WIRELESS TAG TECHNOLOGY WT8266 WT8266 Module User Manual Addendum

WIRELESS-TAG TECHNOLOGY CO., LIMITED WT8266 Module Addendum

Contents

Addendum

OEM INTEGRATION INSTRUCTIONS: (additional information)This device is intended only for OEM integrators under the following conditions: Themodule must be installed in the host equipment such that 20 cm is maintained betweenthe antenna and users, and the transmitter module may not be co-located with any othertransmitter or antenna. The module shall be only used with the external antenna(s) thathas been originally tested and certified with this module. As long as 3 conditions aboveare met, further transmitter test will not be required. However, the OEM integrator is stillresponsible for testing their end-product for any additional compliance requirementsrequired with this module installed (for example, digital device emissions, PC peripheralrequirements, etc.).Validity of using the module certification:In the event that these conditions cannot be met (for example certain laptop configurationsor co-location with another transmitter), then the FCC authorization for this module incombination with the host equipment is no longer considered valid and the FCC ID of themodule cannot be used on the final product. In these circumstances, the OEM integratorwill be responsible for re-evaluating the end product (including the transmitter) andobtaining a separate FCC authorization.Information that must be placed in the end user manual: The OEM integrator has tobe aware not to provide information to the end user regarding how to install or remove thisRF module in the user's manual of the end product which integrates this module. The enduser manual shall include all required regulatory information/warning as show in thismanual.This host device must be kept away from all persons by 20cm or more and installations usingless distance, or installations using antennas with gain greater than that with which thiswas Certified will require additional approvals.

Navigation menu