Voxx Electronics DEIINKEY Car Alarm Remote Transmitter User Manual Blister Card Clifford Motorcycle Key

DEI Headquarters, Inc. Car Alarm Remote Transmitter Blister Card Clifford Motorcycle Key

manual

The Science of Security™CClliiffffoorrdd PN 904120Compatible with thefollowing systems:GGPP11000000TT ((GG55))AArrrrooww 55 ((GG55))PPoollaarriiss 44 ((GG44))CCyybbeerr 22 ((GG44))AAccee 220000 ((GG44))AArrrrooww 33 ((GG44)) MMaattrriixx 11
MADE IN CHINA©2005 Directed Electronics, Inc. Vista CA 92081All rights reserved.P/N 904120 04-051. IGNITION ON: Place the key into the ignition andturn to the ON position or start the engine.2. ENTER PIN NUMBER: Enter your PIN numberusing the Plainview 2 valet switch.Note: The Factory default PIN number is written onthe back of the system owner’s guide.3. PRESS/HOLD/RELEASE: Immediately PRESSand HOLD the *button until you hear one chirpand the Status LED turns on, then RELEASE the*button.4. PRESS/RELEASE: PRESS and RELEASE the"blank" button once. Pause until you hear onechirp.5. PRESS/RELEASE: PRESS and RELEASE the *button once. The siren will chirp once as you pushthe button.6. TRANSMIT: Press the button on you newtransmitter. The siren will chirp once to confirm ithas received the transmission.7. TRANSMIT AGAIN: Press the button asecond time. The siren will chirp twice to confirm ithas learned your new transmitter.8. IGNITION OFF: Turn the ignition off and removethe key: The alarm will chirp three times toindicate exiting transmitter learn routine.9. TEST TRANSMITTER: Press the buttonto verify that the transmitter is operating the alarmsystem.Note: This transmitter auto-learn routine is applicableto specific system/transmitter combinations, use thefollowing reference guide or consult your local Clifforddealer for your particular application904120 transmitter: GP1000T/Arrow 5/Arrow 3/Cyber 2904065 transmitter: Arrow 5 /Arrow 3 / Cyber 2 904100 transmitter: Concept 100 / Concept 450/ Intelliguard 6000 / Cyber 4 904075 transmitter: All other systemsThis device complies with Part 15 of FCC rules.Operation is subject to the following conditions: (1)This device may not cause harmful interference, and(2) This device must accept any interferencereceived, including interference that may cause unde-sired operation. Changes or modifications notexpressly approved by the party responsible forcompliance could void the user's authority to operatethis device.22 BBuuttttoonn,, IInn--KKeeyy RReeppllaacceemmeenntt TTrraannssmmiitttteerr PN 904120To program your new transmitter:

Navigation menu