VIA Technologies P650IVF01-0 57 Inch TFT-LCD Display User Manual

VIA Technologies, Inc. 57 Inch TFT-LCD Display Users Manual

Users Manual

Tentative User Manual V0.1.0 Stretched TFT-LCD Display Model VIA P650IVF01.0 VIA Technologies, Inc. 1F, 531 Zhongzheng Rd., Xindian Dist. New Taipei City – 231, Taiwan, R.O.C
Index Important Product Safety Instructions ............................................................................................................................. 1 Safety Precautions and Maintenance ........................................................................................................................ 1 To reduce the risk of electric shock or damage to the equipment ................................................................... 2 Declaration of Conformity ......................................................................................................................................... 2 IMPORTANT NOTE ................................................................................................................................................... 2 Federal Communications Commission (FCC) Statement ................................................................................... 2 Overloading Outlets .................................................................................................................................................... 3 Other Notices and Precautions ................................................................................................................................ 3 Proper Positioning of Display .................................................................................................................................... 3 Ventilation .............................................................................................................................................................................. 4 Cleaning .......................................................................................................................................................................... 4 Power Cord Protection .............................................................................................................................................. 4 Introduction ............................................................................................................................................................................ 5 Functions and Features ............................................................................................................................................... 5 Package Content ........................................................................................................................................................... 6 Product Overview ................................................................................................................................................................. 6 Connections .................................................................................................................................................................. 7 Firmware Upgrade by Inserting USB Stick.............................................................................................................. 7 Connect Signal Cables ................................................................................................................................................. 8 Control Panel ................................................................................................................................................................ 8 Installation ............................................................................................................................................................................... 9 Install Remote Control Batteries .............................................................................................................................. 9 Using the Remote Control ................................................................................................................................................ 10 The OSD Functions ............................................................................................................................................................ 11 INPUT SOURCE ........................................................................................................................................................ 11 PICTURE ...................................................................................................................................................................... 12 SETUP ........................................................................................................................................................................... 12 More Information ................................................................................................................................................................ 13 Supported Timing Mode ............................................................................................................................................ 13 Input Video Pattern Guideline ................................................................................................................................. 14 Product Specification .......................................................................................................................................................... 15 Dimensions .................................................................................................................................................................. 17 Other Notices ...................................................................................................................................................................... 18 Operation and Maintenance Guide ................................................................................................................................. 18 MagicView User Guide ....................................................................................................................................................... 27 BIOS Setup ............................................................................................................................................................................ 70
1 Important Product Safety Instructions Use for control, adjustments, or procedures other than those specified in this document may result in exposure to shock, electrical hazard and/or mechanical hazards. Use this product in environments with ambient temperatures of 0˚C ~50˚C. Do not leave this product in an environment where the storage temperature is below -40° C or above 110° C. The product must be used in a controlled environment. WARNING • Do not use this product near water or a heat source. • Do not spill water or any other liquids on this product. • Do not place heavy objects on the top of this product. Safety Precautions and Maintenance • Read carefully and follow all warnings and instructions in this document and those marked on the product before you operate your display. Failure to follow warnings can result in personal injury or damage to product. Keep this document in a convenient location for future reference. • This product should be operated from the type of power indicated on the marked label.The attached AC adapter is designed for use with this product. • To use a different ac adapter, use only a power source and connection compatible with this product. If you are not sure of the type of power available, consult your dealer or local power company. • An approved power cord greater or equal to H03VV-F or H05VV-F 3G, 0.75 mm² or 18AWG must be used. • This device must be operated with the original power supply. • The socket-outlet should be installed near the equipment and should be easily accessible. • Use a power cable that is properly grounded.Always use the appropriate AC cord that is certified for the individual country. Some examples are listed in below table: Country Safety Certificate USA UL Switzerland SEV Canada CSA Germany VDE Britain BASE/BS Japan Electric Appliance Control Act • Do not place inflammables/volatile matter/liquids near by the product. To reduce the risk of electric shock or damage to the equipment • Do not disable the power cord grounding plug.The grounding plug is an important safety feature.
2 • Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. • Disconnect power from the equipment by unplugging the power cord from the electrical outlet. • Do not place anything on power cords or cables.Arrange them so that no one may accidentally step on or trip over them. • Do not pull on a cord or cable. • Always grasp the cord by the plug, while unplugging from the electrical outlet. • Always plug in the DC connector first, then plug in the AC connector. Declaration of Conformity FCC Part 15.19 Caution: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
3 interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Overloading Outlets Do not overload electrical power sources when installing the display. Overloading wall outlets, circuits, or extension cords can result in overheating, fire, or electric shock. Use only grounded or polarized outlets. Other Notices and Precautions • Never remove the rear cover.There are no user serviceable parts inside.Your display contains high-voltage parts.You may be seriously injured if you touch them. • Do not attempt repairs yourself.Your warranty does not cover repairs or attempted repairs by anyone not authorized by VIA. • Refer all servicing and repairs to qualified service personnel. • If smoke, abnormal noise or strange odor is present, immediately unplug the power cord. Contact a qualified service technician. • If your display will not be used for extended periods of time, unplug the power cord and remove the batteries from the remote control. • Do not scratch the surface of the display with any sharp objection. Proper Positioning of Display • Always handle your display with care.Avoid touching the screen. Skin oils are difficult to remove. • Always position your display on a stable and level surface or mount it on a wall. Unstable surfaces can cause your display to topple and fall, resulting in possible damage or injury. • Avoid exposing the display to direct sunlight or high temperatures, which can damage or shorten its useful life. • Do not place near heat sources such as radiators, heat registers, or other appliances that generate heat. • Avoid exposing the display to rain, water, moisture or high humidity. • Do not place your display near basins or sinks where it may come in contact with water. • Orient your display s away from direct sunlight to reduce glare. • Never place heavy or sharp objects on the display, video cable, or power cord.
