Wasp Barcode Technologies WDT92 WDT92 - Rugged Mobile Computer with bar code reader User Manual wdt92 ra

Wasp Barcode Technologies WDT92 - Rugged Mobile Computer with bar code reader wdt92 ra

Users Manual

Wasp Barcode Technologies1400 10th StreetPlano, TX 75074Telephone: 866-547-9277Fax: 214-547-4101©2018 Wasp Barcode Technologies. • ALL RIGHTS RESERVED. •An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures describedtherein may be reproduced or transmitted in any form or by any means without prior written permission of WaspBarcode Technologies or its subsidiaries or affiliates ("Wasp"). Owners of Wasp products are hereby granted a non-exclusive, revocablelicense to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchasershall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shallensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual bepublished, you can acquire printed versions by contacting your Wasp representative.Electronic versions may either be downloadable from the Wasp Barcode Technologies website (www.waspbarcode.com)or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this orother Wasp publications, please let us know via the "Contact" page.DisclaimerWasp Barcode Technologies ("Wasp") reserves all rights with respect to its trademarks, service marks, logos, and otherindicia ("Marks"). Any unauthorized use of any Wasp-owned Mark, or any use of a mark that is confusingly similar to, orlikely to cause confusion with, an Wasp-owned Mark, would constitute infringement of Wasp’s exclusive trademarkrights.Logo of Wasp and Wasp "bug" are registered trademarks.WDT92 is a registered trademark of Wasp Barcode Technologies.All other brand and product names mentioned herein are for identification purposes only and may be trademarks orregistered trademarks of their respective owners.PatentsSee the Safety & Regulatory Addendum for patent list.WDT92 - 2D ImagerThis product is covered by one or more of the following patents:Design patents: EP001942723, EP002421560, USD676850, USD677663, USD697067, USD704711, USD737822, USD779491,ZL201230127985.6, ZL201230128017.7, ZL201430286638.7 Utility patents: EP0999514B1, EP0996284B1, EP1128315B1, EP1172756B1, EP1396811B1, EP1413971B1, EP1804089B1,EP2315156B1, EP2517148B1, EP2649555B1, IT1396943, JP4435343B2, JP5192390B2, US6412698, US6415978,US6512218, US6808114, US6877664, US6997385, US7053954, US7234641, US7387246, US8113430, US8888003,US8915443, ZL200680050007.8, ZL200980163411.X.WDT92 - 1D ImagerThis product is covered by one or more of the following patents:Design patents: EP001942723, EP002696088, USD676850, USD677663, USD697067, USD704711, ZL201230127985.6,ZL201230128017.7, ZL201530439997.6Utility patents: EP1128315B1, EP1396811B1, EP1413971B1, EP1797521B1, EP2517148B1, EP2649555B1, IT1396943,US6098883, US6412698, US6415978, US6808114, US6997385, US7387246, US7506816, US8888003, US8915443,ZL200980163411.X. Cleaning The DevicePeriodically clean the WDT92 device using a soft cloth slightly dampened with only water or Isopropyl Alcohol (70%).Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, solvents) or abrasive pads toclean the device. WDT92Rugged Mobile Computer with 1D/2D ImagerSafety & Regulatory Addendum 852001240 (Rev. A) September 2018General Safety RulesPower SupplyThe device is intended to be supplied by a self-contained rechargeable Lithium Ion battery pack(UL listed LPS/SELV power source) and/or by UL Listed/CSA Certified Power Unit LPS/SELVpower source which supplies power directly to the unit via the micro USB connector of the cable.The device could be also used with Certified Accessories (Dock/Cradle). The Dock/Cradleaccessories are intended to be supplied by a UL Listed/CSA Certified Power Unit LPS/SELV whichsupplies power via the power connector of the cable. Any changes or modifications to equipment, not expressly approved by Wasp could void theuser's authority to operate the equipment.Battery InformationBy default, the main battery pack is disconnected at the factory to avoid damage due toexcessive draining.The rechargeable battery pack is less than half of full charge when delivered. Charge the batterypack as indicated in the Quick Start Guide or in the User Manual, before using the WDT92terminal.The battery pack autonomy varies according to many factors, such as the frequency of barcodescanning, RF usage, battery life, storage, environmental conditions, etc.Close to the limits of the working temperature, some battery performance degradation mayoccur.The WDT92 should be charged at an ambient temperature between 0 - 35º C (32 to 95 ºF) toachieve the maximum charging rate. Never charge the device battery in a closed space where excessive heat can build up. As a safety precaution, the battery may stop charging to avoid overheating.The WDT92 may get warm during charging; this is normal and does not mean a malfunction. Even if the storage temperature range is wider, it is recommended to store the terminal and thebatteries at environmental temperature, in order to achieve the longest battery life.Battery Safety GuidelinesNOTERead carefully the WDT92 user manual (available at www.waspbarcode.com) beforeperforming any type of connection to the WDT92.The user is responsible for any damage caused by incorrect use of the equipment or byinobservance of the indication supplied in the user manual.CAUTION• Before using the devices and the battery packs, read this Addendum carefully.• Use only the components and accessories supplied by the manufacturer forthe specific WDT92 being used.• Do not attempt to disassemble the WDT92 device, as it does not contain partsthat can be repaired by the user. Any tampering will invalidate the warranty.• When replacing the battery pack or at the end of the operative life of the• WDT92 device, disposal must be performed in compliance with the laws inforce in your jurisdiction. • Do not submerge the WDT92 in liquid products.• For further information or support, refer to the Wasp web site:www.waspbarcode.com. CAUTIONDo not incinerate, disassemble, short terminals, or expose to high temperature. Risk of fire andexplosion. Use specified charger only. Risk of explosion if the battery is replaced by an incorrecttype. Dispose of batteries as required by local authorities.CAUTIONAvoid storing batteries for long periods in a state of full charge or very low charge.We recommend charging the battery pack every two to three months to keep its charge at amoderate level to maximize battery life.Annual replacement of rechargeable battery pack avoids possible risks or abnormalities andensures maximum performance.WARNINGUse only Wasp approved batteries and accessories for battery charging.Risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructions.Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.Mettre au rebut les batteris usagées confor mément aux instructions.WARNINGInstalling, charging and/or any other action should be done by authorized personnel andfollowing this manual.The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed toabusive conditions.If the battery pack is replaced with an improper type, there is risk of explosion.Do not place the battery pack in or near a fire or other heat source; do not place the batterypack in direct sunlight, or use or store the battery pack inside unventilated areas in hotweather; do not place the battery pack in microwave ovens, in clothes dryers, in high pressurecontainers, on induction cook surfaces or similar devices. Doing so may cause the battery packto generate heat, explode or ignite. Using the battery pack in this manner may also result in aloss of performance and a shortened life expectancy.To power the cradle, use only a Wasp approved power supply. The use of an alternative powersupply will void the product warranty, may cause product damage and may cause heat, anexplosion, or fire.The area in which the units are charged should be clear of debris and combustible materials orchemicals.Do not use the battery pack of this terminal to power devices other than this device.Immediately discontinue use of the battery pack if, while using, charging or storing the batterypack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appearsabnormal in any other way.Do not short-circuit the battery pack contacts connecting the positive terminal and negativeterminal. This might happen, for example, when you carry a spare battery pack in your pocketor purse; accidental short–circuiting can occur when a metallic object such as a coin, clip, orpen causes direct connection of the contacts of the battery pack (these look like metal stripson the battery pack). Short–circuiting the terminals may damage the battery pack or theconnecting object.Do not apply voltages to the battery pack contacts.Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwisesubject it to strong impacts, pressures, or shocks.Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery packcontains safety and protection devices, which, if damaged, may cause the battery pack togenerate heat, explode or ignite.Wireless and Radio Frequencies WarningsLaser SafetyThe following information applies to Laser Aiming System, used on WDT92 variants with 2Dimager.The laser light is visible to the human eye and is emitted from the window indicated in the figurebelow.LASER LIGHT - DO NOT STARE INTO BEAMCLASS 2 LASER PRODUCTMAX OUTPUT RADIATION 1 mWCOMPLIANT WITH EN 60825-1 (2007) and EN 60825-1 (2014)WARNINGIn case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If thecontact occurs, immediately wash the affected area with water and consult a doctor.Do not solder directly onto the battery pack.Do not expose the battery pack to liquids.Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially ona hard surface, you should take it to the nearest Authorised Repair Centre for inspectionbefore continuing to use it.If your device stops working for any reason, do not use its battery on other electronic deviceswithout a prior check and approval by an Authorised Repair Centre.Do not replace the battery pack when the device is turned on.Do not remove or damage the battery pack’s label.Do not use the battery pack if it is damaged in any part.Battery pack usage by children should be supervised.Collect and recycle waste batteries separately from the device in compliance with EuropeanDirective 2006/66/EC, 2011/65, 2002/96/EC and subsequent modifications, with US andChina regulatory laws and regulations about the environment.WARNINGUse only the supplied or an approved replacement antenna. Unauthorized antennas,modifications or attachments could damage the product and may violate laws andregulations.Most modern electronic equipment is shielded from RF signals. However, certain electronicequipment may not be shielded against the RF signals generated by WDT92.Wasp recommends persons with pacemakers or other medical devices to follow the samerecommendations provided by Health Industry Manufacturers Associations for mobilephones.Persons with pacemakers:• Should ALWAYS keep this device more than twenty five (25) cm from theirpacemaker and/or any other medical device;• Should not carry this device in a breast pocket;• Should keep the device at the opposite side of the pacemaker and/or any othermedical device;• Should turn this device OFF or move it immediately AWAY if there is anyreason to suspect that interference is taking place.• Should ALWAYS read pacemaker or any other medical device guides or shouldconsult the manufacturer of the medical device to determine if it is adequatelyshielded from external RF energy.In case of doubt concerning the use of wireless devices with an implanted medical device,contact your doctor.Turn this device OFF in health care facilities when any regulations posted in these areasinstruct you to do so. Hospitals or health care facilities may use equipment that could besensitive to external RF energy.RF signals may affect improperly installed or inadequately shielded electronic systems inmotor vehicles. Check with the manufacturer or its representative regarding your vehicle. Youshould also consult the manufacturer of any equipment that has been added to your vehicle.An air bag inflates with great force. DO NOT place objects, including either installed or portablewireless equipment, in the area over the air bag or in the air bag deployment area. If avehicle’s wireless equipment is improperly installed and the air bag inflates, serious injurycould result.Turn off the device when in any area with a potentially explosive atmosphere. Observerestrictions and follow closely any laws, regulations, warnings and best practices on the useof radio equipment near fuel storage areas or fuel distribution areas, chemical plants or whereany operation involves use of explosive materials.Do not store or carry flammable liquids, explosive gases or materials with the device or itsparts or accessories.Areas with a potentially explosive atmosphere are often, but not always, clearly marked orshown.Sparks in such areas could cause an explosion or fire, resulting in injury or even death.NOTEThe artwork below may be only a draft. Please refer to the label attached to the product forinformation about certification marks.Laser Warning LabelPrinted Data LabelMarks LabelScan WindowThis document is an addendum to the QuickStart Guide (QSG) for this product. See the QSGfor additional product information.©2018 Wasp Barcode Technologies. All rights reserved.Logo of Wasp and Wasp "bug" are registeredtrademarks.www.waspbarcode.com
">

Navigation menu