Verifone P400 Point of Sale Terminal User Manual

VeriFone Inc Point of Sale Terminal

Contents

Users Manual

Verifone Part Number DOCXXX-00X-EN-A, Revision A.3VERIFONECONFIDENTIALP400/P400 PLUSInstallation Guide
All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written permission of Verifone, Inc.The information contained in this document is subject to change without notice. Although Verifone has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are for illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample program before placing the software into productive use. This document, including without limitation the examples and software programs, is supplied “As-Is.”Verifone Inc.1-800-Verifonewww.verifone.comVerifone Part Number DOCXXX-00X-EN-A, Revision A.3P400/P400 PLUS Installation Guide© 2015 Verifone, Inc.Verifone and the Verifone logo, are registered trademarks of Verifone. Other brand names or trademarks associated with Verifone’s products and services are trademarks of Verifone, Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Comments? Please e-mail all comments on this document to your local Verifone Support Team.
P400/P400 PLUS INSTALLATION GUIDE 3VERIFONECONFIDENTIAL CONTENTSPREFACE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Guide Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Acronym Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6CHAPTER  1Overview P400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Front Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Back Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Features and Benefits  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9CHAPTER  2Setup Selecting Location  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Electrical Considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Contactless Considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Ensuring User Privacy  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Unpacking Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13MSAM/MicroSD Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Changing or Installing MSAMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Changing or Installing a MicroSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Attaching a Cable Connector to the  P400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Connection to Another Verifone Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . 15RS-232 Connection Using an External Power Brick. . . . . . . . . . . . . . . . . . . 15Direct USB Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15USB–Download Support using an External Power Brick . . . . . . . . . . . . . . . 16Ethernet Connection with External Power Brick . . . . . . . . . . . . . . . . . . . . . . 16Smart Card Reader Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Magnetic Card Reader Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Contactless Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Privacy Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Stylus and Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Mounting Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Mounting P400 to a Flat Surface (Without a Mounting Adapter)  . . . . . . . . . 19Mounting P400 with Mounting Adapter to a Vertical Bracket . . . . . . . . . . . . 19CHAPTER  3Specifications Unit Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
 4P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21External Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Primary Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21SAM Card Reader  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22CHAPTER  4Troubleshooting Guidelines Display Panel Does Not Work  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Transactions Fail To Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23CHAPTER  5Service and Support Maintenance and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Service Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Privacy Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Cleaning Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27APPENDIX  A P400 Caution and Warning Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
VERIFONECONFIDENTIAL P400/P400 PLUS INSTALLATION GUIDE 5PREFACE This guide is the primary source of information for setting up and installing a P400 device.Audience This guide provides simple descriptions of the P400 features, as well as basic information for installing and configuring the P400.Organization This guide is organized as follows:Chapter 1, Overview. Provides an overview of a P400 device.Chapter 2, Setup. Explains how to set up and install the P400, as well as to establish connections with other devices.Chapter 3, Specifications. Discusses the power requirements and dimensions of P400.Chapter 4, Troubleshooting Guidelines. Provides troubleshooting tips.Chapter 5, Service and Support. Provides information on contacting your Verifone service provider, ordering accessories or documentation from Verifone, and maintaining the P400 unit.Appendix A, P400 Caution and Warning Messages. Shows the UL/cUL certification-compliant translations of all Warning and Caution messages in this installation guide.Related DocumentationTo learn more about the P400 device, please refer to the following documents and their associated Verifone Part Numbers (VPN):P400 Certifications and Regulations VPN DOC435-001-ENP400 Quick Installation Guide VPN DOC435-002-EN