4 Ventilation • Slots and openings on the cabinet are provided for ventilation purposes.To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Keep the display a minimum of 4 inches/10 cm away from any wall to assure sufficient airflow and ventilation. Increased temperatures may cause fire or device failure. • To assure proper ventilation, do not block the openings by placing the display on a bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an enclosed rack, unless proper ventilation is provided. Cleaning Make sure the display is turned off and never spray or pour liquid directly onto the screen or case.  To clean the screen: - Wipe the screen with a clean, soft, lint-free cloth.This removes dust and other particles. - If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.  To clean the enclosure: - Use a soft, dry cloth. - If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface. Disclaimer VIA does not recommend the use of any ammonia or alcohol-based cleaners on the display screen. Some chemical cleaners have been reported to damage the screen and/or display signage box.VIA will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. Power Cord Protection • Minimize wear on power supply cords. Power supply cords should be routed away from foot traffic and contact with other objects. • Do not route power cord under rugs or carpeting. • The cord should never be severely bent, pinched, or twisted. • Periodically inspect power cords for wear or damage, particularly near plug and the point where it exits from the product. • Unplug cord and discontinue use if damage is discovered.
5 IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and may look like this: Figure A1 Figure A2 Introduction This manual will explain the operation of P650IVF01.0, including functions, features and other important information. Before installing or operation your display, please take time to read the manual, particular the sections on safety. Functions and Features • 1920 x 376 image resolution • 450 nits brightness • 4000:1 contrast ratio • LED backlight source • VGA,Video Graphics Array • DVI, Digital Visual Interface • HDMI digital, high –definition multimedia interface • USB flash disk for monitor firmware upgrade
6 Package Content LCD Display Power Cord Adapter Remote Controller Product Overview
7 Connections Firmware Upgrade by Inserting USB Stick You can upgrade the monitor firmware by the steps as follows: 1. Select a empty USB stick, and copy the firmware file (M57ML2DG181**.bin) into the root in USB stick. 2. Turn on the monitor, select VGA or DVI or HDMI input, plugging in the USB stick. 3. Enter OSD menu, and select software update item. 4. Select “Yes” to upgrade.
8 Connect Signal Cables The connection between the signal source and the display is: Signal Source Description Connection Cable D-Sub (15-pin) Cable Note: This cable is not including in the accessory. DVI Cable Note:This cable is not including in the accessory. HDMI Note:This cable is not including in the accessory. Control Panel Item Function Power OSD Exit Menu Left Right Down Up
9 Installation Install Remote Control Batteries Remove the battery cover. Install batteries. Re-attached the batter support. Note:AAA batteries need to be purchased by the customers. CAUTION • Dispose of the battery in accordance with local laws and regulations. • Keep the battery away from children and pets. • When the remote control will not be used for an extended period, remove the batteries.
10 Using the Remote Control Keypad Function Switch power on or power off No support No support No support No support No support No support No support No support No support No support No support No support No support No support information Zoom mode setting
11 No support Enter setup menu Input source setting (Support only for HDMI/VGA/DVI) Exit No support UP Left Right Down Enter No support No support No support Image mode setting (Support only for HDMI/VGA/DVI) ~ No support No support No support
11 The OSD Functions INPUT SOURCE Item Selection Description Input Source HDMI DVI VGA To select the input signal source. PICTURE ( Press to enter Setup page; press to enter USB page; press for each item selecting ) Item Selection Description Picture Mode (Support only for HDMI/VGA/DVI) Note: Sharpness, Saturation & Hue and Color can be selected only for video signal Standard Dynamic Soft To select the type of preset picture mode that suit your personal preference or viewing requirement. Personal To manual configure following picture setting to suit your personal preference or viewing requirement. Contrast Brightness Sharpness Hue Saturation To adjust the contrast level of picture. To adjust the brightness level of picture. To adjust the edge definition of picture. To adjust the color hue of picture. To adjust the color saturation of picture. Color Mode Cool Normal Warm User Color temperature adjustment, you can select cool mode/Normal mode/warm mode/User mode. Auto Adjust (Only for input source is set to VGA) H-Pos. V-Pos. Clock Phase Auto To manually adjust the position of display area left or right. To manually adjust the position of display area up or down. To manually adjust the width of display image. To manually sharpen the focus of text or graphic with pixel boundaries. To automatically adjust incoming VGA signal to optimal status for displaying.
