Uniform 680PAJ Payment Reader User Manual UIC680SG Simple Manual

Uniform Industrial Corp. Payment Reader UIC680SG Simple Manual

Manual

NFC Reader Simple Manual March 5, 2014 Page 1 of 2 NFC Reader Thank you for purchasing the NFC Reader series products. This EMV compliant NFC Reader is a passenger interface device primarily to provide secure contactless payment services utilizing Near Field Communication (NFC) technology. This device is also intended to provide contactless interface for passengers to utilize non-payment applications as listed in Features section of this manual. The NFC Reader communicates with a host computer or terminal using a standard USB interface. FEATURES Communicate with Near Field Communications (NFC) standard cards(passive), and NFC-enabled electronic mobile devices (active, i.e. smart phones, tablets) for electronic payments and data exchange. Supports ISO 14443 type A & B standard Supports ISO/IEC 18092 (peer to peer/NFCIP-1) Supports American Express ExpressPay, Discover DPAS, MasterCard PayPass, Visa payWave, JCB and China Union Pay Quickpass USB 2.0 Interface AGENCY APPROVAL Specifications for FCC Class B, CE Class B NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void your authority to operate such equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation
NFC Reader Simple Manual March 5, 2014 Page 2 of 2 SPECIFICATIONS Communication Compatible with USB 2.0 specification Power Requirements 5VDC Power Consumption 60mA in standby mode; 250mA in max rated load Operating Temperature -20 to 70 ℃ Operating Humidity 20 to 85% (non condensing) Dimensions 3.54 in[90mm] x 1.57 in [40mm] x 1.22 in [31mm] PIN ASSIGNMENT REF DES PIN NO. SIGNAL DESCRIPTION J1 1 NFC USB DATA HI 2 NFC USB DATA LO 3 NFC USB POWER 4 NFC USB POWER RETURN 5 NOT USED BACKSHELL NFC USB CABLE SHIELD Warnings:

Navigation menu