PREFACE Guide Conventions6P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL Guide ConventionsPlease refer to the following document conventions for quickly identifying special formatting. Table 1 describes these conventions and provides examples of their use.Table 1 Document ConventionsConvention Meaning ExampleBlue Text in blue indicates terms that are cross-references.See Guide Conventions.Italics Italic typeface indicates book titles or emphasis.You must not use this unit underwater.NOTEThe pencil icon is used to highlight important information.RS-232-type devices do not work on the P400 communication port.CAUTIONThe caution symbol indicates hardware or software failure, or loss of data.The unit is not waterproof or dustproof, and is intended for indoor use only.WARNINGThe lightning symbol is used as a warning when bodily injury might occur.Due to risk of shock do not use the unit near water.Acronym DefinitionsPlease refer to Table 2 for the acronyms used in this manual. Table 2 Acronym Definitions Acronym Definitions3DES Triple Data Encryption AlgorithmAC Alternating CurrentANSI American National Standards InstitutecUL Underwriters' Laboratories of CanadaDC Direct CurrentDUKPT Derived Unique Key Per Transaction Method as defined in the VISA’s POS Equipment Requirement: PIN processing and Data Authentication, International Version 1.0, August 1988ECR Electronic Cash RegisterEMV Europay, MasterCard, and VisaISO International Organization for StandardizationMRA Merchandise Return AuthorizationMSAM Multiple Secure Access ModuleLAN Local Area NetworkLCD Liquid Crystal DisplayLED Light-Emitting DiodePED PIN Entry Device
PREFACE Guide ConventionsP400/P400 PLUS INSTALLATION GUIDE 7VERIFONECONFIDENTIAL PIN Personal Identification NumberPOS Point-of-SaleRS-232 Recommend Standard number 232SAM Secure Access ModuleUL Underwriters LaboratoriesUSB Universal Serial BusVPN Verifone Part NumberTable 2 Acronym Definitions  (continued)Acronym Definitions
PREFACE Guide Conventions8P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL
VERIFONECONFIDENTIAL P400/P400 PLUS INSTALLATION GUIDE 9CHAPTER 1OverviewThis chapter provides the description and enumeration of features for the P400.P400 The P400 is Verifone’s next generation integrated retail PINpad device. Its touchscreen functionality and sophisticated design is perfect for high-end retail establishments.Although the P400 is a consumer facing handheld device, it can also be fix mounted in some integrated retail scenarios. Given this, the product’s design is equally appealing as a handheld PINpad and robust enough to look and function appropriate in a fixed mount setting. Front Functions The P400 includes the following features:•Capacitive touch LCD display•Secure keypad supporting 3x5 matrix containing 0-9, *, #, Cancel, Backspace/Clear, and Enter keys.•Supports telco-style format•Dual-function Backspace/Clear key.•Customer-entry for Cancel and Enter keys.Back Functions The rear of the P400 device shows the following:•Cable connector compartment.•Threaded grommets for attaching the wall mount adapter.•A uSD and a dual-stack MSAM connectors built into the back of the unit to support stored-value card programs or other merchant card requirements.Features and Benefits Exceptional Ease of Use and Ergonomics•Sleek and stylish shape occupies minimal counter space.•Bold, ergonomic design fits comfortably in the palm of a hand.•Large, hard-rubber keys provide improved tactile feedback, minimizing errors and maximizing ease-of-use for consumers of all ages.•Intuitive telco-style interface and colored control keys simplify training and reduce support requests.•320 (RGB) x 480 TFT (HVGA) display with a capacitive touch panel.•Rugged and reliable design.
OVERVIEW Features and Benefits10 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL •Connects with most POS payment terminals.•Supports payment transactions in a variety of payment environments.Critical Security Protection•Offers a choice of Master/Session or DUKPT key-management methods to protect PIN-based transactions.•Offers secure, reliable PIN input for expanding range of PIN-based transactions.•PCI-compliant for secure solutions, meeting the PED standard.•Meets ISO and ANSI standards for PIN encryption, key management, and MAC.•Key injection simplified and secured with Verifone’s SecureKit key loading software.•Rugged and reliable design absorbs hard knocks found at point-of-sale counters.•Removable privacy shield offers option of supplemental physical security.•Connects with most POS payment terminals, PCs, and ECRs.•USB Connectivity that gives another option to connect with payment terminals, personal computers, and electronic cash registers (ECRs).
