Wilson Electronics 806WV iDen in Car Amplifier User Manual BD800NM M 022603 13 R1

Wilson Electronics, LLC iDen in Car Amplifier BD800NM M 022603 13 R1

users manual

Rev 1 MODEL: BD800NM PART#: 804002 IDEN MOBIL Bi-Directional Amplifier for In Vehicle Installation Guide The information provided by Wilson Electronics, Inc. is believed to be complete and accurate. However, no responsibility is assumed by Wilson Electronics, Inc. for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use. FCC ID: PWO806WV Copyright © 2002 Wilson Electronics, Inc. IC: 4726A-806WV 3301 E. Deseret Drive St. George, Utah 84790 wilsonelectronics.com tech@wilsonelectronics.com Phone 1-866-294-1660 Fax 1-435-656-2432
Rev 1 PAGE 2 TABLE OF CONTENTS 1. PACKAGE CONTENTS.……………………………….………page 3 2. ANTENNA OPTIONS...…………………………………………page 3 3. PURPOSE OF THE IDEN……………………………..…...……page 4 4. HOW THE IDEN FUNCTIONS………………..…………..……page 4 5. FEATURES……………………………………………….…..…page 4 6. AMPLIFIER SPECIFICATIONS……………………………… page 4 7. AMPLIFIER INSTALLATION…………………………... page 5 & 6 8. TECH SUPPORT…………………………………..……………page 6 9. NOTES & WARNINGS……………………………...…….……page 6
Rev 1 PAGE 3
Rev 1 PAGE 4 1. PURPOSE OF THE IDEN The IDEN Bi-Directional Amplifier greatly improves RF coverage for areas in which low signal strength or no signal is a problem when using your portable iDEN phone inside the car. 2. HOW THE IDEN FUNCTIONS The signal is received by the outside antenna from the cell site. It is then AMPLIFIED/REPEATED and transmitted to your iDEN phone through the inside antenna. When the phone transmits it is received by the inside antenna. It is then AMPLIFIED/REPEATED and transmitted to the cell site through the outside antenna. 3. FEATURES Wireless Operation - No Physical Connection to Cellphone The IDEN Amplifier greatly improves signal strength inside a vehicle without a physical connection to your phone. It also allows multiple phones to be used simultaneously. Advanced Electronics Receive & Transmit Better Than Your Cellphone The Wilson Cellular Amplifier has a better receiver than what's in your cellphone. Its advanced electronics are very sensitive and able to receive small signals that would go undetected by most cellphones. It also has a better transmitter with double the power of your cellphone. This allows your voice to be heard by distant cell sites, increasing coverage up to 50 miles or more. 4. AMPLIFIER SPECIFICATIONS Frequency…….……………...806-821 MHz Uplink 851-866 MHz Downlink Gain………………………….37dB Uplink 37dB Downlink Flatness………………………+/- 3dB Uplink +/- 3dB Downlink Max RF Output Power……….+31dBm Uplink +15dBm Downlink Noise Figure………………….5dB Uplink 5dB Downlink Uplink Downlink Isolation...…More than 90dB Power Consumption………….12V, 1.5A Connecter……………………..FME-Male 50 Ohms Dimensions…………………..5.5 x 4.3 x 1.4 (inches) OR 14.0 x 10.8 x 3.5 (cm) Weight…………………….….1.32 pounds or 600 grams Model #………………………IDEN Part #…………………….…... 804002
Rev 1 PAGE 5 5. AMPLIFIER INSTALLATION (REFER TO ILLUSTRATION) ILLUSTRATION 5.1 Mounting the Amplifier 5.1.1 Mount the AMPLIFIER under the dash or car seat. NOTE: The amplifier should be mounted to the selected location using mounting screws. (Mounting screws not included.) 5.2 Installing the Outside Antenna (Sold Separately) 5.2.1 Select an outside mounting location. For best performance try to keep the antenna centered on the car’s / truck’s roof. 5.2.2 The outside antenna should be located in an area with at least a 12” radius clear of obstructions, and other radiating elements. NOTE: When using a magnet mount, NMO or trucker antenna, keep the separation distance between the inside and outside antennas at least 4ft. When using a glass mount antenna, keep the separation distance between the inside and outside antennas at least 5ft. WARNING: The outside antenna used with this amplifier must be mounted with a separation distance of at least 10 inches(25cm) from all persons and must not be co-located or operating in conjunction with any other antenna or amplifier. 5.2.3 Connect the Outside Antenna to the AMPLIFIER/ side labeled “OUTSIDE ANTENNA”.
Rev 1 PAGE 6 5.3 Installing the Inside Antenna (Included) 5.3.1 Connect the Inside Antenna to the side labeled “INSIDE ANTENNA” on the AMPLIFIER. 5.3.2 The Inside Antenna should be centered in the vehicle. It can be placed in the seat back between the seat cushion and fabric or in the vehicle headliner. WARNING: The inside antenna used with this amplifier must be mounted with a separation distance of at least 8 inches(20cm) from all persons and must not be co-located or operating in conjunction with any other antenna or amplifier. 5.4 Connect the 12V Power Supply 5.4.1 Connect the large end of the 12V Power Supply into your cigarette lighter and the other end into the input on your amplifier labeled “DC 12V IN”. 7. TECH SUPPORT If you need further assistance with your installation please call us Toll-Free at 866-294-1660 or send an E-mail to tech@wilsonelectronics.com Our Hours of Operation are: 8:00 AM – 4:30 PM (Mountain Time) 8. NOTES & WARNINGS NOTE: When using a magnet mount, NMO or trucker antenna, keep the separation distance between the inside and outside antennas at least 4ft. When using a glass mount antenna, keep the separation distance between the inside and outside antennas at least 5ft. WARNING: The outside antenna used with this amplifier must be mounted with a separation distance of at least 8 inches(20cm) from all persons and must not be co-located or operating in conjunction with any other antenna or amplifier. WARNING: The inside antenna used with this amplifier must be mounted with a separation distance of at least 10 inches(25cm) from all persons and must not be co-located or operating in conjunction with any other antenna or amplifier.

Navigation menu