Verifone V200T2GDE Mobile Point of Sale Terminal User Manual DOC470 003 EN A V200t Installation Guide
VeriFone Inc Mobile Point of Sale Terminal DOC470 003 EN A V200t Installation Guide
Verifone >
Contents
- 1. DOC470_001_EN_A_V200t_Certifications_and_Regulations
- 2. DOC470-003-EN-A_V200t_Installation_Guide
DOC470-003-EN-A_V200t_Installation_Guide
![Verifone Part Number DOC470-003-EN-A, Revision AV200tInstallation Guide](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-1.png)
![All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the writtenpermission of Verifone, Inc.The information contained in this document is subject to change without notice. Although Verifone has attempted to ensure theaccuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs arefor illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample programbefore placing the software into productive use. This document, including without limitation the examples and software programs, issupplied “As-Is.”Verifone Inc.1-800-Verifonewww.verifone.comVerifone Part Number DOC470-003-EN-A, Revision AV200t Installation Guide© 2017 Verifone, Inc.Verifone and the Verifone logo, are registered trademarks of Verifone. Other brand names or trademarks associated with Verifone’sproducts and services are trademarks of Verifone, Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Product WarrantyFor product warranty information, go to http://www.verifone.com/terms. Comments? Please e-mail all comments on this document to your local Verifone Support Team.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-2.png)
![V200T INSTALLATION GUIDE 3CONTENTSPREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Guide Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Acronym Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6CHAPTER 1Overview V200t Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Front Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Rear Compartments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Exceptional Ease of Use and Ergonomics . . . . . . . . . . . . . . . . . . . . . . . . . . 11Critical Security Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Countertop Performance in a Hand-Over Design . . . . . . . . . . . . . . . . . . . . . 12CHAPTER 2Setup Selecting Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Contactless Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Unpacking Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Installing or Replacing MSAM, Micro SD and SIM Cards. . . . . . . . . . . . . . . . . . 16Opening Card Compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Changing or Installing MSAMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Changing or Installing Micro SD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Changing or Installing SIM Cards (for V200t Plus Only). . . . . . . . . . . . . . . . 18Establishing Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Connecting by Telephone Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Connecting by Ethernet Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Loading Printer Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Connecting Optional Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Optional Device Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Connecting the V200t to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Connecting ECRs to the V200t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Connecting Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Magnetic Stripe Card Reader Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Contactless Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Periodic Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-3.png)
![4V200T INSTALLATION GUIDECHAPTER 3Specifications V200t Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Unit Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27External Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Primary Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28SAM Card Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28SIM Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28CHAPTER 4TroubleshootingGuidelinesDisplay Panel Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Transactions Fail To Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29CHAPTER 5Service and Support Maintenance and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Service Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33APPENDIX ACaution and Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-4.png)
![V200T INSTALLATION GUIDE 5PREFACEThis guide is the primary source of information for setting up and installing the V200t device.Audience This guide provides simple descriptions of the V200t features and the basic information for installing and configuring the V200t.Organization This guide is organized as follows:Chapter 1, Overview. Provides an overview of a V200t device.Chapter 2, Setup. Explains how to set up and install the V200t and establish connections with other devices.Chapter 3, Specifications. Discusses the power requirements and dimensions of V200t.Chapter 4, Troubleshooting Guidelines. Provides troubleshooting tips.Chapter 5, Service and Support. Provides information on contacting your Verifone service provider, ordering accessories or documentation from Verifone, and maintaining the V200t unit.Appendix A, Caution and Warning Messages. Shows the UL/cUL certification-compliant translations of all Warning and Caution messages in this installation guide.RelatedDocumentationTo learn more about the V200t device, please refer to the following documents and their associated Verifone Part Numbers (VPN):GuideConventionsPlease refer to the following document conventions for quickly identifying special formatting.Table 1 describes these conventions and provides examples of their use.V200t Certifications and Regulations VPN DOC470-001-ENV200t Quick Installation Guide VPN DOC470-002-ENV200t Reference Guide VPN DOC470-004-ENTable 1 Document ConventionsConvention Meaning ExampleBlue Text in blue indicates terms that are cross-references.See Guide Conventions.Italics Italic typeface indicates book titles or emphasis.You must not use this unit underwater.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-5.png)
![PREFACEGuide Conventions6V200T INSTALLATION GUIDEAcronym DefinitionsPlease refer to Table 2 for the acronyms used in this manual. The pencil icon is used to highlight important information.RS-232-type devices do not work on the communication port.The caution symbol indicates hardware or software failure, or loss of data.The unit is not waterproof or dustproof, and is intended for indoor use only.The lightning symbol is used as a warning when bodily injury might occur.Due to risk of shock do not use the unit near water.Table 1 Document ConventionsConvention Meaning ExampleNOTECAUTIONWARNINGTable 2 Acronym DefinitionsAcronym Definitions3DES Triple Data Encryption AlgorithmAC Alternating CurrentANSI American National Standards InstitutecUL Underwriters' Laboratories of CanadaDC Direct CurrentDUKPT Derived Unique Key Per Transaction Method as defined in the VISA’s POS Equipment Requirement: PIN processing and Data Authentication, International Version 1.0, August 1988ECR Electronic Cash RegisterEMV Europay, MasterCard, and VisaGPRS General Packet Radio ServiceHSPA High Speed Packet Access ISO International Organization for StandardizationMRA Merchandise Return AuthorizationMSAM Multiple Secure Access ModuleLAN Local Area NetworkLCD Liquid Crystal DisplayLED Light-Emitting DiodePED PIN Entry DevicePIN Personal Identification NumberPOS Point-of-SaleRS-232 Recommend Standard number 232SAM Secure Access ModuleUL Underwriters Laboratories](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-6.png)
![PREFACEGuide ConventionsV200T INSTALLATION GUIDE 7USB Universal Serial BusVPN Verifone Part NumberTable 2 Acronym Definitions (continued)Acronym Definitions](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-7.png)
![PREFACEGuide Conventions8V200T INSTALLATION GUIDE](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-8.png)
![V200T INSTALLATION GUIDE 9CHAPTER 1OverviewThis chapter presents the basics on the V200t terminal.V200t Terminal The V200t offers several communication options, enhanced display, increased processing power and two USB peripheral ports.The V200t terminal uses a robust, sleek, and highly functional design. With modular communication options, enhanced color display, increased processing power, expanded memory, and two USB peripheral ports.The V200t can utilize over-the-air connectivity, facilitating mobile telephony technology for sending and receiving data using Bluetooth, WiFi, or existing operator-provided 2G and 3G connectivity:This guide provides an introduction and basic setup procedures for V200t terminals.Figure 1 V200t Front ViewFront Features The V200t terminal provides the right combination of features and functions:•2.8-inch TFT color screen (QVGA, 240 RGB x 320 pixels) •4-way Navigation Button with Selection Keys•Backlit keypad with tactile and audible feedback.•Contactles (CTLS) reader•Smart card reader•Magnetic card reader](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-9.png)
![OVERVIEWV200t Terminal10 V200T INSTALLATION GUIDE•Integrated thermal printerRear Compartments After removing the rear covers, the underside of the V200t shows the following:Figure 2 V200t Cards Compartment•Dual MSAM slots •Dual SIM slots •Micro SD Card slot•Battery compartmentFigure 3 V200t Ports Compartment•Ethernet port•RS-232 port•RJ11 port•USB Host/Client port•Power port ](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-10.png)
![OVERVIEWFeatures and BenefitsV200T INSTALLATION GUIDE 11Features andBenefitsThe V200t terminal provides the following functionality:Exceptional Ease ofUse andErgonomics•Four-way navigation button with two function keys for UI access.•The contactless functionality offers a convenient payment option for consumers.•The bold design is sleek, stylish, and lightweight for conveniently handing the terminal to the consumer for PIN entry or other input.•A large 8-line by 21-character backlit display with backlit keypad, and extra-size menu prompts, simplify training and reduce help desk calls.•The multiple font-capable integrated thermal printer simplifies paper loading and reduces paper jams. Uses 57 mm wide x 40 mm diameter paper rolls, prints at 30 lines per second (LPS).•The triple-track, high-coercivity card reader handles most magnetic stripe cards.•Large, hard-rubber keys provide improved tactile feedback.•Intuitive keypad interface simplify training and reduce support requests.•Connects with most POS payment terminals, PCs, and ECRs.•Supports payment transactions in a variety of payment environments.•Rugged and reliable design absorbs hard knocks found at point-of-sale counters.•Sleek and stylish shape occupies minimal counter space.Critical SecurityProtection•Offers a choice of Master/Session or DUKPT key-management methods to protect PIN-based transactions.•The primary smart card reader and the MSAMs safeguard sensitive financial data and support multiple smart card schemes.•Certified for ISO7816-3, ISO7816-10 and EMV4.3 standards for smart card solutions. •Offers secure, reliable PIN input for expanding range of PIN-based transactions.•PCI 5.x-compliant for secure solutions, meeting the PED standard.•Meets ISO and ANSI standards for PIN encryption, key management, and MAC.•The VeriShield security architecture meets published specifications for PCI PTS POI and provides sophisticated file authentication to prevent execution of unauthorized software.•Key injection simplified and secured with Verifone’s SecureKit key loading software.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-11.png)
![OVERVIEWFeatures and Benefits12 V200T INSTALLATION GUIDECountertopPerformance in aHand-Over Design•The 32-bit processing and multi-tasking capabilities ensures fast processing of payment, payment-related, and value-added applications.•Exceptional display and printer graphics-handling capabilities that quickly render logos, graphical fonts, and character-based languages.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-12.png)
![V200T INSTALLATION GUIDE 13CHAPTER 2SetupThis chapter describes the setup procedure for the V200t, in the following sections:•Selecting Location•PIN Protection Measures•Unpacking Shipping Carton•Installing or Replacing MSAM, Micro SD and SIM Cards•Establishing Communication•Loading Printer Paper•Connecting Optional Devices•Connecting Power Supply•Smart Card Reader•Magnetic Stripe Card Reader Use•Contactless Transactions•Periodic InspectionSelectingLocationUse the following guidelines to select the best location for the V200t device.To Select a LocationChoose a location convenient for both merchant and client:•Far from heavy metal objects,•A flat support surface such as a countertop or a table,•Near a power outlet and the terminal or computer that connects to the V200t.WARNING For safety, do not string cables or cords across a walkway.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-13.png)
![SETUPPIN Protection Measures14 V200T INSTALLATION GUIDEEnvironmentalFactors•Do not use the unit where there is high heat, dust, humidity, moisture, or caustic chemicals or oils.•Keep the unit away from direct sunlight and anything that radiates heat, such as a stove or a motor.•Do not use the V200t outdoors. ElectricalConsiderations•Avoid using this product during electrical storms.•Do not use the V200t unit near water or in moist conditions.•Disconnect the device from its POS terminal before cleaning.ContactlessConsiderationsAvoid having metallic objects in proximity of the contactless antenna. If you need to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic mounting plate.PIN ProtectionMeasuresUse the following techniques to provide effective screening of PIN-entry devices (PEDs) during the PIN entry process. You can use these methods in combination, although in some cases a single method might suffice:•Position the terminal on the check-in stand in such a way as to block visual observation of the PIN-entry process. Examples include:•Visual shields designed into the check-in stand. The shields may be solely for shielding purposes, or may be part of the general check stand design.•Position the PED so that it is angled in such a way that PIN spying is difficult.•Install the PED on an adjustable stand that allows consumers to swivel the terminal sideways and/or tilt it forwards/backwards to a position that makes visual observation of the PIN-entry process difficult.•Position in-store security cameras so that the PIN-entry keypad is not visible.CAUTIONThe V200t is not waterproof or dustproof and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty.WARNINGDue to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon signs, high frequency or magnetic security devices, or electric motors).CAUTIONUsing an enclosed metal frame or mount may negatively affect contactless performance.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-14.png)
![SETUPUnpacking Shipping CartonV200T INSTALLATION GUIDE 15The following table describes the two preferred mounting methods and the recommended measures to protect from PIN capture in four observation corridors:Additionally, you may wish to implement the following to further increase security during PIN entry.•Offer PIN security literature at the point of sale•Use signage to limit the view of the V200t to just that of the cardholder.UnpackingShipping CartonCarefully inspect the shipping carton and its contents for possible tampering or damage.1Remove the V200t unit from the shipping carton. The standard package contains the PIN pad, power pack, telephone cable, and printer paper roll. Refer to Accessories and Documentation for more information on related accessories.Figure 4 V200t Box Contents2Remove any protective plastic wrap and place the unit on a table or countertop.Table 3 Mounting Methods and Protection MeasuresObservation CorridorsMethod Cashier Customer in Queue Customers Elsewhere On-site CamerasCountertop with Swivel StandNo Action Needed.Customer positions PEDNo action needed Do not install within view of camerasCountertop with-out standPosition the PED to face away from the cashier. Use signage to block cashier’s view.Position the PED between customer and the next in queue. Install the optional pri-vacy shield.Privacy Shield Installed Do not install within view of camerasNOTEA swivel stand gives the cardholder freedom to position the V200t to optimize their viewing angle. If you are installing a swivel stand, you must include prompts in your application directing the cardholder to position the V200t strategically to restrict the view of other customers.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-15.png)
![SETUPInstalling or Replacing MSAM, Micro SD and SIM Cards16 V200T INSTALLATION GUIDE3Remove the clear protective film from the display.4Replace all the packing materials, close the lid, and save the carton for repacking or moving the V200t unit in the future. Installing orReplacingMSAM, Micro SDand SIM CardsYou may need to install or replace the Multiple Security Access Module (MSAM), Micro Secure Digital (SD) and Subscriber Identity Module (SIM) cards.Opening CardCompartmentUse the following steps to get access to the MSAM, Micro SD and SIM card compartments:1Place the terminal face down on a soft and clean surface to protect the display from scratches.2Push the locking tab and swing out the compartment cover.3If it’s already installed, remove the battery (VPN BPK470-001-01-A) to get better access to the card slotsFigure 5 Accessing Cardholders4The MSAM, Micro SD and SIM cardholders are now accessible.WARNINGDo not use a unit that has been tampered with or otherwise damaged. This unit comes equipped with tamper-evident label. If a label or component appears damaged, immediately notify the shipping company and your Verifone representative or service provider.CAUTIONObserve standard precautions in handling electrostatically sensitive devices. Electrostatic discharges can damage the equipment. Verifone recommends using a grounded anti-static wrist strap.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-16.png)
![SETUPInstalling or Replacing MSAM, Micro SD and SIM CardsV200T INSTALLATION GUIDE 17Changing orInstalling MSAMsTo change or install MSAM cards:1Use steps 1 to 3 of Opening Card Compartment to get to the MSAM cardholder.2Remove the old card, if any, and insert the MSAM card carefully into the slot (with the gold contacts facing downward) until fully inserted.Figure 6 Inserting MSAM Card3If you are finished replacing or inserting cards, replace the battery and lock the rear cover back in place.Changing orInstalling Micro SDCardTo change or install Micro SD cards:1Use steps 1 to 3 of Opening Card Compartment to get to the Micro SD cardholder.2Remove the old card, if any, and insert the Micro SD card carefully into the slot (with the gold contacts facing downward) until fully inserted.Figure 7 Inserting Micro SD Card NOTEInsert the card with the card’s gold contacts facing away from you, toward the unit. Take note of the notched edge on the MSAM card for quick orientation. NOTEInsert the card with the card’s gold contacts facing away from you, toward the unit.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-17.png)
![SETUPInstalling or Replacing MSAM, Micro SD and SIM Cards18 V200T INSTALLATION GUIDE3If you are finished replacing or inserting cards, replace the battery and lock the rear cover back in place.Changing orInstalling SIM Cards(for V200t PlusOnly)To change or install SIM cards in V200t Plus units:1Use steps 1 to 3 of Opening Card Compartment to get to the SIM cardholder.2Remove the old card, if any, and insert the SIM card carefully into the slot (with the gold contacts facing downward) until fully inserted.Figure 8 Inserting SIM Card3If you are finished replacing or inserting cards, replace the battery and lock the rear cover back in place. NOTEInsert the card with the card’s gold contacts facing away from you, toward the unit. Take note of the notched edge on the SIM card for quick orientation.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-18.png)
![SETUPEstablishing CommunicationV200T INSTALLATION GUIDE 19EstablishingCommunicationYou can connect the V200t to your network by using the following options: •Connecting by Telephone Line•Connecting by Ethernet Cable.Connecting byTelephone LineConnect the telephone cord to the communication port on the terminal, then route it directly to a telephone wall jack (see Figure 9). This is a direct connection and the line is dedicated to the terminal.Figure 9 Direct Telephone ConnectionConnecting byEthernet CableConnect the ethernet cable to the ETH port on the terminal, then route it directly to a network jack (see Figure 10). This is a direct connection to your network.Figure 10 Ethernet ConnectionWARNINGTo reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-19.png)
