Visonic MDT122S User Manual 3 pages

Visonic Inc. 3 pages

3 pages

DE2291U firstMDT-122 SMDT-122 SMDT-122 SMDT-122 SRF / IR Man-Down Transmitter User’s Guide1. INTRODUCTION1. INTRODUCTION1. INTRODUCTION1. INTRODUCTIONThe MDT-122 S is an automatic personal security transmitter.This micro-processor controlled transmitter is designed for use byguards in a prison, by security officers in an organization orinstitution, or by employees in a large industrial complex (as anindustrial safety device). The unit is a part of the SpiderAlertnetwork. The transmitter is activated in the following events: 1. PANICWhen the guard needs help, he presses both buttons(pushing both buttons is required to prevent an accidentalpanic message transmission). 2. MANDOWNWhen the guard falls down (automatic transmission when theunit is tilted by more than 60°). 3. PULL-CORDThe MDT-122 S automatically transmits a pull-cord alarm:A. When the unit is forcibly pulled from the holder and thepull cord is detached from the holder’s beltB. When the unit is intentionally pulled by the holder(emergency event) and the pull cord is detached fromhis belt. 4. TAMPERWhen the transmitter is opened by an unauthorized person. 5. LEFT OR RIGHT BUTTONWhen the guard presses the left or right push-button, anattendance message is sent to the security main station(confirming that he is not attacked) and the unit is also tested(the LED is lit).When activated, the transmitter delivers an identifiable alertmessage (one of various messages, according to the eventspredetermined priority) to the main security station. Figure 1 - External View Figure 2 - Activating theInternal Tilt SwitchWhen the transmitter is activated, the holder’s name and exactlocation are displayed on main security station screen (accordingto the SpiderAlert network programming) and a siren and/oraudible alarm are activated, to provide the necessary help (seefigure 3).The transmitter is attached to the user’s belt with a clip like apager, or inside a pouch / holster and connected with a pull cordto the guard’s belt.The transmitter is not activated during the guard’s regular dailyactivities (running, jumping, sitting, bending, removing cloths,going to bathroom and going off and on duty).4. USING THE MDT-122 S4. USING THE MDT-122 S4. USING THE MDT-122 S4. USING THE MDT-122 S4.1 Initial FunctionsWhen the MDT-122 S leaves the factory, the internal batterycontact (+) is covered by an isolation foil. To make the unitoperational, perform the following actions: 1st. Press the belt clip, by your hand, to gain access to the MDT-122 S cover’s screw (see figure 1). 2nd. Remove the cover Philips screw. 3rd. Press (with your finger) at the center of the top side (on theTEMP TILT OFF inscription) and carefully open the front cover.Caution: When opening the MDT-122 S, the IR LEDsshould not be touched, to prevent their movement. If the IRLEDs are moved, the IR beams may not be directed towardsthe IR window and as a result the IR transmission rangemight be reduced.Vertical (normal)Position60° tilt60° tiltLeftpushbuttonTemporaryTILT OFFpush-buttonTilt ON/OFFslide switchBelt clipPullcordCover’s screw(between beltclip’s jaws)RightpushbuttonLEDIR windowSpiderAlert main stationSpiderBusMDT-122 Sin alarm(transmission)positionSR-520RF+IR receiverAttacked holder’sname and locationare displayed onthe screenSpiderAlertnetworkcontrollerI/O unitwith Siren /loudspeaker❇John Markusis attacked!PagingtransmitterGuards with pagersFigure 3 - MDT-122 S Integration in the SpiderAlert Network
D2291U second 4th. Pull out the isolation foil that is inserted between the batteryto the battery holder (+) pole. 5th. Change DIP switches positions as desired (see table 1). 6th. Put the unit’s cover on its place. 