Uniden America UP744R 5.8 GHz Cordless Telephone w/Bluetooth User Manual Owners Manual part 2

Uniden America Corporation 5.8 GHz Cordless Telephone w/Bluetooth Owners Manual part 2

Owners Manual part 2

Using Your Phone[53] Using Your Phonewww.uniden.comFrom the base1) Press corresponding soft key (LAND or MOBILE) on the base to join the conference call.2) To hang up, press /flash on the base. The handset(s) will still be connected to the call.From a second handset1) Press corresponding soft key (LAND or MOBILE) on the handset to join the call.2) To hang up, return the handset to the cradle, or press end on the handset. The base or other handset will still be connected to the call.Conferencing with one outside lineTo hold a conference call with one outside line, simply have the handsets or base join the call.Conferencing with telephone line (LAND / MOBILE)Follow the steps below to allow both outside lines to participate in a conference call:1) During a call, press back/hold/intercom twice to put the first caller on hold.2) Press the line soft key (LAND or MOBILE) for a free line to make or answer a second call.3) When the second call is connected, press menu/select and select %QPHGTGPEG to initiate a conference call.4) To disconnect a single caller, press the corresponding soft key (LAND or MOBILE) to place the caller you wish to keep speaking to on hold and then press the ENDsoft key to hang up the other caller.UP744.book Page 53 Friday, November 5, 2004 4:22 PM
Using Your PhoneUsing Your Phone [54]www.uniden.comFor example, to hang up MOBILE line but leave LAND line connected:-Press LAND soft key to put LAND line on hold.-Press end to hang up MOBILE line.-Press the LAND soft key to take LAND line off hold and continue the conversation.To hang up both lines, press talk/flash or (or /flash on the base).Mobile Line TransferTo forward or receive a call from or to MOBILE line. Follow the steps below;From MOBILE linePress the MOBILE soft key during a call, and then the CONNECT soft key.To MOBILE linePress menu/select during a call, and select 6TCPUHGT /QDKNG.6TCPUHGTTGF appears and the phone return to standby mode. UP744.book Page 54 Friday, November 5, 2004 4:22 PM
Using Your Phone[55] Using Your Phonewww.uniden.comRedialing CallsYou can quickly redial the last 20 phone numbers for each handset and 10 numbers for the base.With the phone in standby mode, press redial/ on the handset (or press the MENU soft key, and then select redial on the base). This brings up the redial list. Use up/down key to scroll through the numbers, and select the number you want to dial.Press talk/flash (or /flash) or on the base to dial the selected number. If you want to call using Mobile line, press the CALL soft key, then MOBILE soft key. Use up/down key to select the cellular phone to use and press CONNECT soft key.You can also display the list for redial number with the phone in talk mode. After select the redial number, press the DIAL soft key to redial the number.Deleting Redial RecordsIf you want to delete a phone number from the redial list, go to the redial list in standby mode, and select the number you want to delete. Press the OPTIONS soft key, and select &GNGVG5GNGEVKQP, and then ;GU. If you want to delete all the redial records, select&GNGVG#NN and then ;GU.4GFKCN 126+105126+105%#..%#..•Each redial record can store up to 32 digits.•To store redial numbers in the Phonebook, see page 66. noteUP744.book Page 55 Friday, November 5, 2004 4:22 PM
Using Your PhoneUsing Your Phone [56]www.uniden.comAdjusting the Base Ringer and SpeakerAdjusting the base ringer volumeYou can choose from three ringer settings on the base: off, low, and high. When the phone is in standby mode, go to Rings/Volumes menu, and then select 4KPIGT8QNWOG. Use up/down key to select the Tel type (LAND or MOBILE), and press menu/select.Use up/down key to select the ringer volume, and menu/select.You will here a confirmation tone. Adjusting the base speaker volumeYou can adjust the volume of the answering machine speaker while a message is playing. Press volume up/down during a message to choose one of the 10 volume levels.You can also set the speaker volume from the base. Go to Rings/Volumes menu, and then select 5RGCMGT8QNWOG. Use the up/down key to select the speaker volume, and then menu/select. You will here a confirmation tone.UP744.book Page 56 Friday, November 5, 2004 4:22 PM
Using Your Phone[57] Using Your Phonewww.uniden.comUsing the Handset Volume Setting MenuRinger: Adjust the handset ringer volumeYou can choose from three different ringer volume settings on your handset: off, low, and high. When the phone is in standby mode, go to the Rings/Volumes menu, and then select Ringer Options. Use up/down key to select the Tel type (LAND or MOBILE), and press menu/select. Use up/down key to select the ringer volume, and menu/select. You will here a confirmation tone.Ear speaker: Adjust the handset earpiece volume During a call.You can choose from six volume levels for the earpiece speaker. To adjust the earpiece volume, go to Speaker Setup menu, and select 'CTRKGEG8QNWOG and select the volume level you want to use.You can also adjust the earpiece volume during a call by pressing volume up/down keys, and then up (to make it louder) or down (to make it softer).4KPIGT8QNWOG*KIJ5'.'%65'.'%64KPIGT1RVKQPU'CTRKGEG5'.'%65'.'%65'.'%65RGCMGT5GVWRUP744.book Page 57 Friday, November 5, 2004 4:22 PM
Using Your PhoneUsing Your Phone [58]www.uniden.comSpeaker: Adjust the handset speaker volumeYou can choose from six volume levels for the handset speakerphone. To adjust the speaker volume, go to Speaker Setup menu, and select 5RGCMGT XQNWOG select the volume level you want to use.You can also adjust the handset speaker volume during a call by and then (to make it louder) or down (to make it softer).Audio ToneIf you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece. Your phone gives you three audio tone options: low, Natural or high. Go to Speaker Setup menu, and select #WFKQ6QPG and select the option that sounds best to you.(Audio tone adjustments only apply to the earpiece, not the speakerphone.)5RGCMGT5'.'%65'.'%6#WFKQ6QPG5'.'%6+EY6QPGUP744.book Page 58 Friday, November 5, 2004 4:22 PM
Using Your Phone[59] Using Your Phonewww.uniden.comMuteWhile the handset is ringing, you can mute the handset ringer for this call by pressing end on the handset. To mute the base ringer press on the base. The phone will ring again on the next call.Mute the Handset MicrophoneWhen you're on the phone, press the OPTIONS key and select /WVG to turn off the microphone so the caller can't hear you. The display shows /WVG1P while the microphone is muted. To turn off muting, repeat the above step again.Tone Dialing Switch OverIf your telephone company uses pulse dialing, you can switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc.If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press the */tone key. Any digits you enter from then on will be sent as tone digits. When this particular call ends, the phone automatically returns to pulse dialing mode.You can only mute the handset ringer if the handset is off the base when the phone starts ringing.noteUP744.book Page 59 Friday, November 5, 2004 4:22 PM