![SETUPLoading Printer Paper20 V200T INSTALLATION GUIDELoading PrinterPaperBefore you can process transactions that require a receipt or record, you must install paper in the printer.The V200t uses a roll of 57 mm wide x 40 mm, single-ply, thermal sensitive paper.A pink out-of-paper indicator line appears on the edge of the paper before the end of the roll. After this line appears, there is enough paper remaining on the roll to conclude at least one more transaction.1Unlock the paper compartment by pulling up the latch and swinging the door downwards.2Remove any partial roll of paper in the printer tray by lifting it up.3Loosen the glued leading edge of the new paper roll or remove the protective strip. Unwind the paper roll past any glue residue.4Hold the roll so the paper feeds from the bottom of the roll.5Load the paper roll as shown in Figure 11, with the edge of the paper on the top of the roll.Figure 11 Opening Printer Door and Loading Paper RollCAUTIONPoor-quality paper can jam the printer and create excessive paper dust. Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact, friction, temperature, humidity, and oils affect the color and storage characteristics of the paper. Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.12](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-20.png)
![SETUPConnecting Optional DevicesV200T INSTALLATION GUIDE 216Swing the paper roll cover until it clicks shut, allowing a small amount of paper (past the glue residue) to extend outside the printer door.Figure 12 Closing Printer DoorConnectingOptionalDevicesThe V200t device supports some peripheral devices designed for use with electronic point-of-sale terminals.Different terminals support different devices, so for more information about optional devices, please contact your Verifone distributor.Optional DeviceConnectionsYou can connect several devices to your V200t. You can use the following cables for different types of device connections:•RJ9 to DB9 cable (VPN CBL000-051-02-A)•Multi-port coiled cable (VPN CBL470-006-02-A)Contact your Verifone representative or visit the online store at www.store.verifone.com for information on these devices.CAUTIONBefore connecting any peripheral device, remove the power plug from the terminal. Reconnect the power cord only after you are finished connecting the peripheral device(s). For complete information about peripheral installation and use, refer to the user documentation supplied with those devices.NOTEMake sure you replace the rear cover when all cables are installed. This provides some protection to the cables and connectors. Do not carry the terminal by the installed cables or pull the terminal about the by the cables. This may cause a cable to be removed or damage the cables.CAUTIONSome devices (ECRs and some PIN pads) require a separate power source. Before connecting to any device, remove the power cord from the V200t unit.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-21.png)
![SETUPConnecting Optional Devices22 V200T INSTALLATION GUIDEConnecting theV200t to a PCThe following illustration shows how to connect the V200t to a computer via the Multi-Communication port using the RJ9 to DB9 cable (VPN CBL000-051-02-A).Figure 13 Sample PC ConnectionConnecting ECRs tothe V200tThe V200t supports electronic cash registers (ECRs).The following illustration shows how to make a peripheral connection to the Multi-Communication port using the RJ9 to DB9 cable (VPN CBL000-051-02-A)Figure 14 Sample ECR Connection](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-22.png)
![SETUPConnecting Power SupplyV200T INSTALLATION GUIDE 23ConnectingPower SupplyNot all configurations and device contexts require the use of a power supply – Verifone ships the power supply unit with the terminal as required.Contact your Verifone representative If you have changed the context in which the terminal is used or have questions about which power supply should be used.Disconnect the power pack cord from the power outlet before connecting a power supply. Connect and route all cables between the terminal, ECR, and PC before plugging the power pack cord into a wall outlet or surge protector.Figure 15 Connecting the Power PackWhen the terminal has power and an application is loaded, the application starts after the initial Verifone copyright screen and displays a unique copyright screen. If no application is loaded, DOWNLOAD NEEDED appears on the display after the initial Verifone copyright screen.CAUTIONUsing an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with VPN PWR470-001-01-A (see Service and Support for detailed power supply specifications).WARNINGDo not plug the power pack into an outdoor outlet or operate the terminal outdoors. Disconnecting power during a transaction can cause transaction data files not yet stored in memory to be lost.NOTEVerifone recommends installing a power surge protector to protect against possible damage caused by lightning strikes and electrical surges.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-23.png)
![SETUPSmart Card Reader24 V200T INSTALLATION GUIDESmart CardReaderThe smart card transaction procedure can vary depending on the application. Verify the proper procedure with your application provider before performing a smart card transaction.Figure 16 Using the Smart Card ReaderConducting a SmartCard TransactionTo conduct a smart card transaction:1Position the smart card with the gold contacts facing upward.2Insert the card into the smart card reader slot in a smooth, continuous motion until it seats firmly.3Remove the card when the display indicates the transaction is completed.Magnetic StripeCard Reader UseThe V200t has a magnetic card reader that uses a triple track stripe reader. This gives the unit greater reliability over a wide range of swipe speeds and operating environments.Figure 17 Using the Magnetic Stripe Card ReaderCAUTIONLeave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-24.png)
