Verifone NURIT8000SSQ Hand held Payment Terminal User Manual DOC095EN01A N8010 InstallationManual

Verifone Inc. Hand held Payment Terminal DOC095EN01A N8010 InstallationManual

User Manual

NURIT 8000Wireless Palmtop SolutionInstallation Manual
CopyrightCopyright© Lipman Electronic Engineering Ltd.All rights reserved.The content of this publication is for informational purposes only and is subject to change without notice. It does not represent a commitment on the part of Lipman Electronic Engineering Ltd.No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated to any language in any form by any means without the prior written permission of Lipman.Trademark InformationNURIT® is a registered trademark of Lipman Electronic Engineering Ltd. All other product and brand names contained in this manual are trademarks of their respective companies.Catalog NumberDOC095EN02-APrint DateNovember 2005
Installation Manual iiiForewordThank you for purchasing the NURIT 8000 Wireless Palmtop Solution. You now own one of the most advanced electronic point-of-sale (POS) terminals manufactured today.This manual provides basic installation instructions. To fully utilize the features of your NURIT 8000, and for general safety purposes, it is recommended that you familiarize yourself with this manual, the terminal and any peripheral equipment or accessories.It is recommended that you store this manual in a safe place for future reference.Document ConventionsWarning - Failure to follow specific procedures and practices may result in personal injury.Caution - Failure to follow specific procedures and practices may result in damage to the NURIT device or other equipment.Note - Helpful hints and other important information about the use of the NURIT device.NoteAll graphic images in this manual are for illustrative purposes only.Different models of this terminal may exist and may vary in appearance according to country of use or particular customer requirements.The basic installation procedure is the same for most units.The operation of the terminal is application-dependent.
Installation Manual vTable of ContentsForeword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iiiDocument Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . iii1. Product Regulatory Information. . . . . . . . . . . . . . . . . . . . 12. General Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . 4Radio Frequency Energy Emission . . . . . . . . . . . . . . . . . . . . 6Safety Precautions for Medical Devices . . . . . . . . . . . . . . . . 73. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84. Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Unpacking the Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Contents Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Selecting a Point-Of-Sale Location . . . . . . . . . . . . . . . . . . .12Wireless LAN (WiFi) Terminals . . . . . . . . . . . . . . . . . . . . . .135. Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .146. General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167. Installing the Battery Pack . . . . . . . . . . . . . . . . . . . . . . .18Battery Pack Maintenance. . . . . . . . . . . . . . . . . . . . . . . . .198. Connecting the NURIT 8000 to an AC Power Outlet . . . . . . .20Battery Pack Charge Status . . . . . . . . . . . . . . . . . . . . . . . .209. Installing the External Modem . . . . . . . . . . . . . . . . . . . . .2110. Connecting the Car Adapter . . . . . . . . . . . . . . . . . . . . . .2211. Loading Paper in the Printer . . . . . . . . . . . . . . . . . . . . . .2312. Installing the Keypad Privacy Shield . . . . . . . . . . . . . . . . .2413. Installing a SIM, SAM, or SD/MMC Card . . . . . . . . . . . . . . .25Electronic Cards Configurations . . . . . . . . . . . . . . . . . . . . .26Installing SIM and SAM Cards in the Electronic Cards Compartment: . . . . . . . . . . . . . . . . . . . . .27Installing a SIM Card in the TEL SIM Slot. . . . . . . . . . . . . . . .28Installing an SD/MMC Card . . . . . . . . . . . . . . . . . . . . . . . .30Installing the Electronic Cards Compartment Cover . . . . . . . .3114. Connecting Peripheral Devices . . . . . . . . . . . . . . . . . . . .3315. Connecting a Cellular Headset . . . . . . . . . . . . . . . . . . . .3416. Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .35Technical Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
vi Installation ManualCleaning the NURIT 8000 . . . . . . . . . . . . . . . . . . . . . . . . . 36Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Shipping the NURIT 8000 . . . . . . . . . . . . . . . . . . . . . . . . . 3717. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Appendix A: Using the Magnetic Card Reader . . . . . . . . . . 42Appendix B: Using the Smart Card Reader . . . . . . . . . . . . 43Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Installation Manual viiList of FiguresFigure 4-1 Secure Device Label . . . . . . . . . . . . . . . . . . . . . 9Figure 4-2 NURIT 8000 - Box Contents. . . . . . . . . . . . . . . . .11Figure 5-1 NURIT 8000 - Optional Accessories. . . . . . . . . . . .14Figure 6-1 NURIT 8000 - General Features . . . . . . . . . . . . . .17Figure 7-1 Battery Pack Installation . . . . . . . . . . . . . . . . . .18Figure 7-2 Battery Pack Removal . . . . . . . . . . . . . . . . . . . .18Figure 8-1 AC Power Connection . . . . . . . . . . . . . . . . . . . .20Figure 9-1 External Modem Installation . . . . . . . . . . . . . . . .21Figure 10-1 Car Adapter Connection . . . . . . . . . . . . . . . . . .22Figure 11-1 Loading Paper in the Printer. . . . . . . . . . . . . . . .23Figure 12-1 Keypad Privacy Shield Installation . . . . . . . . . . . .24Figure 13-1 Electronic Cards Configurations . . . . . . . . . . . . .26Figure 13-2 SIM/SAM Cardholder Locking-Clasp . . . . . . . . . . .27Figure 13-3 SIM/SAM Card Installation . . . . . . . . . . . . . . . . .28Figure 13-4 SIM Cardholder Ejection . . . . . . . . . . . . . . . . . .29Figure 13-5 SIM Card Installation . . . . . . . . . . . . . . . . . . . . .29Figure 13-6 SIM Cardholder Insertion . . . . . . . . . . . . . . . . . .29Figure 13-7 Positioning the SD/MMC Card . . . . . . . . . . . . . . .30Figure 13-8 Inserting the SD/MMC Card. . . . . . . . . . . . . . . . .31Figure 13-9 Installing the Electronic Cards Compartment Cover 32Figure 13-10 Void Label Installation . . . . . . . . . . . . . . . . . . .32Figure 14-1 Peripheral Device Connection. . . . . . . . . . . . . . .33Figure 15-1 Cellular Headset Connection . . . . . . . . . . . . . . .34Figure A-1 Magnetic Card Reader . . . . . . . . . . . . . . . . . . . .42Figure B-1 Smart Card Reader . . . . . . . . . . . . . . . . . . . . . .43