Using Your PhoneUsing Your Phone [60]www.uniden.comPrivacy ModePrivacy mode prevents interruption from other registered handsets or the base. This works only when the phone is in use. While on a call, press the OPTIONS soft key on the handset or base. Use up/down key to select call privacy. Privacy mode On and appear in the display. To exit Privacy Mode, Use the same procedure. Privacy Mode Off appears.Find HandsetTo locate the handset, press end/find hs on the base when the phone is in standby mode. Select the handset to page. The handset beep for 60 seconds, and 2CIKPI appears on the handset display. To cancel paging, press any key on the handset or end/find hs on the base.126+105126+1056CNM2TKXCE[OQFG1PUP744.book Page 60 Friday, November 5, 2004 4:22 PM
Reminder (Handset only)[61] Reminder (Handset only)www.uniden.comReminder (Handset only)Your phone has a built-in calendar that you can use to schedule reminders and appointments (all the way through December 31, 2099). You can set alarms for up to 30 different events.A pop-up screen appears and reminder tone sounds when the scheduled time & date comes. To show detailed info on the reminder, press the VIEW soft key. To mute the reminder tone, press the MUTE key.To reset the reminder and clear the screen, press end when reminder tone stops. 6QFKUOKUU4GOKPFGT&KURNC[RGTUU&+5/+55appears. Press the DIMISS key. The phone return to standby mode.Scheduling a reminderSelect the reminder option to show Reminder (Calendar). Today is highlighted. If the reminder is set for the morning, a bar appears lower left of the date number; if the reminder is set for the afternoon or evening, a bar appears lower right of the date number. Use up, down, right or left key to move the cursor to the date. 5'.'%64GOKPFGT4GOKPFGT /C[5%*'&7.'5%*'&7.'UP744.book Page 61 Friday, November 5, 2004 4:22 PM
Reminder (Handset only)Reminder (Handset only) [62]www.uniden.com1) Press menu/select to select day.2) Press the STORE soft key to add a reminder.3) Use the number keypad to change the day and time.4) Use the number keypad or * to select the hours and minutes. Press menu/select when you're finished.5) To change the title, select and press menu/select.Use the number keypad, */tone, #, left, right key, and the DELETE soft key. Press menu/select when you're finished.6) If you want to set recurrence, press , and press menu/select. Select frequency (None, Daily, Weekly, Monthly, Yearly) from the list. Press menu/select when you're finished.7) If you want your phone to ring when this reminder occurs, move to the line indicated, and press menu/select. Select the ringer tone you want the phone to ring. Press menu/select when you're finished.8) To enter a reminder text for this reminder, select and press menu/select. 'FKV/GUUCIG appears. You can enter up to 80 digits. Press menu/select when you're finished.9) When everything is correct, press the DONE soft key. Editing and deleting remindersYou can edit reminders by pressing the SCHEDULE soft key and selecting the reminder by pressing the OPTION key. Once the reminders is selected, you can edit the date, time, reminder tone, and text the same way you entered them for a new entry. To delete reminders, select the reminder and press the OPTION soft key. Select &GNGVG5GNGEVKQP. To delete all reminders, select &GNGVG#NN./10126+105UP744.book Page 62 Friday, November 5, 2004 4:22 PM
Using the Phonebook[63] Using the Phonebookwww.uniden.comUsing the Phonebook Your phone lets you store up to 100 entries in each handset and base. You can store up to 4 phone numbers for each name in your phonebook (for a total of 400 numbers), and you assign names to groups for easy searching. You can store a distinctive ringer tone, picture display, and backlight color to your each or group. You can enter your phonebook by Pressing the phonebook key on the handset or base.Creating and Editing Phonebook EntriesGo to the phonebook and press the OPTIONS soft key. Select 0GY'PVT[ to store, or 'FKV5GNGEVKQP to edit the location. Enter as much of the following information as you want. Press menu/select to enter each entry and confirm the selection. When you're finished, press the DONE soft key to save this phonebook entry.UP744.book Page 63 Friday, November 5, 2004 4:22 PM
Using the PhonebookUsing the Phonebook [64]www.uniden.comStep 1: Name , Select , and use the keypad to enter the name for this entry. You can enter up to 16 characters. If you don't want to enter a name, your phone will store this entry as No Name. Press menu/select when you're finished, and your phone will go back to the current phonebook entry.Step 2: Number , Select , and enter a phone number for this entry. If you need your phone to pause between digits when it's dialing (for example, to enter an extension or an access code), press the PAUSE soft key to insert a two-second pause. You'll see a 2 in the display. You can stack more than one pause together if two seconds isn't long enough. Each pause counts as one digit; you can enter up to 20 digits for the phone number. Press menu/selectwhen you're finished, and your phone will go back to the current phonebook entry.You can select an icon to remind you which number this is: home , , work , , mobile , , or general phone number. Press menu/select when you're finished.Step 3: Unique Ring , Select , to attach a special ring to this phone. Select the ringer tone you want the phone to use when this person calls, or select 0Q5GNGEVKQP to have the phone use its regular ringer tone. Press menu/select when you're finished, and your phone will go back to the current phonebook entry.(NKEMGT126+105,CPG5OKVJ126+1050,CPG5OKVJ/'55#)'You can save up to 4 numbers for each phonebook entry. If you try to save more than 4 numbers for a phonebook entry, your phone will display Dial data is full. You'll have to delete one of the existing numbers before you add a new one.noteUP744.book Page 64 Friday, November 5, 2004 4:22 PM
Using the Phonebook[65 ] Using the Phonebookwww.uniden.comStep 4: Unique Display (Handset only) Select to attach a special screen display to this entry. Select the display you want the phone to use when this person calls, or select No Selection to have the phone use its regular display. You can press the VIEW soft key to see the display choices:Press menu/select when you're finished, and your phone will go back to the current phonebook entry.Step 5: Phonebook Group , Select , to place this entry into a phonebook group. Select the group (0-9) you want this entry to belong to, or select No Selection to leave the entry outside of any group. Press menu/select when you're finished, and your phone will go back to the current phonebook entry. See page 68 for information on creating and editing groups. To select a group, see page 68. Step 6: Speed Dial , Select 0-9 to save this number to one of the 10 speed dial numbers or 0Q5GNGEVKQPif you don't want to save it to a speed dial number. If there's already a phone number saved to the speed dial number you select, your phone will ask if you want to overwrite the number. Press menu/select when you're finished, and your phone will go back to the current phonebook entry.UP744.book Page 65 Friday, November 5, 2004 4:22 PM
