VALEO Telematik und Akustik ATM2-T-13 ATM-02-ROW-T1 User Manual

Peiker acustic GmbH ATM-02-ROW-T1 Users Manual

Users Manual

peiker acustic GmbH, Max-Planck-Straße 28-32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRB 14055 phG: Valeo Peiker Telematik GmbH, Vorsitzender der Geschäftsführung: Fatma Montacer, Geschäftsführer: Markus Skiba, Amtsgericht Coburg HRB 5735 Vorsitzender des Aufsichtsrates: Marc Vrecko Ein Unternehmen der Valeo Firmengruppe Statement for User Manual Advanced Telecommunication Module (ATM-02) Roof & Trunk Version Rev. 1.3 Release peiker acustic confidential and proprietary Name of model: ATM-02 roof variant / ATM-02 trunk variant Status: Release Revision: 1.3 Date: 13.02.2018
________________________________________________________________________________________________________________________________ Page 2 VALEO – Product Line Valeo peiker Telematics - www.valeo.de Table of Contents 1. Change Dokumentation ..................................................................................................................... 3 2. Introduction ....................................................................................................................................... 4 2.1. Scope ......................................................................................................................................... 4 2.1.1. Purpose of the document .................................................................................................... 4 2.1.2. General Information ............................................................................................................. 4 2.1.3. Contact Information ............................................................................................................. 4 3. Description of the product .................................................................................................................. 5 3.1 Use Cases of the product ........................................................................................................... 5 3.2 Roof and Trunk version of ATM-02 ............................................................................................. 6 3.3 Photos ........................................................................................................................................ 7 3.4 Dimensions ................................................................................................................................ 9 3.5 Product variants ....................................................................................................................... 10 4. Hardware ......................................................................................................................................... 11 4.1 Features ................................................................................................................................... 11 4.2 Environmental conditions ......................................................................................................... 12 4.3 Frequency bands...................................................................................................................... 13 4.3.1 ATM-02-ECE-R1 and ATM-02-ECE-T1 ............................................................................. 13 4.3.2 ATM-02-US-R1 and ATM-02-US-T1 .................................................................................. 14 4.3.3 ATM-02-CHN-R1 and ATM-02-CHN-T1 ............................................................................ 14 4.3.4 ATM-02-MEX-R1 and ATM-02-MEX-T1 ............................................................................ 15 4.3.5 ATM-02-ROW-R1 and ATM-02-ROW-T1 .......................................................................... 16 5. Warning Statements for the User Manual ........................................................................................ 17 5.1 Europe ..................................................................................................................................... 17 5.2 US /Canada .............................................................................................................................. 17 5.3 Modifications ............................................................................................................................ 17 5.4 RF Exposure Statement (MPE) ................................................................................................ 17 5.5 Brazil ........................................................................................................................................ 18 5.6 Taiwan ..................................................................................................................................... 18 5.7 Mexico ...................................................................................................................................... 19 5.8 Japan ....................................................................................................................................... 19 5.9 China........................................................................................................................................ 19 5.10 Korea ....................................................................................................................................... 19 6. Battery replacement ........................................................................................................................ 20
________________________________________________________________________________________________________________________________ Page 3 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 1. Change Dokumentation Date Revision Name Changes /Comment 08.12.2017 1.0 Roman Leimenstol Initial Version 31.01.2018 1.1 Roman Leimenstol Updated version on all variants 08.02.1018 1.2 Roman Leimenstol Add frequency bands 13.02.2018 1.3 Roman Leimenstol Add frequency bands for each variant Notice The information in this document has been carefully reviewed and is believed to be accurate. Nevertheless, this document is subject to change without notice, and peiker acustic assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update the contained information, or to notify a person or organization of any updates. Peiker acustic reserves the right to make changes to the product, at any time, in order to improve reliability, function or design. Peiker acustic does not represent that products described herein are free from patent infringement or from any other third party right. No part of this document may be reproduced, adapted or transmitted in any form or by any means for any purpose, except as explicitly allowed in a written agreement signed by peiker acustic. Peiker acustic or its affiliates may have patents or pending patent applications, trademarks, copyrights or other intellectual property rights that apply to the ideas, material and information expressed herein. Confidential. All rights reserved. This document is peiker acustic GmbH restricted document. According to the Standards of Business Conduct, this document may not be shared outside peiker acustic GmbH. This document may be shared with the customer, if appropriate agreement for professional services exists.
