WEIKING TECHNOLOGY ZK606 Bluetooth Speaker User Manual BT236

SHENZHEN WEIKING TECHNOLOGY CO.,LTD Bluetooth Speaker BT236

15_BT236 UserMan

Volume UPBT236Volume DownPress “ ”，“ ” buttons simultaneously until LEDIndicator fast blinking blue to disconnect the currentconnected device, and go into new Bluetooth-paring mode.Power-on/offPlay/Pause/Mute(Aux-in mode)BT236Flash Blue & Green• Bluetooth Version: 4.2• Suport:A2DPV1.2,AVRCPV1.4,HPV1.6,HSPV1.2• Wireless work distance:10meters• Rated Power: 2 x 5W• Driver Unit: 2 xφ48mm (4Ω,12W)• Frequency response: 100Hz-18kHz• Signal-to-noise ratio: >80dB• Battery type: Lithium-ion (3.7V/2000mAh)• DC input voltage/current: 5V ±0.25V /2A• Playtime: 6-8 hours (varies by volume level and content)• Battery charge time: 3-4 hours• Dimensions: 158.5 x 65 x62.5 mm• Weight: 355gTheTWS technology enables you to use two speakerspairing via Bluetooth to create a wireless dual-channelsystem to deliver true stereo sound effect. TWS connection operation1.Place the two speakers near each other (the distance should not be over 10 meters).2.Power on the two speakers, double click the buttonbutton on one speaker as MASTER speaker (playback left channel ), the LED indicator fast blinking blue and green, then the two speaker will pair to each other automatically (The other speaker will be as SLAVEspeaker and playback right channel) 3.Once paired, the MASTER speaker LED indicatorslow flash blue.TWS (True Wireless Stereo) Function Disconnect the TWS connection Press“ ”, “ ” button on one of the speaker simultaneously until LED Indicator fast blinking blue to disconnect the TWS connection. Overvivew of SpeakerCharging • 1 xSpeaker• 1x Micro-USB Cable• 1 xAUX Cable (Ф3.5mm)• 1x User ManualPackage IncludesUSB Changing PortAux-InLEDNote:• When power on, the speaker automatically reconnects to the last mobile device it was connected to. (The speaker can memorize maximum of 8 paired devices ).• The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired for power saving.Play / Pause………………Click Volume Up……………Click Volume Down………Click Next track…………Press and Hold Previous track…………Press and Hold Switch Bluetooth mode/Aux-in mode…………ClickAnswer an incoming call…………ClickReject an incoming call…………Press and HoldEnd the current call……………ClickRedial last-called number…………Press and HoldNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu