Uniden America UC358R Cordless Telephone System - Handset User Manual EXI2246

Uniden America Corporation Cordless Telephone System - Handset EXI2246

users manual

EXI2246EXI2246 12/25/1 9:33 AM Page 1
www.uniden.comEXI2246 12/25/1 9:33 AM Page 2
ContentsWelcome/Features 2Quick Reference Guide 3Controls and Functions 4Getting StartedRead this First 6Checking the Package Contents 7Setting up the Phone 8Mounting the Base Unit on a Wall 12Terminology 13Setting Menu Options 14BasicsMaking and Receiving Calls 17Adjusting the Handset Ringer and Earpiece Volume 18Redial 19Tone Dialing Switch-over 19Traveling Out-of-Range 19Selecting a Different Channel 20Page 20Flash and Call Waiting 20Memory DialingStoring Phone Numbers and Names 21Steps for Entering Names and Special Characters 23Making Calls with Memory Dialing 25Chain Dialing 26Editing a Stored Name and/or Phone Number 27Erasing a Stored Name and Phone Number 29RocketDialRocketDial 30Storing and Editing the RocketDial 30Making Calls with the RocketDial 30Deleting the RocketDial 31Caller ID FeaturesCaller ID 32When the Telephone Rings 32Viewing the Caller ID Message List 33Deleting Information from the Caller ID List 34Using the Caller ID List 36Additional InformationChanging the Digital Security Code 38Installing the Beltclip 38Headset Installation 38Note on Power Sources 39Maintenance 39Troubleshooting 40General Information 42Precautions & Warranty 43I.C. Notice 45Index 46EXI2246 12/25/1 9:33 AM Page 1
[ 2 ]Welcome Congratulations on your purchase of the Uniden EXI2246 cordless telephone. This phoneis designed and engineered to exacting standards for reliability, long life, and outstand-ing performance.Note: Some illustrations in this manual may differ from the actual unit for explanation purpose.The EXI2246 features include AutoTalkTM and AutoStandbyTM. AutoTalk allows you toanswer a call by just removing the handset from the base so you don't have to waste time pushing buttons or flipping switches. AutoStandby allows you to hang up by simplyreturning the handset to the base.The UltraClear PlusTM true compander circuitry virtually eliminates background noise. Thisinnovative technology, together with 20 different channels, provides you with the bestpossible reception during all your conversations.To protect you against misbilled calls which might result from your phone being activatedby other equipment, the EXI2246 has Random CodeTM digital security which automaticallyselects one of approx. 260,000 digital security codes for the handset and base. Also, theAutoSecureTM feature electronically locks your phone when the handset is in the base.RocketDialTM is a one touch speed dial key that automatically dials your most importantor frequently called number. The number dialed, is a preset number stored by the user.Be sure to visit our web site: www.uniden.comFeatures • 2.4 GHz Extended Range Technology• 3 Line Backlit Display• Caller ID and Call Waiting Caller ID• RocketDial• 10 Number Memory Dialing• The Keypad Facing Up/Down Charging• 32 Digit Redial• Flash and Pause• English or French Display Option• Tone/Pulse Dialing• Page/Find handset• 7 Hour Talk Time/14 Day Standby Time• Handset Earpiece and Ringer VolumeControl• Hearing Aid Compatible• 20 Channel AutoscanUniden®is a registered trademark of Uniden America Corporation.AutoTalk, AutoStandby, UltraClear Plus, Random Code, AutoSecure, and RocketDial are trademarks ofUniden America Corporation.As ENERGY STAR®Partner, Uniden has determined that this product orproduct models meets the ENERGY STAR®guide lines for energy efficiency.ENERGY STAR®is a U.S. registered mark.EXI2246 12/25/1 9:33 AM Page 2