Installation Manual 11. Product Regulatory InformationFCC Compliance StatementManufacturer: Lipman Electronic Engineering Ltd.Model: NURIT 8000FCC Part 15 RequirementsThis equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is installed and operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. NoteThe following product regulatory information and compliance statements apply to all models of the NURIT 8000x, where x represents a suffix, such as S, SVP, or Secure, designating the specific security features of a particular model.CautionChanges or modifications to this device that are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2 Installation ManualIf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult your dealer or an experienced technician for help.Connection of peripherals to this unit requires the use of grounded, shielded cables to ensure compliance with the class B limits.FCC Part 68 Requirements[Applicable when using optional NURIT 8000 docking station or NURIT 8000 external modem] The FCC has established rules permitting this device to be directly connected to the telephone network. Standardized FCC Part 68 compliant telephone line cords and modular jacks are used for these connections. This equipment should not be used on party or coin lines.If this device is malfunctioning, it may be causing harm to the telephone network; this device should be disconnected until the source of the problem can be determined and until repair has been made. If this is not done, the telephone company may temporarily disconnect service.The telephone company may make changes in its technical operations and procedures; if such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the changes. You will be advised to file a complaint with the FCC.If the telephone company requests information on what equipment is connected to their lines, inform them of:• The telephone number to which this unit is connected • The AC Ringer Equivalence Number: 00B• The USOC jack required: RJ-11C• The FCC Registration number: O2SNURIT8000SSQ
Installation Manual 3The Ringer Equivalence Number (REN) is used to determine how many devices can be connected to your telephone line.In most areas, the sum of the RENs of all devices on any one line should not exceed five (5). If too many devices are attached, they may not ring properly. To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.FCC Part 24 RequirementsThis device may contain a radio transceiver module, (FCC ID number is located on the bottom of the terminal), operating under Part 24 of the FCC rules in a licensed part of the radio spectrum. Qualified personnel must perform service or repairs to the radio portion of this device. Any unauthorized modification to the radio module, shielding, or antenna system may void the user's authority to operate this device.This device has been tested and meets RF exposure guidelines for hand held operation pursuant to FCC OET Bulletin 65 Supplement C ed. 01-01, IEEE 1528/D1.2 (2003) and Industry Canada RSS-102 (1999).In CanadaThis digital apparatus does not exceed the class B limits for radio noise emissions from digital apparatuses set forth in the Radio Interference Regulations of the Canadian Department of Communications.Cet appareil digital n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils de la classe B, déterminée par la Réglementation d'Interférence Radio du Ministère Canadien des Communications.IC: 4804A-N8000SSQEU Directives Compliance StatementThis product complies with the requirements of applicable EU Council Directives.
4 Installation Manual2. General Safety InstructionsWhen using the NURIT 8000 or any associated device, the following basic safety precautions should always be observed to reduce the risk of fire, electric shock, or personal injury.•Read and make sure you understand all instructions.•Follow all warnings and instructions marked on the device and in this manual.•Disconnect the device from the power supply and any peripherals before cleaning.•Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning and/or a soft brush.•Do not use the device near water, especially when using the AC/DC Power Adapter or external modem.•Never spill any liquid on the device.•Place the device in a stable position on a solid surface. When operated hand-held, grasp the device securely. Serious damage may result if the device falls.•The optimal operational position for the terminal is hand-held at an angle of approximately 30°. The terminal is also designed for optimal tabletop usage. Keep the terminal a short distance from your body.•Do not cover slots and openings of the device. They may be provided for ventilation and protection against overheating. Never place the device near radiators, or in a place where proper ventilation is not provided.•Do not place objects on the power cord. Install the device where no one can step on the cord.WarningFailure to observe these instructions may result in severe personal injury or damage to the NURIT 8000 or other equipment.NoteThese safety instructions are based in general on those provided by Underwriters Laboratories (UL) Inc. U.S.A.
Installation Manual 5•Use only the power source as marked on the device. If you are not sure of the type of the power supplied to your location, consult your dealer or local power company.•Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.•Never push objects into the device through slots (other than those specifically intended for the stylus, magnetic stripe or smart cards, SAM/SIM cards, or SD/MMC card), as this may result in fire or electric shock.•To reduce the risk of electric shock, do not disassemble any of the equipment or accessories referred to in this manual. If required, take the equipment to a qualified service representative. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock.•Take care when installing an internal battery pack. If installed incorrectly, it may explode. Use only a Lipman supplied battery pack. Discard used battery packs according to local regulations.•Disconnect the device from the power supply and any peripherals and refer to qualified service personnel under the following conditions:•The power supply cable or plug is damaged or frayed.•Liquid has been spilled into the device.•The device has been exposed to rain or water.•The device does not work normally, when following the operating instructions.•The device has been dropped or damaged.•The device exhibits a distinct change in performance.•When using the NURIT 8000 optional docking station and/or external modem during thunderstorms, disconnect the telephone line, if possible. There may be a remote risk of electric shock from lightning.•Never install telephone wiring during a lightning storm.•Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.•Use caution when installing or modifying telephone lines.•Never touch non-insulated telephone wires or equipment unless the telephone line has been disconnected at the network interface.
