Universal Scientific UB22111S Bluetooth Module User Manual UB2 2111 S

Universal Scientific Industrial Co., Ltd. Bluetooth Module UB2 2111 S

Contents

Manual

Page 1 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveTrademark InformationBTW is a product of Widcomm Inc.Windows, Windows 98, Windows NT, Windows Millennium, Windows XP are trademarks of MicrosoftCorporation. Internet Explorer is a product of Microsoft Corporation.The BLUETOOTH trademarks are owned by Bluetooth SIG and used by USI under license.T39 handset is a product of Ericsson.All other trade names mentioned in this document or the other documentation provided with thisproduct are trademarkes or registered trademarks of their respective holders.
Page 2 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveTable of ContentsItem PageHardware Specification 3Connector Pin outs 4Mounting Guide for Antenna Radiation 5Impedance Matching of Antenna 6System Requirement 7Bluetooth Software Install step by Step 8-14Start Connection Over The Bluetooth Airwaves – File Transfer 15 - 18Connecting Over The Bluetooth Airwaves – Security 19 - 20Start Connection Over The Bluetooth Airwaves – Dial Up Networking Profile 21 -23Technical Support 24
Page 3 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveHardware Specificationl Conducted Power: 0.8mWl Frequency Range: 2.402GHz~2.4835GHzl Modulation: GFSKl Sensitivity: -80 dbml Data Rate:Asynchronous:723.2kbps/57.6kbpsSynchronous:433.9kbps/433.9kbpsl Operating Voltage:+3.3VDl Operating systems: Windows 98SE Windows ME Windows 2000 Windows XPl Antenna Peak Gain @ 2.45GHz: 0.5dBil DimesionLength: 36.00 mm Width: 13.80 mm Height: 3.8 mm
Page 4 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveConnector pinoutsType-APIN # Type-BPIN # Module Pin Name Usage forPlatforms Description1 2 GND GND Ground.2 4 USB_D+ USB_D+ USB Data +. Must be routed with USB_D- as a90Ω differential pair.3 6 USB_D- USB_D- USB Data –. Must be routed with USB_D+ as a90Ω differential pair.4 8 USB_PWR USB_PWRThis is a 5V rail that is used by bus-powered USBdevices. The module does not actually drawpower from this pin, uses this pin to detectwhether the USB host port is powered so as toavoid latch-up conditions.5 10 RSVD Test Point, COEX1 Reserved. This pin may be used for resolvingcoexistence with the 802.11 radio(s) on the MPCIcard in the platform.6 1 HW_RADIO_DIS# HW_RADIO_DIS# Active low input from the platform to the card todisable all the radios on the module fromtransmitting.7 7 RSVD Test Point, COEX2 Reserved. This pin may be used for resolvingcoexistence with the 802.11 radio(s) on the MPCIcard in the platform. .8 5 +3.3V +3V_SUS This is the rail from which the module powersitself (as a self-powered USB device).9 3 LED_BT_RadioState BT_RADIO_ON Active-high LED drive signal for indicating thestate of the Bluetooth Radio. This LED shouldnot have a flashing feature.10 9 GND NC
Page 5 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveMounting Guide for Antenna RadiationIn order to achieve longest communication range, please keep the area surrounding antenna free of grounding or metalhousing.UB2-2111-S AntennaGround should not come in this areaGroundDo not completely coverthe antenna portion withground plates.GroundCovering only one side ofthe antenna is acceptable.But the distance betweenground plate and antennashould be keep as far aspossible.Ground
Page 6 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveImpedance Matching of AntennaUB2-2111-S utilizes a monopole printed antenna for radiate communication. Application environments,such as notebooks, PDAs, printers or other handheld devices, both have plastic housings, differentmotherboards and other mechanism structures. These factors will cause the deviation of antennacentral frequency. Therefore, impedance matching of antenna should be optimized for variousapplications to achieve longest communication range. Please consult USI for further information.
Page 7 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveSystem RequirementsBTW runs under:- Windows 98 (Second edition)- Millennium (Windows 98 ME)- Windows 2000- Windows XPDuring the installation, you need a CD-ROM driver for access to the bundle software.
Page 8 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveBluetooth Software Install step by stepStep 1 Insert the Widcomm BTW CD into the PC’s CDROM drive. Installation proceeds automatically. Since Windows NT does not support USB, the installation of the CD should be done on systems with Windows ’98 or Windows 2000.Step 2 An InstallShield box appears to inform you the installation Wizard is being set up. Please wait.Figure 2. Welcome WindowNote: These images were captured from a Windows 2000 system. Your images may look slightly different.Step 3 A Welcome To The Installation Wizard window appears as shown in Figure 2. Select Next to continue the installation process.
Page 9 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 3. License Agreement WindowStep 4 The license agreement window appears as shown in Figure 3. If you accept, mark the “I accept the terms in the license agreement” option and click on Next. The installation will proceed. If you do not accept the conditions of the agreement, the installation process will terminate.Figure 4. Device Information WindowStep 5 A Device Information window opens as shown in Figure 4. Enter a device name and choose a device type. These options will not affect the functionality. The device information is used to inform the master device what kinds of other devices are within range to connect to so the user can identify which device is the one they need to connect to if there is more than one device within range. Select the Next Button.