________________________________________________________________________________________________________________________________ Page 4 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 2. Introduction 2.1. Scope 2.1.1. Purpose of the document The Advanced Telecommunication Module (ATM-02) roof and trunk variant is manufactured by peiker acustic GmbH (grantee) and sold as an OEM product. According to the US Code of Federal Regulations (47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc.), the grantee must ensure the end-user has the applicable and appropriate operating instructions for the device. In the case of this product the grantee must notify the OEM to notify the end-user. Peiker acustic GmbH will supply this document to the reseller or distributor to inform him what must be included in the end user’s manual for the commercial product and which installations guidelines for the antenna are applicable. 2.1.2. General Information The ATM-02 is assembled in the car during production. There are no other distribution channels than assembly in the cars production line or spare part replacement within car service. Please be advised that this product will need special trained professionals in configuring and installing the product. The product will be distributed through controlled distribution channel which has special trained professionals to install this product and will not be sold directly to the general public through retail stores. The ATM02 trunk variant is mounted invisible to the driver in the car behind the trunk cover panels. There are no direct interfaces to the driver or passengers. The ATM-02 is connected to the cars internal bus and control systems. The ATM-02 uses the external antenna of the car for cellular communications. 2.1.3. Contact Information peiker acustic GmbH Max-Planck-Straße 28-32 D-61381 Friedrichsdorf Germany http://www.valeo.com
________________________________________________________________________________________________________________________________ Page 5 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 3. Description of the product The Advanced Telecommunication Module 2 (ATM-02) is designed and produced by peiker acustic exclusively for OEM. The ATM-02 is assembled in the car during production. There are no other distribution channels than assembly in the cars production line or spare part replacement within car service. The ATM-02 is mounted invisible to the driver in the car under the roof plane or in the trunk area. In the roof version, the antenna is directly connected to the ATM-02. The trunk version is connected by wire to the antennas. The only direct interface of the ATM to the driver or passenger is a dedicated push button and LED (i.e. Mayday LED) to trigger an emergency call and signal the call status. Except this button and the LED, there are no direct interfaces of the ATM to the driver or passengers. The ATM-02 is connected to the internal bus and control systems of the car. The ATM-02 uses the external antenna of the car and contains an internal backup antenna. The ATM-02 uses a factory mounted embedded SIM card (MFF2). 3.1 Use Cases of the product The Advanced Telecommunication Module 2 is designed as the car’s interface to the outer world in form of data and voice communication. Typical use cases are as follows:  Exchange of diagnostic data between the vehicle and the OEM server and OEM backend.  Voice connection between vehicle and public safety answering point or vehicle and OEM call centers  Interface to networks for data exchange to support infotainment and comfort functions.  Network access service for data exchange e.g. supporting OEM-specific assist services and other online services like weather, maps, emails for in car use.  Contains a GNSS receiver supporting GPS, GLONASS and Galileo satellite navigation systems for position determination to be used with further services The ATM-02 is connected to the vehicle internal bus (CAN-Bus) and network interface (OABR). It is automatically powered up if it receives a special signal via the car bus (CAN-Bus), e.g. when the car is in drive mode. The ATM-02 is also powered up with an out of band signaling from the cellular network, e.g. via a receiving SMS from the OEM service center (wake up message). The concierge calls (i.e. service calls) are performed via the multimedia audio interface of the vehicle and the head unit (HU) provides the user interface for this type of call. The audio signal is transmitted digitally via VoIP. In case of an emergency OEM Assist call the ATM-02 is able to perform an autonomous mobile originated call using the microphone and the loudspeaker connected directly to the device. The voice call itself is fully handled by the ATM-02. This call is originated automatically e.g. in case of a crash triggered by the Airbag ECU or manually with a service button in the control panel of the vehicle. In this case the head unit of the car is not involved in the connection.
________________________________________________________________________________________________________________________________ Page 6 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 3.2 Roof and Trunk version of ATM-02 For ATM-02 there are two assembly situations in the vehicle. Therefore, two versions of the ATM-02 are used: the roof version and the trunk version. The roof version is direct mounted with the roof antenna and has a direct connector with it. Also a internal backup antenna is included in the roof version of ATM-02. RF signals, which are not use from ATM-02 as DAB or SDARS, go through the ATM-02 to an external connector. Telephone antennas are connected via a splitter to provide the signal also to the vehicle. The trunk version is installed in the trunk. In each case spatially separated from the antennas. The main antennas and the backup antenna are external. The trunk version of the ATM-02 does not contain an internal backup antenna. Figure 1: drawing - ATM-02 trunk version (orange) mounting example Both variants are equipped with the same PCB board based on the same master circuit diagram. The 10-pole and 20-pole connectors to the vehicle infrastructure are identical. Both versions are using identical materials for the housing and are equipped with the same backup battery type and battery protection circuits. The internal backup antenna is only assembled in the ATM-02 roof variant.