6 Installation Manual•When in the vicinity of a gas leak, do not use the NURIT 8000, a standalone telephone or a telephone connected to a NURIT 8000 docking station to report the leak.•Do not use the NURIT 8000 in an area of potential explosive atmosphere, such as fuel or chemical storage or transfer facilities, or in any area where you would be advised to turn off a vehicle's engine.•Do not replace the battery pack or charge the NURIT 8000 in an area of potential explosive atmosphere.•Do not use the NURIT 8000 in a known blasting area.•Do not place the NURIT 8000 in the area over a vehicle-equipped air bag.•If the battery pack has been removed, ensure that no metal objects come in contact with its electrical contacts.•The NURIT 8000 is designed for use with a built-in internal antenna. Do not open the device with the intent of tampering with the antenna system. Doing so may damage the unit and violate FCC (Ministry of Communications) regulations.Radio Frequency Energy EmissionYour NURIT 8000 may contain a transmitter and receiver that emit radio frequency (RF) energy. The actual frequency range used by the NURIT 8000 is radio-modem dependent according to the specific model. Digital modulation techniques are used.During radio communication, the local radio system handling the actual communication controls the actual power transmission output level. This output level may typically vary (relative to the distance between the user location and the cell transmission sites).RF energy may affect some electronic systems. Consult the specific device manufacturer (or airline crew for possible airborne operation) regarding permission to use this device while airborne and associated problems. It is currently known that use of all radio-type devices is prohibited while airborne.•When used properly, the design of this handheld wireless terminal complies with U.S., Canadian, European and other standards for protection from public exposure to RF magnetic signals.
Installation Manual 7•This device has been tested and meets RF exposure guidelines for hand held operation pursuant to FCC OET Bulletin 65 Supplement C ed. 01-01, IEEE 1528/D1.2 (2003) and Industry Canada RSS-102 (1999).Safety Precautions for Medical DevicesFor those persons using a pacemaker or other medical device, please read the following important safety notes:•Though most electronic equipment and critical medical devices are shielded against radio-frequency signals, it is important to realize the possibilities of potential interference and to know the standard precautions that may be taken.PacemakersIndustry standards recommend a minimum separation of 15 cm (6 inches) between a wireless phone-type device and a pacemaker to prevent any potential problems.Individuals using a pacemaker should:•Always keep the NURIT 8000 terminal more than 15 cm (6 inches) from the pacemaker when using the unit for cellular wireless communication or when performing an online transaction.•Turn off the NURIT 8000 terminal immediately and disconnect it from the power supply if you suspect any problem of interference.Other Medical DevicesConsult the manufacturer of your medical device to determine its level of shielding. Depending on the proximity to certain equipment, you may be asked not to use your NURIT terminal or one of its accessories.WarningThe NURIT 8000 must be located at least 20 cm from all persons, and must not be co-located or operated in conjunction with any other antenna or transmitter.
8 Installation Manual3. SpecificationsSpecification DetailsPower•Terminal: 8.4 VDC at 1.0 A•AC/DC Adapter (Safety Approved)Input: 100-240 VAC at 50/60 Hz (0.8 A)Output: 8.4 VDC at 1.0 ADimensions•Height: 55 mm (2.17 in)•Width: 91 mm (3.58 in)•Depth: 210 mm (8.27 in)Paper Roll •57 mm x 38 mm (2.25 in x 1.5 in)•10.5 mm (0.4 in) core diameterWeight•Terminal: 600 g (21.2 oz)Including privacy shield, battery pack and paper roll•Shipping: 800g (28.2 oz)Not including this manualModem Communication Rate•56 Kbps (maximum)Approvals•EMV Levels 1 and 2•Visa PED (optional)•FCC Part 15 Class B•CENoteSpecifications are subject to change without notice following technological improvement of the device and its components.
Installation Manual 94. Initial SetupUnpacking the BoxTo u n pa c k t h e b o x :1. Place the box right side up on a stable, flat surface.2. For secure models of the NURIT 8000, verify that the Secure Device label that seals the box is intact.Figure 4-1 Secure Device Label3. For secure models of the NURIT 8000, peel off or cut through the Secure Device label.4. Open the box and carefully remove its contents.5. Carefully inspect the contents for any damaged or missing components.CautionIf the Secure Device label is damaged or missing, do not open the box. This could be an indication of device tampering and may affect the validity of the warranty for the device.Notify your Lipman distributor.NoteIt is recommended that you save the box for future repacking or moving of the terminal.
10 Installation ManualContents ChecklistThe following items should be found inside the box:NoteLipman has taken all measures to provide you with a complete device. If shipping damage is evident, file a claim with the shipping company. Notify your Lipman distributor concerning this damage, and if any components are missing.NoteAny one or more of the included accessories may be already attached to the terminal.NoteThe contents of the documentation pack may vary depending on specific customer documentation requirements.NoteDepending on the particular model of the NURIT 8000, the external modem or the car adapter may also be included in the contents of the box. See “Optional Accessories” on page 14.
