WENZHOU MTLC ELECTRIC APPLIANCES WF15S On/Off Switch User Manual

WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD. On/Off Switch Users Manual

Users Manual

INSTALLATION INSTRUCTIONS -02- -03--01- DESCRIPTION FEATURES WF15SOn/Off Switch  SPECIFICATIONS INSTALLATIONSingle Switch Wiring SchematicWiring Diagram:WARNINGS AND CAUTIONS6. Check connections to be sure they are tight and no bare conductors are exposed.7. Insert the WF15S switch into the standard outlet box carefully.8. Make sure the WF15S switch to the box using the supplied screws.9. Attach the wall plate.10. Restore power at the circuit breaker and test the system.White (Neutral)Red(Load)WF15SGreen (Ground)Black (Line/Hot)Wireless Home Automation Control Device OPERATIONS Manual ControlThe switch paddle on the WF15S allows the user to:1, Turn ON/OFF the connected lighting.1, To turn the connected lighting ON: Tap the top of the switch paddle.2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.Perfect Replacement for regular wall switch, 120VAC, 15Amp Manual and Remote ON/OFF control of any connected lighting and other electricalelectrical loadThe WF15S ON/OFF Switch is a perfect wireless manual and remote on/off controlreplacement of regular wall switch, controlling incandescent, LED, fluorescent, ballastand so on. 4. Disconnect the wiring from the existing switch.5. Connect this WF15S switch as shown in the wiring diagram: Black lead to hot wire,white lead to neutral wire, red lead to load wire, green lead to ground wire.1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuitbreaker or fuse and test that power is off before wiring.2. Remove wall plate and existing switch mounting screws.3. Carefully remove the existing switch from the switch box. GroundGreenWhiteNeutralRedLoad (to light fixture)BlackHot (from breaker)LED LightSwitch PaddleSupply Connection.....................................14 AWG wires, suitable for at least 75°CWire Strip Length.................................................................................16mm(5/8 in.)Screw Torque................................................................................................20 lbf-inInterchangeable Face CoverInterchangeable Color Face PlateTo replace the face cover, just use a flat screwdriver to pry-off the interchangeable plate.Voltage.............................................................................................. 120VAC, 60HzIncandescent..................................................................................................1000WResistive................................................................................................1800W(15A)Motor.............................................................................................................. 1/2 HPStandard Ballast............................................................................................1200VAElectronic Ballast...................................................................................................5AOperating Temperature.........................................................32°F~104°F(0°C~40°C)Protocol.........................................................................................IEEE 802.11b/g/nWireless Type.............................................................................................. 2.4GHzBe sure to read the instruction carefully before installation, and the manufacturer will not be responsible for any product damage that does not follow the instruction1. Wet hands are strictly prohibited.2. Must work strictly according to the rated load.3. Do not continue to work after self-disassembly of any nature and damage of external forces.You can Turns your devices on or off at any time or anywhere have Internet usingthe free Tuya App on your smartphone After a power failure, the WF15S on/off switch returns to OFF state.Please Note:Tuya Smart App Control1. Download Tuya Smart app from the App Store or Google Play.2. Connect mobile device to your 2.4GHz WIFI network. Please note thisSmart outlet can only be connected to 2.4GHz network.a. Login the Tuya b. Click the button “+” c. Select the "Electrical outlet"3. Launch Tuya and follow the in-app instructions to connect the WIFI outlet to your network.d. Click the bottom button e. Enter your Wifi password f. Finished
-05--04-  WARRANTY INFORMATIONOur company warranties its products to be free of defects in materials and workman-ship for a period of two (2) years. There are no obligations or liabilities on the part use or performance of this product or other indirect damages with respect to lossof property, revenue, or profit, or cost of removal, installation or reinstallation.of our company for consequential damages arising out of or in connection with theJun, 2018INSTALLATION INSTRUCTIONS4. When the device is finished add, this WIFI Outlet can be opened, closed, countdown and timing.1. In the process of adding device, you must correctly select the router's WIFI Please Note:device name and fill in the correct WIFI password, otherwise the device willnot be able to add successfully.2. This WIFI Outlet can only be paired with one phone device. If you want multiple phones to control the WIFI Outlet, click the "profile" then chosethe " Device Sharing".3. When the device fail to add in the App, please try to enter the AP mode. Before enter the AP mode please press the top or bottom button 5 times continuously, then press and hold at the sixth for 5 seconds then release, the LED indicator in green and slowly blinks.OPERATION AND LED INDICATIONConnecting to the network.Quick Blinking Green:Green bright after 2 seconds off: Connected to the network.Solid Blue:Off: Soild Green: Network normaly or in standby mode.AP mode.Slow Blinking Green:The WIFI Switch is switched on.The WIFI Switch is switched off.20180614-90014 FCC COMPLIANCE STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This cause undesired operation.device must accept any interference received, including interference that may FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an RF Exposure: A distance of 20 cm shall be maintained between the antennauncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.and users, and the transmitter module may not be co-located with any other transmitter or antenna. Federal Communication Commission Interference StatementThe equipment has been tested and found to comply with the limits for a class B B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipment uses, generates and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction, may cause harmful interferenceoccur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipmentto radio communication. However, there is no guarantee that interference will notoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Non-modification Statement:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