QUICK REFERENCE GUIDE [ 3]Step 1 Charging the BatteryTO INSTALL THE HANDSET BATTERY CONNECT TO A PHONE LINEWhen the handset battery pack is fully charged,after 15-20 hours of charging, plug the telephonecord into the base unit and then into a telephonewall jack. Your phone is set for tone dialing. If your localnetwork requires pulse dialing, please see “Choosethe dialing mode” on page 15.1Remove the cover.TO CHANGE CALLER ID OPTIONS1Press and hold cid/menu.2Press or to move the pointer to anoption.3Press select to change the option setting.4Press end and return the handset to thebase.TO CHOOSE THE LANGUAGE1Press and hold cid/menu.2Press or to move the pointer toLanguage.3Press select to select Eng (English) orFr. (French).4Press end and return the handset to thebase.1Plug AC adapter cord into the base unitand then into a 120V AC outlet.2Place the handset on the base.2Connect the battery packconnector with the correct polarity.3Replace the cover.TO PLUG INTO AC POWERNote: You must charge the battery continuously for15 - 20 hours before using the phone.Note: Three Caller ID options are available: AutoTalk,Caller ID on Call Waiting (CIDCW), and Area Code. QUICK REFERENCE GUIDEStep 2 Connecting Step 3Setting Up the Caller ID/LanguageEXI2246 12/25/1 9:33 AM Page 3
CONTROLS AND FUNCTIONS[ 4 ]23415768911201615141310121918171. Handset antenna2. Beltclip holes3. Optional headset jack4. Handset battery compartment5. Handset earpiece6. LCD display7. Caller ID/menu key8. Talk flash key9. */tone/left cursor ( ) key10. Redial/pause (p) key11. Select key12. Handset microphone and ringer speaker13. Volume up ( ) key14. RocketDial key15. End key16. Volume down ( ) key17. #/right cursor ( ) key18. Memory key19. Delete/channel (ch) key20. Handset charging contactsControls and FunctionsEXI2246 12/25/1 9:33 AM Page 4
212224 252321. Status LED22. Find handset key23. Base charging contacts24. DC IN 9V jack25. Telephone line jackCONTROLS AND FUNCTIONS [ 5]EXI2246 12/25/1 9:33 AM Page 5
GETTING STARTED[ 6 ]Read this FirstThis cordless telephone must be set up before use. Follow these steps:About the digital security codeThis cordless telephone uses adigital security code to preventunauthorized access to your baseunit. This security code preventsother cordless handset from making calls through your baseunit.A random security code will beassigned automatically betweenyour base unit and handset whenyou charge the battery pack forthe first time.If you want to reset the securitycode, see page 38.Step 1 (page 7)Unpack the telephone and accessories.Step 2 (page 8)Next, choose the best location toset up the base unit.Step 3 (page 9 to 11)Then, insert the battery pack intothe handset. Connect the base unit.You must charge the battery packfor 15-20 hours before plugginginto the telephone line and usingthe phone.EXI2246 12/25/1 9:33 AM Page 6
GETTING STARTEDGETTING STARTED [ 7]Checking the Package ContentsUniden Parts Department at (800) 554-3988Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also bereached on the web at www.uniden.comMake sure you have received the following items in the package. If any of theseitems are missing or damaged, contact the Uniden Parts Department.• Base unit• Handset• AC adapter• Rechargeable battery• Telephone cord• Beltclip• This Owner’s ManualEXI2246 12/25/1 9:33 AM Page 7
GETTING STARTED[ 8 ]Setting up the PhoneDo the following steps:A. Choose the best location C. Connect the base unitB. Install the battery packA. Choose the best locationBefore choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONSbrochure. Here are some important guidelines you should consider:•The location should be close to both a phone jack and a continuous power outletwhich is not switchable.•Keep the base and handset away from sources of electrical noise such as motors,microwave ovens, and fluorescent lighting.•Be sure there is sufficient space to raise the base antenna to a vertical position.•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, orshockAvoid heat sources, such as radiators,air ducts, and sunlightAvoid television sets and otherelectronic equipmentAvoid noise sources such as a window by astreet with heavy trafficAvoid microwave ovensAvoid personal computersAvoid other cordless telephonesChoose a central locationEXI2246 12/25/1 9:33 AM Page 8