Using the PhonebookUsing the Phonebook [66]www.uniden.comStoring Caller ID or Redial Numbers in the PhonebookYou can store Caller ID or redial numbers in your phonebook so you can use them later. Go to the Caller ID list or redial list and select the number you want to store. (If the Caller ID information didn't include the number, then you can't store it.) Press the OPTIONS soft key and select #FFVQ2JQPGDQQM. Your phone will create a phonebook entry so you can enter the additional information shown on page 63.If the number you want to save is already in the phonebook, your phone will display 6JKUFCVCKUCNTGCF[UVQTGF.Managing the PhonebookWith the OPTIONS soft key, you can delete phonebook entries, copy entries to another handset, check how many empty phonebook and speed dial entries you have available, sort your phonebook by groups, and name phonebook groups.Deleting phonebook entriesGo to the phonebook and select the entry you want to delete. Press the OPTIONSsoft key and select &GNGVG. Use up/down key to select &GNGVG5GNGEVKQP. Your phone will ask you to confirm select ;GU.To delete all the entries from your phonebook, go to the phonebook and press the OPTIONS soft key without selecting an entry. Select &GNGVG, and then &GNGVG#NN.Your phone will ask you to confirm select ;GU.Copying phonebook entries to another handsetWhen you copy entries to another handset or base, the group and speed dial information won't be transferred. Your phone will cancel the copying process if any one of the following things occurs:UP744.book Page 66 Friday, November 5, 2004 4:22 PM
Using the Phonebook[67 ] Using the Phonebookwww.uniden.com-- If the handset you are copying to doesn't have enough memory (the phone will show "Not enough memory in receiving unit").-- If the handset you are copying to already has that phone number in its phonebook.-- A call comes in during the copying process.To copy a single entry, go to the Phonebook and select the entry you want to copy. Press the OPTIONS soft key and then %QR[5GNGEVKQP. Select the handset or base you want to copy to the entry to.To copy all the phonebook entries, go to the phonebook and press the OPTIONS soft key without selecting an entry. Select then %QR[#NN. Select the handset or base you want to copy to the entry to.Checking the number of stored entriesTo see how many phonebook entries you have, go to the phonebook and press the OPTIONS soft key and select 2JQPG$M%CRCEKV[. The phone will show you how many stored names (entries) and how many stored phone numbers (total) you have.To see your speed dial entries, go to the phonebook and press the OPTIONS key and select %JGEM &KCNU. The phone will show you which speed dial numbers have phone numbers stored in them. 6QYJKEJWPKV!*CPFUGV*CPFUGV*CPFUGV$CUG5'.'%61RVKQPU 0GY'PVT['FKV5GNGEVKQP&GNGVG5GNGEVKQP%QR[5GNGEVKQP2JQPG$M%CRCEKV[&GNGVG#NN5'.'%6UP744.book Page 67 Friday, November 5, 2004 4:22 PM
Using the PhonebookUsing the Phonebook [68]www.uniden.comChanging the sorting orderTo change the sorting of your phonebook, go to the phonebook and press the OPTIONS soft key and select 5QTV. Select #NRJCDGVKECNN[ to see the list of names in alphabetical order; select )TQWR to see the list of groups in alphabetical order. Enter a letter from the keypad to jump to the first entry beginning with that letter.Naming phonebook groupsYour phone comes with 10 groups to organize your phonebook. You can name groups things like "Family" or "Friends" or "Softball team" to let you find entries in your phonebook more quickly.To name a group, go to the phonebook and press the OPTIONS soft key and select 'FKV)TQWR0COG. Select the group number (0-9) you want to edit, and enter the name you want for this group using the number keypad. Press menu/select when you're finished.To delete the group, go to the phonebook, and view the list of groups (see xx). Press the OPTIONS soft key and select Delete and then Delete Groups. Your phone will ask you to confirm select ;GU.Making Calls with the PhonebookTo call someone in your phonebook, go to the phonebook and select that person's phonebook entry. Select the number (one of the four available) that you want to call, and then press the CALL soft key Press the LAND or MOBILE soft key. The number at the top of the list will dial. You can also dial the number with the phone in talk mode. After select number, press the DIAL soft key.LCD 83-1To make a speed dial using the mobile line, press the MOBILE soft key.noteUP744.book Page 68 Friday, November 5, 2004 4:22 PM
Using the Phonebook[69 ] Using the Phonebookwww.uniden.comUsing the Speed DialFlip the top panel up. Press and hold the number of the speed dial entry you want to call until the phonebook location appears. Use up/down key to select a number. Press talk/flash, , or the LAND soft keyUP744.book Page 69 Friday, November 5, 2004 4:22 PM
Caller ID FeaturesCaller ID Features [70]www.uniden.comCaller ID FeaturesIf you subscribe to Caller ID from your phone company, your phone will show you the caller's phone number and name (if available) whenever a call comes in:If you subscribe to both Call Waiting and Caller ID the phone also show you the name and the number of call waiting calls (that is, calls that come in while you're on the line.)If your cellular phone is a Bluetooth v 1.1 compliant, the phone allow you to register your cellular phone to use them as one of a handset.Using the Caller ID ListYou can store up to 100 Caller ID numbers in each handset or the base. To see the Caller ID list, press the caller id key on the handset or base. The phone will show the Caller ID list. You can use up/down key to scroll through the list, or you enter a letter with the keypad to jump to the first caller ID name that starts with that letter. If anyone in your phonebook has called you, the icon assigned to their number will appear in the Caller ID list.%CNNGT+& 2/,CPG5OKVJ/1$+.'/1$+.'.#0&.#0&/1$+.'0##TVVUWDCMK/'55#)'.#0&UP744.book Page 70 Friday, November 5, 2004 4:22 PM
Caller ID Features[71 ] Caller ID Featureswww.uniden.comIf you want to see how many Caller ID numbers are stored in your phone, Press the caller id key, and then the OPTIONS soft key. Select%+&%CRCEKV[.Calling someone from the Caller ID list Go to the Caller ID list and select the number you want to call. If you need to add a "1" to the number for a long distance call, press */tone. If you need to add your saved area code to the number, press #. Then press talk/flash, , or the LAND or MOBILE soft key to dial the number.Deleting Caller ID numbersTo delete only one Caller ID number, go to the Caller ID list and select the number you want to delete. Press the OPTION soft key, and select &GNGVG 5GNGEVKQP. When the phone asks you to confirm, select ;GU.To delete all the Caller ID numbers, go to the Caller ID list and press the OPTIONsoft key. Select &GNGVG#NN. When the phone asks you to confirm, select ;GU.1RVKQPU &GNGVG5GNGEVKQP&GNGVG#NN#FFVQ2JQPGDQQM%+&%CRCEKV[5'.'%6When you delete a Caller ID number, you delete it permanently. noteUP744.book Page 71 Friday, November 5, 2004 4:22 PM
Answering MachineAnswering Machine [72]www.uniden.comAnswering MachineThe phone has a built-in answering machine that answers and records incoming calls. You can also use your answering machine to record a conversation, leave a voice memo message, or announce a special outgoing message to callers when you're away from your phone.Features• Digital Tapeless Recording• Up to 12-15 minutes of Recording Time• Call Screening• Personal or prerecorded Outgoing Messages• Voice Prompts (English, Spanish, or French) • Time and Day Announcement• Remote Message Retrieval• Toll Saver• Conversation Recording•Voice Memo• Message Alert On/Off• Retrieve Messages using Handset• Do Not Disturb • Hands-free Speakerphone The Answering Machine only works with the land line.noteUP744.book Page 72 Friday, November 5, 2004 4:22 PM
Answering Machine[73 ] Answering Machinewww.uniden.comSetting Up the Answering MachineTo access the answering machine settings, go to the System Setup Menu and select Answer Machine.Security CodeIf you want to call in and get your messages when you're away from, you'll have to set a security code. Go to #PUYGT/CEJKPGand select 5GEWTKV[%QFG. use the keypad to enter a two-digit number (01-99), and press menu/select when you're done. A confirmation tone tells you the security code has been saved.5GEWTKV[%QFG5'.'%65'.'%65[UVGO5GVWRUP744.book Page 73 Friday, November 5, 2004 4:22 PM
