and resume printing.YOMOVA display working, but equipment does not respond to key pressesPress the reset button and wait for the equipment to reboot.Disconnect and reconnect the power supply.Take the battery out and put it back in; see Removing the battery, on page 21YOMOVA cannot make 3G/WiFi/Bluetooth connectionCheck that the antenna is connected to the interface board.For 3G, make sure that there is enough coverage; this may be indicated in the status bar on the display.
YOMOVA portable owner manual26  publiclast updated 7/10/16 document release 2.1 ymvP_troubleshooting.fmFor WiFi/Bluetooth:– make sure all components of the network are operational; the connection status may be indicated in the status bar on the display– check the WiFi access point or BT device, and reconnect as instructed by your vendorFor WiFi, if the connection to the access point is established but the terminal cannot connect, there may be a problem:– with the Ethernet host connection address: check with your terminal vendor– with the firewall/router settings of your Ethernet infrastructure: check with your IT supportYOMOVA cannot read cardsMake sure you swipe or insert the card correctly.Check the card for damage, and try another card to determine whether or not the problem is caused by a defective card.Clean the card readers with a cleaning card.If your payment application allows it, try to complete the transaction manually using the keypad instead of the card reader. After the manual transaction has been completed, contact your vendor to have your terminal repaired or replaced.Printer does not workOpen the printer cover and check whether there is enough paper.Check that the printer cover is properly closed.Check that the paper is inserted correctly.Check if there is a paper jam: remove the paper roll, carefully cut the damaged paper from the roll and replace the roll.Connection with ePOS equipment/PC through USB does not functionCheck the cables between the YOMOVA and the ePOSCheck the connection settings on the YOMOVA, as described by your vendor.
public 27ymvP_safety.fm document release 2.1 last updated 7/10/16Appendix B. Operating your YOMOVA portable safelyThe YOMOVA is a payment terminal and is not to be used for any other purposes. Worldline declines any liability if the instructions and precautions contained in this manual are not observed.Operating conditionsThe YOMOVA can be used at an operating temperature between -10°C and +50°C, and between 20% and 95% RH, non-condensing. Note, though, that the optimum operating temperature for the battery is between 15°C and 25°C. Handle your YOMOVA with care: there is no warranty against breakage. Avoid exposing the YOMOVA (and its battery) to:•shocks and vibrations•excessive heat and dust, including direct sunlight or objects that radiate heat•explosive, corrosive or otherwise hostile environments•oil, water, moisture or condensation•electric motors, high-frequency devices (for example, microwave ovens and induction hobs) and other equipment that can cause excessive voltage fluctuations and/or electromagnetic fields•Electronic Article Surveillance (EAS) gatesEAS gates are commonly placed at store exits, to identify potentially stolen items as customers leave the store. Make sure the YOMOVA is at least 20 cm from any high-frequency (8 MHz and above) EAS gates, and at least 80 cm from any low-frequency gatesDo not:•store your YOMOVA or its battery in refrigerators, defrosting systems or microwaves•treat your YOMOVA or its battery with a hairdryer or any high pressure cleaning equipment•put any heavy equipment on top of your YOMOVA or its battery or squeeze them•store your YOMOVA with food or any consumable goodsElectrical installationsThe YOMOVA operates safely when used according to its marked electrical ratings and product usage instructions. To ensure the safe operation of the YOMOVA, use it only in premises that have electrical installations in compliance with local and regional office and residential electrical wiring codes.!