GETTING STARTEDGETTING STARTED [ 9]B. Install the battery packCharge the battery pack for at least 15-20 hoursbefore plugging the phone line into your phone.1) Press in on the battery cover release and slide the coverdown until it comes off.2) Connect the battery pack connector observing correctpolarity (black and red wires) to the jack inside the battery compartment. Do not exert any force on this connection. It could causedamage to the battery or to the handset. The plastic connectors will fit together in only one way. Once you are certain that you have made a good connection, then insert the battery pack into the batterycompartment. Do not pinch the wires.3) Securely close the battery compartment cover by slidingit up until it snaps into place.4) Place the handset on the base.Use only the Unidenbattery (BT-905) supplied with yourphone. Replacement batteries are also available through theUniden PartsDepartment.(See page 7.)EXI2246 12/25/1 9:33 AM Page 9
GETTING STARTED[ 10 ]Even when the battery pack is notbeing used, it will grad-ually discharge over along period of time. Foroptimum performance,be sure to return thehandset to the base unitafter a telephone call.Battery use time (per charge)From fully charged (15-20 hours charge time)• Seven hours continuous use• Fourteen days when the handset is in the standby modeLow Battery AlertWhen the battery pack is very low and needs to becharged, the phone is programmed to eliminate functionsin order to save power. If the phone is not in use, ¨Low Battery¨ appears on the LCD and none of the keyswill operate. If the phone is in use, ¨Low Battery¨ flashes and thehandset beeps. Complete your conversation as quickly aspossible and return the handset to the base unit for charging.Cleaning the Battery Charging ContactsTo maintain a good charge, it is important to clean thebattery contacts on the handset and base unit with adry cloth or a pencil eraser about once a month.Do not use any liquids or solvents.The last number dialed in the redial memory, the namesand the numbers stored in the memory locations areretained for up to 30 minutes while you replace the battery pack.EXI2246 12/25/1 9:33 AM Page 10
GETTING STARTEDGETTING STARTED [ 11]• Use only the supplied AD-310 AC adapter. Do not use any other AC adapter.• Connect the AC adapter to a continuous power supply.• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.C. Connect the base unit1) Connect the AC adapter to the DC IN 9V jackand to a standard 120V AC wall outlet.2) Set the base on a desk or tabletop, and place the handset on the base unit.3) Make sure that the status LED illuminates. Ifthe LED does not illuminate, check to seethat the AC adapter is plugged in and that the handset makes good contact withthe base charging contacts.Place the handset inthe base with thekeypad facing forwardfor charging.Place the power cord sothat it does not create atrip hazard or where itcould become chafedand create a fire orelectrical hazard.•After installing the battery pack in the handset, charge your handset at least 15-20hours before plugging into the phone line. Once the handset battery pack is fullycharged, connect the telephone line cord to the base and telephone wall outlet.4) Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged.ModularIf your telephone outlet isn't modular,contact your telephone company for assistance.EXI2246 12/25/1 9:33 AM Page 11
GETTING STARTED[ 12 ]Mounting the Base Unit on a WallStandard wall plate mountingThis phone can be mounted on any standard wall plate.1) Plug the AC adapter into the DC IN 9V jack.2) Wrap the AC adapter cord inside the moldedwiring channel as shown.3) Plug the AC adapter into a standard 120V AC wall outlet.4) Plug the telephone line cord into the TEL LINEjack. Wrap the cord inside the molded wiringchannel as shown.5) Plug the telephone line cord into the telephoneoutlet.6) Raise the antenna to a vertical position.7) Align the mounting slots on the base with the mounting posts on the wall. Thenpush in and down until the phone is firmly seated.DO NOT use an AC outletcontrolled by a wallswitch.EXI2246 12/25/1 9:33 AM Page 12