Answering MachineAnswering Machine [74]www.uniden.comRing TimeYou can set the number of times the phone will ring before the machine answers the call. Go to #PUYGT/CEJKPG and select 4KPI6KOG. Then select the number of times you want the phone to ring; choose from 2, 4, or 6 times. The Toll Saver feature makes the answering machine answer after two rings if you have new messages and after four rings if you don't. If you call long distance to check your messages, Toll Saver lets you hang up after three rings and not get charged for the call. Record TimeYou can set how long a caller has to leave a message before the answering machine hangs up. Go to #PUYGT/CEJKPG and select 4GEQTF6KOG. Then select the maximum length of messages; choose from 1 minute or 4 minutes. The Announce Only feature makes the answering machine answer call but it won't let callers leave a message. When the Announce Only feature is on, and will appear on the base.4KPI6KOG6QNN5CXGT6KOGU6KOGUVKOGU5'.'%64GEQTF6KOGOKPWVGOKPWVGU#PPQWPEG1PN[5'.'%6UP744.book Page 74 Friday, November 5, 2004 4:22 PM
Answering Machine[75 ] Answering Machinewww.uniden.comMessage Alertif you want the answering machine to beep every 15 seconds whenever you have unheard messages, turn on the message alert tone. Go to #PUYGT/CEJKPG and select /GUUCIG#NGTV. Select 1P.A confirmation tone tells you the setting has been saved. The message alert turns off automatically after you listen to all your new messages. You can also turn off the message alert by pressing any key on the base.LanguageTo change the language of your answering machine's voice prompts and pre-recorded greetings, go to #PUYGT/CEJKPG and select .CPIWCIG. Select 'PINKUJ,(TCP㩟CKU (French), or 'URC 㩌 QN(Spanish). Call ScreenIf you want to be able to listen to the caller's message before you answer, turn on the call screen feature. Go to#PUYGT/CEJKPG and select %CNN5ETGGP. Select 1P to turn on call screening./GUUCIG#NGTV1P1HH5'.'%6.CPIWCIG'PINKUJ(TCP㩟CKU'URC㩌QN5'.'%6%CNN5ETGGP1P1HH5'.'%6UP744.book Page 75 Friday, November 5, 2004 4:22 PM
Answering MachineAnswering Machine [76]www.uniden.comSetting Your Outgoing GreetingYour answering machine comes with a prerecorded greeting: "Hello. No one is available to take your call. Please leave a message after the tone." You can use this greeting, or you can record your own.Recording a greetingFrom the baseTo record your own greeting, make sure the phone is in standby mode. Go to Record Greeting, and then press menu/select. Press the START soft key. After the answering machine says, "Record greeting," you can start recording. The message counter displays 30 and then begins to count down. When you're finished, press the STOPsoft key. The answering machine will play back your greeting so you can hear it.From the handsetSelect , and then AnsMachine. The display tells you how many new and oldmessages you have. Press /8. After the answering machine says, 4GEQTFITGGVKPI, you can start recording. When you're finished, press /8 key.Choosing a greetingFrom the baseTo choose between the two greetings, first make sure the phone is in standby mode. Go to #PUYGT/CEJKPG, and select GreetingOptions. The greeting currently being used will be played. If you want to use the other greeting, press the CHANGE soft key.•To finish the setting, press back/hold/intercom.•You will hear a beeping tone while you set greetings and play massages from the handset. •Your own greeting must be more than 2 seconds and less than 30 seconds.noteUP744.book Page 76 Friday, November 5, 2004 4:22 PM
Answering Machine[77 ] Answering Machinewww.uniden.comIf you want to delete your greeting, press the DELETE soft key while the greeting is playing (You can't delete the prerecorded greeting.)From the handsetSelect , and then AnsMachine. The display tells you how many new and old messages you have. Press /6. The greeting currently being used will be played. If you want to use the other greeting, press the key again.If you want to delete your greeting, press the /4 soft key while the greeting isplaying (You can't delete the prerecorded greeting.)Using the Answering MachineTurning On the Answering MachineTo turn your answering machine on and off, on the handset, go to #PUYGT/CEJKPG,and select 1P1HH UGVVKPI. Choose 1Pto turn the answering machine on or 1HH to turn it off. You can also turn on/off the machine using handset remote function. Select , and then AnsMachine. The display tells you how many new and old messages you have. Press /9. Each time the key is pressed the setting switches between On and Off.UP744.book Page 77 Friday, November 5, 2004 4:22 PM
Answering MachineAnswering Machine [78]www.uniden.comFor from the base, with the phone in standby mode, press answer on/off./'55#)'10. If the number is flashed, then there are new messages waiting for you. To do turn your answering machine off, press answer on/off.Reviewing MessagesWhen you have a new message, the new message LED on the handset blinks and the base LCD rights. The LED and the base LCD will turn off stops blinking when you've listened to all your new messages. The answering machine plays your new messages first. After you play all your new messages, you can then play your old messages. Old messages will be played in the order in which they were received.UP744.book Page 78 Friday, November 5, 2004 4:22 PM
Answering Machine[79 ] Answering Machinewww.uniden.comYou can review your messages from the base or from the handset:From the base From the handsetPlaying your messagesPress . The answering machine tells you how many new and old messages you have. It announces the message number, plays the message, then announces the time and date that message was received.Select , and then AnsMachine. The display tells you how many new and old messages you have. Press /2 to play your messages. After playing the message, the answering machine announces the time and date that message was received.Repeating a messagePress once to repeat to the beginning of the current message. Press repeatedly to go back to a previous message.Press and hold to rewind through the current message.Press /1 once to repeat to the beginning of the current message.Press /1 repeatedly to go back to a previous message.Skipping a messagePress to go to the beginning of the next message. Press and hold to fast forward through the current message.Press /3 to go to the beginning of the next message. Press and hold /3 to fast forward through the current message.Delete a messageWhile a message is playing, press to delete it. The message is permanently deleted.While a message is playing, press /4to delete it. The message is permanently deleted.Delete all messagesWhile the phone is in standby, press to delete all messages. When the answering machine asks you to confirm, press delete again. All messages are permanently deleted.-Stop reviewing messages Press to stop the message playback and return to standby.Press /5 to stop the message playback. Press end to exit the message system and return to standby.•You can't delete unheard messages. If you try to delete messages before listening to them, the answering machine will beep and say "Please playback all messages."•If you press during the first two seconds (or press /1 during the first 4 seconds) of a message, the answering machine goes back to the previous message. noteUP744.book Page 79 Friday, November 5, 2004 4:22 PM