12 Zoom Mode Full Zoom 4:3 16:9 Set the picture to Full screen. Set the picture to Zoom mode, for set the display bar position (Top area, Middle Area, Bottom Area.), Set the picture to 4:3 format and put black borders on the left and right of picture. Set the picture to 16: 9 format and put black borders on the left and right of picture. Backlight 0~100 To adjust the brightness of LED backlight. SETUP Item Selection Description Menu Language English, Chinese Traditional, Chinese Simplified To select menu displaying language. SW Version FW Version Restore Default Yes No To restore all setting of menu to default factory setting. Auto Wake-up On Off Software Update(USB) Yes No To proceed software update via USB driver (Only available for authorized technician).
13 More Information Supported Timing Mode The supported timing modes for VGA signal / HDMI signal are: Timing Mode Resolution VGA 640x480@60Hz 640x480@72Hz 640x480@75Hz SVGA 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz XGA 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz SXGA 1152x864@75Hz 1280x1024@60Hz 1280x1024@75Hz WXGA 1366x768@60Hz 1440x900@60Hz WSXGA+ 1680x1050@60Hz SD NTSC 480i NTSC 480p HD NTSC 720p Full HD 1080i 1080p
14 Input Video Pattern Guideline  Please select FHD pattern and input FHD video signal to the monitor.  Please allocate the display content such as video/photo on the top area. Note: It will be better to input 10 bits signal into the monitor.
15 Product Specification Model P650IVF01.0 Panel LCD Size 65” LCD Vendor VIA Light Source LED Active Area (mm) 1428.5±1(H) x280±1(V) mm Resolution Special format (1920x376) Aspect Ratio 16:3.13 Brightness (typ) 450 cd/m2 Contrast Ratio (typ.) 4000:1 Response Time (ms) 8 (Typ) Frame Rate 60 Viewing Angle 178 degree (H) / 178 degree (V) with CR≧10 Light Life 100,000 hrs Panel Surface Anti-Glare, 3H, Haze = 2% Color gamut (x% NTSC) 72% Power Power supply AC 100V~240V ( 50/60Hz) DC Input 24V , 6.67 A Power consumption (Watt) ≦100W (w/o IPC , WiFi) Standby Power (Watt) <0.5W(w/o IPC , WiFi) Display IPC IOry HDMI X 1(IPC Used)/ COM(IPC Used) X 1/ RJ45 X 2/ USB X 4 Monitor IO HDMI X 1(IPC Used)/ DVI-D X 1/ VGA X 1/ USB X 1/ COM X1(IPC Used) Audio - Audio W (Amp) - Control RS232, Keypad and Remote Controller Dimension (Lx W x D mm) 1464.5±2 x 316±2 x 60±1(Without Adaptor) mm Weight 16.1±0.5 kg Border width (U/D/R/L) 16.0/16.0/16.0/16.0 mm OSD Control IR OSD Language 繁體中文 / 简体中文 / English Wall Mounting 400mmX100mm Color Black Display Orientation Landscape / Portrait (Except OSD) Packing Package size (W x H x D) 1642 ±1 (W) x 450 ±1 (H) x 226±1 (D) mm Package weight 23.3±1 kg AC Adapter X 1, including AC in power cable (UK Type)
16 Accessory Remote Controller X 1 , w/o battery HDMI Cable X 1 RS-232 Cable X 1, (male to female, Tx/Rx non-swap) IPC Main Board X 1 including installed OS inside, Fixed to FHD output on HDMI out IPC Main Board Cover X 1 Power Wire for IPC X 1 WiFi Antenna X 2, including wire Left WiFi Cover X 1 HDMI/RS-232 Cover X 1
17 Dimensions
18 Other Notices • The display is able to remember the last input source before it is turned off by control panel. Next time when you turn on the display, it will present the last file via the last input directly. If the previous input source has been removed, you need to switch to the new input source manually. • If a regular image is displayed on the displayed screen for a long period of time, it might occur “imprint”, which may result to permanent defected images on the screen.This is called screen burn-in or imprint, thus this specific issue is not covered within the guarantee scope. • If the proportional selection’ display screen for a long period of time is 4:3, screen burn-in may appear at the black and image of the screen. • In order to prevent the occurrence of residual shadow, avoid to display a regular image for a long period of time on the display screen (TFT-LCD more than two hours, Plasma display panel more than one hour) • Avoid stationary images as much as possible. Stationary images are images that remain onscreen for extended periods of time. Stationary images include onscreen menus, black bars, time displays, etc. • Please plug in only one source. If multiple source (i.e.VGA/DVI/HDMI & USB stick) are plugged into the I/P ports, the system might be unstable. Operation and Maintenance Guide Before Getting Started • This product is a highly integrated product featuring a LCD and IPC, with building Windows 10 IoT 64bit operating system and VIA MagicView software. Relevant OS configurations have been made in advance so that when you receive the product, simply connect it to power and the system will automatically run the startup process and MagicView Client. • When you turn on the product for the first time, you will be asked to make a few simple settings in order to fully activate the product and have it connected to the Digital Signage Monitoring System Server to commence online operation. And as such, it is recommended that you complete the following settings before installing the LCD Panel at the designated premise. 1. Connect to keyboard and mouse USB ports(IPC) are available at the back of the LCD Panel for keyboard and mouse to be connected. The USB ports(IPC) is next to the RJ45 port.