GETTING STARTEDGETTING STARTED [ 13]Direct wall mountingIf you don't have a standard wall plate, you can mount your phone directly to thewall. Before doing this, consider the following:•Avoid electrical cables, pipes, or other items behind the mounting location thatcould cause a hazard when inserting screws into the wall.•Try to mount your phone within 5 feet of a working phone jack to avoid excessivelengths.•Make sure the wall material is capable of supporting the weight of the base and handset.•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitablefor the wall material where the base unit will be placed.1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allowabout 1/8 of an inch between the wall and screw heads formounting the phone.2) Refer to steps 1 through 6 on pages 12 to mount the telephone.TerminologyThroughout this manual, terms such as Standby and Talk Mode are used. Below is theterminology explanation.•Standby Mode - The handset is not in use, off the base, and talk/flash has notbeen pressed. A dial tone is not present.•Talk Mode - The handset is off the base and talk/flash has been pressed enablinga dial tone.EXI2246 12/25/1 9:33 AM Page 13
GETTING STARTED[ 14 ]Setting Menu OptionsThere are five setup options available. They are Caller ID options [AutoTalk, CIDCW(Caller ID on Call Waiting), Area Code], Dial Mode and Language.AutoTalk allows you to answer the phone without pressing the talk/flash button. Ifthe phone rings when AutoTalk is on, simply remove the handset from the base andthe phone automatically answers the call. Or if the handset is not on the base, pressany key to answer the call. If the phone rings when AutoTalk is off, you must presstalk/flash to answer the call. Caller ID optionsTo change your AutoTalk and CIDCW:1) Press and hold call id/menu. The following screen appears.2) Use and or a number key (1 and 2) to move the pointerto the selection that you would like to change.Press select to toggle between ¨On¨ and ¨Off¨ for AutoTalk and CIDCW.3) Press end to complete the setting. Or return the handset to the base unit tocomplete the setting. The handset returns to the standby mode.To enter your Area CodeIf you enter a 3-digit area code number in the Area Code option, your local areacode does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number.For calls received from outside your local area code, you will see a full 10-digit number.If your calling arearequires 10-digit dialing, do not programthis option.EXI2246 12/25/1 9:33 AM Page 14
GETTING STARTEDGETTING STARTED [ 15]1) When the phone is in the standby mode, press and hold call id/menu. The Caller ID setting screen appears.2) Press 3or press twice to select ¨Area Code¨.3) Press select.4) Use the number keys (0 to 9), #/ , */tone/ ordelete/ch to enter the 3-digit area code.5) Press select. A confirmation tone sounds and the displayed area code is entered.6) Press end to complete the setting. Or return the handset to the base unit tocomplete the setting. The handset returns to the standby mode.When the area code has already been stored in memory, thestored area code will be displayed. To change it, use thedelete/ch and number keys to enter the new area code. Thenpress select. A confirmation tone sounds.To complete the setting, press end or return the handset to thebase unit.Choosing the dialing modeMost phone systems use tone dialing which sends DTMF tones through the phonelines. However some phone systems still use pulse dialing such as in rural areas. Thedefault setting is tone dialing. Depending on your dialing system, set the mode asfollows:Make sure your batterypack is fully chargedbefore choosing the dial mode.EXI2246 12/25/1 9:33 AM Page 15
GETTING STARTED[ 16 ]1) When the phone is in the standby mode, press and hold call id/menu. The following screen appears.2) Press 4or press three times to select ¨Dial¨.3) Press select to toggle between ¨Tone¨ and ¨Pulse¨ for each setting.4) Press end to complete the setting. Or return the handset to the base unit tocomplete the setting. The handset returns to the standby mode.•If you are not sure of your dialing system, set for tone dialing. Make a trial call. Ifthe call connects, leave the setting as is, otherwise set for pulse dialing.•If your phone system requires pulse dialing and you need to send the DTMF tones forcertain situations during a call, you may "switch-over" to tone dialing. (Refer to"Tone Dialing Switch-over" on page 19.)Setting the Language1) When the phone is in the standby mode, Press and hold call id/menu. The following screen appears.2) Press 5or press four times to select ¨Language¨.3) Press select to toggle between ¨Eng¨ and ¨Fr.¨ for eachsetting.4) Press end to complete the setting. Or return the handset to the base unit tocomplete the setting. The handset returns to the standby mode.EXI2246 12/25/1 9:33 AM Page 16
