VTech Telecommunications 80-8600-00 1.9GHz DECT Cordless Phone - Base Unit User Manual CS6649 X CIB V1 20111104 For Approval

VTech Telecommunications Ltd 1.9GHz DECT Cordless Phone - Base Unit CS6649 X CIB V1 20111104 For Approval

UserManual.wiki >

VTech Telecommunications >

80 8600 00 User Manual

User Manual

User’s manualwww.vtechphones.comModels:CS6649/CS6649-2/CS6649-3/CS6648-2

iTable of contentsGetting started................................. 1Parts checklist ................................... 1Telephone installation........................ 2Handset battery installation ............... 3Handset battery charging .................. 4Installation options............................. 5Tabletop to wall mount installation .... 5Wall mount to tabletop installation..... 7Telephone base layout ...................... 8Handset layout................................. 10Telephone settings........................ 12Using the menu ............................... 12Ringer volume ................................. 13Ringer tone...................................... 13LCD language.................................. 14Clear voicemail indicators................ 14Key tone .......................................... 15Set date and time ............................ 16CID time synchronization................. 17Home area code.............................. 17Dial mode ........................................ 18Website............................................ 18Telephone operation ..................... 19Make a call ...................................... 19Predial a call.................................... 19Answer a call ................................... 20End a call......................................... 20Speakerphone ................................. 20Volume control................................. 21Mute................................................. 21Redial .............................................. 22Call waiting ...................................... 23Temporary ringer silencing.............. 23Temporary tone dialing.................... 24Find handset.................................... 24Chain dialing.................................... 25Multiple handset use..................... 26Join a call in progress...................... 26Intercom........................................... 26Answer an incoming call during an intercom call................................. 29Call transfer using intercom............. 29Directory......................................... 32About the directory .......................... 32Add a directory entry ....................... 33Review directory entries .................. 35Alphabetical search ......................... 35Dial a directory entry........................ 36Edit a directory entry........................ 37Delete a directory entry ................... 37Call log............................................ 38About the call log............................. 38Information about caller ID with call waiting.......................................... 38Call log............................................. 39Memory match................................. 39Missed call indicator ........................ 40Review the call log........................... 40View dialing options......................... 41Dial a call log entry .......................... 42Save a call log entry to the directory ....................................... 42Delete call log entries ...................... 43Call log display screen messages ... 43Answering system settings.......... 44Answering system ........................... 44Announcement ................................ 44Record your own announcement..... 44

iiPlay your announcement................. 45Delete your announcement ............. 45Answer on/off................................... 46Call screening.................................. 47Number of rings............................... 47Remote access code....................... 48Message alert tone.......................... 48Voice language................................ 49Answering system operation ....... 50Answering system and voicemail .... 50Using the answering system and voicemail together........................ 50Message capacity............................ 51New message indication.................. 51Call screening.................................. 51Call intercept.................................... 51Temporarily turn off the message alert tone ...................................... 52Message playback........................... 53Delete all old messages .................. 54Record, play and delete memos...... 55Message window displays............... 56Remote access................................ 57Appendix ........................................ 58Display screen messages................ 58Handset and telephone base indicators...................................... 61Battery ............................................. 63Expand your telephone system ....... 64Add and register a handset ............. 64Deregister handsets ........................ 65Troubleshooting............................... 66Important safety instructions............ 73Precautions for users of implanted cardiac pacemakers..................... 74Operating range............................... 74Maintenance.................................... 74About cordless telephones .............. 75The RBRC® seal .............................. 75FCC, ACTA and IC regulations ....... 76Limited warranty .............................. 786GEJPKECNURGEKſECVKQPU................... 80Index ............................................... 81

1Parts checklistYour telephone package contains the following items. Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service.Getting startedTo purchase replacement batteries or power adapters, visit our website at www.vtechphones.com or call 1 (800) 267-7377. In Canada, please visit www.vtechcanada.com or call 1(800)267-7377.Quick start guideUser’s manualCorded handsetTelephone baseHandset Battery compartment cover BatteryHandset charger and charger adapterTelephone base adapterTelephone line cordUser’s manual

Getting started2Telephone installationInstall the telephone base and handset charger(s) as shown below.Make sure that the electrical outlet is not controlled by a wall switch.If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller IDproblems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.This telephone provides minimal functionality during a power outage. When the AC power is not available, many telephone features do not function. The telephone uses power from the telephone line to enable you to make and answer calls using only the corded handset and dialing keys. However, when more than one telephone on the same line is being used simultaneously, there might not be sufficient power to operate your telephone in the event of a power failure.Telephoneline cordIf you have DSL high-speed Internet service, a DSL filter (not included) is required.Telephone base power adapterTelephone base ChargerElectrical outlet not controlled by a wall switchChargeradapterTelephonewall jack

Getting started3Handset battery installationInstall the battery as shown below.Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label.Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment.Align the cover flat against the battery compartment, then slide it towards the center of the handset until it clicks into place.Charge the handset by placing it in the handset charger. The CHARGE light is on when the handset is charging.1.2.3.4.If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage.To purchase replacement batteries, visit our website at www.vtechphones.comor call 1 (800) 267-7377. In Canada, please visit www.vtechcanada.com or call 1(800)267-7377.••1 234CHARGE lightremains on when charging.

Getting started4Handset battery chargingOnce you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the handset charger to charge the battery. For best performance, keep the handset in the handset charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table on page 63 for battery operating times.If the screen is blank or displays Place in charger, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset displays Low battery along with a flashing icon. If you are on a call in low battery mode, the handset plays short beeps to alert you.The following table summarizes the battery charge indicators and actions to take.Battery indicators Battery status ActionThe screen is blank, or displays Place in chargerand flashes.Battery has no or very little charge. The handset cannot be used.Charge without interruption (about 30 minutes).The screen displaysLow battery and flashes.Battery has enough charge to be used for a short time.Charge without interruption (about 30 minutes).The screen displays HANDSET X.Battery is charged. To keep the battery charged, place it in the handset charger when not in use.If you place the handset in the handset charger without installing a battery, the screen displays No battery.

Getting started5Installation optionsYour telephone base is ready for tabletop use. If you want to mount your telephone on a wall, swivel the wall mount bracket down to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the mounting plate.Tabletop to wall mount installationPlug one end of the telephone line cord into the telephone line jack (TEL. LINE)on the bottom of the telephone base. Plug the small end of the power adapter into the jack on the bottom of the telephone base.1.Press down the tabs as the arrows indicated below. The wall mount bracket will detach from the telephone base. Swivel it down into wall mount position. Press it down onto the telephone base until it clicks into place.2.Tabletop position Wall mount position

Getting started6Press down the switch hook and slide the handset tab upward to remove it from the slot. Rotate the handset tab by 180 degrees. Press down the switch hook and then replace the handset tab to its slot. The protruding edge of the handset tab holds the corded handset in place when the phone is mounted on the wall.3.Plug the power adapter and telephone line into the wall outlets. 4.SwitchhookHandsettabAlign the holes on the wall mount bracket with the standard wall mounting plate and slide the telephone down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties.5.

Getting started7Wall mount to tabletop installationRemove the telephone base from the wall. If necessary, untie the bundled telephone line cord and power adapter cord. Pull the wall mount bracket to detach it from the telephone base. Swivel it upward and then press onto the telephone base until it clicks into place.1.2.3.Press down on the switch hook and slide the handset tab upwards to remove it from the slot. Rotate the handset tab by 180 degrees. Press down the switch hook and then replace the handset tab to its slot.4.Tabletop positionWall mount positionSwitchhookHandsettab

Getting started8Telephone base layoutIN USE lightOn when the phone is in use, or when the answering system is answering an incoming call.On when a handset is being registered (page 64).Flashes when there is an incoming call.Flashes when handsets are being deregistered (page 65).Flashes when another telephone is in use on the same line.FLASHDuring a call, press to answer an incoming call when you receive a call waiting alert (page 23).MENU/SELECTPress to show the menu (page 12).While in the menu, press to select an item, orsave an entry or setting.CANCELWhile in a menu, press to cancel an operation, back up to the previous menu or exit the menu display (page 12).Press and hold to erase the missed call indicator when the base is not in use (page 40).While entering names or numbers, press to delete a character or digit.While the phone is ringing, press to silence the base ringer temporarily (page 23).CID (call log)Press to view the call log when the base is not in use. (page 40).Press to scroll down while in menus and lists.While entering or modifying names or numbers, press to move the cursor to the left.FIND HANDSETPress to page all handsets when the phone is not in use (page 24).Press to review the directory when the base is not in use. (page 35).Press to scroll up while in menus and lists.While entering or modifying names or numbers, press to move the cursor to the right.INTPress to initiate or answer an intercom call (page 28), or to transfer a call (page 31).1While reviewing a call log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 41).

Getting started9TONEPress to switch to tone dialing during a call if you have pulse service(page 24).Telephone base layoutMICMicrophone.MUTEDuring a call, press to mute the microphone (page 21).While the phone is ringing, press to silence the base ringer temporarily (page 23).VOL (volume)During a call or message playback, press to adjust the listening volume (pages 21and 53).Press to adjust the telephone base ringer volume when the base is not in use (page 13).REDIAL/PAUSEPress repeatedly to view the last 20 numbers dialed (page 22).While entering numbers, press and hold to insert a dialing pause./SPEAKERPress to make, answer or end a call (page 19).Press to switch between the base speakerphone and the corded handset (page 20)./ANS ON/OFFPress to turn the built-in answering system on or off (page 46)./PLAY/STOPPress to start or stop message playback (page 53).Flashes when there are new messages or memos in the answering system. X/DELETEPress to delete the playing message (page 53).When the base is not in use, press twice to delete all old messages (page 54).While reviewing the redial list, directory or call log, press to delete an individual entry(page 22, page 37 and page 43 respectively).While predialing, press to delete digits (page 19)./REPEATPress once to repeat the playing message or press twice to play the previous message (page 53)./SKIPPress to skip to the next message during the message playback (page 53).Dialing keysPress to enter numbers or characters.Press to answer an incoming call.