Answering MachineAnswering Machine [80]www.uniden.comRecording a phone conversationYou can record a phone conversation with your handset or base. The conversation has to last more than two seconds and less than ten minutes. During a conversation, press menu/select (for base, then press the OPTIONS soft key). Use up/down key to select %CNN4GEQTF. The handset or the base sounds a confirmation tone that can be heard by both parties and displays 4GEQTFKPI CECNN. When you want to stop recording, press menu/select and select Call Record again.Screening CallsYou can screen calls from the base: just let the answering machine answer the call and listen to the caller leave a message. Answer the phone if you want to talk to the caller. To mute the call screen, press .If you turn on the call screen feature (see page 75), you can also screen calls from the handset. Let the answering machine answer the call, then press the volume up key. If you want to talk to the caller, just press talk/flash, and the answering machine will stop recording. To mute the call screen, press end.•If the recording memory is full, 7PCXCKNCDNG appears in the display. You can not record a conversation until you clear some messages from the memory.•Every state has different regulations governing the recording of conversations over the telephone. Make sure to check your local, state and federal laws before using this product to record any telephone conversation in order to determine that your use is in compliance with such laws or guidelines.•You can not record intercom conversations.•Only one handset can screen calls at a time. If another handset is screening the call, you'll just hear a beep when you try to screen the call, too.noteUP744.book Page 80 Friday, November 5, 2004 4:22 PM
Answering Machine[81 ] Answering Machinewww.uniden.comDo Not Disturb (DND)The do not disturb feature (DND) allows you to mute the ringer, the base, and any registered handsets at the same time. The phone must be in standby mode. Press and hold dnd on the base. You will hear a confirmation tone, and the dnd LED illuminates. To cancel the DND feature, press dnd again. You can also mute the ringer tone while the phone is ringing by pressing dnd on the base.Activating the DND while the answering system is off will turn the answering system on automatically. The answering system setting will reset to the original setting when you cancel the DND.Recording a voice memoThe voice memo function allows the user to record messages (more than 2 seconds and less than 4 minutes). To record your own greeting, make sure the phone is in standby mode. Press menu/select on the base. Select 4GEQTF/GOQ and press menu/select. Press the START soft key. After the answering machine says, "Record greeting," you can start recording. When you're finished, press the STOP soft key. The answering machine will play back your greeting so you can hear it.You can also record a voice memo remotely, select , and then AnsMachine. The display tells you how many new and old messages you have.Press /7. After the answering machine says, 4GEQTFITGGVKPI, you can start recording. When you're finished, press /7 key.UP744.book Page 81 Friday, November 5, 2004 4:22 PM
Answering MachineAnswering Machine [82]www.uniden.comRemote OperationYou can check, play, or delete messages when you are away from home. You can also record, select, or delete your own greeting message. To access your answering machine remotely, you need a touch tone telephone and a two-digit security code (see Setting a Security Code on page 73).1) Call your telephone number and wait for the system to answer. If Toll Saver is enabled, answering machine will answer in 2 rings if you have new messages and 4 rings if you don't. If the answering machine is off, it will answer after about 10 rings and sound a series of beeps.2) During the greeting message (or a series of beeps when the answering machine is off), press 0 and enter your security code within two seconds.3) The answering machine announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." Then, you'll hear a beep.4) Enter a command from the following chart within 15 seconds. After the first command, you have two seconds to enter each command.•The system will only play back messages for four minutes and then it returns to the command waiting mode.•To continue playing your messages, press 0 then 2 again within 15 seconds.•If you enter an incorrect security code three times, you will hear a beep and the system will return to standby.•For your convenience, a remote operation card is provided for you to use while away from home (refer to page 102).noteUP744.book Page 82 Friday, November 5, 2004 4:22 PM
Answering Machine[83 ] Answering Machinewww.uniden.com* For the Repeat a Message function, press 0 then 1 within about 2 seconds to repeat the previous message, or press 0 then 1 after about 2 seconds to repeat the current message.**The first time you enter the Memo Record or the Greeting Message Record command, the answering machine will start recording. Enter the same command again to stop recording.5) After the command has finished, you hear intermittent beeps indicating that the system is in the command waiting mode. You can enter another command from the chart, or you can hang up to exit the system.6) When you hang up, the answering machine automatically returns to standby.Command Function Command Function0 then 1Repeat a Message* 0 then 6answering machine On0 then 2Play incoming Messages 0 then 7Memo Record/Stop**0 then 3Skip a Message 0 then 8Greeting Message Record/Stop**0 then 4Delete a Message 0 then 9answering machine Off0 then 5Stop Operation 1 then 0HelpUP744.book Page 83 Friday, November 5, 2004 4:22 PM
Multi-Handset FeaturesMulti-Handset Features [84]www.uniden.comMulti-Handset FeaturesThe features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see "Expanding Your Phone" on page 13.Using DirectLink ModeIn DirectLink Mode, a pair of handsets can function as two-way radios. DirectLink Mode does not interfere with the main base's ability to make or receive telephone calls. You must set both handsets to DirectLink Mode to make a directlink call.To enter DirectLink mode, Select Direct Link option in the main menu. And then press the ENTER soft key. Direct Link Mode Complete appears when you enter the DirectLink Mode mode.To make a DirectLink call, press the DirectLink soft key. Select the handset you want to call. To cancel the call, Press end. To answer a DirectLink call, Press talk/flash. Press end when you want to hang up.5'.'%6&KTGEV.KPM•If the party is out of range,0Q5KIPCNappears in the display, and the operation will be canceled.•While a pair of handsets are in DirectLink Monitor mode, they cannot be used to make or receive calls. Other handsets can still make and receive calls.noteUP744.book Page 84 Friday, November 5, 2004 4:22 PM
Multi-Handset Features[85] Multi-Handset Featureswww.uniden.comTo exit DirectLink mode and be able to receive normal phone calls again, press the CANCEL soft key, and then press the OK soft key.Room/Baby MonitorThis feature allows you to monitor sounds in another room. Place a handset or the base in the room you wish to monitor; it will function as a microphone. A second handset or the base can be used as a remote speaker, allowing you to monitor sounds in the room.Using Room/Baby MonitorTo enter Room Monitor mode, press menu/select. Then select the Room Monitor. Select the handset or base you want to monitor. Press end or end/find HS when you want to stop monitoring.To prevent the monitoring of a particular handset or the base, simply turn off the Room Monitor feature on that handset or on the base.To turn off the Room Monitor, go to System Setup, Base/Handset Setup Menu, and then "Room Monitor."Select 1P. You will hear a confirmation tone.5'.'%64QQO/QPKVQT•This feature only works when both handsets are within the range of the base.•If the party is out of range,0Q5KIPCNappears in the display, and the operation will be canceled.•While a pair of handsets are in Room/Baby Monitor mode, they cannot be used to make or receive calls. Other handsets can still make and receive calls.noteUP744.book Page 85 Friday, November 5, 2004 4:22 PM