BASICSBASICS [ 17]Making and Receiving CallsPick up the handset (AutoTalk)or pick up the handset and presstalk/flash.1) Pick up the handset.2) Press talk/flash.3) Listen for the dial tone.4) Dial the number.OR1) Pick up the handset.2) Dial the number, then presstalk/flash.Press end, or return the handset tothe base (AutoStandby).1) Pick up the handset.2) Press talk/flash.3) Listen for the dial tone.4) Press redial/p.OR1) Pick up the handset.2) Press redial/P, then presstalk/flash.Handset On Base Handset Off BaseTo answera callTo makea callTo hang upTo redialPress talk/flash, any number,*/tone or #/ .1) Press talk/flash.2) Listen for the dial tone.3) Dial the number.ORDial the number, then presstalk/flash.Press end.1) Press talk/flash.2) Listen for the dial tone.3) Press redial/p.ORPress redial/P, then presstalk/flash.Refer to page 14"Setting Menu Options"to turn on the AutoTalkfeature if desired.EXI2246 12/25/1 9:33 AM Page 17
BASICS[ 18 ]Adjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volumePress or in standby mode to select one of five ringertones and volume combinations.Earpiece volumePressing or during a call will change the earpiece volumeof the handset. This setting will remain in effect after the telephone call has ended.Ringer MuteYou can temporarily mute the ringer tone. When the handset is off the base and thephone is ringing, press end. The ringer tone will return to normal starting with thenext incoming call.When you press in Maximum mode or in Low mode, an errortone sounds.Ring Type A HighRing Type A LowRing Type B HighRing Type B LowRinger OffEXI2246 12/25/1 9:33 AM Page 18
BASICSBASICS [ 19]RedialThe redial/p key redials the last number dialed. The redialed number can be up to 32digits long.Tone Dialing Switch-overSome telephone companies use equipment that requirespulse dialing (sometimes referred to as rotary dialing). Ifyou need to enter tone dialing digits, you can switch-overto tone dialing during the call. For example, entering yourbank account number after you have called your bank. Initially make your call with the pulse dialing mode. Once your call connects, press*/tone/ . Enter the desired number. These digits will be sent as tone dialing.Once the call ends, the tone mode is canceled and pulse dialing mode resumes. Traveling Out-of-RangeDuring a call, as you begin to move your handset too far from your base unit, noiseincreases. If you pass the range limits of the base unit, your call will terminate within 1 minutes.• The tone feature onlyapplies when the dialmode is set to pulse.• This special numbercan be stored in amemory location. Thisis referred to as ChainDialing (See page 26.)EXI2246 12/25/1 9:33 AM Page 19
BASICS[ 20 ]Flash and Call WaitingIf you have "Call Waiting" service and a call waiting tonesounds while you are on a call, press talk/flash to acceptthe waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, presstalk/flash again.PageTo locate the handset (while it's off the base), press find handset on the base. The handset beeps for 60 seconds.Paging is canceled when pressing any key or the handset isreturned to the base.Selecting a Different ChannelIf you encounter interference while using your phone, you can manually change thephone´s channel for clear operation. This function works only when the phone is in use.Press delete/ch. ¨Scanning¨ appears on the display, indicating the phone is changing to another channel. For more information on interference, refer to"Precautions" on page 43.You can cancel pagingby pressing the findhandset key on the base.hintsYou must subscribe through your local telephone company toreceive Call Waiting Service.EXI2246 12/25/1 9:33 AM Page 20