10Getting startedHandset layoutCHARGE lightOn when the handset is charging in the handset charger (page 3)./ /VOLUME (directory)Press to display the directory (page 35).Press to scroll up while in menus or lists. While entering names or numbers, press to move the cursor to the right. During a call or message playback, press to increase the listening volume (pages 21 and 54).MUTE/DELETEDuring a call, press to mute the microphone (page 21).While the phone is ringing, press to silence the ringer temporarily (page 23).While reviewing the redial list, directory or call log, press to delete an individual entry (page 22, page 37and page 43 respectively).While predialing, press to delete digits (page 19)./FLASHPress to make or answer a call (pages 19 and 20).During a call, press to answer an incoming call when you receive a call waiting alert (page 23).1While reviewing a call log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 41).TONEPress to switch to tone dialing during a call if you have pulse service (page 24). (Speakerphone)Press to make or answer a call (pages 19 and 20).Press to switch between the handset speakerphone and the cordless handset (page 20).

11Getting startedHandset layoutCID/ /VOLUME (caller ID)Press to display the call log (page 40).Press to scroll down while in menus or lists.While entering names or numbers, press to move the cursor to the left.During a call or message playback, press to decrease the listening volume (pages 21 and 54).MENU/SELECTPress to show the menu (page 12).While in the menu, press to select an item or save an entry or setting.OFF/CANCELDuring a call, press to hang up (page 20).While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display.While the phone is ringing, press to silence the ringer temporarily (page 23).Press and hold to erase the missed call indicator when the handset is not in use (page 40).Dialing keysPress to enter numbers or characters.Press to answer an incoming call.# (pound key)Press repeatedly to display other dialing options when reviewing a call log entry (page 41).INTPress to initiate or answer an intercom call (page 27), or to transfer a call (pages 29 and 30).REDIAL/PAUSEPress repeatedly to view the last 20 numbers dialed(page 22).While entering numbers, press and hold to insert a dialing pause.

1212Using the menuYou can use the telephone base or a cordless handset to change your telephone settings.In the ringers menu, you can select the ringer tones and adjust the ringer volume for incoming calls.In the settings menu, you can change the settings for LCD language, voicemail indicators, key tone, CID time synchronization, home area code and dial mode.Go to Answering system settings starting on page 44 for instructions on how to modify the answering system settings shown below.Setting PageAnnouncement (record, play and delete) 44-45Answer on/off 46Call screening 47Number of rings 47Remote access code 48Message alert tone 48Voice language 49To enter the menu:Press MENU/SELECT when the handset or the telephone base is not in use.Press or until the screen displays the desired feature menu. Press MENU/SELECT to enter that menu.To return to the previous menu, press OFF/CANCEL on the handset or CANCEL on the telephone base.To return to idle mode, press and holdOFF/CANCEL on the handset or CANCEL on the telephone base.1.2.3.••Telephone settings

1313Telephone settingsRinger volumeYou can set the ringer volume or turn the ringer off. When the ringer is off, appears on the screen.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Ringers, then press MENU/SELECT.Press MENU/SELECT to select >Ringer volume.Press or to sample each volume level.Press MENU/SELECT to save your selection and return to the previous menu.You hear a confirmation tone.-OR-Press VOL on the telephone base to adjust the ringer volume when the telephone base is not in use.The ringer volume also determines the ringer volume for intercom calls. If the ringer volume is set to off, that device is silenced for all incoming calls.Ringer toneYou can choose from different ringer tones for each handset or the telephone base.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Ringers, then press MENU/SELECT.Press or to highlight >Ringer tone, then pressMENU/SELECT.Press or to sample each ringer tone.Press MENU/SELECT to save your selection and return to the previous menu.You hear a confirmation tone.If you turn off the ringer volume, you will not hear ringer tone samples.1.2.3.4.5.1.2.3.4.5.

1414Telephone settingsLCD languageYou can select a language (English, French or Spanish) to be used in all screen displays.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Settings, then press MENU/SELECT.Press MENU/SELECT to select >LCD language.Press or to highlight English,Français or Español.Press MENU/SELECT to save your selection and return to the previous menu.You hear a confirmation tone.1.2.3.4.5.Clear voicemail indicatorsIf you subscribe to voicemail service offered by your telephone service provider, New voicemail and appear on the handset and the telephone base whenyou have new voicemail messages. Contact your telephone service provider for more information and assistance about using your voicemail service.After you have listened to all new voicemail messages, the indicators on the handset and the telephone base turn off automatically.Use the clear voicemail feature when the telephone indicates that there is new voicemail but there are none (for example, when you have accessed your voicemail while away from home). Clearing the voicemail waiting indicator only turns off the indicators; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators.To manually turn off the new voicemail indicators:Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Settings, then press MENU/SELECT.Press or to highlight >Clr voicemail, then press MENU/SELECT. The screen displays Turn off indicator?Press MENU/SELECT to confirm and return to the previous menu. You hear a confirmation tone.Your telephone service provider may alert you of new messages with a stutter (broken) dial tone. Contact your telephone service provider for details.Key tone1.2.3.4. LCD language>Clr voicemailTurn offindicator?

1515Telephone settingsYou can turn the key tone on or off for each handset or the telephone base. If you turn the key tone off, there are no beeps when you press the handset ortelephone base keys.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Settings, then press MENU/SELECT.Press or to highlight >Key tone, then press MENU/SELECT.Press or to highlight >On or >Off.Press MENU/SELECT to save your selection and return to the previous menu.You hear a confirmation tone.1.2.3.4.5.

1616Telephone settingsSet date and timeThe answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information. You can also turn off the date and time settings of the caller ID service (see CID time synchronization onpage 17) and set the date and time manually.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Settings, then pressMENU/SELECT.Press or to highlight >Set date/time, then pressMENU/SELECT.Press MENU/SELECT to choose >Date & time.Press or to select the month then press MENU/SELECT, or use the dialing keys to enter a two-digit number (01-12).Press or to select the date then press MENU/SELECT, or use the dialing keys to enter a two-digit number (01-31).Press or to select the year then press MENU/SELECT, or use the dialing keys to enter a two-digit number (00-99) then press MENU/SELECT.Press or to select the hour then press MENU/SELECT, or use the dialing keys to enter a two-digit number (01-12).Press or to select the minute then press MENU/SELECT, or use the dialing keys to enter a two-digit number (00-59).Press or to highlight AM or PM, or press 2 for AM or 7 for PM.Press MENU/SELECT to save the settings and return to the previous menu. You hear a confirmation tone.If the date and time are not set when a message is recorded, the system announces, “Time and date not set,” before each message plays.The telephone plays two beeps if you enter an invalid number.••1.2.3.4.5.6.7.8.9.10.11.

1717Telephone settingsCID time synchronizationThis feature allows the time and date to be set by incoming caller ID information. The default setting is On.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Settings, then press MENU/SELECT.Press or to highlight >Set date/time, then pressMENU/SELECT.Press or to highlight >CID time sync, then press MENU/SELECT.Press or to choose >On or >Off.Press MENU/SELECT to save your selection and return to the previous menu.You hear a confirmation tone.Home area codeIf you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Settings, then press MENU/SELECT.Press or to highlight >Home area code, then press MENU/SELECT.Use the dialing keys to enter a three-digit home area code. Press MUTE/DELETE or OFF/CANCEL on the handset, or X/DELETE or CANCEL on the telephone base to delete a digit.Press and hold MUTE/DELETE on the handset, or X/DELETE on the telephone base to delete all digits.Press or to move the cursor to the left or right.Press MENU/SELECT to save your selection and return to the previous menu.You hear a confirmation tone.If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed, following the steps above. After you have deleted the home area code, _ _ _ will appear on the display.1.2.3.4.5.6.1.2.3.4.•••5.

1818Telephone settingsDial modeThe dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone to make a call.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Settings, then press MENU/SELECT.Press or to highlight >Dial mode, then press MENU/SELECT.Press or to choose >Tone or >Pulse.Press MENU/SELECT to save your selection and return to the previous menu.You hear a confirmation tone.WebsiteUse this feature to view the VTech website address.Press MENU/SELECT when the handset or the telephone base is not in use.Press or to highlight >Website, then press MENU/SELECT. The screen displays the website address.1.2.3.4.5.1.2.

19Telephone operationMake a callUsing a cordless handset:Press /FLASH or on the handset. When you hear a dial tone, dial the number. Using the telephone base:Lift the corded handset or press /SPEAKER on the telephone base.When you hear a dial tone, dial the number.Predial a callUsing a cordless handset:Enter the telephone number. Press MUTE/DELETE orOFF/CANCEL to make corrections.Press /FLASH or to dial.Using the telephone base:Enter the telephone number. Press CANCEL or X/DELETEto make corrections.Press /SPEAKER to dial.-OR-Lift the corded handset to dial. The handset/telephone base shows the elapsed time as you talk (in hours, minutes and seconds).While entering numbers, press and hold REDIAL/PAUSE on the cordless handset or telephone base to insert a dialing pause (a p appears).The cordless handset or the telephone base displays Unable to call. Line in use if you predial a number while your telephone line is in use.•••1.2.1.2.1.2.1.2.

Telephone operation20Answer a callUsing a cordless handset:Press /FLASH,or any dialing key (0-9,# or TONE ) to answer a call.Using the telephone base:Lift the corded handset, or press /SPEAKER or any dialing key (0-9,# or TONE ) to answer a call.End a callUsing a cordless handset:Press OFF/CANCEL on the handset or place the handset in the handset charger.Using the telephone base:When you are using the corded handset, place it on the telephone base.When you are using the base speakerphone, press /SPEAKER.SpeakerphoneUsing a cordless handset:When the cordless handset is on a call, press to switch between thespeakerphone and the handset. When the speakerphone is active, the handsetdisplays Speaker and .Using the telephone base:When the corded handset is on a call, press /SPEAKER to switch between the telephone base speakerphone and the corded handset. When the speakerphone is active, the telephone base displays Speaker and the /SPEAKER light turns on.