![SETUPContactless TransactionsV200T INSTALLATION GUIDE 25Conducting a Credit/Debit CardTransactionTo conduct a credit or debit card transaction:1Position a magnetic card with the stripe facing the keypad.2Swipe it through the magnetic card reader.ContactlessTransactionsThe V200t supports contactless transactions through an integrated contactless module. The terminal only becomes active for contactless smart card transactions when initialized by an application.Figure 18 Contactless TransactionPerformingContactlessTransactionsTo perform a contactless smart card transaction:1Gently tap the card onto or hold the card (within 4 cm) against the surface of the display where the contactless logo appears.2An activated LED visual on the display accompanied by a short beeping sound indicates a successful transaction.See Contactless Considerations for more information.PeriodicInspectionPeriodically inspect the terminal for possible tampering. Signs of tampering may include: •Wires protruding from the device.•Foreign objects inserted into the smart card or mag stripe slot.•Signs of damage to the tamper-evident label.•Warning message on the device display.NOTEIf any device is found in tamper state, please remove it immediately from service. Keep it available for potential forensic investigation, and notify your company security officer and your local Verifone representative or service provider. For more information on contacting Verifone, refer to Service and Support.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-25.png)
![SETUPPeriodic Inspection26 V200T INSTALLATION GUIDE](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-26.png)
![V200T INSTALLATION GUIDE 27CHAPTER 3SpecificationsThis chapter discusses power requirements, dimensions, and other specifications of the V200t terminal.V200t Terminal Refer to the following technical information for the V200t terminal:Unit PowerRequirementsTemperatureHumidityExternalDimensionsWeightMemoryDisplayBattery PackMagnetic CardReader•Operating Power: 8 V DC, 2.25 A•Operating temperature: 0° to 50° C (32° to 122° F) •Storage temperature: -20° to 60° C (-4° to 140° F)•Relative humidity: 5% to 90% (RH non-condensing)•Length: 185 mm (7.3 in)•Width: 78 mm (3.1 in)•Depth: 54 mm (2.1 in)•Unit weight: 274 g (9.66 oz)•384MB (DDR3L: 128MB, NAND Flash: 256MB)•2.8” color TFT 240 (RGB) x 320 (HVGA)•Single-cell 2450 mAH battery pack.•Meets IEEE1725 requirements•EEPROM is included for battery ID•Integrated Booster, Fuel gauge, charger IC and safety circuits inside •Triple track (tracks 1, 2, 3), high coercivity, bi-directional](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-27.png)
![SPECIFICATIONSV200t Terminal28 V200T INSTALLATION GUIDEPrimary Smart CardSAM Card ReaderSIM Card ReaderConnectivitySecurity•ISO 7816-3, 1.8 V, 3 V, 5 V•Synchronous and Asynchronous cards•EMV Approved•Two Security Access Module (SAM) slots•Two Security Access Module (SIM) slots•GSM•GPRS/GSM Class 10•GPRS DL 85.6 kbps, UL 42.8 kbps•GPRS (V200t Plus Only)•GPRS/GSM Class 10•UMTS/HSPA DL 7.2Mbps, UL 5.7Mbps•Bluetooth•BT class 1.5 with up to 100m range as a goal (line of sight)•BT v4.1 integrated•BT v4.2 security connection support by FW update•WiFi•2.4Ghz / 5Ghz frequency channel support•Ethernet RJ45•Speed 10 Base-T /100 Base-TX •Compliant with IEEE802.3 LAN networks.•Dial modem RJ11•V.92 standard supported, line speeds of up to 56 Kbps •USB type-A receptacle•USB2.0 high speed •MOD 10 2-in-1 I/O port•Supports 5 V / 500 mA to external USB device •Total 5 V support is 600 mA•3DES encryption, Master/Session and DUKPT key management•VeriShield file authentication•PCI PED 5.x approved](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-28.png)
![V200T INSTALLATION GUIDE 29CHAPTER 4Troubleshooting GuidelinesThis chapter lists typical malfunctions that may occur while operating a V200t device and the appropriate corrective action. If the problem persists – even after performing the outlined guidelines, or if the problem is not described, contact your local Verifone representative for assistance.Display PanelDoes Not WorkUse the following steps to check the display panel:1Check all the cable connections.2Check the controlling device's AC outlet to be sure the outlet is supplying sufficient power. Substitute the controlling device's power pack with another power pack.3The controlling device's application program might not be loaded correctly. Download the application program and try again.4If the problem persists, contact your local Verifone representative.Keypad DoesNot RespondUse the following steps to check the keypad:1Check the display panel. If there are no characters, or the wrong characters are displayed, refer to Display Panel Does Not Work.2If the problem persists, contact your local Verifone representative.TransactionsFail To ProcessThere are several possible reasons why the unit may not be processing transactions. Use the following steps to troubleshoot failures.Check Magnetic Card Reader•Perform a test transaction using one or more different magnetic stripe cards to ensure the problem is not a defective card.•Ensure that you are swiping cards properly (see Magnetic Stripe Card Reader Use).•Process a transaction manually using the keypad instead of the card reader. If the manual transaction works, the problem may be a defective card reader.NOTEThe V200t device uses a tamper-evident case and contains no user-serviceable parts. Do not, under any circumstance, attempt to disassemble the unit. Perform only those adjustments or repairs specified in this guide. For all other services, contact your local Verifone service provider. Service conducted by parties other than authorized Verifone representatives may void any warranty.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-29.png)
