Universal Electronics 2150 MTS Allstream, Atlas DVR IR/UHF Remote User Manual

Universal Electronics Inc MTS Allstream, Atlas DVR IR/UHF Remote Users Manual

UserManual.wiki >

Universal Electronics >

2150 User Manual >

Contents

1. Users Manual
2. Users Manual Part 2

Users Manual

ATLAS DVR/PVR IR/UHFRemote ControlTélécommande ATLAS ENP IR/UHFUsers GuideGuide d'utilisation

2TABLE OF CONTENTSIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Programming TV/VCR Combo Control . . . . . . . . . . . . . . . . . . . . . . . 10Searching for Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Checking the Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Using Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Learning Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Programming a Learned Key . . . . . . . . . . . . . . . . . . . . . . . . . 13Deleting a Single Learning Key. . . . . . . . . . . . . . . . . . . . . . . . 14Deleting All Learned Keys in a Specific Mode . . . . . . . . . . . . 14Programming Channel Control Lock . . . . . . . . . . . . . . . . . . . . . . . .15Unlocking Channel Control. . . . . . . . . . . . . . . . . . . . . . . . . . .15Locking Channel Control to MTS . . . . . . . . . . . . . . . . . . . . . .15Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Unlocking Volume Control for a Single Device (Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Unlocking All Volume Control (Global Volume Unlock) . . . . . 16Locking Volume Control To One Mode (Global Volume Lock) 17Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Programming the Master Power Key . . . . . . . . . . . . . . . . . . . 17Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . .18Clearing the Master Power Key . . . . . . . . . . . . . . . . . . . . . . . 18Re-Assigning Device Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Clearing Custom Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Checking Your Remote’s ID Code. . . . . . . . . . . . . . . . . . . . . . . . . . .19Changing Your Remote’s ID Code. . . . . . . . . . . . . . . . . . . . . . . . . . .20Using Your Remote’s RF Functionality . . . . . . . . . . . . . . . . . . . . . . . 20Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Table Des Matières . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Manufacturer’s Codes (Codes Des Fabricants) . . . . . . . . . . . . . . . . 54Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 61Setup Codes for Audio Receivers. . . . . . . . . . . . . . . . . . . . . . 61Setup Codes for Audio Accessories . . . . . . . . . . . . . . . . . . . . 63Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 64Setup Codes for TV/DVD Combos . . . . . . . . . . . . . . . . . . . . . . 68Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 69Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69M2150 01/07

3INTRODUCTIONThe Atlas DVR/PVR IR/UHF Remote by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, its packed with advanced features such as: • Preprogrammed control to operate the set-top box provided by MTS. • Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) • Programmable Master Power key for master on/off control of your home entertainment equipment with a single keystroke • Channel Lock to lock channel selection only to the set-top box • Volume Lock to lock volume controls to one mode or individual modes • Device Key Re-Assignment to remotely control a second (duplicate) device • Code Search to help program control of older or discontinued components • Color-coded keys to quickly locate popular functions • Code library for popular video and audio devices • RF capability to allow you to control your devices without being directly in front of them (for example, from another room).Before using the product, you need to install the enclosed batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control and MTS TV service.

4FEATURES AND FUNCTIONSUse the illustration below to locate features on the Atlas DVR/PVR IR/UHF Remote and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see “Device Table” on page 7.

5Key Charts Key FunctionUse SETUP for all programming sequences. Press PWR once to turn on or off a home entertainment device. For MASTER POWER control, see “Using the Master Power Key” on page 17. Press MTS, TV, DVD, AUD, or AUX once to select a home entertainment device to control. Also see “Device Table” on page 7. Each device key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals. Use GUIDE to display the program guide. Press MENU/SETTINGS once to display available interactive services. Use INFO to display the current channel and program information. Use DAY+ (or DAY-) to move a day forward (or back) on your set-top box’s program guide. Use the Cursor keys to move the cursor in the program guide and menu screens and to navigate within the interactive service. Use OK/SELECT to choose options, PPV events, and to tune programs from the program guide. Use PAGE+ (or PAGE-) to page up (or page down) through menu screens and the program guide. Use EXIT to exit out of your set-top box’s menu and guide. Use A, B, or C to access additional MTS features (see your MTS manual). Use VOL+ (or VOL-) to raise (or lower) the audio volume. Use FAV to cycle through your favorite channels stored in your set-top box.

6Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station. Press MUTE once to turn the sound off or on. Press LAST once to recall the last channel. Press PPV to access the Pay Per View menu and open the PPV program guide. Press HOME to access MTS TV On Demand.Press VOD to launch Video on Demand.Press CALL ID to open your Caller ID screen.Use to command your PVR to instantly replay the last 7 seconds of a program you are watching. Press LIST once to display a list of recorded shows on your PVR.Press LIVE to return to watching live TV. In all modes except MTS, use REW, PLAY, FFWD, STOP, and PAUSE to control a VCR, DVD player, or a PVR (after selecting a desired device). To record in the VCR mode, press REC twice. In the MTS mode, use these keys to control the DVR/PVR and VOD functions of the set-top box. Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09). For amplifiers/receivers, use the keypad numbers to select inputs 1 through 10. Press HD/ZOOM once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes). Key Function

7Device Table NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 9 or “Programming TV/VCR Combo Control” on page10.After programming, theAtlas DVR/PVR IR/UHF Remote can control the following types of devices: Use PIP ON-OFF to switch the Picture-In-Picture feature on or off (if available on your TV). Use PIP SWAP to switch images and sound between the main and window pictures. Use PIP MOVE to move the window picture to different positions in the main picture.Use PIP CH+ (or CH-) to select the next higher (or lower) PIP channel. In the MTS mode, use VIDEO SOURCE to view other video sources (A or B) instead of cable. In all other modes, use VIDEO SOURCE to watch TV or video programs on a desired device.For amplifiers/receivers, use VIDEO SOURCE to select an input source. Device Key Controls these types of devices VCR, TV/VCR Combo, PVR (Personal Video Recorder), or extra DVD Player DVD Player Audio Amplifier, Tuner, or Receiver Television MTS Set-top Box Key Function

8INSTALLING BATTERIES1. On the back of the remote control, push the tab and lift off the battery cover.2. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. 3. Align the covers keys with the cases holes and press the cover back into place. The tab should click when the cover is locked.NOTE: When batteries need replacement, the remote control ceases to operate. Replace the batteries and the unit is restored to its full functionality, complete with your favorite settings. 4. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) blinks once.❶❸❷

127. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, AUD, or MTS) for the device you are searching for. CHECKING THE CODESIf you have set up the Atlas DVR/PVR IR/UHF Remote by searching for your device code (on the previous page), you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: 5. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, AUD, or MTS) for the device you are checking. Write down the codes in the appropriate boxes on page 10.USING LEARNINGThe Atlas DVR/PVR IR/UHF Remote includes a Learning feature so you can add functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some considerations.Learning Precautions• Your original remote controls must be in working order for learning to work properly.1. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice.2. Enter 9 9 0. The TV key blinks twice.3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 10. NOTE: If a code digit is 0, the selected mode key does not blink. 4. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes on page 10.

13• Learned keys are mode-specific, so each one can store a unique function for each mode.• Do not use the following keys for learning: Device Keys, SETUP, Record (•), Tune-In Keys.• Learning capacity is approximately 16 to 25 keys, depending on the code being learned. • Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.• For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.NOTE: Please have your original remote controls handy before programming learning. Programming a Learned KeyNOTE: If more than 15 seconds pass between key presses, the remote exits programming.3. Place the Atlas DVR/PVR IR/UHF Remote head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the Atlas DVR/PVR IR/UHF Remote to learn.4. On the original remote, press and hold the key to be learned. The Atlas DVR/PVR IR/UHF Remote’s LED blinks rapidly, then turn off. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5.NOTE: If the LED displays one long flash instead, either your batteries are low, or the Atlas DVR/PVR IR/UHF Remote has a memory fault. In either case, the remote does not learn a new key. See “Additional Information” on page 25.2. Press a mode key once (i.e., MTS, TV, DVD, AUD, or AUX) to assign a mode for learning, then the key that learns the new code.2"

14Continue holding the key on the original remote until the Atlas DVR/PVR IR/UHF Remote’s LED blinks twice.NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit programming and review the “Learning Precautions” on the previous page. If needed, also see “Troubleshooting” on page 23. After review, start programming again at step 1.Deleting a Single Learning KeyThis process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see “Programming a Learned Key” on page 13)NOTE: If more than 15 seconds pass between key presses, the remote exits programming.3. Press the key containing the learned function to be deleted twice. The mode key blinks twice and exits from programming.Deleting All Learned Keys in a Specific ModeNOTE: If more than 15 seconds pass between key presses, the remote exits programming.5. Repeat steps 2 through 4 for another mode and/or key or press and hold SETUP to exit programming.1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6.2. Press a mode key once (i.e., MTS, TV, DVD, AUD, or AUX).1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6.2. Press a mode key twice (i.e., MTS, TV, DVD, AUD, or AUX) to clear all the learned keys for that mode. The mode key blinks twice and exits from programming.