Telephone operation21Volume controlTo adjust the listening volume on a cordless handset:During a call, press /VOLUME or VOLUME/ .To adjust the listening volume at the telephone base:During a call, press VOL or VOL .For the cordless handset, handset and speakerphone volume settings are independent.For the telephone base, corded handset and speakerphone volume settings are independent.When the volume reaches the minimum or maximum setting, you hear two beeps.•••MuteThe mute function allows you to hear the other party but the other party cannot hear you.To mute a call:Using a cordless handset:During a call, press MUTE/DELETE. The handset displays Muted for a few seconds and MUTE displays until the mute function is turned off. Press MUTE/DELETE again to resume the conversation. The handset brieflydisplays Microphone ON.Using the telephone base:During a call, press MUTE. The telephone base displays Muted for a few seconds and the MUTE light turns on until the mute function is turned off.Press MUTE again to resume the conversation. The telephone base brieflydisplays Microphone ON.Redial••••

Telephone operation22The last 20 telephone numbers dialed (up to 30 digits) are stored in thedialed (up to 30 digits) are stored in the (up to 30 digits) are stored in the system memory.To review and dial a redial number:Using a cordless handset:Press REDIAL/PAUSE to enter the redial list.Press , or REDIAL/PAUSE repeatedly to browse.When the desired entry displays, press /FLASH orto dial.-OR-Press /FLASH or .Press REDIAL/PAUSE to enter the redial list.Press , or REDIAL/PAUSE repeatedly to browse.Press MENU/SELECT to dial the displayed number.Using the telephone base:Press REDIAL/PAUSE to enter the redial list.Press , or REDIAL/PAUSE repeatedly to browse.When the desired entry displays, lift the corded handset or press/SPEAKER to dial.-OR-Lift the corded handset or press /SPEAKER.Press REDIAL/PAUSE to enter the redial list.Press , or REDIAL/PAUSE repeatedly to browse.Press MENU/SELECT to dial the displayed number.To delete a redial number:Using a cordless handset:While the screen displays the desired number, press MUTE/DELETE to delete the number from the redial memory. Using the telephone base:While the screen displays the desired number, press X/DELETE to delete the number from the redial memory.1.2.3.1.2.3.4.1.2.3.1.2.3.4.••

Telephone operation23Call waitingIf you subscribe to call waiting service from your telephone service provider, you hear an alert tone when there is an incoming call while you are on another call.Press /FLASH on the cordless handset or FLASH on the telephone base toput your current call on hold and take the new call.Press /FLASH on the cordless handset or FLASH on the telephone base toswitch back and forth between calls.Temporary ringer silencingWhen the telephone is ringing, you can temporarily silence the ringer of the handset or the telephone base without disconnecting the call. The next call rings normally at the preset volume.To silence the handset ringer:Press OFF/CANCEL or MUTE/DELETE on the handset and it displays Ringer offand .To silence the telephone base ringer:Press MUTE or CANCEL on the telephone base and it displays Ringer offand .Each handset and the base ring when there is an incoming call unless the ringer volume is turned off on that device.••••

Telephone operation24Temporary tone dialingIf you have pulse (rotary) service only, you can switch from pulse to tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services.During a call, press TONE .Use the dialing keys to enter the number you wish to dial. The telephone sends touch-tone signals. The telephone automatically returns to pulse dialing mode after you end the call.Find handset6JKUHGCVWTGJGNRU[QWſPFOKURNCEGFJCPFUGVUTo start the paging tone: Press FIND HANDSET on the telephone base and its screen displays Pagingall handsets. All idle handsets ring and their screens display** Paging **.To stop the paging tone:Press /FLASH,, or any dialing key (0-9,TONEor #) on the handset(s).-OR-Press FIND HANDSET on the telephone base.Press OFF/CANCEL or MUTE/DELETE to turn off the ringer of that handset. Its screen shows Ringer off and .1.2.•••

Telephone operation25Chain dialingUse this feature to initiate a dialing sequence from numbers stored in the directory, call log or redial list while you are on a call.Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, call log or redial list.To access a number from the directory while on a call:Press MENU/SELECT.Press MENU/SELECT to choose >Directory.Press or to scroll to the desired entry.Press MENU/SELECT to dial the displayed number.To access a number from the call log while on a call:Press MENU/SELECT.Press or to highlight >Call log, then pressMENU/SELECT.Press or to scroll to the desired entry.Press MENU/SELECT to dial the displayed number.To access a number from the redial list while on a call:Press REDIAL/PAUSE to enter the redial list. Press , or REDIAL/PAUSE repeatedly to browse to the desired entry.Press MENU/SELECT to dial the displayed number.1.2.3.4.1.2.3.4.1.2.3.

26Join a call in progressAnother handset or the telephone base can join you on an outside call. That call continues until all parties hang up. You can share an outside call with the telephone base and up to four handsets at the same time.You can buy additional expansion handsets (CS6400) for this telephone base. You can register up to 5 handsets to the telephone base.Using a cordless handset:a cordless handset:When a handset or the telephone base is already on a call, press /FLASHor on another handset to join the call.Press OFF/CANCEL or place the handset in the handset charger to end the call. The call continues until all handsets and the telephone base hang up.Using the telephone base:the telephone base:Lift the corded handset or press /SPEAKER.Return the corded handset to the telephone base or press /SPEAKER to hang up. The call continues until all handsets and the telephone base hang up.IntercomUse the intercom feature for conversations between the telephone base and the handset, or two handsets.When you have two or more handsets, use the handset number to initiate an intercom call or to transfer a call.Press 0 for the telephone base and 1-5 for HANDSET 1 to HANDSET 5.•••••Multiple handset use

27Multiple handset useTo initiate an intercom call with a cordless handset:Press INT on your handset when not in use.If you have only one handset, your handset shows Calling base. The telephone base rings and shows HANDSET is calling.If you have more than one handset, your handset shows INTERCOM TO: Use the dialing keys to eenter a device number.Your handset showsCalling HANDSET X or Calling base.The destination device rings and shows HANDSET X is calling.To answer the intercom call on the destination handset, press /FLASH,INT,or any dialing key (0-9,TONEor #). Both handsets now show Intercom.-OR-To answer the intercom call at the telephone base, press/SPEAKER, INT or any dialing key (0-9,TONE or #) on the telephone base, or lift the corded handset. Both devices now show Intercom.To end the intercom call on either handset, one party pressesOFF/CANCEL or INT, or places the handset back in the handset charger. Theother party hears four beeps. Both handsets display Intercom ended.-OR-To end the intercom call at the telephone base, press INT or CANCEL whenyou are using the base speakerphone, or return the corded handset to the telephone base. The other party hears four beeps. Both screens display Intercom ended.You can cancel the intercom call before it is answered by pressing OFF/CANCELor INT.If the destination device does not answer the intercom call within 100 seconds,or if it is accessing the answering system, or is out of range, or is on a call, or is in the directory or call log, your handset displays Unable to call. Try again and then returns to idle mode.You can press OFF/CANCEL or MUTE/DELETE on the cordless handset, or CANCEL or MUTE on the telephone base to temporarily silence the intercom ringer. Only one intercom call can be established at a time.••••Using the telephone base:1.••2.3.

28Multiple handset usePress INT on the telephone base when not in use.If you have only one handset, the telephone base shows CallingHANDSET. The handset rings and shows Base is calling.If you have more than one handset, the telephone base shows INTERCOMTO: Use the dialing keys to enter a handset number. The telephone baseshows Calling HANDSET X. The destination handset rings and shows Base is calling.To answer the intercom call on the destination handset, press /FLASH,INT,or any dialing key (0-9,TONE or #). Both devices now show Intercom.To end the intercom call at the telephone base, press INT or CANCEL whenyou are using the base speakerphone, or return the corded handset to the telephone base. The other party hears four beeps. Both screens display Intercom ended.-OR-To end the intercom call on the destination handset, press OFF/CANCEL orINT, or place the handset back in the handset charger. Both screens display Intercom ended.If you do not have any cordless handset registered to the telephone base, Int requires two handsets displays when you press INT on the base.You can cancel the intercom call before it is answered by pressing CANCELor INT.If the destination handset does not answer the intercom call within 100 seconds,or if it is accessing the answering system, or is out of range, or is on a call, or is in the directory or call log, the telephone base displays Unable to call. Try again and then returns to idle mode.•••Answer an incoming call during an intercom callIf you receive an incoming outside call during an intercom call, you will hear an alert tone.1.••2.3.

29Multiple handset useUsing a cordless handset:To answer the call, press /FLASH. The intercom call ends automatically. To end the intercom call without answering or canceling the incoming call, press OFF/CANCEL. The telephone continues to ring.Using the telephone base:To answer the call, press /SPEAKER, or lift the corded handset. The intercom call ends automatically.To end the intercom call without answering or canceling the incoming call, press CANCEL. The telephone continues to ring.Call transfer using intercomUse the intercom feature to transfer an outside call to another cordless handset or the telephone base.Using a cordless handset:During a call, press INT.If you have only one handset, the outside call is put on hold and yourhandset shows Calling base. The telephone base rings and shows HANDSET is calling.If you have more than one handset, your screen shows INTERCOM TO:Use the dialing keys to eenter a handset number. The outside call is put on hold and your handset shows Calling HANDSET X or Calling base.The other handset or the telephone base rings and shows HANDSET X is calling.To answer the call on the destination handset, press, press /FLASH,INT, ,or any dialing key (0-9,TONE or #). The outside call is still on hold and both handsets display Intercom. You can now have a private intercom conversation.••••1.••2.