________________________________________________________________________________________________________________________________ Page 7 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 3.3 Photos ATM-02 roof version ATM-02 trunk version Roof VersionTop view Trunk version Top view Roof version Left side view (not US) Trunk version Left side view Roof version Right side view Trunk version Right side view
________________________________________________________________________________________________________________________________ Page 8 VALEO – Product Line Valeo peiker Telematics - www.valeo.de Photo - Roof version Bottom view Photo - Trunk version Bottom view Roof version Internal backup battery Trunk version Internal backup battery Roof version Side view with mounted antenna Trunk version View with connected antennas
________________________________________________________________________________________________________________________________ Page 9 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 3.4 Dimensions length width height weight ATM-02-[XXX]-R1 160mm 112mm 18mm 286g ATM-02-[XXX]-T1 217mm 100mm 22,9mm 235g Figure 2: ATM-02 Roof Isometric View Front View Figure 3: ATM-02 Roof Isometric View Back View Figure 4: ATM-02 Trunk Isometric View Back View Figure 5: ATM-02 Trunk Isometric View Back View
________________________________________________________________________________________________________________________________ Page 10 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 3.5 Product variants The ATM-02 is available in country specific variants. The variants supporting different cellular radio access technologies in different frequency bands. All variants are equipped with a GPS, GLONASS and Galileo GNSS receiver. The naming convention (model ID) of the specific variant is ATM-02-[XXX]-[Y]1. Example: the European variant of the roof version has the model ID ATM-02-ECE-R1. Table 1: Model id country variants [XXX] Country / Area ECE Europe, Russia, India, Kuwait, Malaysia, Taiwan, South Korea, Singapore CHN China, Macau, Hong Kong US USA, Canada, Puerto Rico RoW Japan, Australia, New Zealand, South African Area, Brazil MEX Mexico Table 2: model id roof/trunk version tag [Y] Version / Mounting location in vehicle R Antenna is directly mounted on top of the ATM device (Roof Version) The device is mounted directly at the roof of the vehicle. T Antenna cables are connected to the RF-connectors (Trunk Version) The device is mounted in the trunk area of the vehicle. The implemented module, the attached antenna as well as the embedded SIM card are depending on the country specific variant. Not all variants are listed in the tables above.
________________________________________________________________________________________________________________________________ Page 11 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 4. Hardware 4.1 Features Following Technologies and wireless protocols are implemented: Name Short description GSM/GPRS/EDGE Rel. 9 Multi slot class 33 WCDMA/HSPA+ Rel. 9 up to HSDPA CAT 24 (42,2 Mbit/s) depending on variant HSUPA CAT 6 (5.76 Mbit/s) LTE Rel. 11 LTE-FDD and LTE-TDD, DL Cat 11 GNSS GPS, Galileo, Glonass, BeiDou, SBAS, QZSS RAT Max transmitter power Modulation (TX) GSM850, 900 Class 4 (2W) GMSK GSM1800, 1900 Class 1 (1W) GMSK EDGE850, EDGE900 Class E2 (0.5W) 8-PSK EDGE1800, EDGE1900 Class E2 (0.4W) 8-PSK WCDMA Rel.99, HSPA+ Class 3 (0.25W) QPSK, 16-QAM, 64-QAM, BPSK LTE Class 3 (0.25W) QPSK, 16-QAM, 64-QAM,
________________________________________________________________________________________________________________________________ Page 12 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 4.2 Environmental conditions Temperature range name Range values Comment Operating temperature range -40°C … +90°C Performance may slightly deviate from 3GPP specifications Operating temperature range (3GPP conform) -20°C … +65°C conform to 3GPP specifications Storage temperature range -40°C … +85°C Name Value Operating relative humidity 5% – 93% non-condensing Norm Value International Protection Marking according to ISO 20653 IP40
________________________________________________________________________________________________________________________________ Page 13 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 4.3 Frequency bands 4.3.1 ATM-02-ECE-R1 and ATM-02-ECE-T1 Supported frequency bands Frequencies / MHz GSM 900 UMTS VIII LTE 8 880 - 915 GSM 1800 LTE 3 1710 - 1785 UMTS I LTE 1 1920 - 1980 UMTS III 1747,5 - 1785 LTE 7 2500 - 2570 LTE 20 824 - 862 LTE 28A 703 – 718 LTE 32 1452 - 1496 LTE 38 2570 - 2620
________________________________________________________________________________________________________________________________ Page 14 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 4.3.2 ATM-02-US-R1 and ATM-02-US-T1 Supported frequency bands Frequencies / MHz GSM 850 UMTS