Installation Manual 11Figure 4-2 NURIT 8000 - Box Contents1NURIT 8000 terminal 2Touch Screen Stylus3Keypad Privacy Shield 4Documentation Pack5Paper Roll Spindle 6Thermal Paper Roll7AC/DC Power Adapter (boxed) 8Electronic Card Compartment Cover with Void Label9Lithium-Ion Battery Pack'21275(029(
12 Installation ManualSelecting a Point-Of-Sale LocationThe NURIT 8000 is designed to be operated in the following locations:•Indoors, using the AC/DC Power Adapter, optional docking station or optional external modem.•Outdoors, powered only by the built-in battery pack.•In a vehicle, using the optional car adapter.•When not operated from its hand-held position, place the NURIT 8000 on a flat table or countertop close to the power outlet and any peripherals.•Maintain good ventilation around the terminal. Provide for at least 22 cm (8.5 in) of clear space around the terminal in its fixed operating location.•Do not cover the terminal.WarningDo not locate the terminal where it is exposed to the following:•Devices that radiate excessive electrical noise or voltage fluctuations, such as air conditioners, fans, electric motors, neon signs, or high-frequency security devices.•Water containers, such as a sink, a laundry tub or a pool.•Areas of excessive moisture, heat, oil, dust or debris.•Direct sunlight or objects that radiate heat.•Metal partitions or such obstructions that may disrupt radio transmission or reception if your terminal is used as a wireless device.CautionUnder no circumstances should the NURIT 8000 be powered or charged outdoors using its AC/DC adapter or docking station.
Installation Manual 13Wireless LAN (WiFi) TerminalsSome NURIT terminals are equipped with transceivers that can access Wireless Local Area Networks (WLAN), which are often used for short-range wireless communications in home and office environments, retail stores, restaurants, and gasoline stations. The terminals commonly connect to the WLAN via a WiFi access point or repeater. Several types of WLAN communication standards exist. NURIT WLAN terminals are equipped with transceivers that comply with the IEEE 802.11b (WiFi) standard.•Verify that all the WiFi access points and repeaters comply with this standard.•Locate the access point or repeater as close as possible to the area where the NURIT WLAN terminals are to be operated. (Follow manufacturer-supplied installation instructions and guidelines of the WiFi access points or repeaters.)•If the NURIT WLAN terminals are used over a defined area, such as within a restaurant or retail store, the WiFi access point or repeater should be located as close as possible to the center of this area.•If the area where the NURIT WLAN terminals are used exceeds the maximum range for WiFi reception, install additional access points or repeaters as required.•Do not locate the WiFi access point or repeater where metal objects or electrical appliances may obstruct communication with the terminals.NoteBefore using the NURIT 8000, remove the thin transparent plastic membrane that covers the LCD screen.NoteDo not use a NURIT 8000 that shows any signs of damage.
14 Installation Manual5. Optional AccessoriesFigure 5-1 NURIT 8000 - Optional AccessoriesCautionConnection of any accessory that is not explicitly approved by Lipman may cause damage and thus void the Limited Warranty of this equipment.1Docking Station 5PC-Terminal Cable2Barcode Adapter 6Car Adapter3External Modem 7Cellular Headset4Keyboard Emulation Cable 8Terminal-Terminal CableNoteAvailability of the optional accessories may vary according to customer requirements.Consult your authorized Lipman representative for information regarding availability of current or future optional accessories.
Installation Manual 15Accessory DetailsDocking Station•Charger for the terminal battery pack and for the optional spare battery•Connects to peripheral devices•Optional integrated telephone line modem, equivalent to the External Modem accessoryStandard RS-232 Barcode Reader Adapter•Connects to an RS-232 barcode readerExternal Modem•Up to 14.4 kbps, 33.6 kbps or 56 kbps telephone line modem•Implements synchronous or asynchronous, HDLC, TCP/IP protocols•Supports FastConnect connectivity•May be supplied with the terminal as a standard accessory (model-dependent).Keyboard Emulation Barcode Reader Adapter•Enables connection of a PC keyboard or barcode reader to the terminal•Facilitates the entry of catalog items and other dataPC-Terminal Cable•Cable used for downloading software applications to the terminal•Connects to an RS-232 COM port on the PCCar Adapter•Connects to standard 12V vehicle electrical power socket•Used to power the NURIT 8000 and to charge its battery pack•May be supplied with the terminal as a standard accessory (model-dependent).Cellular Headset Cable•Hands-free headset•2.5 mm plug•Not supplied by Lipman. Contact your cellular dealer for purchasing detailsTerm in al- Term ina l Interconnection Cable•Enables peer-to-peer software updatingNote: For security reasons, terminal-terminal software updating is not available for terminals with Secure Download enabled.