MEMORY DIALINGMEMORY DIALING [ 21]Storing Phone Numbers and NamesMemory Dialing allows you to dial a number using just a few key presses. YourEXI2246 stores up to 10 names/numbers in the handset.1) Press and hold memory until ¨Memory Store¨ is displayed.2) Press or , or enter a number (0 - 9) to select the memory location where you would like to store the number.3) Press select. The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.If this screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select ¨Go Back¨ to choose another location.4) To enter a name (up to 14 characters), use the number keys.• See the "Steps for entering names and special characters". (See pages 23-24)• Use #/ and */tone/ to move the cursor to the desired location.• Use delete/ch to delete characters as needed.• Press and hold delete/ch to delete all the characters.• If a name is not required, go to step 5. Memory Store12 Store Name Edit Memory 1 Delete Memory 1 Go Back• In memory dialingoperation, you mustpress a key within 30seconds or the phonewill return to standby.If you return thehandset to the base,the phone will returnto standby also.• You have 30 secondsafter pressingmemory to enter thenumber you wish tostore. Otherwise, anerror tone will sound. EXI2246 12/25/1 9:33 AM Page 21
MEMORY DIALING[ 22 ]The pause feature isuseful for long distancecalling, credit card dialing, or sequencesthat require a pausebetween digits.5) Press select. ¨Store Number¨ is displayed.The cursor flashes indicating that the display is ready forthe number to be entered.6) Use the number keys to enter the phone number. The phone number cannot exceed 20 digits.Use redial/p to enter a pause in the dialing sequence. The display shows a ¨P¨. Each pause counts as one digit andrepresents a two second delay of time between the digits.Use delete/ch to delete digits as needed.7) Press select. You will hear a confirmation tone, and thefollowing screen appears. Memory storage is complete.For example, if you store a name and number into memorylocation number 7, the display shows ¨Memory 7 Stored¨.After about 2 seconds, ¨Memory Store¨ is displayed. Repeatsteps 2 - 7 to store more numbers.8) Press end to return to standby mode. Store Number8002971023 Memory 7 Stored Memory Store7 UNIDEN CORP8 <Memory 8> Store NumberEXI2246 12/25/1 9:33 AM Page 22
MEMORY DIALINGMEMORY DIALING [ 23]Steps for Entering Names and Special CharactersRefer to the letters on the number keys to select the desired characters.With each press of a numeric key, the displayed character appears in the followingorder: Upper case letters first, lower case letters next and finally the number corresponding to the key.If you make a mistake while entering a nameUse */tone/ or #/ to move the cursor to the incorrect character. Pressdelete/ch to erase the wrong character, then enter the correct character. To deleteall characters, press and hold delete/ch.Number of times key is pressedkeys 1 2 3 4 5 6 7 8 91ABCabc2DEFdef3GHIghi4JKLjkl5MNOmno6PQRSpqrs7TUVtuv8WXYZwxyz9*#-&()(blank) 02abc3def4ghi5jkl6mno7pqrs8tuv9wxyz01EXI2246 12/25/1 9:33 AM Page 23
MEMORY DIALING[ 24 ]For example, to enter Uniden;1) Pick up the handset and press and hold memory.2) Enter a number or press , to select a memory location number.3) Press select.4) Press 8twice.5) Press 6five times.6) Press 4six times.7) Press 3four times, then press #/ to more the cursor to the right.8) Press 3five times.9) Press 6five times.10) When finished, press select.To continue to store the telephone number, proceed to step 6 on page 22.If the next character uses the same number key, you must press #/ to move the cursorover. Otherwise the next time you press the number key, it changes the character thatwas previously set. EXI2246 12/25/1 9:33 AM Page 24
MEMORY DIALINGMEMORY DIALING [ 25]Making Calls with Memory DialingMemory dialing from Standby Mode1) Press memory.The handset displays your programmed memory locations.2) Press or , or enter the number (0 - 9) to select the memory location you would like to dial.3) Press talk/flash. ¨Talk¨ and the volume setting appear on the display. Then the displayed number is dialed.Display a Programmed NumberUse #/and */tone/to toggle between the names display and the numbers display.When the stored phone number has 15 or more digits, ¨\¨ isdisplayed next to the 13th digit. Press #/ to see the extradigits and */tone/ to return.1 UNIDEN CORP2 JOHN DOE3 MOM AND DAD Talk0123456789012Program name Program number1 80029710232 54529303 81755512121 UNIDEN CORP2 JOHN DOE3 MOM AND DAD5 0123456789016 01181355432907• If you press selectbefore talk/flash, youcan confirm the nameand the numberstored in the selectedmemory location.• To exit the memoryfunction without dialing, press end. The handset returns to standby.• Whenever you areusing a memory menuscreen, you mustpress a key within 30seconds or the phonewill return to standby.EXI2246 12/25/1 9:33 AM Page 25