30-OR-To answer the call at the telephone base, press INT or /SPEAKER or anydialing key (0-9,TONE or #), or lift the corded handset. The outside call is still on hold and both devices display Intercom. You can now have a private intercom conversation.To cancel the transfer and return to the external call before the intercom call is answered, press OFF/CANCEL,/FLASH or INT on your handset.If the destination device does not answer the intercom call within 100 seconds, or is in the directory or call log, or is out of range, your handset shows Unableto call. Try again and then automatically returns to the external call. ••3. From this intercom call, you have the following options: You can transfer the call. Press MENU/SELECT twice to highlight >Transfer on the originating handset. Your screen shows Call transferred.The destination device automatically connects to the outside call. You can let the destination device join you on the outside call in a three-way conversation. Press MENU/SELECT. Press or to highlight >Sharecall on the originating handset, then press MENU/SELECT.You can press INT on your handset to alternate between the outside call (Outside call appears) and the intercom call (Intercom appears).You can end the intercom call and continue the outside call with theoriginating handset. Press /FLASH or OFF/CANCEL on your handset (the other party hears four beeps), or the other party can press OFF/CANCEL on the handset, or INT or CANCEL on the telephone base.Using the telephone base:1. During a call, press INT.If you have only one handset, the outside call is put on hold and thetelephone base shows Calling HANDSET. The handset rings and shows Base is calling.If you have more than one handset, the telephone base shows INTERCOM TO: Use the dialing keys to eenter a handset number. The outside call is put on hold and the telephone base shows ••••••Multiple handset use

31Multiple handset useCalling HANDSET X. The destination handset shows Base is calling.2. To answer the call on the destination handset, press, press /FLASH,INT, , or any dialing key (0-9,TONE or #). The outside call is still on hold and both devices display Intercom. You can now have a private intercom conversation.To cancel the transfer and return to the external call before the intercom call is answered, press CANCEL or INT on the telephone base.If the destination device does not answer the intercom call within 100 seconds, or is in the directory or call log, or is out of range, the telephone base shows Unable to call. Try again and then automatically returns to the external call. ••3. From this intercom call, you have the following options: You can transfer the call. Press MENU/SELECT twice to highlight >Transfer on the telephone base. The telephone base shows Calltransferred. The handset automatically connects to the outside call. You can let the destination handset join you on the outside call in a three-way conversation. Press MENU/SELECT. Press or to highlight>Share call, then press MENU/SELECT.You can press INT on the telephone base to alternate between the outside call (Outside call appears) and the intercom call (Intercom appears).You can end the intercom call and continue the outside call on the telephone base. Press CANCEL on the telephone base (the other party hears four beeps), or the other party can press OFF/CANCEL on the handset.••••

32About the directoryThe directory stores up to 50 entries with up to 30 digits for each phone number and 15 characters for each name.Directory entries are shared by all handsets and the telephone base. Any modifications made on one device apply to all handsets and the telephone base.When you access the directory without records, the screen showsDirectory empty.When the directory is full and you try to save an entry, the screen shows Directory full.When you try to save an entry already stored in the directory, the screen showsAlready saved.Only one system device can review the directory at a time. When a device tries to enter the directory while another device is already in it, Not available at this time appears.•••••Directory

33DirectoryAdd a directory entryPress MENU/SELECT when the handset or the telephone baseis not in use.Press or to scroll to >Directory, then press MENU/SELECT.Press or to select >Add contact, then press MENU/SELECT.When ENTER NUMBER displays, use the dialing keys to enter a number (up to 30 digits).Press or to move the cursor to the left or right.Press MUTE/DELETE or OFF/CANCEL on the handset, or X/DELETE orCANCEL on the telephone base to erase a digit.Press and hold MUTE/DELETE on the handset, orX/DELETE on the telephone base to erase all digits.Press and hold REDIAL/PAUSE to enter a dialing pause(a p appears).-OR-Copy a number from the redial list by pressing REDIAL/PAUSE then or , or pressing REDIAL/PAUSE repeatedly to find the desired number. Press MENU/SELECT to copy the number.Press MENU/SELECT to move on to the name.When ENTER NAME displays, use the dialing keys to enter a name (up to 15 characters). Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key. Press the key repeatedly until the desired character appears. The first character of every word is capitalized.Press or to move the cursor to the left or right.Press 0to add a space.Press MUTE/DELETE or OFF/CANCEL on the handset, or X/DELETE orCANCEL on the telephone base to eraseto erase a character.Press and hold MUTE/DELETE on the handset, orX/DELETE on the telephone base to erase all characters.Press MENU/SELECT to save. The screen displays Saved and you hear a confirmation tone.1.2.3.4.••••5.6.••••7.

34Directory-OR-Use the dialing keys to enter a number (up to 30 digits) when the handset or the telephone base is not in use. Press MENU/SELECT. The screen displays ENTER NUMBER.Press or to move the cursor to the left or right.Press MUTE/DELETE or OFF/CANCEL on the handset, or X/DELETE orCANCEL on the telephone base to erase a digit.Press and hold MUTE/DELETE on the handset ,or X/DELETE on the telephone base to erase all digits.Press and hold REDIAL/PAUSE to enter a dialing pause (a p appears).-OR-Copy a number from the redial list by pressing REDIAL/PAUSE then or , or pressing REDIAL/PAUSE repeatedly to find the desired number. Press MENU/SELECT to copy the number.Press MENU/SELECT to move on to the name.When ENTER NAME displays, use the dialing keys to enter a name (up to 15 characters). Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key. Press the key repeatedly until the desired character appears. The first character of every word is capitalized.Press or to move the cursor to the left or right.Press 0to add a space.Press MUTE/DELETE or OFF/CANCEL on the handset, or X/DELETE orCANCEL on the telephone base to erase ato erase a character.Press and hold MUTE/DELETE on the handset, or X/DELETE on the telephone base to erase all characters.Press MENU/SELECT to save. The screen displays Saved and you hear a confirmation tone.1.••••2.3.••••4.

35DirectoryReview directory entriesDirectory entries appear alphabetically.Press /on the cordless handset or on the telephone base when not in use to show the first entry in the directory.-OR-Press MENU/SELECT when the handset or telephone base is not in use, then press or to scroll to >Directory. Press MENU/SELECT twice.Press or to browse through the directory.If the telephone number in the directory exceeds 15 digits, <* appears in front of the telephone number. Press TONE to move towards the end of the telephone number or press # (pound key) to move towards the beginning of the telephone number.1.2.Alphabetical searchPress /on a cordless handset or press on the telephone base when not in use.-OR-Press MENU/SELECT when the handset or the telephone base is not in use,then press or to scroll to >Directory, then press MENU/SELECT. PressMENU/SELECT again to select >Review.Use the dialing keys to enter the letter associated with the name. For example, if you have the entries named Jennifer, Jessie, Kevin and Linda inyour directory, press 5 (JKL) once to see Jennifer (when Jennifer displays, press to see Jessie), twice to see Kevin, or three times to see Linda. If there is no name entry matching your search, the next closest match in alphabetical order appears. If necessary, press or to browse.1.2.

36DirectoryDial a directory entrySearch for the desired entry in the directory (see Review directory entries orAlphabetical search on page 35).To dial the displayed entry on the cordless handset, press /FLASH or .-OR-To dial the displayed entry on the telephone base, press /SPEAKER, or lift the corded handset. -OR-Press /FLASH or on the cordless handset, or lift the corded handset or press /SPEAKER on the telephone base.Press MENU/SELECT.Press MENU/SELECT to choose >Directory.Press or or start an alphabetical search to browse to the desired entry, then press MENU/SELECT to dial the displayed number.1.2.1.2.3.4.

37DirectoryEdit a directory entrySearch for the desired entry in the directory (see Review directory entries orAlphabetical search on page 35). Press MENU/SELECT.To edit the name, press MENU/SELECT to highlight >Name. Use the dialing keys to edit the name.Press or to move the cursor to the left or right.Press MUTE/DELETE or OFF/CANCEL on the handset, or X/DELETE orCANCEL on the telephone base to erase a character.Press and hold MUTE/DELETE on the handset,or X/DELETE on the telephone base to erase all characters.-OR-To edit the number, press or to highlight >Number, then press MENU/SELECT. Use the dialing keys to edit the number.Press or to move the cursor to the left or right.Press MUTE/DELETE or OFF/CANCEL on the handset, or X/DELETE orCANCEL on the telephone base to erase a digit.Press and hold MUTE/DELETE on the handset, orX/DELETE on the telephone base to erase all digits.Press and hold REDIAL/PAUSE to enter a dialing pause(a p appears).Press MENU/SELECT to save the entry. The screen displays Saved and then the revised entry. You hear a confirmation tone. Delete a directory entrySearch for the desired entry in the directory (see Review directory entries or Alphabetical search on page 35).Press MUTE/DELETE on the handset or X/DELETE on the telephone base.The screen displays Delete contact?Press MENU/SELECT to confirm. The screen displays Contact deleted and you hear a conformation tone.1.2.•••••••3.1.2.3.