public 28ymvP_safety.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manualPower supply / battery•only use the battery that is supplied with your YOMOVA portable•only use the power adaptor that is supplied with your YOMOVA to charge the battery–check regularly that there is no overheating of the power adaptor.–disconnect the power adaptor when you want to clean the terminal housing or the display and when the YOMOVA needs servicing or repair.–never use extension cables for the DC outlet of the power adaptor.•use the battery only for its intended purposeKeep the battery out of reach of children. The battery may explode if damaged or exposed to fire or high temperatures.•do not dismantle the battery; do not solder directly on to the battery•avoid leaving the battery in cold or hot places, such as in a closed car in winter or summer conditionsBattery temperature has an influence on the autonomy of the YOMOVA portable. When the operating temperature drops below freezing point, the battery will need charging more frequently•avoid carrying batteries in conditions that may cause a short-circuit between battery contacts, for example in a pocket with coins or other metal objects•stop using the terminal immediately if the battery emits an unusual smell, feels hot, changes colour or shape, or appears abnormal in any wayPrinter and paperImpact, friction, temperature, humidity, light, and oil affect the colouring and storage characteristic of thermal printer paper. Do not load paper rolls that have folds, wrinkles, tears, or holes. Do not pull paper out of the printer; this could damage the feed mechanism. Only use Worldline-approved paper.Wireless interferenceYour YOMOVA portable is equipped with a GSM/GPRS interface that uses low power radio frequencies (RF) for its communication. Most electronic equipment, for example in hospitals and motor vehicles, is shielded from radio frequencies. Beware, however, that radio frequencies might affect damaged or improperly shielded equipment. Always switch your YOMOVA off in areas that instruct you to, for example when entering health care facilities or when boarding an aircraft.
public 29ymvP_safety.fm document release 2.1 last updated 7/10/16YOMOVA portable owner manualOpening the terminal•Only open the YOMOVA terminal for adjustments that are described in this manual. Never remove or open any part that is not described in this manual.•When opening the YOMOVA terminal take the necessary precautions to avoid electrostatic discharge (ESD). An electrostatic charge can build up on the human body and then be discharged when you touch a circuit board. ESD can damage equipment and impair electrical circuitry. To minimize the risk, always follow these guidelines when removing and replacing SIM or SAM cards or connecting the YOMOVA to external equipment.:–ground (earth) yourself by holding the YOMOVA and touching a metal surface on the ground.For example, if your computer has a metal case and is plugged into a standard grounded (earthed) outlet, then touching the case should discharge the ESD on your body–make sure not to wear any clothing that conducts a lot of electrical charge, such as a woollen sweater–unless absolutely necessary, avoid working on the YOMOVA during a thunderstorm–remove all jewelleryServicingAll servicing other than the actions described in this manual must by performed by Worldline or an approved service centre.
YOMOVA portable owner manual30 empty for double-sided printing ymvP_safety.fm
public 31ymv_certifications.fm document release 2.1 last updated 7/10/16Appendix C. ApprovalsAny changes or modifications not expressly approved by Worldline could make official certification void.CE certification / R&TTEWorldline declares that the YOMOVA portable complies with the R&TTE directive1999/5/EC on radio equipment and telecommunications terminal equipment intended to be connected to public telecommunications networks.The declaration of conformity (DoC) can be consulted on the website terminals.worldline.com. FCC rules – class AThis equipment has been tested and found to comply with the limits for Class A and Class B digital devices, pursuant to Part 15 of the FCC Rules. For more information on these rules, see the FCC web site.!
YOMOVA portable owner manual32 empty for double-sided printing ymv_certifications.fm
PUBLIC 33ymvP_decommission.fm document release 2.1 last updated 7/10/16YOMANI terminalsOWNER MANUALAppendix D. Decommissioning a YOMOVAWhen a YOMOVA or any of its accessories is at the end of its life, it must not be simply thrown away, given away or sold it. Remember that:•security awareness requires erasing cryptographic components securely and completely•sustainability requires recycling as many components as possible•environmental awareness requires disposing of hazardous materials professionallyReturn the YOMOVA to your vendor for decommissioning.Step by step1. Inspect the terminal for completeness, signs of intrusion and tampering, as explained under Security recommendations, on page 17.If you find any evidence of tampering, report the problem to Worldline and keep the terminal available for possible forensic investigation.2. If you do not find any evidence of tampering, dispose of the terminal following local rules and regulations for disposal of electronic equipment, such as WEEE. Make sure that the person or organisation responsible effectively destroys the terminal and its components.3. Log the physical disposal of the terminal in the assets register.
YOMANI terminalsOWNER MANUAL34 – empty for double-sided printing –  ymvP_decommission.fm

Navigation menu