Multi-Handset FeaturesMulti-Handset Features [86]www.uniden.comIntercomYou can use the intercom to talk to another handset without using the phone line. While the phone is in standby mode, press back/hold/intercom. Select the handset or base you want to page. If you select #NN, all other handsets will be paged. If the handset or base you're trying to page is busy, the phone displays 5[UVGODWU[. If the handset you're trying to page is out of range, the phone displays 0Q5KIPCN. The page is canceled.Answering an intercom page When the handset receives an intercom page, it sounds a tone and shows the ID of the handset that is paging. To answer the page, pick up the handset and press talk/flash, speaker, or back/hold/intercom on the handset, or back/hold/intercom on the base. To hang up an intercom page, press end on either handset.Transferring a Call You can transfer a call from one handset or the base to another. During a call, press back/hold/intercom; this will put the call on hold. Select the handset or base you want to page. If you select#NN, all other handsets and base will be paged. To cancel the page and go back to the caller, press talk /flash or on the base.+PVGTEQO/1$+.'/1$+.'.#0&.#0&*CPFUGV*CPFUGV*CPFUGV$CUG#NN*QNF6TCPUHGT/1$+.'/1$+.'.#0&.#0&*CPFUGV*CPFUGV*CPFUGV$CUG#NN•If you receive an outside/intercom call or page while selecting the other handset, the operation is canceled.•If the party does not answer within one minute, the operation is canceled.•During an intercom call, if you receive a call, you will hear a ringer tone from the ear speaker.•If all handsets are paged, only the first party to answer the page will connect. •If you do not select a handset within ten seconds, the operation will be canceled.noteUP744.book Page 86 Friday, November 5, 2004 4:22 PM
Multi-Handset Features[87] Multi-Handset Featureswww.uniden.comAnswering a transfer page When the handset receives a transfer page, it sounds a tone and shows the ID of the handset that is paging. Pick up the handset and press talk/flash or or back/hold/intercom to answer the page. If you want to accept the transfer and talk to the outside caller, press talk/flash or back/hold/intercom on the handset, or or back/hold/intercom on the base.UP744.book Page 87 Friday, November 5, 2004 4:22 PM
Note on Power SourcesNote on Power Sources [ 88]www.uniden.comNote on Power SourcesPower FailureThe phone use the backup battery in the Base. It provides power backup in the event of a power failure or outage. You will be able to make or receive calls with the telephone.Battery replacement and handlingWhen the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, your battery should last about one year.WarningTo avoid the risk of personal injury or property damage from fire or electrical shock, use only Uniden AD-0009 AC adapters and Uniden BT-0002 battery back with your phone.Caution•Use only the specified Uniden battery pack (BT-0002 and BT-446).•Do not remove the batteries from the handset to charge them.•Never throw the battery into a fire, disassemble them, or heat them.•Do not remove or damage the battery casing.•A replacement Uniden adapter or battery may be purchased by calling the Customer Hotline at 1-800-297-1023 (Mon - Fri 7 am to 7 pm, Sat/Sun/holidays--except Thanskgiving and Christmas--9 am to 5 pm, CST). •Use only the Uniden (BT-0002 and BT446) rechargeable battery pack supplied with your cordless phone.noteUP744.book Page 88 Friday, November 5, 2004 4:22 PM
General Information[89 ] General Informationwww.uniden.comGeneral InformationThe phone complies with FCC Parts 15 and 68. Operating temperature: 0 °C to +50 °C (+32 °F to +122 °F)AC Adapter InformationAC Adapter part number: AD-0009Input Voltage: 120V AC 60HzOutput Voltage: 9V DC 600mABattery InformationBattery part number: BT-0002 (Handset) BT-446 (Base)Capacity: 980mAh, 3.7V 800mAh, 3.6VSpecifications, features, and availability of optional accessories are all subject to change without prior notice.UP744.book Page 89 Friday, November 5, 2004 4:22 PM
TroubleshootingTroubleshooting [90]www.uniden.comTroubleshootingIf your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline at 1-800-297-1023 (Mon - Fri 7 am to 7 pm, Sat/Sun/holidays [except U.S. Thanksgiving and Christmas] 9 am to 5 pm, CST). Symptom SuggestionThe charge LED won't illuminate when the handset is placed in the cradle.• Make sure the AC adapter is plugged into the base or the charger (if you have more than one handset) and wall outlet.• Make sure the handset is properly seated in the cradle.• Make sure the charging contacts on the handset are clean.The audio sounds weak. • Move the handset and/or base away from metal objects or appliances and try again.• Make sure that you are not too far from the base.Can't make or receive calls.• Make sure that you are not too far from the base.• Make sure the line is not in use. If an out call is already using a line, you cannot use that line to make another outside call.• Check both ends of the base telephone line cord.• Make sure the AC adapter is plugged into the base and wall outlet.• Disconnect the AC adapter and the backup battery.• Change the Digital Security Code (see page 16).The handset doesn't ring or receive a page.• Make sure that you are not too far from the base.• Charge the batteries in the handset for 10 hours by placing the handset on the base or charging cradle.• Change the Digital Security Code (see page 16).Severe noise interference.• Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances.• Move to another location or turn off the source of interference.UP744.book Page 90 Friday, November 5, 2004 4:22 PM
[91] Troubleshootingwww.uniden.comThe Caller ID does not display.• The call was placed through a switchboard.• Call your local telephone company to verify your Caller ID service is current. There may be a problem with your Caller ID service.You cannot register the handset at the base.• Charge the battery pack for 15-20 hours.• Change the Digital Security Code (see page 16).The handset doesn't communicate with other handsets.• Change the Digital Security Code (see page 16). • Make sure that you have registered all handsets.An extra handset can't join the conversation.• Make sure there are not 2 handsets already using the conference feature.• Make sure that another handset is not in privacy mode.Room Monitor feature does not work. • Make sure to place the handset(s) within the range of the base.The answering machine does not work.•Make sure the base unit is plugged in.•Make sure that the answering machine is turned on.•Make sure that the message record time is not set to Announce only (see page 74).Messages are incomplete. •The incoming messages may be too long. Remind callers to leave a brief message.•The memory maybe full. Delete some or all of the saved message.No sound on the base unit or handset speaker during call monitoring or message playback.•Adjust the speaker volume on the base unit or handset.•Make sure the call screen feature is set to on.Symptom SuggestionUP744.book Page 91 Friday, November 5, 2004 4:22 PM