16 Installation Manual6. General FeaturesThe NURIT 8000 includes the following features:Feature DescriptionLCD Display•Graphical LCD display of general operational prompts and messages•Black and white•128x128 pixelsTouch Screen • Application-dependent touch screenStylus •Touch screen stylus•Integrated stylus storage slotKeypad•10-key telephone-style keypad section (including the letters of the alphabet and the numerals 0-9)•8 function and special keys such as 'Cancel', 'Enter' and 'Backspace'.Keypad Privacy Shield •Detachable privacy shieldSmart Card Reader • Integrated, front-entry smart card readerMagnetic Card Reader•Integrated, bi-directional reader for magnetic stripe cardsElectronic Cards Compartment•Up to two SAM cards•One SAM and one SIM card•One SAM card and one SD/MMC cardNote: Configuration is model-dependentSIM Slot •Slot for the insertion of a SIM card, depending on the model.Thermal Printer • Integrated printer uses thermal paper.Connectors•3-pin Power Jack•Data Port•Headset Jack•Docking Station ConnectorBattery Pack•Smart Lithium-ion battery pack•Supplies 7.2 VDC at 1450 mAH (minimum)•Fully recharges within three hours (80% charge capacity within one hour)
Installation Manual 17Figure 6-1 NURIT 8000 - General Features1Keypad 11 Data Port2Keypad Privacy Shield 12 Power Jack3LCD Display 13 Docking Station Connection Cover4Magnetic Card Reader 14 Battery Pack Release Button5Paper Tear Bar 15 Battery Pack6Paper Compartment Cover 16 Compliance Label7Paper Compartment Cover Release Button 17 Model/Barcode Serial Number Label8Stylus 18 Radio Modem Label9Smart Card Reader 19 Rubber Stop10 Headset Jack
18 Installation Manual7. Installing the Battery PackTo install the battery pack:1. Carefully hold the terminal facedown or place it on a soft, smooth surface so as not to damage the LCD touch screen.2. Hold the battery pack, verifying that the side with an arrow pictogram is facing upward.3. Slide the two tabs on the front of the battery pack into the slots on the front wall of the battery pack compartment.4. Press down on the battery pack until it snaps into place.Figure 7-1 Battery Pack InstallationTo remove the battery pack:1. Carefully hold the terminal facedown or place it on a soft, smooth surface so as not to damage the LCD touch screen.2. Press and lift the locking tab on the battery pack to release it from the compartment.3. Remove the battery pack from the terminal.Figure 7-2 Battery Pack RemovalCautionCharge the battery pack for a period of 12 hours before first use.
Installation Manual 19Battery Pack Maintenance•The supplied high-performance, smart Lithium-Ion battery pack provides 7.2 VDC at 1450 mAH (minimum) capacity.•When fully discharged, the battery fully recharges within three hours while installed in the terminal. An 80% charge capacity is reached within one hour.•The terminal can be connected to an AC/DC power supply indefinitely without causing damage to the battery.•In typical use, the life span of the battery pack exceeds 500 charge cycles, after which, operating time decreases slowly.•The battery pack has a self-discharge rate. It loses approximately 1% of its charge per day when not in use.•Replace the battery pack when the charge capacity is too weak for normal operation.•Remove the battery pack from the terminal if you do not intend to use your NURIT 8000 for an extended period of time.CautionWhen using the Lipman-supplied AC/DC Power Adapter, the Lithium-Ion battery pack must be installed in the terminal.WarningDo not dispose of the battery pack in a fire. Dispose of used batteries in accordance with local recycling regulations. If you intend to remove the battery pack, verify that the metal contacts do not come in contact with any metal objects.NoteExtreme temperatures degrade the battery performance. Do not store the battery pack in temperatures below -20°C (4°F) or above 60°C (140°F).
20 Installation Manual8. Connecting the NURIT 8000 to an AC Power OutletYou can connect the NURIT 8000 to an AC power outlet using the Lipman-supplied AC/DC Power Adapter.To connect the NURIT 8000 to an AC power outlet:1. Connect the plug of the AC/DC Power Adapter cable to the 3-pin power jack on the front panel of the NURIT 8000.2. Connect the AC/DC Power Adapter cable to an AC power outlet.Figure 8-1 AC Power ConnectionBattery Pack Charge StatusThe LED indicator on the AC/DC Power Adapter and the Car Adapter lights according to the charge status:Red - The battery pack is charging (less than 80% charged).Green - The battery pack is charging (80% or more charged).No Light - The battery pack is fully charged or the charger is disconnected from the AC power outlet.
Installation Manual 219. Installing the External ModemYou can use the optional external fast modem to download applications and parameters to the NURIT 8000 via a standard telephone line.To install the external modem:1. Insert the modem's data plug into the data port on the front panel of the NURIT 8000.2. Connect a standard telephone line cord from the modem to a standard RJ-11 type modular telephone line outlet.Figure 9-1 External Modem Installation
22 Installation Manual10. Connecting the Car AdapterYou can use the Car Adapter to provide power to the NURIT 8000 and to charge the installed Lithium-ion battery pack.To install the Car Adapter:1. Connect the plug of the Car Adapter cable to the 3-pin power jack on the front panel of the NURIT 8000.2. Plug the car adapter into the vehicle's electrical power socket.Figure 10-1 Car Adapter ConnectionTo remove the Car Adapter:1. Unplug the Car Adapter from the vehicle's electrical power socket. 2. Unplug the Car Adapter battery charger cable from the 3-pin power jack on the front panel of the NURIT 8000.NoteThe LED indicator on the Car Adapter lights to indicate the charge status of the battery pack, as described in “Battery Pack Charge Status” on page 20.
Installation Manual 2311. Loading Paper in the PrinterThe NURIT 8000 is equipped with an easy-load thermal printer.To load a roll of thermal paper in the printer:1. Place the terminal on a flat, stable surface.2. Press the paper roll compartment cover release button in the direction indicated by the displayed arrow.3. Fully open the paper roll compartment cover.4. Remove the paper roll spindle from the paper roll 5. Remove the tape strip from a new thermal paper roll.6. Insert the paper roll spindle into the new paper roll.7. Unroll approximately 5 cm (2 inches) of paper to facilitate the loading process.8. While holding the roll, place the spindle into the slots on each side of the paper roll compartment.9. Ensure that the paper roll feeds from the bottom.Approximately 2.5 cm (1 inch) of paper should extend out of the paper roll compartment between the cover and the paper tear bar.10. Close the paper roll compartment cover and press down firmly until it snaps into place.Figure 11-1 Loading Paper in the Printer
24 Installation Manual12. Installing the Keypad Privacy ShieldTo install the keypad privacy shield:1. Place the terminal on a flat, stable surface, or hold it securely in one hand.2. Position the tabs on the inner front sides of the keypad privacy shield over the indentations on each side of the terminal.3. Press down the keypad privacy shield until it snaps into place.Figure 12-1 Keypad Privacy Shield InstallationTo remove the keypad privacy shield:1. Place the terminal on a flat, stable surface, or hold it securely in one hand.2. Grasp the keypad privacy shield and pull it away from the terminal.NoteFailing to install or removing the keypad privacy shield may render the terminal non-compliant with ISO 9564 for PIN protection and may violate card association requirements for PIN Entry Devices.