VERIFONECONFIDENTIAL P400/P400 PLUS INSTALLATION GUIDE 11CHAPTER 2SetupThis chapter describes the setup procedure for the P400, in the following sections:•Selecting Location•PIN Protection Measures•Unpacking Shipping Carton•MSAM/MicroSD Cards•Power Supply•Cable Connections•Smart Card Reader Use•Magnetic Card Reader Use•Contactless Transactions•Optional AccessoriesSelecting LocationUse the following guidelines to select the best location for the P400 device.To Select a LocationChoose a location convenient for both merchant and client:•Far from heavy metal objects,•A flat support surface---such as a countertop or table,•Near a power outlet and the terminal or computer that connects to the P400. For safety, do not string cables or cords across a walkway.Environmental Factors •Do not use the unit where there is high heat, dust, humidity, moisture, or caustic chemicals or oils.•Keep the unit away from direct sunlight and anything that radiates heat, such as a stove or a motor.•Do not use the P400 outdoors. The P400 is not waterproof or dustproof, and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty. WARNINGCAUTION
SETUP PIN Protection Measures12 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL Electrical Considerations •Avoid using this product during electrical storms.•Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, electric motors, neon signs, high-frequency or magnetic security devices, or computer equipment).•Do not use the P400 unit in water or in moist conditions.•Disconnect the device from its POS terminal before cleaning.Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon signs, highfrequency or magnetic security devices, or electric motors).Contactless Considerations Avoid having metallic objects in proximity of the contactless antenna. If you need to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic mounting plate.Using an enclosed metal frame or mount may negatively affect contactless performancePIN Protection MeasuresUse the following techniques to provide effective screening of PIN-entry devices (PEDs) during the PIN entry process. You can use these methods in combination, although in some cases a single method might suffice.•Position the terminal on the check-in stand in such a way as to block visual observation of the PIN-entry process. Examples include:•Visual shields designed into the check-in stand. The shields may be solely for shielding purposes, or may be part of the general check stand design.•Position the PED so that it is angled in such a way that PIN spying is difficult.•Install the PED on an adjustable stand that allows consumers to swivel the terminal sideways and/or tilt it forwards/backwards to a position that makes visual observation of the PIN-entry process difficult.•Position in-store security cameras so that the PIN-entry keypad is not visible.WARNINGCAUTION
SETUP Unpacking Shipping CartonP400/P400 PLUS INSTALLATION GUIDE 13VERIFONECONFIDENTIAL The following table describes the two preferred mounting methods and the recommended measures to protect from PIN capture in four observation corridors:Table 3 Mounting Methods and Protection MeasuresMethod Cashier Customer in Queue Customers Elsewhere On-site CamerasPINpad without stand Use signage behind the PEDInstall so that customer is between PED and next in queueNo action needed Do not install within view of camerasPINpad with stand No action needed Install so that customer is between PED and next in queueNo action needed Do not install within view of camerasVerifone also recommends instruction of the cardholder regarding safe PIN-entry. This can be done with a combination of:•Signage on the PED•Prompts on the display, possibly with a click-through screen•Literature at the point of sale•A logo for safe PIN-entry process.Ensuring User PrivacyUse the following guidelines to protect the user’s privacy when he enters his personal identification number (PIN):•The area of visibility should be no larger than a cone taken from the number 5 key at an angle of 45° and covering an area of 270° directly in front of the user.•You can secure PIN entry by installing a Privacy Shield.Unpacking Shipping CartonCarefully inspect the shipping carton and its contents for possible tampering or damage. This device is a secure product and any tampering can cause it to cease to function or operate in an unsecured manner.1Remove the P400 unit from the shipping carton. The standard package contains the PIN pad only and does not include any other cables or accessories. Refer to Accessories and Documentation for more information about P400 related accessories. 2Remove any protective plastic wrap and place the unit on a table or countertop.3Remove the clear protective film from the display.CAUTION