![TROUBLESHOOTING GUIDELINESTransactions Fail To Process30 V200T INSTALLATION GUIDE•If the problem persists, contact your local Verifone representative.Check Smart Card Reader•Perform a test transaction using several different smart cards to ensure the problem is not a defective card.•Ensure that the card is inserted correctly (see Magnetic Stripe Card Reader Use).•Ensure the MSAM cards are properly inserted in the slots and are properly secured (see Installing or Replacing MSAM, Micro SD and SIM Cards).•If the problem persists, contact your local Verifone representative.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-30.png)
![V200T INSTALLATION GUIDE 31CHAPTER 5Service and SupportMaintenanceand CleaningThe V200t device has no user-serviceable parts. Unless otherwise instructed, do not, under any circumstances, attempt any service, adjustments, or repairs on the unit. Disconnect the device before cleaning.To clean the unit, periodically use a clean cloth, slightly dampened with water and a drop or two of mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner. For best results, use a Verifone Cleaning Kit (refer to Accessories and Documentation). Service Returns For V200t equipment failures that cannot be resolved by your help desk or service department, contact one of the following hotlines for product service and repair information:•USA – Verifone Service and Support Group, 1-800-834-9133, Monday - Friday, 8 A.M. - 7 P.M., EST•International – Contact your Verifone representative Before returning V200t unit to Verifone, you must obtain a Merchandise Return Authorization (MRA) number. The following procedure describes how to return one or more V200t for repair or replacement (U.S. customers only). 1Gather the following information from the printed labels on the bottom of each V200t device to be returned:•Product ID, including the model and part number. For example, “M470-xxx-xx-xxx-x”•Serial number (S/N xxx-xxx-xxx)2Within the United States, call Verifone toll-free at 1-800-834-9133.CAUTIONNever use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic or rubber parts.Because the V200t can be damaged by liquid, do not spray cleaners or other solutions directly onto the keypad or display. Always apply the cleaner to a cloth before cleaning the device.NOTEInternational customers, please contact your local Verifone representative for assistance with your service, return, or replacement.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-31.png)
![SERVICE AND SUPPORTService Returns32 V200T INSTALLATION GUIDE3Select the MRA option from the automated message. The MRA department is open Monday–Friday, 8 A.M.–7 P.M., EST.4Give the MRA representative the information gathered in Step 1.If the list of serial numbers is long, you can fax the list, along with the information gathered in Step 1, to the MRA department at 1-727-953-4172 (U.S.)•Please address the fax clearly to the attention of the“Verifone MRA Dept.”•Include a telephone number where you can be reached, as well as your fax number.•You will be issued MRA number(s) and the fax will be returned to you. 5Describe the problem(s).6Provide the shipping address where the repaired or replacement unit must be returned.7Keep a record of the following items:•Assigned MRA number(s).•The serial number assigned to the V200t device (located at the bottom of the unit.•Shipping documentation, such as air bill numbers, used to trace the shipment.•Model(s) returned (model numbers are located on the bottom of the unit).Figure 19 Model ID LocationNOTEOne MRA number must be issued for each V200t unit you return to Verifone, even if you are returning several of the same model.MODEL ID](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-32.png)
![SERVICE AND SUPPORTAccessories and DocumentationV200T INSTALLATION GUIDE 33Accessories andDocumentationVerifone produces accessories and documentation for the V200t. When ordering, please refer to the part number in the left column. •Verifone Online Store at www.store.verifone.com•USA – Verifone Customer Development Center, 1-800-Verifone (837-4366) Monday - Friday, 7 A.M. - 5 P.M., MST •International – Contact your Verifone representative Cables Contact your local Verifone distributor to determine which cable fits your needs.Power SupplyBattery PackAccessoriesDocumentationCBL159-312-01-A LAN cable for Ethernet connections (CAT5, 2.0 m).CBL000-051-02-A RJ9 to DB9 cableCBL470-006-02-A Multi-port coiled cable 26264-01-R Cash register cable, RJ45-SUBD9f, 1.0 m.26264-02-R Cash register cable, RJ45-SUBD9f, 2.0 m.PWR470-001-01-A Power pack (100-240 V AC Input; 8 V DC, 2.25 A, 18 W Output)BPK470-001-01-A Battery pack (8 V DC, 800 mA, 6.4 Wh)02746-01 Verifone Cleaning KitDOC470-101-EN V200t Certifications and RegulationsDOC470-102-EN V200t Quick Installation GuideDOC470-104-EN V200t Reference Guide](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-33.png)