Installation Manual 2513. Installing a SIM, SAM, or SD/MMC CardDepending on the particular model, you can install a variety of electronic memory or processing cards in the NURIT 8000. These cards include the following:•Up to two (2) SAM (Secure Access Module) cards can be installed in SAM cardholders 1 and 2, located in the NURIT 8000's Electronic Cards Compartment. SAM cards may be used to hold encryption keys, identify the terminal or merchant to the host, process applications, or a variety of other uses.•A SIM (Subscriber Identity Module) card identifies the mobile terminal in a GSM or GPRS network. Depending on the particular model, the SIM card may be installed in the SAM2/SIM cardholder, when the terminal has one SAM cardholder and no SD/MMC card, or in the TEL SIM slot in the battery compartment, in terminals with two SAM cardholders or an SD/MMC cardholder.•SD (Secure Digital) or MMC (Multi-Media Card) cards hold data, such as price lists and offline transaction information.The diagrams below illustrate the possible configurations of SIM, SAM and SD/MMC cards in the NURIT 8000. NoteA SIM card must be installed when using a model of the NURIT 8000 that implements GSM or GPRS wireless communications technology.CautionThe contacts on the electronic cards and cardholders can be easily damaged. Do not bend or scratch when installing or removing an electronic card.
26 Installation ManualElectronic Cards ConfigurationsFigure 13-1 Electronic Cards Configurations Configuration DescriptionA•One SAM card is installed in the SAM1 cardholder.•A SIM card is optionally installed in the SAM2/SIM cardholder.•The TEL SIM Slot is sealed and inaccessible.B•Two SAM cards are installed in the SAM1 and SAM2/SIM cardholders.•A SIM card is optionally installed in the TEL SIM slot.C•One SAM card is installed in the SAM1 cardholder.•An SD/MMC card is installed in the SD/MMC card slot.•A SIM card is optionally installed in the TEL SIM slot.6,0 6$07(/6,06$0 6$07(/6,06'00& 6$07(/6,0345
Installation Manual 27Installing SIM and SAM Cards in the Electronic Cards Compartment:To Install SIM and SAM cards:1. Remove the battery pack from the terminal, as described in “Installing the Battery Pack” on page 18.2. Remove the electronic cards compartment cover, if it is in place.3. Slide the cardholder locking-clasp in the direction indicated by the engraved arrow to the OPEN position.Figure 13-2 SIM/SAM Cardholder Locking-Clasp4. Lift the cardholder on its hinge to an upright position.5. Hold the SAM or SIM card so that its chip side is facing down towards the contacts on the reader.6. Insert the end closest to the chip on the SAM or SIM card into the cardholder.NoteIn models that have an accessible TEL SIM slot, it should always be used to install the SIM card, as described on page 28.
28 Installation ManualFigure 13-3 SIM/SAM Card Installation7. Close the SAM or SIM cardholder.8. Lock the cardholder by sliding the cardholder locking clasp in the direction indicated by the engraved arrow to the LOCK position.9. If required, replace or install the electronic cards compartment cover. See “Installing the Electronic Cards Compartment Cover” on page 31.10. Replace the battery pack, as described in “Installing the Battery Pack” on page 18.Installing a SIM Card in the TEL SIM SlotThe NURIT 8000 includes a slot to install a SIM card, which is required if the terminal implements GSM or GPRS wireless communication technology. See “Electronic Cards Configurations” on page 26 for a description of when this slot is used.To install a SIM card in the TEL SIM slot:1. Remove the battery pack from the terminal, as described in “Installing the Battery Pack” on page 18.2. Using the pointed end of the touch screen stylus (or any instrument with a similarly-sized pointed end), push the SIM cardholder eject button at the front left side of the TEL SIM slot until the SIM cardholder is ejected.1SAM or SIM Card 2Bevelled Corner3Metal Contact 4SAM1 Cardholder5SAM2 or SIM Cardholder51324
Installation Manual 29Figure 13-4 SIM Cardholder Ejection3. Extract the SIM cardholder fully from the TEL SIM slot and turn it over, revealing the SIM card inside the cardholder.4. Insert the SIM card into the cardholder with the metal contacts facing up.Figure 13-5 SIM Card Installation5. Turn the SIM cardholder over, so that the metal contacts face down, and insert it fully into the TEL SIM slot.Figure 13-6 SIM Cardholder Insertion6. Replace the battery pack, as described in “Installing the Battery Pack” on page 18.