SETUP MSAM/MicroSD Cards14 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL 4Replace all the packing materials, close the lid, and save the carton for repacking or moving the P400 unit in the future. Do not use a unit that has been tampered with or otherwise damaged. This unit comes equipped with tamper-evident label. If a label or component appears damaged, immediately notify the shipping company and your Verifone representative or service provider. MSAM/MicroSD CardsYou may need to install one or more multiple security access module (MSAM) cards or replace the old cards.Observe standard precautions in handling electrostatically sensitive devices. Electrostatic discharges can damage the equipment. Verifone recommends using a grounded anti-static wrist strap.Changing or Installing MSAMs To change or install MSAM:1Place the terminal face down on a soft and clean surface to protect the lens from scratches.2Slide out and lift the compartment cover. The MSAM cardholders are now accessible.The P400 supports two MSAM cards in a stacked configuration.3Install the MSAM card by carefully sliding it into the slot until fully inserted.Align in the same direction as the MSAM symbol shown on the compartment case. Insert the MSAM card with the card’s gold contacts facing away from you, toward the unit. Changing or Installing a MicroSD CardTo change or install MicroSD card:1Follow steps 1-2 in the Changing or Installing MSAMs section to open the terminal compartment door.2Insert the MicroSD card directly into the slot across the MSAM card holders.Power SupplyNot all P400 configurations and device contexts require the use of a power supply – Verifone ships power supply with the terminal as required.Contact your Verifone representative If you have changed the context in which the terminal is used or have questions about which power supply should be used.Using an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with VPN PWR435-001-XX-X (see Specifications for detailed power supply specifications).WARNINGCAUTIONNOTENOTECAUTION
SETUP Cable ConnectionsP400/P400 PLUS INSTALLATION GUIDE 15VERIFONECONFIDENTIAL Disconnect the power pack cord from the power outlet before connecting a power supply. Connect and route all cables between the terminal, ECR, and PC before plugging the power pack cord into a wall outlet or surge protector.Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Disconnecting power during a transaction can cause transaction data files not yet stored in memory to be lost.Verifone recommends installing a power surge protector to protect against possible damage caused by lightning strikes and electrical surges.When the terminal has power and an application is loaded, the application starts after the initial Verifone copyright screen and displays a unique copyright screen. If no application is loaded, DOWNLOAD NEEDED appears on the display after the initial Verifone copyright screen.Cable ConnectionsThe P400 has seven general cabling scenarios, depending on what it connects to:1Connection to Another Verifone Terminal2RS-232 Connection Using an External Power Brick3Direct USB Connection4USB–Download Support using an External Power Brick5USB Connection via PoweredUSB Connection Cable6Ethernet Connection with External Power BrickTurn off or unplug the terminal when connecting or disconnecting the device to avoid device memory corruption and data loss.Refer to the controlling device instructions for any terminal-specific warnings.Attaching a Cable Connector to the P400Before going into each cabling scenario, the cables first have to be attached to the P400. To attach a cable to the terminal, follow steps 1-2 in the Changing or Installing MSAMs section to open the compartment door then attach the 28 pin connector of the cable to the terminal.Connection to Another Verifone TerminalThe P400 connects to a Verifone terminal via a coiled cable  (VPN - CBL282-036-01-A). There is a minimum power requirement for the terminal, currently specified at 4.7 W. In cases where the terminal is only able to provide 5 V DC output to power the P400, the terminal must be able to source at least 940 mA of current. Otherwise, the device may not function properly.WARNINGNOTEWARNINGNOTE
SETUP Cable Connections16 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL RS-232 Connection Using an External Power BrickA special dongle cable is used, where one end of the cable plugs into the P400 while the other end terminates in a DB-9 connector housing. On the housing, a DC jack is provided to connect to an external power brick. This is a generic cable for all RS-232-based hosts (VPN - CBL282-031-XX-A).Direct USB Connection Similarly, a USB cable (VPN - CBL282-038-XX-A) is required in standard USB environments. For this cable option, the host end has a molded housing which exposes the standard USB plug.USB–Download Support using an External Power BrickThe P400 can connect to other devices via USB while still being connected to an external power brick through the following cable configurations:USB Connection via Junction Box CableThis cable option (VPN - CBL282-044-01-B) comes with a junction box that provides