19 2. Starting up When the LCD is connected to power, it will automatically run the startup program and show the default logo screen. Please press Ctrl+Q to return to OS desktop. 3. Network configuration a. Press on the keyboard and select (Settings) b. Select “Network and Internet” c. Select ”Wi-Fi” d. Make sure your Wi-Fi is activated e. Select ”Show available networks” f. A list of Wi-Fi networks available will pop up at the lower right of the screen; select your Wi-Fi network to be connected Note: For Wi-Fi connections involving specific settings (i.e. security verification, connection to hidden SSID and so forth), relevant IT specifications will apply. Please have your IT personnel to resolve relevant connection issues.
20 4. Starting Windows / Renaming the computer a. Press on the keyboard and select (Settings) b. Select ”System”
21 c. Click “About”
22 d. Click “Renaming the computer” to change the name of the computer; click “Change product key or upgrade your edition of Windows” to enter product key e. Once you have entered the correct key, Windows will be activated f. Once Windows has been activated, it will be bound to the H/W and the key you have used. It is therefore recommended that you put the sticker of the key on the back of the LCD so that you can easily locate it when you need to enter the key again in the future.
23 5. Registering your MagicView Client on the MagicView Server a. Press on the keyboard  select VIA select MagicView Client Configure” and you will be taken to the page as shown below: b. COM setting: 1. Screen Type: Refers to below table to select screen type. c. Player setting 1. Decoder format setting: simply check the YV12 box. LCD Module Screen Type VIA P65IVF1.0 VIA P65IVF1.0 VIA P65IVF2.0 VIA P65IVF2.0 VIA VT32LLUM VIA VT32LLUM VIA VT55LLUM VIA VT55LLUM VIA VT65LLUM VIA VT65LLUM
24 d. Server Setting 1. Client Hardware ID: this cannot be changed (this ID can be used for offline registration in the UI) 2. Server Address: enter the Server IP 3. User name: admin 4. Password: admin 5. Client Name: assign different client name for different LCD panels in order to ensure easy identification in MagicView 6. Click “Save” 7. Click “Register Client” 8. When you see “Register Succeed “(The setting has been saved)!,”click “Ok”. 9. Click “Close”
25 6. Running MagicView Client Press on the keyboard  select VIA select MagicView Client”. This will get the MagicView Client running officially and when you restart the system, it will automatically run MagicView Client and try to connect to the Server. Notice: Regarding powering off • As the IPC in the LCD shares the same power with the LCD’s power board, the only way to turn off IPC (i.e. windows shutdown)while LCD power is on is to unplug the power cord from the LCD and plug the power cord back to restart IPC. • If the windows system freezes during operation, please unplug the power cord from the LCD and plug it back in to restart the IPC. • Turning the LCD off directly without shutting down the IPC first may damage the windows system. And as such, if you wish to turn off the LCD for purposes of disassembly, be sure to perform the shutdown process for windows. • Procedure to turn off the Windows:  Press Ctrl+Q to return to OS desktop, right-click the Start button, you'll see a lengthy pop-up
26 shortcut menu -- with "Shut down or sign out" right near the bottom. Mouse over that option and then click "Shut down." • If you wish to restart IPC but find it difficult to unplug the power cord when the LCD is installed in a suspended configuration, simply restart the relay of the power supply to restart IPC.
27 MagicView User Guide The MagicView featured for this product has been custom designed by VIA for Hong Kong International Airport. The following contents are only meant as a reference for users to familiarize themselves with the various features of MagicView. For official SOPs, please refer to the definitions provided by C&R. Playlist Publish Upload Media Files Step 1: click “Media” button; Step2: choose “General Media” type; Step3: click to upload media files:
28 Step 4: The uploaded files are in the audit list. Users need approve them before using: Create Playlist Step 1: click “Playlist” button. Step 2: click and pop-up a dialog, fill in name and select resolution as Refer to player:
29 Step 3: Select videowall group and begin to design playlist in the designer area: Step 4: click at left side and choose template to create new scene:
30 Now users can find the videowall layout in the designer area: Step 5: click to create layers: Step 6: Add media files to layers. Select the layer you need to add, and then click to add the media file in the media list.
31 Step 7: Click the button to save the scene and approve it. The next step is to schedule the playlist.
32 Schedule Step 1: Select the player group. Step 2: Move the pointer to the calendar region. Press the left-button and drag the mouse, the following dialog box will pop up. Step 3: Set start/end date and time. Step 4: Click to publish program. After the steps of “upload media files”, “create playlist” and “schedule”, we finish the process of program designing and publishing. If network is working, player will playback the program after downloading the playlists.