TroubleshootingTroubleshooting [92]www.uniden.comSystem ResetDe-register the Handset1) Press and hold end and # for more than 5 seconds. Select &GTGIKUVGT*5.2) The phone will ask you to confirm the deregistration. Select ;GU.Replacing the Base Setting1) Press and hold end and # for more than 5 seconds. Select Replacing Base. 4GRNCEKPI$CUG appears.2) Select ;GU.3) You will hear a confirmation tone. The base information will be deleted.Cannot access remote call-in features from another touchtone phone.•Make sure you are using the correct PIN number.•Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your phone.Time stamp cannot be heard. •Make sure you have set the time (see "Setting Day and Time" on page 29).Symptom Suggestion5[UVGO4GUGV &GTGIKUVGT*54GRNCEKPI$CUG5'.'%65'.'%65[UVGO4GUGV &GTGIKUVGT*54GRNCEKPI$CUG5'.'%65'.'%6UP744.book Page 92 Friday, November 5, 2004 4:22 PM
[93] Troubleshootingwww.uniden.comWhen the base information is deleted, the handset displays /756RNCEGVJGJCPFUGVKPDCUGVQTGIKUVGT/QFGNUOC[XCT[TGHGTVQQYPGTUOCPWCNHQTIWKFCPEG. Re-register the handset to the base (see page 14).4GRNCEKPIDCUG;GU0Q5'.'%65'.'%6UP744.book Page 93 Friday, November 5, 2004 4:22 PM
Liquid DamageLiquid Damage [94]www.uniden.comLiquid DamageMoisture and liquid can damage your cordless phone. Follow the steps below if your phone gets wet:Case ActionIf the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected.Wipe off the liquid, and use as normal.If moisture or liquid has entered the plastic-housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base).Handset:1) Remove the battery cover and leave it off for ventilation.2) Disconnect the battery pack. Leave the battery cover off and the battery pack disconnected for at least 3 days.3) Once the handset is completely dry, reconnect the battery pack and the battery cover.4) Recharge the handset's battery pack for 20 hours before using.Base:1) Disconnect the AC adapter from the base, cutting off electrical power.2) Disconnect the telephone cord from the base.3) Let dry for at least 3 days.IMPORTANT: You must unplug the telephone line while recharging the battery packs to avoid charge interruption.CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline at 1-800-297-1023.UP744.book Page 94 Friday, November 5, 2004 4:22 PM
[95] Precautions & Warrantywww.uniden.comPrecautions!Before you read anything else, please observe the following:Warning!Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.Rechargeable Lithium Ion and Nickel-Metal-Hydride Battery Warning• This equipment contains rechargeable Lithium Ion Nickel-Metal-Hydride battery.• The rechargeable batteries contained in this equipment may explode if disposed of in a fire.• Nickel is a chemical known to state of California to cause cancer.• Do not short-circuit the battery.• Do not charge the rechargeable battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owner's manual. Using another charger may damage the battery or cause the battery to explode.Rechargeable Batteries Must Be Recycled or Disposed of ProperlyThe exclamation point within an equilateral is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.Uniden works to reduce lead content in our PVC coated cords in our products and accessories.Warning!The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.Important Safety InstructionsWhen using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible battery disposal instructions. 5. Do not disassemble any component of this product.SAVE THESE INSTRUCTIONS CAUTIONRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not open or mutilate the battery, and disconnect the battery before shipping this product.The FCC Wants You To KnowThis equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.Please follow instructions for repairing, if any (e.g. battery replacement section); otherwise do not substitute or repair any parts of the device except as specified in this manual.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.This equipment is hearing aid compatible.Should you experience trouble with this equipment, please contact Uniden customer service at 800-297-1023. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor is recommended.Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications, may not be ensured when using this phone.To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC’s exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.Radio InterferenceRadio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the base not be plugged into a circuit that also powers a major appliance because of the potential for interference. Be certain that the antenna on the unit is fully extended when needed.In the unlikely event that you consistently hear other voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or other source of interference. If you cannot eliminate this type of interference, you need to change to a different channel.Precautions & UP744.book Page 95 Friday, November 5, 2004 4:22 PM
Precautions & WarrantyPrecautions & Warranty [96]www.uniden.comFinally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.Cordless Telephone PrivacyCordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways.Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telephone unit. Consequently, any communications using your cordless telephone may not be private.One Year Limited WarrantyImportant: Evidence of original purchase is required for warranty service.WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product.STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada.PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner's manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Disconnect the battery from the Product and separately secure the battery in its own separate packaging within the shipping carton. The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America CorporationParts and Service Division4700 Amon Carter Blvd.Fort Worth, TX 76155(800) 297-1023, 7:00 a.m. to 7:00 p.m. Monday through Friday; 9:00 a.m. through 5:00 p.m., Saturday, Sunday and Holidays (except Thanksgiving and Christmas); all Central Time,UP744.book Page 96 Friday, November 5, 2004 4:22 PM
[97] I.C. Noticewww.uniden.comI.C. NoticeTERMINAL EQUIPMENTNOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.RADIO EQUIPMENTThe term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone".UP744.book Page 97 Friday, November 5, 2004 4:22 PM
INDEX [98]www.uniden.comIndexAAnimations. . . . . . . . . . . . . . . . . 38Answering MachineAnswering Mode. . . . . . . . . . . . 72Call screen . . . . . . . . . . . . . . . 75Message alert . . . . . . . . . . . . . 75Security code . . . . . . . . . . . . . 73Setting up menu . . . . . . . . . . . 73Anykey Answer . . . . . . . . . . . . . . 27Area Code . . . . . . . . . . . . . . . . . 30Audio Tone. . . . . . . . . . . . . . . . . 58BBacklight Color . . . . . . . . . . . . . . 37BatteryReplacement . . . . . . . . . . . . . . . 9CCalendar . . . . . . . . . . . . . . . . . . 61Call screen . . . . . . . . . . . . . . . . . 75Call transfer feature. . . . . . . . . . . 86Caller IDCall Waiting . . . . . . . . . . . . . . 51CIDCW . . . . . . . . . . . . . . . . . . 70CWDX . . . . . . . . . . . . . . . . . . . 51Conference. . . . . . . . . . . . . . . . . 52Customize Handset . . . . . . . . . . . 31DDate & time . . . . . . . . . . . . . . . . 29Delete ringer . . . . . . . . . . . . . . . 36De-register the Handset . . . . . . . . 92Dial mode . . . . . . . . . . . . . . . . . 31Digital security code . . . . . . . . . . 16DirectLink. . . . . . . . . . . . . . . . . . 84Distinctive ID . . . . . . . . . . . . . . . 33EEarpiece volume. . . . . . . . . . . . . . 