38About the call logThis product supports caller ID services offered by most telephone service providers. Depending on your service subscription, you may see the caller’s number, or the caller’s name and number that are sent by your telephone service RTQXKFGTCHVGTVJGſTUVQTUGEQPFTKPI%CNNGT+&CNNQYU[QWVQUGGVJGPCOGnumber, date and time of calls.Information about caller ID with call waitingCaller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call.It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if:You have both caller ID and call waiting, but as separate services (you mayneed to combine these services).You have only caller ID service, or only call waiting service.You do not subscribe to call log or call waiting services.There are fees for caller ID services. In addition, services may not be available in all areas.This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment. The time and date, along with the call information, are from the telephone service provider.Caller ID information may not be available for every incoming call. Callers may intentionally block their names and/or telephone numbers. To view call log entries with numbers between 16 and 24 digits, you must save the entry to the directory (see page 42).You can use this product with regular caller ID service, or you can use this product’s other features without subscribing to caller ID or combined caller IDwith call waiting service. •••Call log

39Call logIf you subscribe to caller ID service, information about each caller will appear after the first or second ring. If you answer a call before the caller’s information appear on the screen, it will not be saved in the call log.The call log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15 characters for the name. If the phone number has more than 15 digits, only the last 15 digits appear. If the name has more than 15 characters, only the first 15 characters are shown and saved in the call log.Call log entries are shared by all system devices. Any modifications made on one device apply to all.You can review, redial, and copy an entry into the directory.Entries appear in reverse chronological order.When the call log is full, the oldest entry is deleted to make room for new incoming call information.XX Missed calls shows when there are new call log entries that have not been reviewed.Call log empty shows when you access the call log without records.Only one system device can review the call log at a time. If a system device tries to enter the call log while another system device is already in it, its screendisplays Not available at this time.Memory matchIf the incoming telephone number matches the last seven digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory. For example, if Mike Smith calls, his name appears as Mikeif this is how you entered it into your directory.The number shown in the call log will be in the format sent by the telephone service provider. The telephone service provider usually delivers 10-digit phone numbers(area code plus telephone number). If the last seven digits of the incoming phone number does not match a number in your directory, the name will appear as it is delivered by the telephone service provider. ••••••••10:01AM11/20NEWCall log

Call log40Missed call indicatorWhen there are calls that have not been reviewed in the call log, the screens display XX Missed calls. When you have reviewed all the missed calls, the missed call indicator goes away.Each time you review a call log entry marked NEW on the handset or NEW onthe telephone base, the number of missed calls decreases by one.If you do not want to review the missed calls one by one, press and hold OFF/CANCEL on the handset or CANCEL on the telephone base when not in use to clear the missed call indicator. All the entries are then considered old and kept in the call log.Review the call logReview the call logVQſPFQWVYJQECNNGFto return the call, or to copy the caller’s name and number into your directory. 1. Press /CID on the cordless handset or press CIDon the telephone base when not in use.2. Press or to browse.-OR-1. Press MENU/SELECT when the telephone is not in use.2. Press or to scroll to >Call log, then press MENU/SELECT.3. Press MENU/SELECT to select >Review.4. Press or to browse. You hear a double beep when the list reaches the beginning or end of the call log.10:01AM

Call log41View dialing optionsAlthough the call log entries received have 10 digits (the area code plus theseven-digit number), in some areas, you may need to dial only the seven digits,or 1 plus the seven digits, or 1 plus the area code plus the seven digits. You canchange the number of digits that you dial from the call log and store the newnumber to the directory.While reviewing the call log, press #(pound key) repeatedly to display different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory.Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory.When the number is displayed in the correct format for dialing, press /FLASH oron a cordless handset, or press /SPEAKER or lift the corded handset on the telephone base to dial.Dial a call log entryUsing a cordless handset:

Call log421. Search for the desired call log entry (see Review the call log on page 40).2. When the desired entry displays, press /FLASH or to dial.Using the telephone base:1. Search for the desired call log entry (see Review the call log on page 40).2. When the desired entry displays, press /SPEAKER or lift the corded handset to dial.Save a call log entry to the directory1. Search for the desired call log entry (see Review the call log on page 40).2. Press MENU/SELECT to choose an entry. The screen displays EDIT NUMBER.3. Use the dialing keys to edit the number.Press or to move the cursor to the left or right.Press MUTE/DELETE or OFF/CANCEL on the cordless handset, or X/DELETE or CANCEL on the telephone base to backspace and erase a digit.Press and hold MUTE/DELETE on the cordless handset or X/DELETE on the telephone base to erase the entire entry.Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).4. Press MENU/SELECT to move to the name. The screen displays EDIT NAME.5. Use the dialing keys to add or edit the name.Press or to move the cursor to the left and right.Press MUTE/DELETE or OFF/CANCEL on the cordless handset, or X/DELETE or CANCEL on the telephone base to erase a character.Press and hold MUTE/DELETE on the cordless handset or X/DELETE on the telephone base to erase all characters.6. Press MENU/SELECT when done and the screen shows Saved.Delete call log entriesTo delete one entry:•••••••

Call log43Search for the desired call log entry (see Review the call log on page 40).Press MUTE/DELETE on the cordless handset or X/DELETE on the telephone base to delete the displayed entry.To delete all entries:Press MENU/SELECT when the handset or the telephone base is not in use.Press or on to scroll to >Call log, then press MENU/SELECT.Press or to scroll to >Del all calls, then press MENU/SELECT.When the screen shows Delete all calls?, press MENU/SELECT to delete all call log entries. You hear a confirmation tone.Call log display screen messagesDisplays: When:PRIVATE NAME The caller is blocking the name.PRIVATE NUMBER The caller is blocking the telephone number.PRIVATE CALLER The caller is blocking the name and number.UNKNOWN NAME This caller’s name is unavailable.UNKNOWN NUMBER This caller’s number is unavailable.UNKNOWN CALLER No information is available about this caller.1.2.1.2.3.4.

44Answering systemUse the answering system menu of a cordless handset or telephone base to turn on or off the answering system or message alert tone,set up the announcement message, activate the call screening, or change the number of rings, remote access code and voice language. If your answering system is turned off and you change any of its settings, the answering system automatically turns on again.AnnouncementThe telephone is preset with a greeting that answers calls with, “Hello. Please leave a message after the tone.” You can use this preset announcement, or replace it with your own.Record your own announcementYou can record an announcement up to 90 seconds, but any announcement shorter than two seconds will not be recorded.When the handset or the telephone base is not in use,press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press MENU/SELECT again to select >Announcement. The system announces, “To play, press 2. To record, press 7.”Press 7 to record an announcement. The system announces, “Record after the tone. Press 5 when you are done.”After the tone, speak towards the microphone.Press 5 when done. The answering system automatically plays back the newly recorded announcement, then returns to the previous menu.-OR-Press OFF/CANCEL on the cordless handset or CANCEL on the telephone base. The answering system automatically plays back the newly recorded announcement, then returns to the previous menu.Play your announcementWhen the handset or the telephone base is not in use, press MENU/SELECT.1.2.3.4.5.6.1.Answering system settings

45Answering system settingsPress or to scroll to >Answering sys, then press MENU/SELECT.Press MENU/SELECT again to select >Announcement. The system announces, “To play, press 2. To record, press 7.”Press 2 to play the current announcement. Delete your announcementWhen the handset or the telephone base is not in use, press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press MENU/SELECT again to select >Announcement. The system announces, “To play, press 2. To record, press 7.”Press 3 to delete your recorded announcement.When your announcement is deleted, calls are answered with the preset announcement.Answer on/offThe answering system must be turned on to answer and record messages. When 2.3.4.1.2.3.4.

46Answering system settingsthe answering system is turned on, the /ANS ON/OFF light on the telephone base turns on and ANS ON displays on the handset.On the telephone base, press /ANS ON/OFF to turn the answering system on or off. If the answering system is turned on, the base displays Calls will be answered and announces “Calls will be answered.” If the answering system is turned off, the base displays Calls will not be answered and announces “Callswill not be answered.”-OR-When the handset or the telephone base is not in use, press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press or to scroll to >Answer ON/OFF, then press MENU/SELECT.Press or to highlight >On or >Off, then press MENU/SELECT to confirm. You hear a confirmation tone. When you turn on the answering system at the telephone base with no memory capacity left, Memory full displayson the cordless handset and telephone base. The answering system cannot be turned on and it announces,“Memory is full. Calls will not be answered.”If the memory capacity is less than 3 minutes, the telephone announces, “Less than three minutes to record.”Less than 3 min to record displays on the cordless handset and telephone base.••1.2.3.4.

47Answering system settingsCall screeningUse this feature to choose whether incoming messages can be heard when they are being recorded. When the handset or the telephone base is not in use, press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press or to scroll to >Ans sys setup.Press MENU/SELECT twice to select >Call screening.Press or to choose >On or >Off.Press MENU/SELECT to save and you hear aconfirmation tone.Number of ringsYou can choose two, four or six rings, or toll saver. With toll saver selected, theanswering system answers after two rings if you have new messages, and after four rings when there are no new messages. This enables you to check for new messages and avoid paying long distance charges when calling from out of yourlocal area.When the handset or the telephone base is not in use, press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press or to scroll to >Ans sys setup, then press MENU/SELECT.Press or to scroll to ># of rings, then press MENU/SELECT.Press or to choose >6,>4,>2 or >Toll saver.Press MENU/SELECT to save and you hear aconfirmation tone.If you subscribe to voicemail service from your telephone service provider, see Answering system and voicemail on page 50.Remote access codeA two-digit security code is required to access the answering system remotely from any 1.2.3.4.5.6.1.2.3.4.5.6.