15PROGRAMMING CHANNEL CONTROL LOCKBy default, the remote control’s channel-control capabilities are locked to the set-top box. The affected keys* are 1 through 0, CH+, CH-, ENTER, and LAST. This guarantees that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes. *NOTE: This feature does not affect the AUD mode. Unlocking Channel ControlNow the remote control provides TV and VCR channel-control capabilities while in the TV or VCR mode. Locking Channel Control to MTSNow, regardless of what mode you select (except AUD), the channel keys only change channels on your set-top box. CHANGING VOLUME LOCK Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On theAtlas DVR/PVR IR/UHF Remote, Global Volume Lock is set to 1. On the remote control, press MTS once; it blinks once. Press and hold SETUP until the MTS key blinks twice. 2. Enter 9 7 3. The MTS key blinks twice. 3. Press CH- once. The MTS key blinks four times.1. On the remote control, press MTS once; it blinks once. Press and hold SETUP until the MTS key blinks twice. 2. Enter 9 7 3.The MTS key blinks twice. 3. Press CH+ once. The MTS key blinks twice.

16TV, so you can control TV volume while in the AUX, DVD, TV or MTS mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. NOTE: The audio mode’s (AUD) volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will have control of the audio device’s volume in all other modes (i.e., AUX, DVD, TV, and MTS). This can be an advan-tage if, for example, you always listen to home entertainment devices through your receiver’s speakers.Unlocking Volume Control for a Single Device (Individual Volume Unlock)4. Repeat steps 1 through 3 for each device you want volume to be unlocked. Now, after you select a device that has volume unlocked (e.g., MTS), pressing VOL+, VOL-, or MUTE, controls only that device’s volume.Unlocking All Volume Control (Global Volume Unlock)NOTE: Performing these instructions sets indepen-dent volume control for all programmed devices. 1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., MTS) and press it once. Next, press and hold SETUP until the device key blinks twice. 2. Enter 9 9 3. The last-selected device key blinks twice. 3. Press VOL- once. The last-selected device key blinks four times. 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice.2. Enter 9 9 3. The last-selected device key blinks twice.3. Press VOL+ once. The last-selected device key blinks four times.

17Locking Volume Control To One Mode (Global Volume Lock)NOTE: The audio mode’s volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you control the audio device’s volume in all other modes (i.e., AUX, DVD, TV, or MTS). This can be an advantage if, for exam-ple, you always listen to home entertainment devices through your receiver’s speakers.Now, when you press VOL+, VOL-,or MUTE, the volume of the selected device (e.g., TV) is controlled regardless of mode.USING THE MASTER POWER KEY The Atlas DVR/PVR IR/UHF Remote has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. NOTE: By default MASTER POWER (PWR) will only control the TV and the MTS set-top box, no matter which mode button is pressed.Programming the Master Power Key1. On the remote control, press and hold SETUP until the last-selected device key blinks twice.2. Enter 9 9 3. The last-selected device key blinks twice.3. Select a mode (e.g., TV or AUD) which you want to use to control the volume. The selected device key blinks twice.1. On the remote control, press and hold SETUP until the last-selected device key blinks twice.2. Enter 9 9 5. The last-selected device key blinks twice.3. Press the device keys once in the order that you want them in the power-on sequence (e.g., MTS, TV, AUD).4. Press PWR. The last-selected device key blinks twice and the remote exits from programming.

18Using the Master Power KeyYou see the devices turn on or off according to the programmed sequence.Clearing the Master Power KeyRE-ASSIGNING DEVICE KEYS The Atlas DVR/PVR IR/UHF Remote can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a set-top box, and two DVD players, re-assign the unused AUX key to operate the second DVD Player as follows: NOTE: AUX is preset at the factory to control an RCA VCR. Performing the steps below overwrites those settings. The AUX key is now ready to be programmed for your second DVD player. See “Programming Device Control” on page 9. To re-assign other device keys, repeat these and substitute the key sequence using the following chart: 1.After programming, point the remote control at the devices and press and hold PWR for 1.5 seconds.1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 9 9 5. The last-selected device key blinks twice. 3. Press PWR. The last-selected device key blinks twice and the remote exits from programming.1. On the remote control, press AUX once; it blinks once. Then press and hold SETUP until the AUX key blinks twice.2. Enter 9 9 2. The AUX key blinks twice.3. Press DVD once, then press AUX once. The AUX key blinks twice.

