Voxx Electronics DEI474P 4-Button HF, Stealth Code Remote User Manual manual

DEI Headquarters, Inc. 4-Button HF, Stealth Code Remote manual

manual

Single-Button ConfigurationA remote that has been programmed to a single-but-ton configuration will control both arm/lock and dis-arm/unlock from the same button. Using the one-but-ton configuration, the transmitter buttons are assignedto the following functions:Lock Icon ButtonThe lock icon button arms/locks and disarms/unlocksthe system. When held for three seconds, Panicmode is activatedUnlock Icon ButtonThe unlock icon button operates Channel 2 and silentarms/locks and disarms/unlocks.Unlock and Lock Icon ButtonsWhen pressed together, the lock and unlock iconbuttons operate channel 3.Standard ConfigurationA remote that has been programmed to an standardconfiguration will use separate buttons for arm anddisarm similar to a factory keyless entry. Using theexpanded configuration, the transmitter buttons areassigned to the following functions:Lock Icon ButtonThe lock icon button arms and locks the system.Unlock Icon ButtonThe unlock icon button disarms and unlocks the system.AUX Icon ButtonsThe AUX icon button operates channel 2.Siren Icon ButtonThe siren icon button operates Panic only.Unlock and Lock Icon ButtonsWhen pressed together, the lock and unlock iconbuttons operate channel 3.REPLACEMENT TRANSMITTER Model 474P, 4–Button HF, Stealth Code Remote440HP OK2F660XP OK2FSYSTEM Date CodeMADE IN TAIWAN©2002 Directed Electronics, Inc. Vista CA 92083All rights reserved. 9/02P/N 474PREPLACEMENT TRANSMITTERModel 474P, 4 Button HF, Stealth Code Remote1. Key. Turn the key to the ON position 2. Door. Open a door (660XP only).3. Choose. Within 5 seconds press and release theValet/Program button the number of times corre-sponding to the desired channel listed below.Once you have selected the channel, press theValet/Program button once more and hold it. TheLED will flash the same number of times as thechannel selected and the siren (660XP only) willchirp to confirm the selected channel. Do NOTrelease the button.4. Transmit. While holding the Valet/programbutton, press the button from the transmitter youwish to assign to that channel. The unit will chirp(660XP only) to confirm that the transmitter hasbeen taught to the receiver 5. Release. Once the code is learned you can releasethe Valet/Program button and remove the key.The following Learn Routine can be used to programthis replacement transmitter to the system. In order toenter the Learn Routine, the system’s Valet/Programswitch must be plugged into the BLUE port.Channel Number Function7 Auto-learn Standard Configuration8 Auto-learn Single-Button Configuration9 Delete All TransmittersFCC/ID NoticeThis device complies with Part 15 of FCC rules.Operation is subject to the following conditions: (1) Thisdevice may not cause harmful interference, and (2) Thisdevice must accept any interference received, includinginterference that may cause undesired operation.CAUTION! Changes or modifications not expresslyapproved by the party responsible for compli-ance could void the user's authority to oper-ate this device.473_474 Blister Packs.qxd 9/24/2002 3:33 PM Page 2
460HP OK2FREPLACEMENT TRANSMITTERModel 473, 3–Button HF, Stealth Code RemoteSYSTEM Date CodeMADE IN TAIWAN©2002 Directed Electronics, Inc. Vista CA 92083All rights reserved. 9/02P/N 473PSingle-Button ConfigurationA remote that has been programmed to a single-but-ton configuration will control both arm/lock and dis-arm/unlock from the same button. Using the one-but-ton configuration, the transmitter buttons are assignedto the following functions:Lock/Unlock Icon ButtonThe lock/unlock icon button arms/locks and dis-arms/unlocks the system.AUX Icon ButtonThe AUX icon button operates Channel 2 and silentarm/lock and disarm/unlock.Siren Icon ButtonThe siren icon button operates Panic only.Lock/Unlock and AUX Icon ButtonsWhen pressed simutaneously, the lock/unlock andAUX icon buttons activate Channel 3.FCC/ID NoticeThis device complies with Part 15 of FCC rules.Operation is subject to the following conditions: (1) Thisdevice may not cause harmful interference, and (2) Thisdevice must accept any interference received, includinginterference that may cause undesired operation.CAUTION! Changes or modifications not expresslyapproved by the party responsible for compli-ance could void the user's authority to oper-ate this device.REPLACEMENT TRANSMITTERModel 473P, 3 Button HF, Stealth Code Remote1. Key. Turn the key to the ON position 2. Door. Open a door.3. Choose. Within 5 seconds press and release theValet/Program button the number of times corre-sponding to the desired channel listed below.Once you have selected the channel, press theValet/Program button once more and hold it. TheLED will flash the same number of times as thechannel selected and the siren will chirp to confirmthe selected channel. Do NOT release the button.4. Transmit. While holding the Valet/programbutton, press the button from the transmitter youwish to assign to that channel. The unit will chirpto confirm that the transmitter has been taught tothe receiver 5. Release. Once the code is learned you can releasethe Valet/Program button and remove the key.The following Learn Routine can be used to programthis replacement transmitter to the system. In order toenter the Learn Routine, the system’s Valet/Programswitch must be plugged into the BLUE port.Channel Number Function8 Auto-learn Single-Button Configuration9 Delete All Transmitters473_474 Blister Packs.qxd 9/24/2002 3:33 PM Page 4

Navigation menu