a mini-style Type B USB socket for connecting to the USB-based host and a DC jack for external power connection. In addition, a Type A USB socket is provided on the junction box to support application download via a USB thumb drive.USB Connection via PoweredUSB Connection CableA PoweredUSB cable allows for devices to obtain power through their USB host instead of requiring an independent power supply or external AC adapter. Connect the cable (VPN - CBL282-033-01-A) to the P400 and plug the male USB connector into the corresponding USB port of the connecting device.There are two variants of PoweredUSB, one with 12 V DC output and another with 24 V DC. P400 only supports 12 V DC option.Power Sequence in USB ConnectionWhen the unit connected is a USB Host, ensure that it is powered on prior to connecting the USB Device.Incorrect power sequence may degrade the SoC Host port.Ethernet Connection with External Power BrickTo connect the terminal to other devices via ethernet, use the cable with a junction box that provides a standard RJ-45 LAN socket, a mini USB port, and a standard DC jack for an external power connection.NOTEWARNING
SETUP Smart Card Reader UseP400/P400 PLUS INSTALLATION GUIDE 17VERIFONECONFIDENTIAL The junction box comes in these configurations:Cable Configuration Part NumberEthernet with RS232  Junction box with RJ-45 socket (for connecting PINPad to LAN infrastructure), Mod-10 socket & DC-in jackCBL282-006-01-BEthernet with RS232 and Mini USB optionJunction box with RJ-45 socket (for connecting PINPad to LAN infrastructure), Type B socket, Mini USB & DC-in jackCBL282-005-01-BEthernet with RS232 and Mini USB optionJunction box with RJ-45 socket (for connecting PINPad to LAN infrastructure), Type B socket, Mini USB, type A USB & DC-in jackCBL282-044-01-BSmart Card Reader UseThe smart card transaction procedure can vary depending on the application. Verify the proper procedure with your application provider before performing a smart card transaction.Conducting a Smart Card Transaction To conduct a smart card transaction:1Position the smart card with the gold contacts facing upward.2Insert the card into the smart card reader slot in a smooth, continuous motion until it seats firmly.3Remove the card when the display indicates the transaction is completed.Leave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction.Magnetic Card Reader Use The P400 has a magnetic card reader that uses a triple track stripe reader. This gives the unit greater reliability over a wide range of swipe speeds and operating environments.Conducting a Credit/Debit Card TransactionTo conduct a credit or debit card transaction:1Position a magnetic card with the stripe facing the keypad.2Swipe it through the magnetic card reader.Contactless TransactionsThe P400 supports contactless transactions through an integrated contactless module. The terminal only becomes active for contactless smart card transactions when initialized by an application.CAUTION
SETUP Optional Accessories18 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL Performing Contactless TransactionsTo perform a contactless smart card transaction:1Gently tap the card onto or hold the card (within 4 cm) against the surface of the display.2An activated LED visual on the display accompanied by a short beeping sound indicates a successful transaction.Optional AccessoriesThese accessories can be used to further enhance the device’s functionality. See Accessories and Documentation for additional information.Privacy ShieldThe privacy shield is used to hide the keys when entering user password in a transaction.Installing the Privacy Shield To install a privacy shield:1Align the hooks on the privacy shield with the corresponding slots beside the keypad on the terminal.2Once the hooks are in place, gently push down on the privacy shield until it snaps into place.Stylus and Holder A stylus with holder can be attached to P400 and used as an alternative device input method.Attaching the Stylus Holder To attach the stylus:1Align the stylus holder’s screw holes with those found on the back of  the terminal.2Screw the holder onto the back of the terminal as shown in the illustration below:Mounting AdapterThis accessory is used to mount P400 to vertical or inclined surfaces. Attaching a Mounting Adapter to P400 To attach a mounting adapter to P400:1Align the screw holes at the back of the terminal with the corresponding screws on the mounting adapter (this can be done with or without the stylus holder attached).2Screw the mounting adapter in place while keeping the terminal aligned with the mounting adapter.Mounting P400 with Mounting Adapter to a Wall or Flat SurfaceTo mount the terminal to a wall or flat surface:1Ensure the mounting adapter is attached to the terminal.2Attach three M3 screws (not included in P400 package) to the desired surface. Make sure that they are aligned with the slots on top and at the bottom of the mounting adapter.