30 Installation ManualInstalling an SD/MMC CardSome models of the NURIT 8000 may be equipped with a single SD/MMC (Secure Digital/Multi-Media Card) card slot in the electronic cards compartment.To install an SD/MMC card:1. Remove the battery pack from the terminal, as described in “Installing the Battery Pack” on page 18.2. Remove the electronic cards compartment cover, if it is in place.3. Hold the SD/MMC card directly above the SD/MMC card slot, with the metal contacts facing down and the narrow edge with the beveled corner pointing towards the slot opening.Figure 13-7 Positioning the SD/MMC Card4. Lower the SD/MMC card into position.5. Press down on the SD/MMC card while sliding it into the slot.1SD/MMC Card 2Bevelled Corner3SD/MMC Card Slot Opening 4SAM Cardholder5SD/MMC Cardholder15234
Installation Manual 31Figure 13-8 Inserting the SD/MMC Card6. If required, replace or install the electronic cards compartment cover. See “Installing the Electronic Cards Compartment Cover” on page 31.7. Replace the battery pack, as described in “Installing the Battery Pack” on page 18.Installing the Electronic Cards Compartment CoverAfter installing the SIM, SAM, and/or SD/MMC card(s), you can cover the electronic cards compartment with the supplied plastic cover. You can also protect this cover from being opened by sticking the included void label over the cutout in the cover.To install the electronic cards compartment cover:1. Remove the battery pack from the terminal, as described in “Installing the Battery Pack” on page 18.2. Insert the two square tabs at the top of the plastic cover beneath the upper wall of the electronic cards compartment.3. Press down on the bottom of the cover until the two tabs snap into place under the lower wall of the electronic cards compartment.
32 Installation ManualFigure 13-9 Installing the Electronic Cards Compartment Cover4. Peel the back off the DO NOT REMOVE void label and stick the label over the cutout in the plastic cover.Figure 13-10 Void Label Installation5. Replace the battery pack, as described in “Installing the Battery Pack” on page 18.
Installation Manual 3314. Connecting Peripheral DevicesYou can connect a variety of optional peripheral devices to the NURIT 8000.To connect a peripheral device to the NURIT 8000:1. Connect the peripheral device to the appropriate end of the adapter cable (see “Optional Accessories” on page 14).2. Insert the other end of the adapter cable into the data port on the front panel of the NURIT 8000.Figure 14-1 Peripheral Device ConnectionNotePeripheral devices may require special adapter cables to connect to the NURIT 8000. Certain peripheral devices may also require an external power supply.Refer to the specific product documentation of the peripheral devices or contact your local Lipman representative for further details.1Contactless Card Reader 2Signature Capture Device3PC 4Barcode Reader5Electronic Scale 6Check Reader
34 Installation Manual15. Connecting a Cellular HeadsetYou can use a standard cellular headset with NURIT 8000 models that support cellular telephone communication.To use the cellular headset:1. Insert the plug on the headset cable into the headset jack on the front panel of the NURIT 8000.2. Place the earpiece on the headset cable in your ear.Figure 15-1 Cellular Headset ConnectionNoteWhen disconnecting the cellular headset, grasp the plug on the headset cable. Do not pull the cable to disconnect the cellular headset.
Installation Manual 3516. Care and MaintenanceMaintenance RecommendationsThe NURIT 8000 has been designed to give you long and trouble-free service with minimal operator care.To maintain proper functioning of the terminal:•Keep the terminal in the cleanest possible working and storage environment.•Protect the terminal from direct sunlight, extreme heat, damp and dust.•Do not open the AC/DC Power Adapter.•Do not shake or drop the terminal.•Do not attempt to open terminal components, other than the battery pack compartment.Technical AssistanceContact your Lipman representative for technical assistance and ordering information regarding specific components or accessories. CautionOpening a secure model of the NURIT 8000 will automatically result in erasure of all secret encryption keys and will render the terminal inoperable.
36 Installation ManualCleaning the NURIT 8000To c l e a n t h e N U R I T 8000:•Gently wipe off dirt from the terminal with a soft, damp, lint-free cloth.•A very mild dishwashing detergent can be used to dampen the cloth.•Alcohol or alcohol-based cleansers may also be used for stains that are more difficult.•If available, a low-pressure blower can be used to remove dirt or debris accumulated around the keypad buttons and within the paper roll compartment.•If possible, use a lens blower to remove dust and dirt from the LCD touch screen.•When necessary, gently wipe the touch screen with a soft cloth or eyeglass lens wiper.Cleaning the PrinterTo clean the printer:1. Disconnect the terminal from the power supply.2. Open the paper roll compartment cover.3. Carefully lift the paper roll and remove any excess pieces of paper or dirt that might be lodged in the compartment. If available, use a low-pressure compressed air gun.4. Replace the paper roll.5. Close the paper roll compartment cover.Caution•Never use abrasive compounds or solvents, thinners, benzene or synthetic cleansers as they may distort or damage the plastic and critical parts.•Never clean the keypad with liquids. Use only a lightly dampened cloth or soft brush.•Never rub or strongly press on the LCD touch screen.
Installation Manual 37Shipping the NURIT 8000In exceptional circumstances, you may be required to ship your NURIT 8000 to a servicing facility.To s h i p t h e N U R I T 8000:1. Carefully pack the NURIT 8000, preferably in the original box.2. Attach a postage-paid letter to the outside of the package detailing the complaint and including the following information:•Serial Number(displayed on the bottom of the terminal)•Date of Purchase•Name of Dealer•Address of Dealer3. Send the package prepaid and adequately insured.NoteNotify a Lipman representative before shipping the NURIT 8000. Shipment must be to an authorized dealer or service center only. Products sent to other locations will be returned at the owner's expense.Contact your Lipman dealer for the correct address.