19NOTE: Only one device can be assigned to an unused device key at a time. To re-assign another unused device key, substitute it for the AUX key above and then perform the sequence. For example, to re-assign an unused AUD key as a second DVD key, perform AUDÆSETUPÆ9Æ9Æ2ÆDVDÆAUD. When a re-assignment is done, the selected device key (e.g., AUD) blinks twice to confirm your choice. At that time, you need to program device control (see “Programming Device Control” on page 9). CHECKING YOUR REMOTE’S ID CODEIn order to use your Atlas DVR/PVR IR/UHF Remote’s RF functions, the remote must have an ID code of 1, 2, or 3. In order to control your MTS Set-top Box using IR, your remote must have an ID code of 0. To check your remote’s ID code, perform the following steps:To Re-Assign Perform Key Sequence AUX as 2nd AUD key AUXÆSETUPÆ9Æ9Æ2ÆAUDÆAUX AUX as 2nd TV key AUXÆSETUPÆ9Æ9Æ2ÆTVÆAUX AUX as 2nd MTS key AUXÆSETUPÆ9Æ9Æ2ÆMTSÆAUX AUX back to AUX AUXÆSETUPÆ9Æ9Æ2ÆAUXÆAUX 1.‘Press MTS once. Then press and hold SETUP until MTS blinks twice.2. Enter 9 5 6. 3. Press 1 once. Count the number of times the MTS key blinks (e.g., 3 blinks = 3). The number of blinks is your remote’s ID code.

20CHANGING YOUR REMOTE’S ID CODEIn order to use your remote’s RF functions, you may have to change its ID code. The remote’s ID code was set at the factory to 0, which controls the MTS Set-top Box using IR. To change the ID code, perform the following steps:USING YOUR REMOTE’S RF FUNCTIONALITYIn order to use the RF functionality of the Atlas DVR/PVR Remote, it must have a gateway ID set the same as the gateway ID on the Set-top Box to be controlled. To set/change the gateway ID of your Set-top Box, you must first set the new ID in your remote, then send the new ID to your Set-top Box.Setting the Gateway ID in Your Remote1.‘Press MTS once. Then press and hold SETUP until MTS blinks twice.2. Enter 9 5 4. 3. Press the digit for the desired remote ID code. Valid ID code numbers are 0, 1, 2, or 3. To enable your remote to transmit RF commands to your devices, only use codes 1, 2, or 3.1. Press MTS once. Then press and hold SETUP until MTS blinks twice.2. Enter 9 5 5.3. Enter the three digits for your new code. For example, enter 0 1 1 to change your set-top box’s ID to 011. Valid ID code digits range from 004 to 999.

21Sending the Gateway ID to the Set-top BoxNOTE: If you press A but did not change the ID num-ber, the set-top box displays a message indi-cating that the ID was already set to that number, for example, “The gateway ID was already set to 001.”Checking the Set-top Box’s Gateway IDTo check the set-top box’s gateway ID, perform the following steps:NOTE: If the remote’s gateway ID and the set-top box’s ID are not identical, the remote does not operate the set-top box while in RF mode (remote ID 1, 2, or 3).4. The MTS key blinks twice. You have successfully changed the gateway ID in your remote.1. Turn on your television and set-top box.2. Press MTS once. Then press and hold SETUP until the MTS key blinks twice. 3. Press A. This sends the new ID to the set-top box. The set-top box displays a message indicating that the ID has been changed. For example, if you changed the ID from 000 to 111, the set-top box displays “The gateway ID has changed from 000 to 111” on your TV.1. Turn on your TV and set-top box.2. Press MTS once. Press and hold SETUP until the MTS key blinks twice.3. Press B. The set-top box displays the current ID. For example, if the current ID is 001, the set-top box displays “The remote gateway ID is 001, the RG gateway ID is 001.”

22Checking the Remote’s Gateway IDYour remote can display the gateway ID currently programmed into it. To display the remote’s current gateway ID, perform the following steps:CLEARING CUSTOM PROGRAMMINGThe Atlas DVR/PVR IR/UHF Remote contains a Custom Programming Reset program. You can use it to remove all custom programming, except your setup codes and reassigned device keys.IMPORTANT: Executing this program erases all custom settings for Volume Lock, Learned Keys, Tune-In Keys, and Channel Lock. However, your device programming remains.1. Press MTS once. Then press and hold SETUP until the MTS key blinks twice.2. Enter 9 5 7.3. To view the code for the first digit, press 1 once. Count the number of times the MTS key blinks (e.g., 3 blinks = 3).4. Repeat step 3 two more times for the remaining digits. Use 2 for the second digit, and 3 for the third digit. 5. Write the ID code number down for later reference.1. On the remote control, press and hold SETUP until the last-selected device key blinks twice.2. Enter 9 8 0. The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared.

24FCC NOTICEThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • It is strongly recommended that the TV be plugged into a separate wall outlet.This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. FCC ID: MG32150

25ADDITIONAL INFORMATIONThis product does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Atlas DVR/PVR IR/UHF Remote. • For help via the Internet, visit us at: www.urcsupport.com ©Copyright 2005 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without prior written permission of Universal Electronics Inc.

Navigation menu