48touch-tone telephone. The preset code is 19. You can set the code from 00 to 99.When the handset or the telephone base is not in use, press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press or to scroll to >Ans sys setup, then press MENU/SELECT.Press or to scroll to >Remote code, then press MENU/SELECT.Use the dialing keys to enter a two-digit number.Press MENU/SELECT to save and you hear aconfirmation tone.Message alert toneWhen the message alert tone is set to on, and there is at least one new message, the telephone base beeps every 10 seconds. The message alert tone is preset to off.There is no audible alert at the handset.When the handset or the telephone base is not in use, press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press or to scroll to >Ans sys setup, then press MENU/SELECT.Press or to scroll to >Msg alert tone, then press MENU/SELECT.Press or to choose >On or >Off.Press MENU/SELECT to save and you hear aconfirmation tone.The answering system must be turned on for message alert tone to beep.1.2.3.4.5.6.1.2.3.4.5.6.Answering system settings

49Voice languageYou can select English or French to be used for the voice prompts in youranswering system. The voice language is preset to English.When the handset or the telephone base is not in use, press MENU/SELECT.Press or to scroll to >Answering sys, then press MENU/SELECT.Press or to scroll to >Ans sys setup, then press MENU/SELECT.Press or to scroll to >Voice language, then press MENU/SELECT.Press or to choose >English or >Français.Press MENU/SELECT to save and you hear aconfirmation tone.1.2.3.4.5.6.Answering system settings

50Answering system and voicemailYour telephone has separate indicators for two different types of voice messages: those left on its built-in digital answering system and those left with your telephone service provider’s voicemail (fees may apply). Your telephone’s built-in digital answering system messages and voicemail messages are separate. Each alerts you to new messages differently. If /PLAY/STOPQPVJGVGNGRJQPGDCUGƀCUJGU, displays on the handsets and XX New messages displays on the handsets and telephone base, there are new messages in the built-in answering system. To listen to the messages recorded on your digital answering system, press /PLAY/STOPon the telephone base. To listen to messages with a handset, see To play messages on a cordless handset on page 54.If and New voicemail display on the handset and the telephone base, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, you typically dial an access number provided by your telephone service provider, followed by a security code or PIN. Some telephone service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider. To use your voicemail service rather than your answering system, turn off your answering system. To use your answering system rather than your voicemail service, contact your telephone service provider to deactivate your voicemail service. Using the answering system and voicemail togetherYou can also use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers as described below. To learn how to program your voicemail settings, contact your telephone service provider. Then, if you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message.Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers after six rings, set your answering system to answer after four rings. Some voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting.••Answering system operation

51Answering system operationMessage capacityThe answering system can record and store up to 99 messages. Eachmessage can be up to four minutes in length. The total storage capacity for the announcement, messages and memos is approximately 11 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them.New message indicationThe /PLAY/STOP light on VJGVGNGRJQPGDCUGƀCUJGU, displays on the handsets and XX New messages displays on the handset and telephone base when there are new answering system messages.If the message alert tone is turned on, the telephone base beeps every 10 seconds when there are messages that have not been reviewed.After reviewing new messages, the total number of messages appears on the message window. Call screeningIf the answering system and call screening are on, the announcement and the incoming message broadcast at the telephone base while the call is answered by the answering system.Options while a message is being recorded:Press TVOL or VOL S to adjust the call screening volume.Press /PLAY/STOP to temporarily silence the call screening.Press /PLAY/STOP to temporarily turn on the call screening if call screening is set to off.Call interceptIf you want to talk to the caller whose message is being recorded, press/FLASH or on a cordless handset, or /SPEAKER on the telephone base, or lift the corded handset from the telephone base.•••

52Answering system operationTemporarily turn off the message alert toneIf the message alert tone is turned on (see page 48), the telephone base beeps every 10 seconds when there are new or missed messages. Pressing any telephone base key (except FIND HANDSET) temporarily silences the message alert tone. If you press X/DELETE when in idle mode to temporarily turn off the message alert tone, there is a voice prompt directing you to press X/DELETE again to delete all old messages. The message alert tone is temporarily turned off. Onlypress X/DELETE a second time if you wish to erase all old messages in theanswering system.The message alert tone resumes when you receive a new message.

53Answering system operationMessage playbackWhen playback begins, the total number of old or new messages is announced. Before each message, you hear the day and time of the recording. If the date and time are not set, you hear, “Time and date not set,” before playback. After the last message, you hear, “End of messages.” If the recording time is less than three minutes, you hear, “Less than three minutes to record.” If there are no recorded messages, the screen shows No message and you hear, “You have no message.”To play messages at the telephone base:Press /PLAY/STOP when the telephone base is not in use.-OR-Press MENU/SELECT when the telephone base is not in use.Press MENU/SELECT to select >Play messages.If you have either new or old messages, the messages play automatically.If you have both new and old messages:To play new messages, press MENU/SELECT to select >Play new msgs.To play old messages, press or to highlight >Play old msgs, thenpress MENU/SELECT.Options during playback:Press TVOL or VOL S to adjust the message playback volume.Press /SKIP to skip to the next message.Press /REPEAT to repeat the message. Press twice to hear the previous message. Press X/DELETE to delete the playing message.Press /PLAY/STOP to stop the playback.•1.2.••ůů•••••

54Answering system operationTo play messages on a cordless handset:When the handset is not in use, press MENU/SELECT.Press MENU/SELECT to select >Play messages.If you have either new or old messages, the messages play automatically.If you have both new and old messages:To play new messages, press MENU/SELECT to select >Play new msgs.To play old messages, press or to highlight >Play old msgs, thenpress MENU/SELECT.Options during playback:Press T/VOLUME or S/VOLUME to adjust the message playback volume.Press 6 to skip to the next message.Press 4 to repeat the message. Press 4twice to hear the previous message. Press 3 to delete the playing message.Press 5 to stop the playback.Press to switch between speakerphone mode and handset mode.Delete all old messagesYou can only delete old (reviewed) messages. You cannot delete new messages until you review them. You cannot retrieve deleted messages. To delete all old messages on the telephone base:When the telephone is not in use, press X/DELETE. The system announces, “To delete all old messages, press DELETE again.” The screen displaysDelete all old messages?Press X/DELETE again. The screen displays Deleting... then All old msgs deleted! The system announces, “All old messages deleted.” You hear aconfirmation tone. To delete all old messages on a cordless handset:Press MENU/SELECT when the handset is not in use.Press or to scroll to >Answering sys. Press MENU/SELECT.Press or to highlight >Delete all old, then press MENU/SELECT. Thescreen shows Delete all old messages?Press MENU/SELECT again to confirm. The screen displays Deleting... thenAll old msgs deleted! You hear a confirmation tone. 1.2.••ůů••••••1.2.1.2.3.4.

55Answering system operationRecord, play and delete memosMemos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using a system handset or the telephone base. Play and delete them in the same way as incoming messages (see Message playback on pages 53-54).To record a memo:Press MENU/SELECT when the handset or telephone base is not in use.Press or to highlight >Answering sys, then press MENU/SELECT.Press or to highlight >Record memo, then press MENU/SELECT.The system announces, “Record after the tone. Press 5 when you are done.”After the tone, speak towards the microphone.Press 5, or /PLAY/STOP on the telephone base to stop recording. The system announces, “Recorded.”“Memory is full” is announced if you record a memo when the memory is full.Each memo can be up to four minutes in length.Memos shorter than two seconds are not recorded.•••1.2.3.4.5.

56Answering system operationMessage window displaysWindow display Description0No message.1-99 The total number of old messages recorded. The message number currently playing.If XX New messages displays on the screen at the same time, there are new messages or memos. If Rec mem full displays on the screen at the same time, the memory is full. You must delete some messages before recording new messages.- - The answering system is recording a memo or announcement.The telephone is being accessed remotely.The answering system is being programmed.

57Answering system operationRemote accessA two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19; see Remote access code on page 48 to change it.Dial your telephone number from any touch-tone telephone.When the system plays your announcement, enter the two-digit security code.Then you can enter one of the following remote commands.Command Function1Play all messages.2Play new messages.3Delete the current message (during playback).33 Delete all old messages.4Repeat the current message (during playback).5Stop.*5 Hear a list of remote commands.6Skip to the next message (during playback).*7 Record a new announcement.8End the call.0Turn the answering system on or off.Hang up or press 8 to end the call.If you do not press any keys after you enter the remote access code, all new messages play. If there are no new messages, all old messages play.Once the new messages have played, the telephone announces the help menu options. If you do not press any key within 20 seconds, the remote access call automatically disconnects.When the answering system memory is full, the telephone announces, “Memory is full. Enter the remote access code.”•••1.2.3.4.

58Display screen messagesAlready saved The telephone number you have entered is already in the directory.BASECheck AC powerThe telephone base is on a call while in line power mode. Baseis callingThe telephone base is calling the handset.Call log empty There are no entries in call log history.CalltransferredYou have transferred an outside call to another cordless handset or the telephone base.CallingbaseThe handset is calling the base (for intercom calls). The handset is transferring an outside call to the base.CallingHANDSET(for models with onehandset)The telephone base is calling the handset (for intercom calls).The telephone base is transferring an outside call to the handset.CallingHANDSET X(for models with two or more handsets)The handset or telephone base is calling another handset (for intercom calls).The handset or telephone base is transferring an outside call to another handset.CallansweredThe answering system is answering a call. Calls will be answeredThe answering system is turned on and can answer calls. Calls will notbe answeredThe answering system is turned off and cannot answer calls.Contact deleted A directory entry is deleted. Directory empty There are no directory entries.Directory full The directory is full. You cannot save any new entries unless you delete some current entries.Ended You have just ended a call.Appendix

Appendix59HANDSETis calling(for models with onehandset)The handset is calling the telephone base.HANDSET Xis calling(for models with two or more handsets)Another system handset is calling (for intercom calls).Incoming call There is a call coming in.Int requirestwo handsetsThere are no registered handsets for the telephone base to intercom.Intercom The handset is on an intercom call.Intercom ended The intercom call has just ended.INTERCOM TO:(for models with two or more handsets)You have started the intercom process, and need to enter the number of the handset you wish to call.Line in use An extension phone, or one of the handsets is in use.Low battery The handset battery needs to be recharged.Microphone ON The mute function is turned off and the other party can hear you.Muted The microphone is off. The other party cannot hear you.New voicemail There are new voicemail messages from your telephone service provider.No battery The handset in the handset charger has no battery installed. No line There is no telephone line connection.No signal, call endedThe handset is out of range while on a call. Not availableat this timeSomeone else is using the directory or call log history.Out of range ORNo pwr at baseThe telephone base has lost power, or the handset is out of range.Outside call You are on the external call during call transfer.Display screen messages

Appendix60** Paging ** The cordless handset is paged by the telephone base. Pagingall handsetsThe telephone base is paging the handset(s).Phone The handset is on a call.Place inchargerThe battery is very low. The handset should be charged.1.Press FIND HS on base 4secScreen display before handset registration.Rec mem full The system recording time is full. Rec mem low The system recording time is low. RecordingmessageThe answering system is recording a message. Registering... Please waitThe handset screen display when it is registering to the telephone base.Registration failedThe handset registration is not successful. Registration slots are fullYou register a handset to the base when you already have 5 handsets registered.Ringer off The ringer is off temporarily during an incoming call.Saved The entry in the call log history is saved in the directory.Share call You can share an outside call with the telephone base or another cordless handset. Speaker The handset or telephone base speakerphone is in use.2.Then press # on handsetScreen display before handset registration.Unable to call. Line in useFailed phone call (the telephone line is in use). Unable to call.Try againFailed intercom or conference call (there are already two handsets being used).XX Missed calls There are new calls in the call log.Display screen messages

Appendix61Handset and telephone base indicatorsHandset lightsOn when the handset speakerphone is in use.CHARGE On when the handset is charging in the handset charger.Telephone base lightsIN USE On when the telephone line is in use.On when the answering system is answering a call.On when you are registering a handset.Flashes quickly when there is an incoming call.Flashes when another telephone sharing the same line is in use.Flashes when you are deregistering all handsets./ANS ON/OFF On when the answering system is turned on./SPEAKER On when the speakerphone is on./PLAY/STOP Flashes when there are new memos or messages in the answering system.MUTE On when mute function is on.