INSTALLATION INSTRUCTIONS -02- -03--01- DESCRIPTION FEATURES WF15S-3WOn/Off Switch  SPECIFICATIONS INSTALLATIONSingle Switch Wiring SchematicWiring Diagram:WARNINGS AND CAUTIONS6. Check connections to be sure they are tight and no bare conductors are exposed.7. Insert the WF15S-3W switch into the standard outlet box carefully.8. Make sure the WF15S-3W switch to the box using the supplied screws.9. Attach the wall plate.10. Restore power at the circuit breaker and test the system.White (Neutral)Red(Load)WF15S-3WGreen (Ground)Black (Line/Hot)Wireless Home Automation Control Device OPERATIONS Manual ControlThe switch paddle on the WF15S-3W allows the user to:1, Turn ON/OFF the connected lighting.1, To turn the connected lighting ON: Tap the top of the switch paddle.2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.Perfect Replacement for regular wall switch, 120VAC, 15Amp Manual and Remote ON/OFF control of any connected lighting and other electricalelectrical loadCan be used for signal pole or 3- Way (Multi-location) with Auxiliary Switch (sold The WF15S-3W ON/OFF Switch is a perfect wireless manual and remote on/off control replacement of regular wall switch, controlling incandescent, LED, fluorescent, ballast and so on. This WF15S-3W ON/OFF Switch works with 3-Way Auxiliary 4. Disconnect the wiring from the existing switch.5. Connect this WF15S-3W switch as shown in the wiring diagram: Black lead to hot wire, white lead to neutral wire, red lead to load wire, green lead to ground wire.1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuitbreaker or fuse and test that power is off before wiring.2. Remove wall plate and existing switch mounting screws.3. Carefully remove the existing switch from the switch box. Traveler works with 3-way Auxiliary Switch control( sold separately).3-Way Wiring Schematic using one WF15S-3W and one 3-way Auxiliary SwitchYellowGroundGreenTravelerWhiteNeutralRedLoad (to light fixture)BlackHot (from breaker)LED LightSwitch PaddleSupply Connection.....................................14 AWG wires, suitable for at least 75°CWire Strip Length.................................................................................16mm(5/8 in.)Screw Torque................................................................................................20 lbf-inInterchangeable Face CoverInterchangeable Color Face PlateTo replace the face cover, just use a flat screwdriver to pry-off the interchangeable plate.Voltage.............................................................................................. 120VAC, 60HzIncandescent..................................................................................................1000WResistive................................................................................................1800W(15A)Motor.............................................................................................................. 1/2 HPStandard Ballast............................................................................................1200VAElectronic Ballast...................................................................................................5AOperating Temperature.........................................................32°F~104°F(0°C~40°C)Protocol.........................................................................................IEEE 802.11b/g/nWireless Type.............................................................................................. 2.4GHzhome, condominiums and apartment. Switch that reducing energy consumption, enhancing the value of technology of your Be sure to read the instruction carefully before installation, and the manufacturer will not be responsible for any product damage that does not follow the instruction1. Wet hands are strictly prohibited.2. Must work strictly according to the rated load.3. Do not continue to work after self-disassembly of any nature and damage of external forces.You can Turns your devices on or off at any time or anywhere have Internet usingthe free Tuya App on your smartphone After a power failure, the WF15S-3W on/off switch returns to OFF state.Please Note:Tuya Smart App Control1. Download Tuya Smart app from the App Store or Google Play.2. Connect mobile device to your 2.4GHz WIFI network. Please note thisSmart outlet can only be connected to 2.4GHz network.separately)White(Netural)Red(Load)Traveler(Yellow)SWITCHWF15S-3WGreen(Groud)Black(Hot)White(Netural)Traveler(Yellow) Red(Load)WF15S-3WSWITCHBlack(Hot)Green(Groud)White(Netural)Traveler(Yellow) Red(Load)SWITCHBlack(Hot)Green(Groud)WF15S-3WWiring Method 1 Wiring Method 2Wiring Method 3
-05--04-  WARRANTY INFORMATIONOur company warranties its products to be free of defects in materials and workman-ship for a period of two (2) years. There are no obligations or liabilities on the part use or performance of this product or other indirect damages with respect to lossof property, revenue, or profit, or cost of removal, installation or reinstallation.of our company for consequential damages arising out of or in connection with theJun, 2018INSTALLATION INSTRUCTIONS4. When the device is finished add, this WIFI Outlet can be opened, closed, countdown and timing.d. Click the bottom button e. Enter your Wifi password f. Finished a. Login the Tuya b. Click the button “+”c. Select the "Electrical outlet"1. In the process of adding device, you must correctly select the router's WIFI Please Note:device name and fill in the correct WIFI password, otherwise the device willnot be able to add successfully.2. This WIFI Outlet can only be paired with one phone device. If you want multiple phones to control the WIFI Outlet, click the "profile" then chosethe " Device Sharing".3. When the device fail to add in the App, please try to enter the AP mode. Before enter the AP mode please press the top or bottom button 5 times continuously, then press and hold at the sixth for 5 seconds then release, the LED indicator in green and slowly blinks.OPERATION AND LED INDICATIONConnecting to the network.Quick Blinking Green:Green bright after 2 seconds off: Connected to the network.Solid Blue:Off: Soild Green: Network normaly or in standby mode.AP mode.Slow Blinking Green:The WIFI Switch is switched on.The WIFI Switch is switched off.3. Launch Tuya and follow the in-app instructions to connect the WIFI outlet to your network. FCC COMPLIANCE STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This cause undesired operation.device must accept any interference received, including interference that may FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an RF Exposure: A distance of 20 cm shall be maintained between the antennauncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.and users, and the transmitter module may not be co-located with any other transmitter or antenna. Federal Communication Commission Interference StatementThe equipment has been tested and found to comply with the limits for a class B B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipment uses, generates and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction, may cause harmful interferenceoccur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipmentto radio communication. However, there is no guarantee that interference will notoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Non-modification Statement:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Navigation menu