7th. Press the belt clip, by your hand, to gain access to thecover’s screw hole. 8th. Insert the cover screw and secure it with a Philips screw-driver.4.2 Individual or Shift Rotated UnitsThe MDT-122 S can be used as:A. Individual TransmitterWhen the MDT-122 S is used as a personal transmitter foreach guard: One. There is only one responsible guard for the transmitterand therefore it is better handled. Two. It is not necessary to update the holder name every shift. Three. There is no need for check-in and check-out for thetransmitter turn over.B. Shift-rotated transmitterWhen the MDT-122 S is turned over among holders indifferent shifts: One. There is saving on units quantities. Two. The turn-over action should be controlled by a dedicatedperson Three. It is necessary to update the guard’s name on thesoftware, whenever the unit is turned over to anotherguard4.3 Using the Pull Cord Alarm OptionIf it is desired to disable the pull cord option, it is necessary tomove the internal DIP switch number 2 to OFF position, asdescribed in section 3.5 (default position is ON).4.4 Selecting Other Desired OptionsSelect the buzzer ON/OFF, supervision ON/OFF, supervisionmessage type, pre-tilt alarm and tilt alarm delay ON/OFF options,as detailed in section 3.5.5. MAINTENANCE5. MAINTENANCE5. MAINTENANCE5. MAINTENANCENo maintenance is required for the MCT-122 S, exceptreplacement of the internal battery.The battery is automatically tested every 1 hour. If the batteryvoltage is low, a “low battery” warning message is automaticallyincluded in every transmission and the unit’s LED indicatorflashes (while pressing the left or right push-button switch) untilthe battery is replaced.Replace the 3.6 V Lithium battery, as follows (see fig. 6): 1st. Open the unit’s cover, as described in paragraph 4.1A - 4.1C. 2nd. Remove the old battery and install a new one. Verify that thebattery poles (+) and (-) are located as marked on the batteryhousing. 3rd. Close the unit’s cover, as described in paragraph 4.1F - 4.1H. 4th. Use moderate pressure to close the cover, with your fingers,until its snaps shut. 5th. Secure the front cover with its screw.Figure 6 - Isometric view (opened unit)6. Product LimitationsVisonetix wireless systems are very reliable and are tested tohigh standards. However, due to low transmitting power andlimited range (required by FCC and other regulating authorities),there are some limitations to be considered: 1st. Receivers may be blocked by radio signals occurring on ornear their operating frequencies, regardless of the digital codeused. 2nd. Wireless equipment should be tested regularly to determinewhether there are sources of interference and to protectagainst faults..WARRANTYVisonetix Ltd., and its affiliates, (hereinafter collectively referred to as "the Manufacturer")warrants its products (hereinafter referred to as "the Product”) to be free of defects inmaterials and workmanship under normal operating conditions and use for a period ofone year from the date of shipment by the Manufacturer. The Manufacturer's obligationsshall be limited within the warranty period, at its option, to repair or to replace thedefective Product or any defective component or part thereof. To exercise this warranty,the product must be returned to the manufacturer freight prepaid and insured.This warranty does not apply to repairs or replacement caused by improper installation,Product misuse, failure to follow installation or operating instructions, alteration, abuse,accident, tampering, repair by anyone other than the Manufacturer, external causes, andfailure to perform required preventive maintenance. This warranty also does not apply toany products, accessories, or attachments used in conjunction with the Product,including batteries, which shall be covered solely by their own warranties, if any. TheThe Manufacturer shall not be responsible for any dismantling, installation, reinstallation,purchasing, shipping, insurance, or any similar charges.The Manufacturer shall have no liability for any damages, including without limitation, anydirect, indirect, incidental, special, or consequential damages, expenses, costs, profits, lostsavings or earnings, or other damages arising out of the use of the Product or the removal,installation, reinstallation, repair or replacement of the Product or any related events. In theevent that there is any liability against the Manufacturer, such liability shall be limited to thepurchase price of the Product which amount shall be fixed as liquidated damages.The purchaser and user understand that this Product may be compromised or circumventedby intentional acts; that the Product will not in all cases prevent death, personal injury,property damage, or other loss resulting from burglary, robbery, fire or other causes; andthat the Product will not in all cases provide adequate warning or protection. The purchaserBattery DIPswitches