SETUP Optional AccessoriesP400/P400 PLUS INSTALLATION GUIDE 19VERIFONECONFIDENTIAL 3Secure the terminal with the mounting adapter in place by aligning the holes to the M3 screws then sliding the entire assembly into place.4Slide the terminal down to secure it to the mounting plate. To remove the terminal, slide the terminal up and pull away from the mounting plate.Mounting P400 to a Flat Surface (Without a Mounting Adapter)To mount the terminal to a flat surface:1Align the terminal's footers to the holes on the mounting plate.2Fit the footers of the terminal into the footer holes.3Screw the mounting plate in place.Customized plates must have four recessed areas big enough to fit the footers of the terminal. This ensures that there is no gap between the terminal and mounting plate.Mounting P400 with Mounting Adapter to a Vertical BracketTo mount the terminal with a mounting adapter to a vertical bracket:1Ensure the mounting adapter is attached to the terminal.2Align the three screw holes of the mounting adapter with the vertical bracket holes.3Screw the vertical bracket in place.Mounting ConsiderationsAvoid having metallic objects in proximity to the contactless antenna. If you need to mount the terminal to vertical or inclined surfaces, use a flat mounting plate.An enclosed metal frame or mount may negatively affect CTLS performance.NOTECAUTION
SETUP Optional Accessories20 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL
VERIFONECONFIDENTIAL P400/P400 PLUS INSTALLATION GUIDE 21CHAPTER 3SpecificationsThis chapter discusses power requirements, dimensions, and other specifications of the P400 device.Unit Power RequirementsP400•5-12 V DC, 500 mAP400 PLUS•5-12 V DC, 1 ATemperature •Operating temperature: 0° to 50° C (32° to 122° F) •Storage temperature: -20° to 60° C (-4° to 140° F)Humidity •Relative humidity: 5% to 90% (RH non-condensing)External Dimensions •Length: 166.70 mm (6.56 in)•Width: 79.60 mm (3.13 in)•Depth: 42.30 mm (1.67 in)Weight •Unit weight: 274 g (9.66 oz)Processor •ARM Cortex A9 32-bit processorDisplay •3.5” portrait mode transmissive TFT 320 (RGB) x 480 (HVGA)Magnetic Card Reader •Triple track (tracks 1, 2, 3), high coercivity, bi-directionalPrimary Smart Card •ISO 7816-3, 1.8 V, 3 V, 5 V•Synchronous and Asynchronous cards•EMV Approved
SPECIFICATIONS SAM Card Reader22 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL SAM Card Reader •Two Security Access Modules (SAMs)Security •3DES encryption, Master/Session and DUKPT key management•VeriShield file authentication•PCI PED 4.0 approved
VERIFONECONFIDENTIAL P400/P400 PLUS INSTALLATION GUIDE 23CHAPTER 4Troubleshooting GuidelinesThis chapter lists typical malfunctions that may occur while operating a P400 device and the appropriate corrective action. If the problem persists – even after performing the outlined guidelines, or if the problem is not described, contact your local Verifone representative for assistance.The P400 device uses a tamper-evident case and contains no user-serviceable parts. Do not, under any circumstance, attempt to disassemble the unit. Perform only those adjustments or repairs specified in this guide. For all other services, contact your local Verifone service provider. Service conducted by parties other than authorized Verifone representatives may void any warranty.Display Panel Does Not WorkUse the following steps to check the display panel:1Check all the cable connections.2Check the controlling device's AC outlet to be sure the outlet is supplying sufficient power. Substitute the controlling device's power pack with another power pack.3The controlling device's application program might not be loaded correctly. Download the application program and try again.4If the problem persists, contact your local Verifone representative.Keypad Does Not RespondUse the following steps to check the keypad:1Check the display panel. If there are no characters, or the wrong characters are displayed, refer to Display Panel Does Not Work.2If the problem persists, contact your local Verifone representative.Transactions Fail To ProcessThere are several possible reasons why the unit may not be processing transactions. Use the following steps to troubleshoot failures.Check Magnetic Card Reader•Perform a test transaction using one or more different magnetic stripe cards to ensure the problem is not a defective card.•Ensure that you are swiping cards properly (see Magnetic Card Reader Use).•Process a transaction manually using the keypad instead of the card reader. If the manual transaction works, the problem may be a defective card reader.•If the problem persists, contact your local Verifone representative.NOTE
TROUBLESHOOTING GUIDELINES Transactions Fail To Process24 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL Check Smart Card Reader•Perform a test transaction using several different smart cards to ensure the problem is not a defective card.•Ensure that the card is inserted correctly (see Magnetic Card Reader Use).•Ensure the MSAM cards are properly inserted in the slots and are properly secured (see MSAM/MicroSD Cards).•If the problem persists, contact your local Verifone representative.