56Expanding your phone . . . . . . . . . 13FFind handset . . . . . . . . . . . . . . . . 60GGeneral information . . . . . . . . . . . 89Global set . . . . . . . . . . . . . . . . . . 29HHandset setup . . . . . . . . . . . . . . . 25Hands-free conversation . . . . . . . . 48Hanging up. . . . . . . . . . . . . . . . . 50Headset installation . . . . . . . . . . . 17Hold . . . . . . . . . . . . . . . . . . . . . 52Holster. . . . . . . . . . . . . . . . . . . . 16II.C. notice . . . . . . . . . . . . . . . . . 97Important safety instructions. . . . . 95Intercom . . . . . . . . . . . . . . . . . . 86KKey touch tone . . . . . . . . . . . . . . 27LLanguage . . . . . . . . . . . . .26, 38, 75LCD contrast . . . . . . . . . . . . . . . . 26Link handsets . . . . . . . . . . . . 84, 85Liquid damage. . . . . . . . . . . . . . . 94Low battery . . . . . . . . . . . . . . . . 10MMaking a call . . . . . . . . . . . . . . . .47Message Alert. . . . . . . . . . . . . . . .75MuteHandset ringer . . . . . . . . . . . . .59Microphone . . . . . . . . . . . . . . .59OOut going greeting . . . . . . . . . . . .76Choosing . . . . . . . . . . . . . . . . .76Recording. . . . . . . . . . . . . . . . .76Out of range . . . . . . . . . . . . . . . .50PPhonebookCapacity. . . . . . . . . . . . . . . . . .67Copying entries . . . . . . . . . . . . .66Group . . . . . . . . . . . . . . . . . . .65Making calls . . . . . . . . . . . . . . .68Name. . . . . . . . . . . . . . . . . . . .64Number . . . . . . . . . . . . . . . . . .64Sort order. . . . . . . . . . . . . . . . .68Speed dial . . . . . . . . . . . . . . . .65Unique display . . . . . . . . . . . . .65Unique ring . . . . . . . . . . . . . . .64Power failure . . . . . . . . . . . . . . . .88Precautions . . . . . . . . . . . . . . . . .95Privacy mode . . . . . . . . . . . . . . . .26RReceiving a call . . . . . . . . . . . . . .49Record ringer . . . . . . . . . . . . . . . .34Record Time. . . . . . . . . . . . . . . . .74Recording conversation . . . . . . . . .80Redialing a call . . . . . . . . . . . . . .55UP744.book Page 98 Friday, November 5, 2004 4:22 PM
[99] INDEXwww.uniden.comRegister the handset . . . . . . . . . . 14Reminder . . . . . . . . . . . . . . . . . . 61Remote operation . . . . . . . . . . . . 82Reviewing message . . . . . . . . . . . 78Ring options. . . . . . . . . . . . . . . . 32Ring time. . . . . . . . . . . . . . . . . . 74Ringer tone . . . . . . . . . . . . . . . . 32Ringer volumeBase . . . . . . . . . . . . . . . . . . . 56Handset . . . . . . . . . . . . . . . . . 57Room/baby monitor. . . . . . . . . . . 85SSetting upAnswering Machine. . . . . . . . . . 73base unit . . . . . . . . . . . . . . . . 11Telephone Line . . . . . . . . . . . . 11Soft Key. . . . . . . . . . . . . . . . . . . 21Speaker phone . . . . . . . . . . . . . . 48Speaker volumeBase . . . . . . . . . . . . . . . . . . . 56Handset . . . . . . . . . . . . . . . . . 58Storing a caller ID or redial number 66System Setup . . . . . . . . . . . . . . . 25TTone dial . . . . . . . . . . . . . . . . . . 59Transferring a call . . . . . . . . . . . . 86Troubleshooting . . . . . . . . . . . . . 90WWarranty . . . . . . . . . . . . . . . . . . 96UP744.book Page 99 Friday, November 5, 2004 4:22 PM
[100]www.uniden.comMemoUP744.book Page 100 Friday, November 5, 2004 4:22 PM
[101]www.uniden.comMemoUP744.book Page 101 Friday, November 5, 2004 4:22 PM
Remote Operation Card [102]www.uniden.comRemote Operation CardRemote Operation CardCUTREMOTEOPERATIONCARDRemote access away from home1. Call your phone number from a touch-tone phone.2. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts.3. To quit, hang up the phone.Turn on the answering system remotely1. Call your phone and let it ring 10 times until you hear a beep.2. Press 0 and then enter yourPIN code.3. Press 0 then 5 to stopthe announcement.4. Press 0 then 6 to turn the answering system on.CUTREMOTEOPERATIONCARDRemote access away from home1. Call your phone number from a touch-tone phone.2. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts.3. To quit, hang up the phone.Turn on the answering system remotely1. Call your phone and let it ring 10 times until you hear a beep.2. Press 0 and then enter yourPIN code.3. Press 0 then 5 to stopthe announcement.4. Press 0 then 6 to turn the answering system on.CUTREMOTEOPERATIONCARDRemote access away from home1. Call your phone number from a touch-tone phone.2. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts.3. To quit, hang up the phone.Turn on the answering system remotely1. Call your phone and let it ring 10 times until you hear a beep.2. Press 0 and then enter yourPIN code.3. Press 0 then 5 to stopthe announcement.4. Press 0 then 6 to turn the answering system on.CUTREMOTEOPERATIONCARDRemote access away from home1. Call your phone number from a touch-tone phone.2. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts.3. To quit, hang up the phone.Turn on the answering system remotely1. Call your phone and let it ring 10 times until you hear a beep.2. Press 0 and then enter yourPIN code.3. Press 0 then 5 to stopthe announcement.4. Press 0 then 6 to turn the answering system on.UP744.book Page 102 Friday, November 5, 2004 4:22 PM
[103] Remote Operation Cardwww.uniden.comCUTTask KeyRepeat a MessagePlaying incoming MessagesSkipping a MessageDeleting a MessageStop OperationAnswering System OnMemo Record/StopGreeting Message Record/StopAnswer System OffHelp GuidanceCUTTask KeyRepeat a MessagePlaying incoming MessagesSkipping a MessageDeleting a MessageStop OperationAnswering System OnMemo Record/StopGreeting Message Record/StopAnswer System OffHelp GuidanceCUTTask KeyRepeat a MessagePlaying incoming MessagesSkipping a MessageDeleting a MessageStop OperationAnswering System OnMemo Record/StopGreeting Message Record/StopAnswer System OffHelp GuidanceCUTTask KeyRepeat a MessagePlaying incoming MessagesSkipping a MessageDeleting a MessageStop OperationAnswering System OnMemo Record/StopGreeting Message Record/StopAnswer System OffHelp GuidanceUP744.book Page 103 Friday, November 5, 2004 4:22 PM
At Uniden, we'll take care of you!Thank you for purchasing a Uniden product. If you have any questions or problems,please do not return this product to the place of purchase.Having Trouble?Our customer care specialists are here to help you! Call our Customer Hotline at 1-800-297-1023 Mon - Fri 7 am to 7 pm, Sat/Sun/holidays (except U.S. Thanksgiving and Christmas). 9 am to 5 pm, CST, or visit our website at www.uniden.com.Need a part?To order headsets, additional handsets, replacement batteries or other accessories, call our customer care specialists at the number listed above.Mon - Fri 8 am to 5pm, CST or visit our website at www.uniden.com.Help for our Special Needs CustomersIf you need special assistance due to a disability or have questions on the accessibility features of this product, please call 1-800-874-9314 (voice or TTY)May be covered under one or more of the following U.S. patents:4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,9055,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,7905,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,3125,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,1525,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,2275,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,0826,125,277 6,253,088 6,314,278 6,418,209 6,618,015 6,671,3156,714,630UP744.book Page 104 Friday, November 5, 2004 4:22 PM
UPZZ01744BZTHANK YOU FOR BUYING A UNIDEN PRODUCT.©2004 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China. REGISTER ONLINE TODAY!FORACCESSORIES,GO ONLINE @WWW.UNIDEN.COM

Navigation menu