VALEO Telematik und Akustik 2609-037-00X CAN controlled GSM phone / HA88 User Manual IM v10

Peiker acustic GmbH & Co. KG CAN controlled GSM phone / HA88 IM v10

Manual

DOCUMENT NAME ISSUE DATE PAGE IM-TPU/HA88 1.0 2004-11-01 1 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written IM 1 authorisation it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. Installation Manual TPU_WISMOQ24X6A-10C / HA88 CAN Controlled GSM Telephone Unit with handset HA88 MODIFICATION NATURE OF ALTERATION DATE SIGNATURE Released Specification 2004-11-01 RI
DOCUMENT NAME ISSUE DATE PAGE IM-TPU/HA88 1.0 2004-11-01 2 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written IM 2 authorisation it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. Notice: This TPU (telephone unit) device contains 900/1800 MHz GSM (Q2406 version) or 850/1900MHz PCS (Q2426 version) functions, the Q2406 version is not operational in U.S. Territories. This filing is only applicable for 850/1900 MHz PCS operations. The TPU generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. To ensure that the TPU complies with current FCC regulations and safety requirements limiting both maximum RF output power and human exposure to radio frequency radiation, use an antenna with a maximum gain of 2dBi and a separation distance of at least 20 cm must be maintained between the unit's antenna and the body of the user and any nearby persons at all times and in all applications and uses. Caution: (pertaining to FCC part 15.21) Modifications not expressly approved by this company could void the user's authority to operate the equipment
DOCUMENT NAME ISSUE DATE PAGE IM-TPU/HA88 1.0 2004-11-01 3 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written IM 3 authorisation it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. The GSM-box (TPU-WismoQ24X6A) is connected: - directly to the GSM antenna via a HIROSE connector, the length of the coax cable is 3m - directly to the handset HA88 via western plug (the TPU supplies the Handset) - the SIM card reader is placed in the command unit - the TPU will be supplied via an AMP connector, this connector interfaces also the CAN bus system and to a microphone ( via connector 11) - the loudspeakers are connected to a sound module and interfaces to the TPU via the command unit.
DOCUMENT NAME ISSUE DATE PAGE IM-TPU/HA88 1.0 2004-11-01 4 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written IM 4 authorisation it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. Antenna Specification Connector: HIROSE Coax Cable: 3m ELECTRICAL CHARACTERISTICS Frequency AMPS: 824 - 894 ETACS-GSM: 870 - 960 MHz DCS: 1710 - 1880 MHz PCS: 1850 – 1990 MHz Nominal Impedance 50 Ω VSWR AMPS (824 - 894 MHz) < 2 VSWR GSM (880 - 915 MHz) < 1,6 VSWR GSM (930 - 960 MHz) < 2 VSWR DCS (1710 - 1880 MHz) < 2 VSWR PCS (1850 - 1990 MHz) < 2 Power Handling 10 W Peak Gain (in relation to λ/4) 0 ± 2 dB
DOCUMENT NAME ISSUE DATE PAGE IM-TPU/HA88 1.0 2004-11-01 5 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written IM 5 authorisation it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. RADIATION PATTERN: AMPS and GSM Frequencies DCS and PCS frequencies Polarization:VerticalTest Departmentantenna:RTZlocation:Roof-Centermodel:Alfa 164date:(*)The "0 dBi" level is the level received by the reference antenna (lambda/4)placed on the roof in the same position of tyhe AUTAvg:dBi(*)dB Average Gain-0,3014/01/02-20,00-15,00-10,00-5,000,005,00824 844 864 884 904 924 944 MHz-40-30-20-10010 0180Polarization:VerticalTest Departmentantenna:RTZlocation:Roof-centermodel:Alfa 164date:(*)The "0 dBi" level is the level received by the reference antenna (lambda/4)placed on the roof in the same position of tyhe AUTAvg:dBi(*)dB Average Gain14/01/02-1,49-20,00-15,00-10,00-5,000,005,001710 1760 1810 1860 1910 1960 MHz-40-30-20-10010 0180

Navigation menu