DE2471U thirdManufacturer shall not be liable for any damage or loss whatsoever, whether directly,indirectly, incidentally, consequentially or otherwise, resulting from a malfunction of theProduct due to products, accessories, or attachments of others, including batteries, usedin conjunction with the Product.THE MANUFACTURER MAKES NO EXPRESS WARRANTIES EXCEPT THOSESTATED IN THIS STATEMENT. THE MANUFACTURER DISCLAIMS ALL OTHERWARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE. THE MANUFACTURER’S SOLE RESPONSIBILITY FOR WARRANTYCLAIMS IS LIMITED TO REPAIR OR TO REPLACE AS SET FORTH IN THISSTATEMENT.The Manufacturer shall have no liability for any death, personal injury, property damage,or other loss whether direct, indirect, incidental, consequential, or otherwise, based on aclaim that the Product failed to function. However, if the Manufacturer is held liable,whether directly or indirectly, for any loss or damage arising under this limited warrantyor otherwise, regardless of cause or origin, the Manufacturer's maximum liability shall belimited to the purchase price of the Product, which shall be fixed as liquidated damagesand not as a penalty, and shall be the complete and exclusive liability of theManufacturer.The Manufacturer shall not, under any circumstances whatsoever, be liable for anyinaccuracy, error of judgment, default, or negligence of the Manufacturer, its employees,officers, agents, or any other party, or of the purchaser or user, arising from anyassistance or communication of any kind regarding the configuration, design, installation,or creation of security system involving the Product, that being the responsibility of thepurchaser or user.If the Manufacturer is unable to make such repair or replacement, the Manufacturer’sentire liability shall be limited to the cost of a reasonable substitute product.and user also understand that a properly installed and maintained alarm may reduce therisk of events such as burglary, robbery, and fire without warning, but it is not insurance or aguarantee that such events will not occur or that there will be no death, personal injury,property damage, or other loss as a result of such events.By purchasing the Product, the purchaser and user shall defend, indemnify and hold theManufacturer, its officers, directors, affiliates, subsidiaries, agents, servants, employees,and authorized representatives harmless from and against any and all claims, suits, costs,damages, and judgments incurred, claimed, or sustained whether for death, personal injury,property damage, or otherwise, because of or in any way related to the configuration,design, installation, or creation of a security system involving the Product, and the use, sale,distribution, and installation of the Product, including payment of any and all attorney’s fees,costs, and expenses incurred as a result of any such events.The purchaser or user should follow the Product installation and operation instructions andtest the Product and the entire system at least once each week. For various reasons,including but not limited to changes in environmental conditions, electric, electronic, orelectromagnetic disruptions, and tampering, the Product may not perform as expected. Thepurchaser and user are advised to take all necessary precautions for the protection andsafety of persons and property.This statement provides certain legal rights. Other rights may vary by state or country.Under certain circumstances, some states or countries may not allow exclusion or limitationof incidental or consequential damages or implied warranties, so the above exclusions maynot apply under those circumstances and in those states or countries.The Manufacturer reserves the right to modify this statement at any time, in its solediscretion without notice to any purchaser or user. However, this statement shall not bemodified or varied except by the Manufacturer in writing, and the Manufacturer does notauthorize any single individual to act on its behalf to modify or vary this statement.Any questions about this statement should be directed to the Manufacturer.8/96VISONETIX LTD. (ISRAEL): P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: (972-3) 645-6890, FAX: (972-3) 645-6891VISONIC SYSTEMS INC. (U.S.A.): 10 NORTHWOOD DRIVE, BLOOMFIELD CT. 06002-1911. PHONE: (860) 242-9945, (800) 874-3989 FAX: (860) 242-0191VISONIC LTD. (UK): UNIT 1, STRATTON PARK, DUNTON LANE, BIGGLESWADE, BEDS. SG18 8QS. PHONE: (01767) 600857 FAX: (01767) 601098VISONETIX LTD. 1998 MDT-122 S, DE2291U (REV. 0, 12/98)

Navigation menu