Page 10 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 5. Destination Folder WindowStep 6 A Destination Folder window appears as shown in Figure 5, which states the default location and gives you the opportunity to choose an alternative folder. When the location is acceptable, select Next.Figure 6. Ready to Install WindowStep 7 A Ready to Install Program window appears as shown in Figure 6. Select Install when you are ready to proceed.
Page 11 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 7. Installing WindowStep 8 An Installing Widcomm Status window appears. Please be patient, this may take up to 5 minutes.Step 9 A notification window appears asking you to restart your system. Select Yes to proceed.Figure 8. Install Complete WindowStep 10 You will be informed when the installation is completed. Select Finish. Follow the instructions thereafter. You may be asked to restart the computer after the installation completes. In that case click OK and restart the computer.
Page 12 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveStep 11 A Bluetooth Neighborhood logo has appeared on your desktop and a small Bluetooth icon has appeared on your icon tray (lower right-hand side of the screen).Figure 9. Device Manager WindowStep 12 And you can check it in the My computer - > Device Manager. You may now remove the Widcomm CD from your CD drive.
Page 13 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveStep 13 Let’s configure your devices. On your icon tray (lower right-hand side of the screen), right click on the small Bluetooth Neighborhood icon on your icon tray.Figure 10. Bluetooth Configuration Window -General TabStep 14 A pull down window appears with two words, Security (which we will discuss later) and Configuration. Choose Configuration.Step 15 A Bluetooth Configuration window appears as shown in Figure 10. In this document, there are three tabs-of-interest: General, Information Exchange, and Hardware. Select the General tab.Step 16 Type in a name for your device and choose either Laptop or Desktop. The security option’s default is medium; leave that as it is for now. Select OK.
Page 14 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 11. Bluetooth Configuration Window –Information Exchange TabStep 17 Now choose the Information Exchange tab as shown in Figure 11. The My Shared Directory window allows you to determine where you would like to locate files you want to share with other devices. The default is called File Transfer. My Inbox Directory is the dialogue window that allows you to determine where you wish to put incoming files. Configure the many choices on this tab now or leave them at the default settings and then select OK.Figure 12. Bluetooth Configuration Window -Hardware TabStep 18 Now choose the Hardware tab. Once you have established a connection, you will see the BD Address and other interesting information about the device.
Page 15 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveStart Connecting Over The Bluetooth Airwaves – File TransferStep 1 Double click on the Bluetooth Neighborhood icon located on your desktop. A Bluetooth Neighborhood window appears as shown in Figure 13. Double click on the Entire Bluetooth… icon. This will perform an inquiry and search for other nearby devices.Figure 13. Bluetooth Neighborhood WindowFigure 14. Found Configured DeviceNote: Because of over-the-air interference and if you have a lot of devices in the evaluation area, then you might have to click on Search for Devices a few times .Step 2 Then, Double click on the Search For Devices icon. It will find your other bluetooth device as shown in Figure 14. If you have other Bluetooth devices in the area, they will be located and appear on your screen as Unknown. Only the devices that you have configured will have a name.Double click here
Page 16 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 15. Found Configured DeviceStep 3 On your master device, double click on the icon named after your slave device as shown in Figure 15. It will show all profile that the slave support as shown in Figure 16. Figure 15. Explore Serices windowStep 4 Double click on the icon Public Folder. It will connect to the Shared Directory of the slave device (See the step 17). And show all the files in the Share Directory.
Page 17 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 17. Explore files windowStep 5 Figure 17 show there are no files in the Share Directory.Figure 18. Windows 2000 Files ManagerStep 6 Now, you can copy files from the Files Manager master device.
Page 18 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 19. Paste files to Public FolderStep 7 Then, Paste this file into Public Folder, A Copying Window appears as shown in Figure 20.Figure 21. Copy completed windowStep 8 When the copy is completed, you will see the file name listed in the Public Folder.Figure 20. Copying…
Page 19 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveConnecting Over The Bluetooth Airwaves – SecurityStep 1 Go back to the icon tray (lower right-hand side of the screen) and right click on the small Bluetooth Neighborhood icon. Highlight Configuration on the pull down window.Step 2 The Bluetooth Configuration window opens as shown in Figure 22. Select the General tab. Under Security, choose the High option. This will enable encryption. Click OK. (If you choose the Medium option, encryption will be disabled.)Figure 22. Bluetooth Configuration Window – Encryption EnabledFigure 23. Bluetooth Security WindowStep 3 Send any file(s) in encrypted mode by repeating Step 2.Step 4 For additional security, right click on the icon tray’s small Bluetooth Neighborhood icon again. On the pull down window, highlight Security. The window shown in Figure 23 opens with two sections. All of your found devices will be on the left-hand side.