Appendix62Handset iconsThe battery icon flashes when the battery is low and needs charging.The battery icon animates when the battery is charging.The battery icon becomes solid when the battery is fully charged.The speakerphone is in use.The handset ringer is off.There are new voicemail received from your telephone service provider.ANS ON The answering system is turned on.There are new answering system messages.NEW There are new call log entries.MUTE The microphone is muted.1/13 The message number currently playing and total number of messages recorded.Telephone base iconsThe telephone base ringer is off.There are new voicemail received from your telephone service provider.NEW There are new call log entries. 13 The total number of messages recorded.

Appendix63BatteryIt takes up to 11 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:Operation Operating timeWhile in handset use (talking*) Up to seven hoursWhile in speakerphone mode (talking*) Up to five hoursWhile not in use (standby**) Up to seven days*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.The battery needs charging when:A new battery is installed in the handset.The handset beeps.A battery is properly installed and the screen is blank.Low battery or Place in charger displays on the handset screen.CAUTION:To reduce the risk of fire or injury, read and follow these instructions:Use only the battery(ies) provided or equivalent. To order a replacement, go to www.vtechphones.com or call 1 (800) 267-7377. In Canada, please visit www.vtechcanada.com or call 1(800)267-7377.Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.Exercise care in handling batteries in order not to create a short circuit with conductive materials.Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.Observe proper polarity orientation between the battery and metallic contacts.To prevent fire or shock hazard, do not expose this product to water or any type of moisture.•••••••••••

Appendix64Expand your telephone systemYour telephone base can support up to 5 handsets. Each handset must be registered to the telephone base before use.The handset provided with your telephone system is already registered and named HANDSET. You can add new handsets (CS6400, purchased separately) to your telephone base. Additional handsets are assigned numbers in the sequential order (HANDSET 2,HANDSET 3,HANDSET 4 and HANDSET 5).Add and register a handset9JGPſTUVRWTEJCUGFeach expansion handset alternately shows 1.Press FIND HS on base 4sec and 2.Then press # on handset. The new handset should be charged without interruption for at least 30 minutes before registering it to the telephone base.To register a handset:Make sure the handset is out of the handset charger and is put near the telephone base. Make sure the handset alternately shows 1.Press FIND HS on base 4sec and2.Then press # on handset before you begin registration.Press and hold FIND HANDSET on the telephone base for about four seconds until the telephone base shows Registering... Please wait, then release the button.Press # (pound key) on the handset. The handsetshows Registering... Please wait. It takes up to 60 seconds to complete registration. Then HANDSET X Registered appears on both screens, with X being the handset number, and the handset beeps.The handset is now registered with the telephone base. If registration fails, the handset displays Registration failed.Please start again from Step 1 above. You cannot register a handset if any other system handset is in use.The telephone base shows Registration slots are full when you try to register more than 5 handsets to it.If you have not set the date and time for the telephone system, the handset will prompt you to set the date and time after it is registered to the base. To skip setting, press OFF/CANCEL.•••1.2.3.2.Then press # on handset1.Press FIND HS on base 4secRegistering...Please waitRegistering...Please waitHANDSET XRegisteredHANDSET XRegistered

Appendix65Deregister handsetsIf you want to replace a handset, or reassign the designated handset number of a registered handset, you must deregister all handsets that are registered to the telephone base. Then register each handset individually.To make deregistration easier, read all of the instructions on this page before you begin.To deregister all handsets:Press and hold FIND HANDSET on the telephone base for about 10 seconds until the telephone base shows Registering... Please wait followed by Deregister all handsets?, then release the FIND HANDSET button.Immediately press MENU/SELECT or FIND HANDSET.The deregistration process takes about 60 seconds to complete. All handsets alternately show 1.Press FIND HS on base 4sec and2.Then press # on handset.To register the handset(s) to the telephone base again, follow the registration instructions on the previous page.You cannot deregister all handsets if any other system handset is in use.If deregistration fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in.Even if the battery is depleted, you can still deregister all handsets by following the steps above. After the handset is charged for at least 10 minutes, its screen alternately shows 1.Press FIND HS on base 4sec and 2.Then press # on handset.•••1.2.3.4.

Appendix66TroubleshootingIf you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com or call 1 (800) 267-7377. In Canada, please visit www.vtechcanada.com or call 1(800)267-7377.My telephone doesn’t work at all.Make sure the power cord is securely plugged in.Make sure you plug the battery connector securely into the cordless handset./CMGUWTG[QWRNWIVJGVGNGRJQPGNKPGEQTFUGEWTGN[CPFſTON[KPVQVJGVGNGRJQPGDCUGand the telephone wall jack.Charge the battery in the cordless handset for at least 11 hours. For optimum daily performance, return the cordless handset to the handset charger when not in use.If the battery is completely depleted, charge the handset for at least 30 minutes beforeuse (page 4).Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.You may need to purchase a new battery. Please refer to Handset battery installation(page 3) and Handset battery charging (page 4).I cannot get a dial tone.First try all the suggestions above.Move the cordless handset closer to the telephone base. You may have moved out of range.If the previous suggestions do not work, disconnect the telephone base from the telephone jack and connect to a different phone. If there is no dial tone on that phone either, the problem is in your wiring or telephone service. Contact your telephone service provider.Your line cord may be defective. Try installing a new line cord.I cannot dial out.Try all the suggestions above.Make sure you have a dial tone before dialing. The cordless handset may take a second QTVYQVQſPFVJGVGNGRJQPGDCUGCPFRTQFWEGCFKCNVQPG6JKUKUPQTOCN9CKVCPGZVTCsecond before dialing.Eliminate any background noise. Noise from a television, radio or other appliances might cause the phone to not dial out properly. If you cannot eliminate the background PQKUGſTUVVT[OWVKPIVJGEQTFNGUUJCPFUGVDGHQTGFKCNKPIQTFKCNKPIHTQOCPQVJGTTQQOwith less background noise.If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).•••••••••••••••

Appendix67TroubleshootingMy cordless handset isn’t performing normally.Make sure you plug the power cord securely into the telephone base. Plug the power adapter into a different, working electrical outlet without a wall switch.Move the cordless handset closer to the telephone base. You may have moved out of range.Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Other electronic products such as HAM Radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Out of range or No pwr at base appears on my cordless handset.Ensure you plug the telephone base in properly and the power is on.Place the cordless handset closer to the telephone base for synchronization.Move the cordless handset closer to the telephone base. You may have moved out of range.Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Other electronic products such as HAM Radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. The batteries do not hold a charge.If the cordless handset is in the handset charger and the charge light is not on, refer to The charge light is off or blinking (page 69).Charge the battery in the cordless handset for at least 11 hours. For optimum daily performance, return the cordless handset to the handset charger when not in use.If the battery is completely depleted, charge the handset for at least 30 minutes beforeuse (page 4).You may need to purchase a new battery. Please refer to Handset battery installation(page 3) and Handset battery charging (page 4).•••••••••••••

Appendix68TroubleshootingI get noise, static, or weak signals even when I’m near the telephone base.If you subscribe to high-speed Internet service (DSL - digital subscriber line) through [QWTVGNGRJQPGNKPG[QWOWUVKPUVCNNC&5.ſNVGTDGVYGGPVJGVGNGRJQPGNKPGEQTFCPFthe telephone wall jack (page 26JGſNVGTRTGXGPVUPQKUGCPFcaller ID problems as a result of DSL interference. Please contact your DSL service provider for more KPHQTOCVKQPCDQWV&5.ſNVGTUYou may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed.Other electronic products such as HAM Radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.If you plug your phone in with a modem or a surge protector, plug the phone (or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector.Relocate your phone to a higher location. The phone may have better reception in a high area.If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).I experience poor sound quality when using the speakerphone. (QTKPETGCUGFUQWPFSWCNKV[YJKNGWUKPIVJGURGCMGTRJQPGRNCEGVJGJCPFUGVQPCƀCVsurface with the dialing keys facing up.I hear other calls while using my phone.Disconnect the telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, call your telephone service provider.The telephone does not ring when there is an incoming call. Make sure that the ringer is not off. Refer to Ringer volume on page 13 in this user’s manual. Make sure you plug in the telephone line cord securely into the telephone base and the telephone jack. Make sure you plug in the power cord securely.The cordless handset may be too far from the telephone base.Charge the battery in the cordless handset for at least 11 hours. For optimum daily performance, return the cordless handset to the handset charger when not in use.You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones.••••••••••••••

Appendix69Troubleshooting6JGNC[QWVQH[QWTJQOGQTQHſEGOKIJVDGNKOKVKPIVJGQRGTCVKPITCPIG6T[OQXKPIthe telephone base to another location, preferably to a higher location.If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges may apply).Other electronic products such as HAM Radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Remove and install the battery again. Place the cordless handset in the handsetcharger. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. Your line cord may be defective. Try installing a new line cord.My calls cut in and out while I’m using my cordless handset.Other electronic products such as HAM Radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.If you plug your phone in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector.Relocate your telephone base to a higher location. The phone may have better reception when installed in a high area.If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).The charge light is off or blinking.Make sure you plug the power and line cords in correctly and securely.Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Clean the cordless handset and handset charger’s charging contacts each month with a pencil eraser or cloth.A blinking CHARGE light is an indication that the battery is not connected to the handset or missing completely. Ensure that the battery is installed properly.•••••••••••••••