33 Advanced Tutorial Media MagicView supports the following formats: 1. Normal:  Video  Encoder： ALTA DS2: H.264 ALTA DS4K/A910: H.264、H.265  Container：.mp4、.mkv、.mov  Max resolution ALTA DS2: 1x1080P Full HD ALTA DS 4K/A910: 1x4k Full HD (16:9 only)  Image：  .jpg、.jpeg、.bmp、.png  Max resolution：8kx4k  Audio：  Encoder：aac、mp3  container：.mp3 2. Marquee 3. PPT、pptx、pdf (Need install TranscodeEngine and Apache Openoffice) 4. Widget：Weather、Clock、RSS、APK 5. webpage 6. Streaming：RTSP
34 Create New Folder Step 1: Click on the left navigation area of a class of media files or directories. Step 2: Click the button ，the following dialog box will be shown: Step 3 : Input the name and description (Description is optional), then click the button “ok”, the new folder is now created. Create New Media files For the different type of media, there are three ways to create them. Note: After successfully creating a new media file, the message “Success to create media file, it’s needed to be approved” will pop up in the bottom right corner. Only approved media can be used. For details about how to approve, please refer to Approve. Upload general media file Step 1 : First, click “General media file” in the left navigation bar, and then click ，the following dialog will be shown:
35 Step 2: Select the media files. Create Marquee Step 1: First, click the “Marquee” in the left navigation bar, and then the button , the following dialog box will be shown;
36 Create streaming/web page Step 1: First, click the “Streaming” in the left navigation bar, then the button , the following dialog box will be shown; : the start point of coordinate of the webpage.
37 : scaling the webpage. Create time widget Step 1: First, click the “Widget” in the left navigation bar, and then the button , the following dialog box will be shown: Step 2: Input the name and define the attributes of the widget, then click the button “ ” to save it.  Two types of Time: Digital or Analog;  Language: Simplified Chinese, Traditional Chinese or English;  Time format: 12 hour or 24 hour;  Time zone;  Transparence;  Date and week.
38 Create Weather Widget Step 1: Select the widget – Weather: Step 2: Create city weather and define the attributes of the widget: • Name; • Language: Simplified Chinese, Traditional Chinese or English; • City: click and search the city; • Transparence; • Weather proxy: When the player can not access weather source from internet directly, users need configure a weather proxy to visit weather source.
39 Create APK widget Step 1: Install the APK which would be played at player side; Step 2: Find the package name of the APK at player side: Method: • At player side, press hotkey of “Ctrl +Q”, Input user name and password (default is admin/admin) and backward to desktop; • Run Client Configure; • Click “Show Android Setting “and list the APK package name/ Back to web UI, and begin to create APK. Step 3: Select the widget – APK: Step 4 : Create APK: Package name: refer to Figure2-2-2-10. Eg: the package name of APK “angrybirds”is “com.rovio.angrybirds”.
40 Create RSS Widget Step 1: Select “RSS”widget; Step 2: Fill in content: Source Address: input RSS server’s IP address. Click , the page will display RSS content; Flush time: time interval that MagicView request content from RSS server; Switch time: time interval that RSS content are updated at MagicView web UI.
41 Playlist Main page: How to Create Playlist Click the button ，and the following dialog box will pop up.
42  Resolution: it is the size of block. There are four types for reference: a. Predefined size. For example, 1920x1080,1024x768 etc; b. Customized； c. Refer to the player layout； d. Refer to screen block: because the playlist is published to one block of the layout. It usually applies to videowall.  Add tags.  For interactive application. Please refer to Interactive Playlist. Edit Playlist Use designer to edit playlist. The following figure is the designer interface.
43 There are four areas of this designer interface:  Scene area: display scene list;  Designer area: the main design area, display the effect of the scene, including the layer location, the media  Media area: display media list of this layer;  Toolbar area: function icons. Step 1: Click the button to create a new scene. One playlist is composed of one or more scenes. Default is a blank template.
44 Click at the left side, users can add more scenes. Moving the mouse to the scene, users can delete, copy the scene or the scene to save as a template. Step 2 : Click the button “ ” to create a layer. One scene is composed of one or more layers.
45 The following is the function icons of the toolbar: ：Check the attributes of the playlist. Users can modify the playlist name. Note: Once the playlist is created, the resolution cannot be modified. ：Layer’s coordinate. ：Close the design window and return to playlist. ：Add layer. This layer doesn’t support marquee and Android APK types. ：Add Text layer. ：Add Android APK layer. ：Delete layer. ：List more function buttons as below: ：Fullscreen of the selected layers. ：Fill with single screen. Only for videowall. ：Indicate that the current interface is editable. Press this button to lock the edit interface. ：The current edit scene can be enlarged or reduced. ：Preview playlist.
46 ：Save the playlist. ：Save as… the playlist. ：Left aligned for the selected layers(two or more layers) ：Right aligned for the selected layers(two or more layers) ：Top aligned for the selected layers(two or more layers) ：Bottom aligned for the selected layers(two or more layers) ：Two layers close to each other horizontally ：Two layers close to each other vertically ：Move the layer up ：Move the layer down ：Copy layer. ：Paste layer. Note: Select two or more layers by hotkey “shift”. The layer can rotate and zoom in/out with the mouse. Step 3 : Add media files to layers. Select the layer you need to add, and then click to add the media file in the media list.
47 Note: Media files are available only after they are approved. For details about how to approve, please refer to chapter to Approve. Step 4 : Edit the features of media playback.  Video: a. Duration. The default duration is 15s. User can modify it. b. The videos in the same directory can be multi-selected, but users cannot modify the duration.  Picture: a. Duration. The default duration is 15s. User can modify it.