MEMORY DIALING[ 26 ]Memory dialing from Talk Mode1) Press talk/flash. ¨Talk¨ and the volume setting appears.2) Press memory.3) Enter a number (0 - 9) to select the memory location of the desired phone number. The selected phone number is displayed. Then the number is dialed. 4) To hang up, press end.Chain DialingThe memory locations on the handset are not limited to phone numbers. You can alsostore a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.An example of this is a bank account number. Once you have called your bank, andare prompted to enter the account number, simply press memory and the location number where the special number has been stored.Store your special number with an identifying name. (Refer to "Storing PhoneNumbers and Names" on page 21.) Talk Talk Volume High Talk 0:00 Talk 0:350123456789012If you select a memorylocation that does nothave a stored number,the handset will beeprapidly and the phonewill not dial.EXI2246 12/25/1 9:33 AM Page 26
MEMORY DIALINGMEMORY DIALING [ 27]Editing a Stored Name and/or Phone Number1) Press and hold memory until ¨Memory Store¨ is displayed.2) Press or , or enter a number (0 - 9) to select thememory location you would like to edit.3) Press select.The following screen appears with the memory locationnumber that you have selected in the display.4) Press or to select ¨Edit Memory¨, then press select.The following screen appears. The cursor flashes indicatingthat the display is ready for the name to be edited. When aname has not been stored, the cursor appears at the beginning of the second line.5) Use the number keys, */tone/ , #/ , or delete/ch toedit the name. (See page 21.)To edit only the phone number, skip this step.6) Press select. The following screen appears.The cursor flashes indicating that the display is ready forthe number to be edited. Memory Store1 UNIDEN CORP2 JOHN DOE Edit Memory 2 Delete Memory 2 Go Back Store NameUNIDEN CORP Store Number8002971023 EXI2246 12/25/1 9:33 AM Page 27
MEMORY DIALING[ 28 ]7) Use the number key, redial/p or delete/ch to edit thephone number. The phone number cannot exceed 20 digits. (See page 22.)If you don´t want to change the phone number, skip this step.8) Press select. You hear a confirmation tone, and thefollowing screen appears. The memory storage is complete.For example, if you store a name and number into memorylocation number 1, the display shows ¨Memory 1 Stored¨.After about 2 seconds, ¨Memory Store¨ is displayed.9) Press end to return to standby mode. Memory 1 Stored Memory Store1 UNIDEN CORP2 JOHN DOEEXI2246 12/25/1 9:33 AM Page 28
MEMORY DIALINGMEMORY DIALING [ 29]Erasing a Stored Name and Phone Number1) Press and hold memory until ¨Memory Store¨ is displayed.2) Press or , or enter a number (0 - 9) to select thememory location you would like to erase.3) Press select.The following screen appears with the memory locationnumber that you have selected in the display.4) Press to move the pointer down to ¨Delete Memory¨.5) Press select. The following confirmation screen appears.6) Press to move the pointer to ¨Yes¨.7) Press select or delete/ch.You hear a confirmation tone, and the following screenappears.8) After about 2 seconds, the display returns to the ¨Memory Store¨ screen.You may delete the information in another memory location(return to step 2) or press end to return to standby mode. Memory Store1 UNIDEN CORP2 JOHN DOE Edit Memory 2 Delete Memory 2 Go Back Edit Memory 2 Delete Memory 2 Go BackDelete Memory 2? Yes No Memory 2 Deleted Memory Store23 MOM AND DAD Memory Store1 UNIDEN CORP2 JOHN DOEEXI2246 12/25/1 9:33 AM Page 29