Appendix70TroubleshootingMy caller ID isn’t working properly.Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone.The caller must be calling from an area that supports caller ID.Both your and your caller’s telephone service providers must use caller ID compatible equipment.If you subscribe to high-speed Internet service (DSL - digital subscriber line) through [QWTVGNGRJQPGNKPG[QWOWUVKPUVCNNC&5.ſNVGTDGVYGGPVJGVGNGRJQPGNKPGEQTFCPFVJGtelephone wall jack (page 26JGſNVGTRTGXGPVUPQKUGCPFcaller ID problems resulting from DSL interference. Please contact your DSL service provider for more information CDQWV&5.ſNVGTUMy telephone does not receive caller ID when on a call.Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID feature works only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment.The messages on the answering system are incomplete.If a caller leaves a very long message, part of it may be lost when the system disconnects the call after four minutes.If the caller pauses for too long, the system stops recording and disconnects the call.If the system’s memory becomes full during a message, the system stops recording and disconnects the call.If the caller’s voice is very soft, the system may stop recording and disconnect the call.6JGOGUUCIGUCTGXGT[FKHſEWNVVQJGCTPress VOL on the telephone base or /VOLUME on the cordless handset to increase the listening volume.The answering system does not answer after the correct number of rings.• Make sure that the answering system is on. ANS ON should show on the handset and /ANS ON/OFF light on the telephone base should be on.• If toll saver is activated, the number of rings changes to two when you have new messages stored (page 47).• If the memory is full or the system is off, the system will answer after 10 rings.• In some cases, the answering system is affected by the ringing system used by your telephone service provider.••••••••••

Appendix71If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers. To determine how many rings activate your voicemail, contact your telephone service provider.If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.The telephone does not respond to remote commands.• Make sure to enter your remote access code correctly (page 57).• Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot activate the answering system.• The answering system may not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code.• There may be interference on the phone line you are using. Press dialing keys firmly.The answering system does not record messages.• Make sure the answering system is on. ANS ON should show on the handset and /ANS ON/OFF light on the telephone base should be on.• Make sure the memory of the answering system is not full.If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers. To determine how many rings activate your voicemail, contact your telephone service provider.If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.The system announces “Time and day not set.”• You need to reset the system clock (page 16).The outgoing announcement is not clear.• When you record your announcement, make sure you speak in a normal tone of voice, about nine inches from the handset or telephone base.• Make sure there is no background noise (TV, music, etc.) while recording.••••Troubleshooting

Appendix72New voicemail and show and I don’t know why.•Your telephone has both a built-in answering system and voicemail indication. If New voicemail and appear, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from them. Contact your telephone service provider for more information on how to access your voicemail.I cannot retrieve voicemail messages.•Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently. If you subscribe to voicemail service from your telephone service provider, contact your telephone service provider for more information on how to access your voicemail.I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work.Make sure your computer is powered on.Make sure your Internet connection is working properly.Make sure that the software is installed and running for your nontraditional telephone service. Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug into a multiple port USB hub (USB splitter) that is not powered.In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply.+H[QWCTGWUKPICſTGYCNNKVOC[RTGXGPVCEEGUUVQ[QWTPQPVTCFKVKQPCNVGNGRJQPGUGTXKEGprovider. Contact your service provider for more information.Common cure for electronic equipment.If the telephone does not seem to be responding normally, do the following (in the order listed):Disconnect the power to the telephone base.Disconnect the cordless handset battery.Wait a few minutes.Connect power to the telephone base.Install the battery again, and place the cordless handset into the handset charger.Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place.••••••1.2.3.4.5.6.Troubleshooting

Appendix73Important safety instructionsWhen using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:Read and understand all instructions.Follow all warnings and instructions marked on the product.Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.Do not place this product on an unstable table, shelf, stand or other unstable surfaces.Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home or office, consult your dealer or local power company.Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.Do not overload wall outlets and extension cords.Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:When the power supply cord or plug is damaged or frayed.If liquid has been spilled onto the product.If the product has been exposed to rain or water.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.If the product has been dropped and the telephone base and/or handset has been damaged.If the product exhibits a distinct change in performance.Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.Only put the handset of your telephone next to your ear when it is in normal talk mode.The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.SAVE THESE INSTRUCTIONS1.2.3.4.5.6.7.8.9.10.11.12.••••••13.14.15.16.

Appendix74Precautions for users of implanted cardiac pacemakersCardiac pacemakers (applies only to digital cordless telephones):Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:Pacemaker patientsShould keep wireless telephones at least six inches from the pacemaker.Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.Should use the wireless telephone at the ear opposite the pacemaker.WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.Operating rangeThis cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office. When the handset is out of range, the handset displays Out of range OR No pwr at base.If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press /FLASH. Move closer to the telephone base, then press /FLASH to answer the call. If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move closer to the telephone base.MaintenanceTaking care of your telephoneYour telephone contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatmentPlace the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.Avoid waterYour telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.Electrical stormsElectrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms.Cleaning your telephoneYour telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind.•••Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORD FROM THE WALL. Then remove the telephone by the unplugged cords.

Appendix75About cordless telephonesPrivacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical power is interrupted.Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference.Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.•••••The RBRC® sealThe RBRC® seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.The RBRC® program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be illegal in your area.VTech’s participation in RBRC®makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERYTM for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.

Appendix76FCC, ACTA and IC regulationsFCC Part 15This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.This Class B digital apparatus complies with Canadian ICES-003.FCC Part 68 and ACTAThis equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, contact your telephone service provider.This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer.••••

Appendix77If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty.If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned.If this product is equipped with a corded or cordless handset, it is hearing aid compatible.If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:Remain on the line and briefly explain the reason for the call before hanging up.Perform such activities in off-peak hours, such as early morning or late evening.Industry CanadaOperation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.The Ringer Equivalence Number (REN) for this terminal equipment is 0.8. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.This product meets the applicable Industry Canada technical specifications.FCC, ACTA and IC regulations

Appendix78Limited warrantyWhat does this limited warranty cover?The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.How long is the limited warranty period?The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.What is not covered by this limited warranty?This limited warranty does not cover:Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; orProduct that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; orProduct to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; orProduct to the extent that the problem is caused by use with non-VTech accessories; orProduct whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; orProduct purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); orProduct returned without a valid proof of purchase (see item 2 below); orCharges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.1.2.3.4.5.6.7.8.

Appendix79How do you get warranty service?To obtain warranty service, please visit our website at www.vtechphones.com or call 1 (800)595-9511. In Canada, please visit www.vtechcanada.com or call 1(800)267-7377.NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.What must you return with the Product to get warranty service?Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; andInclude a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; andProvide your name, complete and correct mailing address, and telephone number.Other limitationsThis warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification.State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province.Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Please retain your original sales receipt as proof of purchase.1.2.3.Limited warranty

Appendix80Technical specificationsFrequency control Crystal controlled PLL synthesizerTransmit frequency Handset: 1921.536-1928.448 MHzTelephone base: 1921.536-1928.448 MHzChannels 5Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may varyaccording to environmental conditions at the time of use.Power requirements Handset: 2.4V Ni-MH batteryTelephone base: 6V DC @ 400mACharger: 6V AC @ 300mAMemory Directory: 50 memory locations; up to 30 digits and 15 charactersCall log: 50 memory locations; up to 24 digits and 15 characters

81IndexAAbout cordless telephones 75Add a directory entry 33–34Add a handset 64Alphabetical search 35Announcement 44Answer a call 20Answer on/off 46BBase layout 8–9Battery 3, 4, 63CCall log 38Call log message 43Call screening 47, 51Call transfer 29–31Call waiting 23Chain dialing 25Charging 4CID time synchronization 17Clock 16DDate and time 16Delete a call log entry 43Delete a directory entry 37Deregister handsets 65Dial a call log entry 42Dial a directory entry 36Dial mode 18Dialing options 41Directory 32Display screen messages 58EEdit a directory entry 37End a call 20Expand your telephone system 64FFCC, ACTA and IC regulations 76–77Find handset 24Flash 23HHandset battery installation 3Handset icons 62Handset layout 10–11Handset lights 61Handset locator 24Home area code 17IIcons 62Important safety instructions 73Installation 2, 5–7Installation (battery) 3Installation (telephone base) 2Intercom 26–28JJoin a call 26KKey tone 15LLanguage 14, 49LCD language 14Lights 61Limited warranty 78–79MMaintenance 74Make a call 19Memo 55Menu 12Message playback 53–54Message window displays 56Missed call indicator 40Mute 21NNumber of rings 47OOperating range 74Options during message playback 53, 54

82IndexPParts checklist 1Precautions for users of implanted cardiac pacemakers 74Predial 19RRedial 22Register a handset 64Remote access 57Remote access code 48Review the call log 40Ringer tone 13Ringer volume 13SSafety instructions 73Save a call log entry 42Screen messages 43, 58Share a call 26, 30, 31Speakerphone 20TTabletop 76GEJPKECNURGEKſECVKQPU80Telephone base icons 62Telephone base layout 8–9Telephone base lights 61Temporary ringer silencing 23Temporary tone dialing 24Time synchronization 17Troubleshooting 66–72UUsing the menu 12VVoice language 49Voicemail 14, 50Voicemail indicators 14Volume 13, 21, 53, 54WWall mount 5–6Warranty 78–79Website 18

VTECH TELECOMMUNICATIONS LTD.A member of THE VTECH GROUP OF COMPANIES.Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 97008.Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5.Copyright © 2011 for VTECH TELECOMMUNICATIONS LTD.Printed in China.

Navigation menu