38 Installation Manual17. TroubleshootingThe NURIT 8000 has been designed for trouble-free operation. However, minor problems may occur during installation and use.This section briefly describes how to troubleshoot some possible common problems that may arise during the normal operation of the NURIT 8000.Before requesting service for the terminal, read this section to find a possible remedy for the problem. If you are still unable to solve the problem, contact a service representative.Do not try to solve the problem by opening the terminal yourself.CautionTurn off the NURIT 8000 or disconnect it from the power supply before connecting or disconnecting any peripheral device.The terminal appears to have no power1. Verify that the AC/DC Power Adapter is fully plugged into the AC power outlet and that its barrel connector mates properly with the terminal power jack.2. Verify that voltage is reaching the AC power outlet by connecting a different device to this outlet. If you suspect any type of problem at this electrical outlet, contact a certified electrician for a professional inspection.3. Press and hold down the 'ON' key for three (3) seconds.4. Verify that the battery pack is securely installed and sufficiently charged.5. If possible, try to operate the NURIT 8000 with a different Lipman supplied AC/DC Power Adapter.6. Connect the NURIT 8000 to a different AC power outlet.7. Try to adjust the LCD screen contrast settings, using the designated, model-dependent key combination.8. If the problem persists, contact an authorized service representative.
Installation Manual 39 Trans acti ons c anno t be completed successfully1. Try to perform the transaction using a different magnetic or smart card (model-dependent).2. Make sure you have inserted or swiped the card in the proper manner.3. Attempt to complete several transactions manually using the terminal keypad instead of using customer cards.If all these transactions are completed successfully, contact an authorized service representative.4. If a manually performed transaction is not completed successfully, verify that the wireless transmission quality is sufficient to complete the transaction. Try changing your location to obtain improved transmission quality.5. If the problem persists, contact an authorized service representative.Wireless communication is disrupted or cannot be established1. Try moving the terminal to a more open operating area. An enclosed area degrades the quality of wireless reception and transmission.2. Verify that the SIM card being used for wireless communication is installed correctly and is not damaged or malfunctioning.3. In general, the angle of operation does not affect terminal performance. However, for optimal usage, hold the terminal at an angle not exceeding 30°.4. If the problem persists, contact an authorized service representative.
40 Installation Manual Operation with a peripheral device is not successful1. Verify that the peripheral device is properly connected to the terminal.2. Try to verify whether the peripheral device is functioning properly.3. Replace the cable or the adapter cable being used with the peripheral device.4. If the problem persists, contact an authorized service representative.The printer does not function properly1. Recharge or replace the battery pack.2. If the problem persists, connect the terminal to the AC power outlet using the AC/DC Power Adapter.3. Verify that the AC/DC Power Adapter is connected properly to the AC power outlet and that its barrel plug mates with the power jack on the front panel of the terminal. Verify that the LCD display is lit.4. Verify that the paper roll compartment cover is fully and securely closed.5. Open the paper roll compartment cover and check whether the paper roll has been used up. If it has, replace the thermal paper roll.6. Verify the paper roll and spindle are correctly installed.7. Verify that the paper has been fed to the printer from the bottom of the paper roll.8. Verify that the paper is not jammed or damaged. If it is, reload the paper.9. If the problem persists, contact an authorized service representative.
Installation Manual 41The printer continues to operate when out of paper1. Verify that the paper sensor of the printer mechanism (inside the paper roll compartment) is not blocked by paper or debris.2. If the problem persists, contact an authorized service representative.The magnetic card reader does not function properly1. Verify that the card has been swiped with its magnetic stripe at the bottom and facing the user. See Figure A-1 “Magnetic Card Reader” on page 42.2. Swipe the magnetic card in the opposite direction.3. If possible, try using a different magnetic card.4. If the problem persists, contact an authorized service representative.The smart card reader does not function properly1. Verify that the chip end of the smart card is fully inserted with chip side up. See Figure B-1 “Smart Card Reader” on page 43.2. If possible, try using a different smart card.3. If the problem persists, contact an authorized service representative.
42 Installation ManualAppendix A: Using the Magnetic Card ReaderA magnetic card reader is located between the terminal’s LCD touch screen and the release button of the paper roll compartment cover.To use the magnetic card reader:1. Grasp the card so that its magnetic stripe is facing you.2. Place the card into one end of the card reader slot.3. Swipe the card in a smooth continuous manner in either direction (left-to-right or right-to-left).Figure A-1 Magnetic Card Reader
Installation Manual 43Appendix B: Using the Smart Card ReaderTo use the smart card reader:1. Hold the smart card with the metal chip facing upward and directed toward the opening of the smart card reader at the front of the NURIT 8000.2. Insert the card into the smart card reader slot.Figure B-1 Smart Card Reader3. Remove the card when prompted by the terminal, depending on the specific application being used.NoteFor guidance, a pictogram near the card slot indicates how to insert the smart card into the smart card reader. In addition, insertion direction arrows may be engraved or inscribed on the smart card.
44 Installation ManualContact InformationLipman Electronic Engineering Ltd.Lipman Corporate HeadquartersTel: +972 3 902 9730Fax: +972 3 902 9731mail@lipman.co.ilwww.lipman.bizLipman USATel: +1 516 4849898Fax: +1 516 4849057info@lipmanusa.comwww.lipmanusa.comLipman Canada Inc.Tel: +1 905 3612867Fax: +1 905 3616401rclark@lipmancanada.comwww.lipmancanada.comLipman Latin AmericaTel: +1 305 2344110Fax: +1 305 9712638obello@lipmanusa.comwww.lipmanusa.comLipman TurkeyTel: +90 212 2763388Fax: +90 212 2763898mail@lipman.com.trwww.lipman.com.trLipman AustraliaTel: +972 3 902 9730Fax: +972 3 902 9731mail@lipman.co.ilwww.lipman.bizLipman Far EastTel: +972 3 902 9750Fax: +972 3 902 7591info@lipman.co.ilwww.lipmanfareast.comLipman IndiaTel: +972 3 902 9750Fax: +972 3 902 7591info@lipman.co.ilwww.lipmanindia.comDione UKTel: +44 1494 486 000Fax: +44 1494 486 050info@dione.co.ukwww.dione.co.uk

Navigation menu