Voxx Electronics DEI7141 Security/Remote Control Transmitter User Manual 7141P 10 06 indd

DEI Headquarters, Inc. Security/Remote Control Transmitter 7141P 10 06 indd

manual

Compatible with the following systems: Python 502Python 702Python 902ReplacementTransmitterREPLACEMENT TRANSMITTERModel 7141P, 4 Button, Stealth Code RemoteThe following Learn Routine can be used to program this replacement transmitter to the system. In order to enter the Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port.1. Door. Open a door.2. Key. Turn the key to the ON position. 3. Choose. Within 5 seconds press and release the Valet/Program button the number of times corre-sponding to the desired channel listed below. Once you have selected the channel, press the Valet/Program button once more and hold it. The LED will flash the same number of times as the channel selected and the siren (if connected) will chirp to confirm the selected channel. Do NOT release the button.4. Transmit. While holding the Valet/program button, press the button from the transmitter you wish to assign to that channel. The unit will chirp (if horn or siren connected) to confirm that the transmitter has been taught to the receiver 5. Release. Once the code is learned you can release the Valet/Program button and remove the key. Channel Number Functionwith remote start without remote start 1 7 Auto-learn Standard Configuration 2 8 Auto-learn Single-Button Configuration 11 9 Delete All TransmittersStandard Configuration A remote that has been programmed to an standard configuration will use separate buttons for arm and disarm similar to a factory keyless entry. Using the expanded configuration, the transmitter buttons are assigned to the following functions:Lock Icon ButtonThe lock icon button arms and locks the system.Unlock Icon ButtonThe unlock icon button disarms and unlocks the system.AUX Icon ButtonsThe AUX icon button operates channel 2.Siren (or Star) Icon ButtonThe siren (or star) icon button operates Panic only.Unlock and Lock (or Star) Icon ButtonsWhen pressed together, the lock and unlock (or star) icon buttons operate channel 3.P Button (on the back of the transmitter)Used to enter the Transmitter's programming menu. (See Security/ Remote Start manual for details).FCC/ID NoticeThis device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause unde-sired operation.CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.MADE IN TAIWAN©2006 Directed Electronics, Vista CA 92081All rights reserved.P/N 7141P 10-06P/N 7141PPython 1-Way Transmitter

Navigation menu