Page 20 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 24. Bluetooth Passkey RequestStep 5 Highlight a device and click on the Execute Pairing button. Now this is the only device(s) that can connect to your computer. The user is asked for a passkey. The Bluetooth Passkey Request window opens as shown in Figure 24.Step 6 Click on the OK button after entering the passkey in the Bluetooth Passkey window.Step 7 On the other device, the Bluetooth icon on the icon tray (lower right-hand side of the screen) will blink. On clicking the icon a Bluetooth passkey request window pops up requesting the user to enter passkey. Enter the same passkey as given on the first device. Click on OK button.Successfully finding the Available services on the second device will Be an indication that we are in connection using pairing. If there is any Security Error message, make sure that the passkeys given on both devices are the same.
Page 21 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveStart Connecting Over The Bluetooth Airwaves –Dial-up Networking ProfileExample 1 : Use the ERICSSON T39mc mobile ( with the Bluetooth module and GPRS service and provide Dial-up Networking Profile)Step 1 Execute the BTW program。Step 2 Before you using this application you must to pair the master device and T39mc, After pairing successfully at the first time, the PC and T39mc will recognize each other, Then, you can use the all services of the T39mc without being recognized again。Step 3 Make pair from T39mc。 T39mc setting : Figure 25 Bluetooth Passkey Request Extras5 Synchronization6 Bluetooth7 Time Bluetooth1 Discoverable2 Paired devices3 DiscoverPaired devicesAdd device Add to paired1 Phone initiates2 Phone accepts Add types1 All types2 Headset3 PC Add to pairedPasskey:xxx USI12162Add to paireddevices?Name tag :USI12162Pairing …Pairing successful Add device USI12162In this step you must enter the Passkey : xxx (for wmample: 123) on the T39mc side，and then you will see aBluetooth connection request detected message on the PC screen，click the icon and enter the samepasskey(123) into the column。Enter tag name Completed
Page 22 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 26. Found Configured DeviceStep 4 After pairing finished, click and you can see the icon .Figure 27. Explore Serices windowStep 5 Double click icon ,you can see what are the services T39mc support, click icon .
Page 23 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveFigure 28. Bluetooth Dial_up WindowStep 6 Enter the username、password and Dial_up number, then click Dial. If it connect successful you see the Message BluetoothConnection . Figure 29. Internet Option WindowStep 7 Before you connect to web side, be sure to set the BluetoothConnection device to be your default connection. Now, you can connect to web.
Page 24 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev2.0 Oct/29/2002UB2-2111-S User’s ManualWith the Bluetooth Software BTW 1.2.x or aboveTechnical SupportThe identification of the product:Product Name: UB2-2111-S Bluetooth USB ModuleModel Name: UB2-2111-SApplication: Desktop PC, NotebookTechnical Contact:Universal Scientific Industrial Co., Ltd.Address: 135, Lane 351, Taiping Rd., Sec. 1, Sec. 1, Tsao Tuen, Nan Tou, TaiwanContact Person: Chuei-Tang WangTelephone: +886-49-2325876 Ext.1800Fax: +886-49-2329561Email:ctwang@ms.usi.com.twWebsite: www.usi.com.twCAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment shouldbe installed and operated with minimum distance 2.5cm between the radiator and your body. Useon the supplied antenna. Unauthorized antenna, modification, or attachments could damage thetransmitter and may violate FCC regulations and may void the user's right to operate theequipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingTwo conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that mayCause undesired operation.
Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one of thefollowing measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, (example - use only shielded interface cableswhen connecting to computer or peripheral devices) any changes or modifications not expresslyapproved by the party responsible for compliance could void the user's authority to operate thisequipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.
This device is intended only for OEM integrators under the followingconditions:1) The transmitter module may not be co-located with any other transmitter orantenna.As long as conduction above is met, further transmitter test will not be required.However, the OEM integrator is still responsible for testing their end-productfor any additional compliance requirements required with this module installed(for example, digital device emissions, PC peripheral requirements, etc.).IMPORTANT NOTE: In the event that these conditions can not be met (forexample certain laptop configurations or co-location with another transmitter),then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integratorwill be responsible for re-evaluating the end product (including the transmitter)and obtaining a separate FCC authorization.End Product LabelingThe final end product must be labeled in a visible area with the following:“Contains TX FCC ID: IXMUB22111S ”.Manual Information That Must be IncludedThe OEM integrator has to be aware not to provide information to the end userregarding how to install or remove this RF module in the users manual of theend product which integrate this module.The users manual for OEM integrators must include the following informationin a prominent location “ IMPORTANT NOTE: To comply with FCC RFexposure compliance requirements. The antenna must not be co-located oroperating in conjunction with any other antenna or transmitter.

Navigation menu