48 b. The pictures in the same directory can be multi-selected. c. Transition effect. If user selects transition effect, the duration cannot be 0s.  Text: a. Reference file: this option, said the marquee file is not modified. Do not check, said marquee can be modified; the modified file is not synchronized to the media library, only for this playlist. Select the marquee, and edit marquee attributes in the right area: a. Two types of Text: static and marquee; b. Edit the font type, size and color;
49 c. Background color; d. Transparency; e. The speed of marquee: Slow, Medium and Fast; user can modify the speed according to reference time. Note: Change the playback order by dragging the published media file. Step 5：Click the button to save the scene. A new scene is created. Step 6：Add other scene again according to the above steps. A new playlist is creatd. Schedule Schedule is for player group, it includes layout, media, playback time, etc. Create the schedule
50 Step 1：Select the player group. Step 2：Select the block in the layout preview. (If there is only one block in the layout, it is selected by default.) Step 3：Move the pointer to the calendar region. Press the right-button and drag the mouse, the following dialog box will pop up. Choose one playlist and set start/end time/date. The following example is based on the following configuration:
51 Start time is set to 2:30; end time is 18:45. Start date is Dec 11, 2015; end date is Dec 24, 2015. Loop type:  Not loop: it means the playback time is from the start time of the start date to the end time of the end date. For example: It means the playlist will play from Dec 11, 2015, at 2:30 to Dec 24, 2015, at 18:45.  Loop every day. Within the selected date, each day is fixed within a fixed time. For example: Every day from Dec 11, 2015, at 2:30 to Dec 24, 2015, at 18:45.  Loop every week. For example: The playlist will play from 2:30 to 18:45 every Tuesday and Friday from Dec 11, 2015 to Dec 24, 2015. There is a " " identification of the schedule, which means that the program is a loop mode. Step 4：Select the playlist and define the schedule, then click the button “ok” to the main window of schedule.
52 Step 5：Click the button to publish the schedule. The color in the schedule block will be changed from orange to blue. Modify the schedule There are three ways to modify the schedule. 1. First, select the schedule, then click the button , the following dialog box will pop up;
53 The way is common one. User can get the accurate schedule by redefining the start time, end time, start date, end date and loop mode. 2. Select the schedule, then hold the left mouse and drag the rectangle to modify the start time, end time, start date and end date. However, the loop mode and the whole playback time will stay. 3. Select the schedule, move the pointer over the top edge or bottom edge of the rectangle, it changes to a two-way arrow. Drag the two-way arrow to modify the start time or end time. However, the start date, end date and loop mode will stay, they cannot be modified. 4. Select the schedule, click then set another duration, click to copy:
54 5. Click to modify schedule: ：Horizontal copy. User can copy date and loop mode: ：Vertical copy. User can copy start and end time.
55 ：Align to top. The start time is fixed to 0 a’clock. And can not change start/end date and interval time. ：Align to buttom. The end time is fixed to 23:59. And can not change start/end date and interval time. Replace the schedule Step 1: Select a published playlist, click : Step 2: Click to select another playlist:
56 Spots The priority of the spots is higher than scheduled playlist. At the same time, player will playback spot instead of schedule playlist. Step 1：Click the label “spots”; Step 2：Move the pointer to the calendar region. Press the right-button and drag the mouse, the following dialog box will pop up. Choose playlist and schedule. Step 3：Click the button to publish the project. The color in the project block will be changed from orange to blue.
57 Default playlist The default program can be played in any idle period to avoid the status that player hasn’t program to playback. And users need not define playlist’s schedule and loop mode of the default program. Step 1：Click to open the default program page. Step 2：Switch to , click Settings and select a playlist. Publish Off-line Playlist When player is off-line, users can download a playlist to USB disk and plug-in the player to playback. Step 1：At schedule page, click , then all the scheduled playlists will be downloaded to downloads
58 folder at local machine as the zip package. Such as C:\Documents and Settings\[user name]\My Documents\Downloads\mgv_offsch_default.zip. Step 2：Copy the zip package to the root directory of a USB disk. Step 3：Plug-in the sub disk to player. Player will load the zip package and auto playback according to the schedule. Playlist Download Status Click to check the download processing of each playlist. The table does not include urgent cases and preload playlists. If the playlist’s status is “preparing”, it can not be deleted.
59 How to create a player group Step 1：Click the button, the following dialog box will pop up. Note: 1. There is a default group named android default group. 2. Once the player is successfully configured, it will be automatically added into the default group. Create videowall group(Mainstreams)
60 If users want to combine the players as a videowall, please refer to (Mainstreams) Combine VideWall Click to revert to normal group. Create Synchronized Group This function implements sync-playing of multi players. Select a player group, click . Note： 1. Videowall group can not set to synchronized group. Player/Player Group remote power management Choose the players or player groups to set remote power management. ：Remote reboot; ：Remote shutdown; ：WOL. Player groups power on/off on schedule Step 1：Choose a player group: Step 2：Click , and set the boot/off time: Step 3：Edit power on/off time.
61 Volume Setting for Player Group Step 1：Select a player group; Step 2：Click :
62 Player Groups’ Advanced Properties You can set more properties of group: screen rotation, time zone, ntp server and mini free space of player. Schedule update time: You can set the time of updating schedule in daily, e.g. Update schedule in 2:00 am in every day. Click to save. Player Basic Properties User can modify player basic properties such as name, description and owner. Click to save. Screenshot Step 1：Choose the player: Step 2：Click label at right column, then click to snapshot:
63 Screen Status Step 1：Choose the player: Step 2：Click label at right column, then click to snapshot:
64 You can get/set screen brightness, contrast, color saturation and temperature, you can power on/off screen and disable/enable infra-red control. For color temperature, you can set customized value:
65 Check Hardware Status Users can check the usage of player’s CPU, memory and Hard Disk. Check Software Status Users can check player’s client version, player version and OS version. If there is a new version of player software, users can upgrade it by pressing update button.