V, LTE 5 824 - 862 LTE 4 1710 - 1785 GSM 1900 UMTS II LTE 2 1850 - 1910 UMTS IV 1732,5 – 1755 LTE 12 699 – 716 LTE 7 2500 - 2570 LTE 29 717 - 729 4.3.3 ATM-02-CHN-R1 and ATM-02-CHN-T1 Supported frequency bands Frequencies / MHz GSM 900 UMTS VIII 880 - 915 GSM 1800 LTE 3 1710 - 1785 UMTS I LTE 1 1920 - 1980 LTE 7 2500 - 2570 LTE 38 2570 - 2620 LTE 40 2300 – 2400 LTE 41 2496 - 2690
________________________________________________________________________________________________________________________________ Page 15 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 4.3.4 ATM-02-MEX-R1 and ATM-02-MEX-T1 Supported frequency bands Frequencies / MHz GSM 850 UMTS V, LTE 5 824 - 862 LTE 8 880 - 915 LTE 4 1710 - 1785 GSM 1900 UMTS II LTE 2 1850 - 1910 UMTS IV 1732,5 – 1755 LTE 12 699 – 716 LTE 7 2500 - 2570 LTE 29 717 - 729
________________________________________________________________________________________________________________________________ Page 16 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 4.3.5 ATM-02-ROW-R1 and ATM-02-ROW-T1 Supported frequency bands Frequencies / MHz GSM 850 UMTS V, UMTS VI LTE 5, LTE 19 824 - 862 GSM 900 UMTS VIII LTE 8 880 - 915 GSM 1800 LTE 3 1710 - 1785 GSM 1900 UMTS II 1850 - 1910 UMTS I LTE 1 1920 - 1980 UMTS III 1747,5 - 1785 UMTS XIX 1750 – 1784,8 LTE 7 2500 - 2570 LTE 9 1749,9 – 1784,9 LTE 21 1447,9 – 1462,9 LTE 28B 718 – 748 LTE 40 2300 – 2400
________________________________________________________________________________________________________________________________ Page 17 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 5. Warning Statements for the User Manual The following certification markings and hints should be printed in the end user’s manual: 5.1 Europe This device must be supplied by a limited power source according to EN 62368-1. The clearance and protected creepage distances required by the final product must be withheld when the module is installed. The cooling of the final product shall not negatively be influenced by the installation of the module. 5.2 US /Canada This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 5.3 Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by peiker acustic GmbH could void the user's authority to operate the equipment. Note: The provisions of CFR § 15.105 (Information to the user) paragraphs (a) and (b) do not apply to this device. It is exempted from the technical standards under the provisions of § 15.103(a). 5.4 RF Exposure Statement (MPE) The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is always maintained between the radiator (antenna) and the human body. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
________________________________________________________________________________________________________________________________ Page 18 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 5.5 Brazil Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. 5.6 Taiwan 低功率警語 Low Power device warning 依據低功率電波輻射性電機管理辦法 第十二條 ※經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 ※低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 -前項合法通信，指依電信法規定作業之無線電通信。 -低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 (Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. Article 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.) - 減少電磁波影響，請妥適使用 (For Reducing RF Influence, Use Properly) - 為維護隱私權，請妥適使用 (For protect individual privacy, Use Properly) - 輸入電源端之功率不得超過250VA (Input power cannot exceed 250VA) - 輸入電源需使用附的保險絲於產品前端做保護 (The accessory fuse must be used for input power to make protection at the front end)
________________________________________________________________________________________________________________________________ Page 19 VALEO – Product Line Valeo peiker Telematics - www.valeo.de - 本器材須經專業工程人員安裝及設定，始得設置使用，且不得直接販售給一般消費者。 (This device must be installed by expert and will not be sold directly to the general public through retail store) 5.7 Mexico La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. 5.8 Japan This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese Telecommunications Business Law (電気通信事業法) This device should not be modified; otherwise the granted designation number will become invalid. 5.9 China Class A product's warning: 警告使用者： 此为A级产品，在生活环境中， 该产品会造成无线干扰。在这种情况下，可能需要用户对其干扰采取切实可行的措施 5.10 Korea “본 기기는 인체로부터 20cm 이상 이격하여 사용하는 것을 권장합니다.” ("This unit is recommended to use at least 20cm apart from the human body.")
________________________________________________________________________________________________________________________________ Page 20 VALEO – Product Line Valeo peiker Telematics - www.valeo.de 6. Battery replacement Open the battery compartment located on the lower right corner of the device. Remove the battery and replace it with a new one of the same type (BMW 6833994-02). Close the battery compartment by pushing the lid towards the housing until it is locked.

Navigation menu