VTech Telecommunications 80-5348-01 VTech 5825 & 5850 Handsets User Manual Pages from ip5850 manual D4 Par

VTech Telecommunications Ltd VTech 5825 & 5850 Handsets Pages from ip5850 manual D4 Par

Revised 5850 user manual Part 1

1When using your telephone equipment, basic safety precautions should always befollowed to reduce the risk of fire, electric shock and injury, including the following:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.4. Do not use this product near water (for example, near a bath tub, kitchensink, or swimming pool).4. Do not place this product on an unstable cart, stand, or table. Theproduct may fall, causing serious damage to the product.5. Do not place this product on an unstable cart, stand, or table. Theproduct may fall, causing serious damage to the product.6. Slots and openings in the cabinet and the back or bottom are provided forventilation. To protect it from overheating, these openings must not be blockedby placing the product on the bed, sofa, rug, or other similar surface. Thisproduct should never be placed near or over a radiator or heat register. Thisproduct should not be placed in a built-in installation where proper ventilation isnot provided.7. This product should be operated only from the type of power sourceindicated on the marking label. If you are not sure of the type of power supplyto your home, consult your dealer or local power company.8. Do not allow anything to rest on the power cord. Do not locate this productwhere the cord will be abused by persons walking on it.9. Never push objects of any kind into this product through cabinet slots as theymay touch dangerous voltage points or short out parts that could result in arisk of fire or electric shock. Never spill liquid of any kind on the product.10. To reduce the risk of electric shock, do not disassemble this product, but takeit to an authorized service facility. Opening or removing cabinet parts otherthan specified access doors may expose you to dangerous voltages or otherrisks. Incorrect reassembling can cause electric shock when the appliance issubsequently used.11. Do not overload wall outlets and extension cords as this can result in the riskof fire or electric shock.12. Unplug this product from the wall outlet and contact VTECH under the followingconditions:A. When the power supply cord or plug is damaged or frayed.B. If liquid has been spilled into the product.C. If the product has been exposed to rain or water.D. If the product does not operate normally by following the operating instructions.Adjust only those controls that are covered by the operating instructions,because improper adjustment of other controls may result in damageand will often require extensive work to restore the product to normal operation.E. If the product has been dropped and the cabinet has been damaged.F. If the product exhibits a distinct change in performance.Important Safety Instructions
213. Avoid using a telephone (other than a cordless type) during an electricalstorm. There may be a remote risk of electric shock from lightning.14. Do not use this or any cordless telephone to report a gas leak in the vicinity ofthe leak.SAVE THESE INSTRUCTIONSImportant Safety InstructionsIf you have questions about this product, or ifyou're having difficulty with setup or operation,do not return your phone to the store. Call ourCustomer Support Center at1-800-595-9511In Canada, call1-800-267-7377STOP!!
3This is an advanced cordless telephone, capable of supporting 2 Handsets.This manual is designed to familiarize you with this cordless telephone. We stronglyrecommend you read the manual before using your phone.STOP!!If you have questions about this product, or if you’re having difficulty withsetup or operation, do not return your phone to the store. Call our CustomerSupport Center at 1-800-595-9511 In Canada, call 1-800-267-7377Introduction
41. Base Unit2. Handset3. Handset Charger4. Base AC Power Adapter5. Telephone Line CordParts Check List6. Belt Clip7. Base Wall Mounting Bracket8. Charger Wall Mounting Bracket9. Owner’s Manual10. 6 AAA CellsTo purchase replacement battery cells, call VTech Communications, Inc. at1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at1-800-267-7377.Note: Use only VTech batteries P/N 80-5380-00-00 or equivalent AAA NiMHrechargeable batteries.
51. Antenna2. Earpiece3. Volume Control4. CID5. On (Flash)6. Dialing Keys (0-9, *, #)7. Redial (Pause)8. SpeakerphoneThe Handset Layout9. LCD Display10. Select (Menu)11. Phonebook12. Headset jack (2.5mm)13. Off (Clear)14. Intercom15. Mute (Delete)
61.2.3.4.5.6.7.8.The Base Unit Layout9.10.11.12.13.14.15.
7Connecting power to Base Unit/Handset Charger1. Plug the AC power adapter into an electrical outlet, and the DC connector intothe bottom of the Base Unit.Setup2. Choose the location for your Handset Charger, and plug its power supply intoan electrical outlet.Getting Started
8Installation of Battery Cells in HandsetSetupFollow the steps below:1. Remove the battery cover by pressingon the indent and sliding downward.2. Place the new battery cells in theHandset with the positive andnegative poles aligned in thebattery compartment.3. Replace the battery cover by slidingit upwards.4. If the new battery cells are notalready charged, place theHandset in its Charger, and allow itto charge for 12 hours. After initialcharge, a maintenance charge of 8hours should be sufficient.Getting StartedCharging of the Handset Battery CellsThe Handset of your cordless telephone is powered by rechargeable batterycells. It charges automatically whenever the Hand-set is in its charger.You should charge the battery pack for 12 hourswhen you first receive your phone. You’ll knowthe battery pack needs charging when:• The low battery message is displayed :• The Handset seems completely dead, the LCD is completely clear and doesnot activate when you press the keys.IMPORTANT:1. Do not dispose of battery cell in a fire, the cell may explode.2. Do not open or mutilate the battery cell. Toxic substances may be released,causing harm to eyes or skin.3. Exercise care in handling battery cell in order to prevent an accidental shortof the charge contacts, potentially causing the battery pack to overheat.4. Do not dispose of this battery cell into household garbage. Please refer to theinformation concerning proper battery recycling.
95. Do not charge the battery cell with other electrical device.Connecting to phone linePlug one end of the telephone line cord into the jack on the back of the BaseSetupUnit. Plug the other end of this cord into the walljack.Checking for dial toneAfter the battery is charged, press ON on the Handset. The Phone icon willappear on the Handset display, and you will hear dial tone. If not, see In Case ofDifficulty.Tone/Pulse selectionYour phone is preset for tone dialing. See BASE SETTINGS for details.CAUTION: Use only the VTech power supply provided with your telephone.Getting StartedIMPORTANT:FOR MAXIMUM PERFORMANCE OFYOURCORDLESS TELEPHONE SYSTEM:1. Choose a central location for your BaseUnit.2. Install your Base Unit and ExtensionHandsets way from electronic equipment,such as personal computers, televisionsets and microwave ovens.3. In locations where there are multiplecordless telephones, separate baseunits as much as possible.4. Install your telephone equipment awayfrom heat sources and sunlight.5. Avoid excessive moisture, dust orextreme cold.
10The Wall Mount brackets are designed for use on standard wall mount platesonly. Wall mounting is optional.1. Plug the AC adapters into an electrical outlet, and the DC connector to thebottom of the Base Unit.2. Connect the telephone line cord to the jack on the bottom of the Base Unit,and the other end to the wall jack.3. Line up the tabs on the wall mount adapters with the holes on the bottom ofthe Base Unit/back of the Handset Charger. Snap the wall mount bracketfirmly in place.4. Mount the Base Unit/Handset Charger on the wall. Position the Base Unit/Handset Charger so the mounting studs will fit into the holes on the wallmount bracket. Slide Base Unit/Handset Charger down on the mounting studsuntil it locks into place.Wall MountingGetting Started• Turns on when the microphone is muted• Turns on when there are new call log entries.• CID date and time information• Turns on when the ringer is muted.• Low battery indicator and charging indicatorHandset and Base IndicatorsHandset Icons Icon DescriptionMUTENEW18/8818:88PM

Navigation menu