VERIFONECONFIDENTIAL P400/P400 PLUS INSTALLATION GUIDE 25CHAPTER 5Service and SupportMaintenance and CleaningThe P400 device has no user-serviceable parts. Unless otherwise instructed, do not, under any circumstances, attempt any service, adjustments, or repairs on the unit. Disconnect the device before cleaning.To clean the unit, periodically use a clean cloth, slightly dampened with water and a drop or two of mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner. For best results, use a Verifone Cleaning Kit (refer to Accessories and Documentation). Never use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic or rubber parts.Because the P400 can be damaged by liquid, do not spray cleaners or other solutions directly onto the keypad or display. Always apply the cleaner to a cloth before cleaning the device. Service Returns For P400 equipment failures that cannot be resolved by your help desk or service department, contact one of the following hotlines for product service and repair information:•USA – Verifone Service and Support Group, 1-800-834-9133,  Monday - Friday, 8 A.M. - 7 P.M., EST•International – Contact your Verifone representative Before returning P400 unit to Verifone, you must obtain a Merchandise Return Authorization (MRA) number. The following procedure describes how to return one or more P400 for repair or replacement (U.S. customers only). International customers, please contact your local Verifone representative for assistance with your service, return, or replacement. 1Gather the following information from the printed labels on the bottom of each P400 device to be returned:•Product ID, including the model and part number. For example,  “M180-08x-xx-xxx-x”•Serial number (S/N xxx-xxx-xxx)2Within the United States, call Verifone toll-free at 1-800-834-9133.CAUTIONNOTE
SERVICE AND SUPPORT Accessories and Documentation26 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL 3Select the MRA option from the automated message. The MRA department is open Monday–Friday, 8 A.M.–7 P.M., EST.4Give the MRA representative the information gathered in Step 1. If the list of serial numbers is long, you can fax the list, along with the information gathered in Step 1, to the MRA department at 1-727-953-4172 (U.S.)•Please address the fax clearly to the attention of the “Verifone MRA Dept.”•Include a telephone number where you can be reached, as well as your fax number.•You will be issued MRA number(s) and the fax will be returned to you. One MRA number must be issued for each P400 unit you return to Verifone, even if you are returning several of the same model. 5Describe the problem(s).6Provide the shipping address where the repaired or replacement unit must be returned.7Keep a record of the following items:•Assigned MRA number(s).•The serial number assigned to the P400 device (located at the bottom of the unit.•Shipping documentation, such as air bill numbers, used to trace the shipment.•Model(s) returned (model numbers are located on the bottom of the unit).Accessories and DocumentationVerifone produces accessories and documentation for the P400. When ordering, please refer to the part number in the left column. •Verifone Online Store at www.store.verifone.com•USA – Verifone Customer Development Center, 1-800-Verifone (837-4366) Monday - Friday, 7 A.M. - 5 P.M., MST •International – Contact your Verifone representative NOTE
SERVICE AND SUPPORT Accessories and DocumentationP400/P400 PLUS INSTALLATION GUIDE 27VERIFONECONFIDENTIAL Cables Contact your local Verifone distributor to determine which cable fits your needs.CBL282-045-XX-A USB cable (as Device). Powered from +9 V/1 A DC adaptorCBL282-038-XX-A USB cable (as Device). Powered from +5 V USB Host.CBL282-033-XXA PoweredUSB cable (as Device). Powered from +12 V PUSB HostCBL282-031-XX-A RS-232 cable (DB9). Powered from +12 V DC adaptor.CBL282-036-XX-A RS-232 cable (RJ45). Powered from Countertop (+12 V).CBL282-006-01-B Ethernet with RS232CBL282-005-01-B Ethernet with RS232 and Mini USBCBL282-044-01-B Ethernet with RS232 and Mini USBPower Supply PWR435-001-01-A  DC power pack (US)PWR435-001-02-A DC power pack (UK)PWR435-001-03-A DC power pack (EU)PWR435-001-04-A DC power pack (China)PWR435-001-05-A DC power pack (Brazil)PWR435-001-06-A DC power pack (Australia)PWR435-001-07-A DC power pack (South Africa)Privacy Shield PPLxxx-xxx-xx-x Optional privacy shieldWall Mount  PPLxxx-xxx-xx-x Optional wall mount adapterCleaning Kit 02746-01 Verifone Cleaning KitDocumentation DOCxxx-xxx-EN P400 Certifications and RegulationsDOCxxx-xxx-EN P400 Quick Installation Guide
SERVICE AND SUPPORT Accessories and Documentation28 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL
VERIFONECONFIDENTIAL P400/P400 PLUS INSTALLATION GUIDE 29APPENDIX AP400 Caution and Warning MessagesProducts with UL/cUL certification should include French translations of Caution and Warning notices. The following table lists all notices found in the document, their location, and the equivalent French translations.Table 4 Caution and Warning Messages Notice Chapter Page English Text French TextWarning Setup page 11For safety, do not string cables or cords across a walkway.Par mesure de sécurité, ne pas les câbles de chaîne ou de cordons à travers une passerelle.Caution Setup page 11This unit is not waterproof or dustproof, and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty.Cet appareil n'est pas étanche ou à la poussière, et est destiné à une utilisation en intérieur. Tout dommage à l'unité de l'exposition à la pluie ou à la poussière peut annuler la garantie.Caution Setup page 12, page 19Using an enclosed metal frame or mount may negatively affect contactless performance.L'utilisation d'un cadre métallique fermé ou de montage peut affecter négativement contact performance.Warning Setup page 12Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon signs, highfrequency or magnetic security devices, or electric motors).Du fait d'un risque d'électrocution ou d'une détérioration du terminal, ne pas utiliser cet équipement près d'une source d'eau, par exemple près d'une baignoire, d'un lavabo, d'un évier de cuisine ou d'un bac de lavage, dans un sous-sol humide ou à proximité d'une piscine. De même, éviter d’utiliser ce produit lors des orages provoquant des coupures électriques.Éviter de placer le terminal à proximité d’appareils électriques ou autres unités pouvant entraîner des fluctuations de tension importantes ou des interférences électriques, tels que les climatiseurs, enseignes au néon, dispositifs de sécurité à haute fréquence ou équipements électriques.Caution Setup page 13This device is a secure product and any tampering can cause it to cease to function or operate in an unsecured manner.Cet appareil est un produit sûr et toute manipulation peut l'amener à cesser de fonctionner ou fonctionner de manière non sécurisée.
 P400 Caution and Warning Messages30 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL Warning Setup page 14Do not use a unit that has been tampered with or otherwise damaged. This unit comes equipped with tamper-evident label. If a label or component appears damaged, immediately notify the shipping company and your Verifone representative or service provider.Ne pas utiliser un appareil qui a été altéré ou endommagé. Cet appareil est équipé d'étiquette d'inviolabilité. Si une étiquette ou d'un composant semble être endommagé, en aviser immédiatement la compagnie maritime et votre représentant Verifone ou prestataire de services.Caution Setup page 14Observe standard precautions in handling electrostatically sensitive devices. Electrostatic discharges can damage the equipment.  Verifone recommends using a grounded anti-static wrist strap.Respecter les précautions standard dans la manipulation d'appareils sensibles aux décharges électrostatiques. Les décharges électrostatiques peuvent endommager le matériel. Verifone recommande d'utiliser un bracelet anti-statique à la terre.Caution Setup Using an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with VPN PWRXXX-xxx-xx-x.Caution  Setup Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Disconnecting power during a transaction can cause transaction data files not yet stored in memory to be lost.Warning Setup page 15Turn off or unplug the terminal when connecting or disconnecting the device to avoid device memory corruption and data loss. Refer to the controlling device instructions for any terminal-specific warnings. Éteignez ou débranchez le terminal pour connecter ou déconnecter le dispositif pour éviter la corruption de la mémoire de l'appareil et la perte de données. Reportez-vous aux instructions de l'appareil de contrôle pour tous les avertissements spécifiques au terminal.Caution Setup Leave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction.Table 4 Caution and Warning Messages  (continued)Notice Chapter Page English Text French Text
 P400 Caution and Warning MessagesP400/P400 PLUS INSTALLATION GUIDE 31VERIFONECONFIDENTIAL Warning Setup page 16 Incorrect power sequence may degrade the SoC Host port.Caution Service and Supportpage 25 Never use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic or rubber parts. Because this device can be damaged by liquid, do not spray cleaners or other solutions directly onto the keypad or display. Always apply the cleaner to a cloth before cleaning the device.N'utilisez jamais de diluant, le trichloréthylène ou des solvants cétoniques - ils peuvent détériorer les pièces en plastique ou en caoutchouc. Parce que cet appareil peut être endommagé par un liquide, ne pas vaporiser de nettoyage ou d'autres solutions directement sur le clavier ou l'écran. Toujours appliquer le nettoyant sur un chiffon avant de nettoyer l'appareil.Table 4 Caution and Warning Messages  (continued)Notice Chapter Page English Text French Text
 P400 Caution and Warning Messages32 P400/P400 PLUS INSTALLATION GUIDEVERIFONECONFIDENTIAL
P400/P400 PLUSInstallation GuideVerifone Part Number DOCXXX-00X-EN-A, Revision A.3Verifone, Inc.1-800-VerifoneTel: (800) Verifone (837-4366)www.verifone.comVERIFONECONFIDENTIAL

Navigation menu