66 Check Advanced Properties Player’s advanced properties include: • Mac address; • Gateway; • Mask; • Command Server IP; • Media Server IP. System Setting It sets log query type: Update Players Step 1：Click the button to open the window of system management. Step 2：Click the button to upload the software package. Step 3：Select the players at Player Management Page to upgrade.
67 Log The log includes player log and operation log. Play log: Click to enter log page. Choose the dedicate media file. Choose player group. Select start/end date and time. Click to check the search result.
68 Click to export the results to the excel table. Operation log: Select user, start/end date and time, click to check the result. Urgent Case When there is an urgent need to broadcast in time, user can use the function of emergency information. Once publishing, it will playback immediately. Step 1：Click enter the urgent case publish page.
69 Step 2：Choose a playlist from the table or click to open playlist table to add. Step 3：Choose an urgent case, click to publish. Choose a player group or groups and click ok. ：Stop to playback urgent case. ：Delete urgent case from table. User can not delete the case which is playbacking.
70 BIOS Setup Introduction The BIOS (Basic Input/Output System) installed in the ROM of your computer system supports Intel® processors. The BIOS provides critical low-level support for standard devices such as disk drives, serial ports and parallel ports. It also provides password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. BIOS Setup The BIOS provides a Setup utility program for specifying the system configurations and settings. The BIOS ROM of the system stores the Setup utility. When you turn on the computer, the BIOS is immediately activated. Press the <Del> key immediately allows you to enter the Setuputility. BIOS default password：DS@HKAA Warning: It is strongly recommended that you avoid making any changes to the defaults.
71 Main Settings BIOS Setting Description System Date Sets the date. Use the <Tab> key to switch between the data elements. System Time Set the time. Use the <Tab> key to switch between the data elements.
72 Advanced Settings This section allows you to configure, improve your system and allows you to set up some system features according to your preference.
73 ACPI Computing BIOS Setting Description Enable Hibernation Enables / Disables the system ability to hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Selects an ACPI sleep state (Suspend Disabled or S3) where the system will enter when the Suspend button is pressed.
74 LFP (eDP) to LVDS Configuration BIOS Setting Description LVDS Support Enables / Disables eDP to LVDS. Panel Color Depth Selects a panel color depth as 18 or 24 (VESA or JEIDA) bit. LVDS Channel Type Sets the LVDS channel type as single or dual channel. Panel Type Selects a resolution that fits your panel. Options: 800 x 600 / 1024 x 768 / 1280 x 1024 / 1366 x 768 / 1440 x 900 / 1600 x 900 / 1920 x 1080 LVDS Backlight Level Control Selects from Level 1 to Level 8 for the LVDS backlight.
75 EFP (DP) to LVDS Configuration BIOS Setting Description LVDS Support Enables / Disables DP to LVDS. Panel Color Depth Selects a panel color depth as 18 or 24 (VESA or JEIDA) bit. LVDS Channel Type Sets the LVDS channel type as single or dual channel. Panel Type Selects a resolution that fits your panel. Options: 800 x 600 / 1024 x 768 / 1280 x 1024 / 1366 x 768 / 1440 x 900 / 1600 x 900 / 1920 x 1080 LVDS Backlight Level Control Selects from Level 1 to Level 8 for the LVDS backlight.
76 Fintek Super IO Configuration BIOS Setting Description Standby Power on S5 (ERP) Enable the item to provide the standby power for devices. Disable the item to shut down the standby power. Options: All Enable / Enable Ethernet for WOL / All Disable Serial Ports Configuration Sets parameters of serial ports. Enables / Disables the serial port and select an optimal setting for the Super IO device.
77 Serial Port 1 Configuration BIOS Setting Description Serial Port Enables / Disables the serial port. Change Settings Selects an optimal settings for Super IO device. Device Mode Changes the serial port mode to: RS232 RS485 TX Low Active RS485 with Termination TX Low Active RS422 RS422 with Termination
78 Fintek Super IO Hardware Monitor BIOS Setting Description Temperatures / Voltages These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only values as monitored by the system and show the PC health status. CPU Shutdown Temperature Sets a threshold of temperature to shut down if CPU goes overheated. Options: Disabled / 70 °C / 75 °C / 80 °C / 85 °C / 90 °C / 95 °C
79 CPU Configuration BIOS Setting Description Socket 0 CPU Information Displays the socket specific CPU information. CPU Power Management Allows you to enable / disable Turbo Mode. Active Processor Cores Enables / Disables the cores in the processor package. Monitor Mwait Enables / Disables Monitor Mwait.
80 Socket 0 CPU Information CPU Power Management Configuration
81 BIOS Setting Description Turbo Mode Enables / Disables the turbo mode. AMI Graphic Output Protocol Policy BIOS Setting Description Output Select Outputs through HDMI interface.