![SERVICE AND SUPPORTAccessories and Documentation34 V200T INSTALLATION GUIDE](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-34.png)
![V200T INSTALLATION GUIDE 35APPENDIX ACaution andWarningMessagesProducts with UL/cUL certification should include French translations of Caution and Warning notices. The following table lists all notices found in the document, their location, and the equivalent French translations.Table 4 Caution and Warning MessagesNotice Chapter Page English Text French TextWarning Setup page 13For safety, do not string cables or cords across a walkway.Par mesure de sécurité, ne pas les câbles de chaîne ou de cordons à travers une passerelle.Caution Setup page 14This unit is not waterproof or dustproof, and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty.Cet appareil n'est pas étanche ou à la poussière, et est destiné à une utilisation en intérieur. Tout dommage à l'unité de l'exposition à la pluie ou à la poussière peut annuler la garantie.Warning Setup page 14Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon signs, highfrequency or magnetic security devices, or electric motors).Du fait d'un risque d'électrocution ou d'une détérioration du terminal, ne pas utiliser cet équipement près d'une source d'eau, par exemple près d'une baignoire, d'un lavabo, d'un évier de cuisine ou d'un bac de lavage, dans un sous-sol humide ou à proximité d'une piscine. De même, éviter d’utiliser ce produit lors des orages provoquant des coupures électriques.Éviter de placer le terminal à proximité d’appareils électriques ou autres unités pouvant entraîner des fluctuations de tension importantes ou des interférences électriques, tels que les climatiseurs, enseignes au néon, dispositifs de sécurité à haute fréquence ou équipements électriques.Caution Setup page 14, Using an enclosed metal frame or mount may negatively affect contactless performance.L'utilisation d'un cadre métallique fermé ou de montage peut affecter négativement contact performance.Warning Setup page 16Do not use a unit that has been tampered with or otherwise damaged. This unit comes equipped with tamper-evident label. If a label or component appears damaged, immediately notify the shipping company and your Verifone representative or service provider.Ne pas utiliser un appareil qui a été altéré ou endommagé. Cet appareil est équipé d'étiquette d'inviolabilité. Si une étiquette ou d'un composant semble être endommagé, en aviser immédiatement la compagnie maritime et votre représentant Verifone ou prestataire de services.](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-35.png)
![Caution and Warning Messages36 V200T INSTALLATION GUIDECaution Setup page 16Observe standard precautions in handling electrostatically sensitive devices. Electrostatic discharges can damage the equipment. Verifone recommends using a grounded anti-static wrist strap.Respecter les précautions standard dans la manipulation d'appareils sensibles aux décharges électrostatiques. Les décharges électrostatiques peuvent endommager le matériel. Verifone recommande d'utiliser un bracelet anti-statique à la terre.Caution Setup page 23Using an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with VPN DOC470-001-01-A.L'utilisation d'une alimentation incorrecte peut endommager l'appareil ou ne pas fonctionner correctement. Utilisez uniquement un bloc d'alimentation avec VPN DOC470-001-01-A.Caution Setup page 23Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Disconnecting power during a transaction can cause transaction data files not yet stored in memory to be lost.Ne branchez pas le bloc d'alimentation dans une prise extérieure ou n'utilisez pas le terminal à l'extérieur. La déconnexion de l'alimentation pendant une transaction peut entraîner la perte des fichiers de données de transaction qui ne sont pas encore stockés dans la mémoire.Caution Setup page 24Leave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction.Laissez la carte à puce dans le lecteur de carte jusqu'à ce que la transaction soit terminée. Le retrait prématuré peut annuler la transaction.Caution Service and Supportpage 31Never use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic or rubber parts. Because this device can be damaged by liquid, do not spray cleaners or other solutions directly onto the keypad or display. Always apply the cleaner to a cloth before cleaning the device.N'utilisez jamais de diluant, le trichloréthylène ou des solvants cétoniques - ils peuvent détériorer les pièces en plastique ou en caoutchouc. Parce que cet appareil peut être endommagé par un liquide, ne pas vaporiser de nettoyage ou d'autres solutions directement sur le clavier ou l'écran. Toujours appliquer le nettoyant sur un chiffon avant de nettoyer l'appareil.Table 4 Caution and Warning Messages (continued)Notice Chapter Page English Text French Text](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-36.png)
![Caution and Warning MessagesV200T INSTALLATION GUIDE 37](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-37.png)
![V200tInstallation GuideVerifone Part Number DOC470-003-EN-A, Revision AVerifone, Inc.1-800-Verifonewww.verifone.com](https://usermanual.wiki/Verifone/V200T2GDE.DOC470-003-EN-A-V200t-Installation-Guide/User-Guide-3824674-Page-38.png)