82 Network Stack Configuration BIOS Setting Description Network Stack Enables / Disables UEFI Network Stack. IPv4 PXE Support Enables / Disables IPv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be created. IPv4 HTTP Support Enables / Disables IPv4 HTTP Boot Support. If disabled, Ipv4 HTTP boot option will not be created. IPv6 PXE Support Enables / Disables IPv6 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be created. IPv6 HTTP Support Enables / Disables IPv6 HTTP Boot Support. If disabled, Ipv4 HTTP boot option will not be created. PXE boot wait time Assigns a period of time to press ESC key to abort the PXE boot. Media detect count Assigns a number of times to check the presence of media.
83 CSM Configuration BIOS Setting Description CSM Support Enables / Disables CSM support. GateA20 Active Upon Request disables GA20 when using BIOS services. Always cannot disable GA20, but is useful when any RT code is executed above 1 MB. INT19 Trap Response Sets how BIOS reacts on INT19 trap by Option ROM. Immediate executes the trap right away. Postponed executes the trap during legacy boot. Boot option filter Controls the priority of Legacy and UEFI ROMs. Network Controls the execution of UEFI and Legacy PXE 0pROM. Storage Controls the execution of UEFI and Legacy Storage OpROM. Video Controls the execution of UEFI and Legacy Video OpROM. Other PCI devices Determines OpROM execution policy for devices other than network, storage or video.
84 USB Configuration BIOS Setting Description Legacy USB Support Enabled enables Legacy USB support. Auto disables legacy support if there is no USB device connected. Disabled keeps USB devices available only for EFI applications. XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver. USB Mass Storage Driver Support Enables / Disables the support for USB mass storage driver. USB Transfer time-out The time-out value (1 / 5 10 / 20 secs) for Control, Bulk, and Interrupt transfers. Device reset time-out Gives seconds (10 / 20 / 30 / 40 secs) to delay execution of Start Unit command to USB mass storage device. Device power-up delay The maximum time the device will take before it properly reports itself to the Host Controller. Auto uses default value for a Root port it is 100ms. But for a Hub port, the delay is taken from Hub descriptor.
85 Chipset Settings North Bridge BIOS Setting Description Max TOLUD Sets a maximum value of TOLUD.
86 South Cluster Configuration HD Audio Configuration BIOS Setting Description HD-Audio Support Enables / Disables HD-Audio support.
87 PCI Express Configuration BIOS Setting Description PCI Express Root Port 1 ~ 6 Accesses the control of the PCI Express Root Port.
88 BIOS Setting Description PCI Express Root Port Enables/ Disables the PCIe root port. Auto allows you to disable unused root port automatically for the most optimum power savings. ASPM Sets the PCIe active state power management. Options: Disable / L0s / L1 / L0SL1 / Auto L1 Substates Sets PCIe L1 substates. Options: Disables / L1.1 / L1.2 / L1.1 & L1.2 PME SCI Enables / Disables PME SCI. PCIe Speed Configures the PCIe speed. Options: Auto, Gen1, Gen2 SATA Drivers BIOS Setting Description Chipset SATA Enables / Disables the Chipset SATA Controller. The Chipset SATA Controller supports the 2 black internal SATA ports (up to 3Gb/s supported per port). SATA Mode Selection Determines how SATA controller(s) operate.
89 USB Configuration BIOS Setting Description XHCI Pre-Boot Driver Enables / Disables the support for XHCI Pre-Boot Driver. XHCI Mode Enables / Disables XHCI mode. If disabled, XHCI controller would be disabled, and none of the USB devices are detectable or usable when systen is booted up in OS. Do NOT disable it unless for debug purpose. USB VBUS VBUS should be ON in HOST mode. It should be OFF in OTG device mode. USB HSIC1 Support Enables / Disables USB HSIC1. USB SSIC1 Support Enables / Disables USB SSIC1. USB Port Disable Override Selectively enables / disables the corresponding USB port from reporting a device connection to the controller. XDCI Support Enables / Disables XDCI. XHCI Disable Compliance Mode FALSE makes the XHCI Link Compliance Mode not disabled. TRUE disables the XHCI Link Compliance Mode.
90 Security Settings BIOS Setting Description Setup Administrator Password Sets an administrator password for the setup utility. User Password Sets a user password.
91 Boot Settings BIOS Setting Description Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting. Bootup NumLock State Selects the keyboard NumLock state. Quiet Boot Enables / Disables Quiet Boot option. New Boot Option Policy Controls the placement of newly detected UEFI boot options. Options: Default, Place First, Place Last Boot mode select Selects a Boot mode, Legacy / UEFI / Dual. Boot Option Priorities Sets the system boot order priorities for hard disk, CD/DVD, USB, Network.
92 Save & Exit Settings BIOS Setting Description Save Changes and Exit Exits system setup after saving the changes. Discard Changes and Exit Exits system setup without saving any changes. Save Changes and Reset Resets the system after saving the changes. Discard Changes and Reset Resets system setup without saving any changes. Save Changes Saves changes done so far to any of the setup options. Discard Changes Discards changes done so far to any of the setup options. Restore Defaults Restores / Loads defaults values for all the setup options. Save as User Defaults Saves the changes done so far as User Defaults. Restore User Defaults Restores the user defaults to all the setup options.

Navigation menu