ROCKETDIAL[ 30 ] Edit Number Delete Number Go Back Store Number Number StoredRocketDialYou can store your most frequently dialed number in theRocketDial location. The RocketDial allows you to dial anumber with one key press. (There is no need to press talk.The phone will automatically dial the number stored.)Storing and Editing the RocketDial1) When the phone is in the standby mode, press and holdRocketDial. Following display appears.If this screen appears, there is a number already stored.Press or to select ¨Edit Number¨, then press select.2) Store the number by following step 6 under "Storing PhoneNumbers and Names" on page 22.3) Press select.You hear a confirmation tone, and the following screenappears. Memory storage is complete.• If the RocketDial doesnot have a storednumber, the handsetwill beep rapidly andthe phone will notdial.Making Calls with the RocketDialWhen the phone is in the standby mode, simply press RocketDial. The number storedin the RocketDial memory location is instantly dialed. Store Number Store Number Store Number800• Memory locationfor the RocketDialis independentfrom the memorylocation forMemory dial.EXI2246 12/25/1 9:33 AM Page 30
ROCKETDIALROCKETDIAL [ 31]Deleting the RocketDial1) When the phone is in the standby mode, press and holdRocketDial. Following display appears.2) Press or to select ¨Delete Number¨.3) Press select. Following display appears.4) Press to move the pointer to ¨Yes¨.5) Press select or delete/ch.You hear a confirmation tone, and the following displayappears. After about 2 seconds, the handset returns tostandby mode. Edit Number Delete Number Go BackDelete Number? Yes No Number DeletedEXI2246 12/25/1 9:33 AM Page 31
CALLER ID FEATURES[ 32 ]Caller IDYou must subscribe to Caller ID service to use this feature.When the telephone rings, the Caller ID feature allows you to view the caller´s nameand phone number on the display before you answer the phone.The handset displays the phone number of the incoming call, the name, and time.Additionally, you can dial the displayed number and store the information for memory dialing.Make sure you have turned on the Caller ID/Call Waiting feature. (See page 14.)When the Telephone Rings1) When the Caller ID message is received, the display shows the caller´s phone number along with the date and time. The incoming call information is stored inthe Caller ID record. If the Caller ID service includes the caller´s name, thecaller´s name appears on the display (up to 15 letters).Here are some typical displays; 5/11 12:30PM UNIDEN CORP800-297-1023The date andtime receivedCaller's nameCaller's phone numberWhen the phone number and name data are receivedWhen a private number is receivedWhen a private name is receivedWhen invalid data is received•If you answer a callbefore the Caller IDmessage is received(Example: before thesecond ring), theCaller ID message willnot appear.•When the call isreceived via a telephone companythat does not offerCaller ID service, thecaller´s phone number and name donot appear. (This includes international calls.)•When the call is via aprivate branchexchange (PBX), thecaller´s phone number and namemay not appear.EXI2246 12/25/1 9:33 AM Page 32
CALLER ID FEATURESCALLER ID FEATURES [ 33]2) When you pick up the phone, the display changes to ¨Talk¨. (AutoTalk feature isset to on.)Viewing the Caller ID Message ListThe Caller ID list stores information for up to 30 incoming calls - even unanswered calls.1) Press cid/menu.The summary screen appears.The screen shows the number of new messages and total messages.2) Press to display the latest Caller ID message.3) Press to see the next message. Or press to see previous message.4) Press end to return to standby mode.When an unknown number is receivedWhen an unknown name is receivedData errors appear as ¨¨. New :01 Total:02 5/17 12:30PM 03UNIDEN CORP800-297-1023•In Caller ID operation,if no key is pressed formore than 30 seconds,an error tone soundsand the telephonereturns to the standby mode.•If a call comes in via atelephone system thatdoes not offer Caller IDservice, no informationis stored.•Each message can beup to 15 charactersfor the phone numberand the name.•The number of callsfrom the same CallerID appears next tothe received time.Once you read thenew message, thenumber willdisappear.EXI2246 12/25/1 9:33 AM Page 33
CALLER ID FEATURES[ 34 ]•While using the¨Delete All?¨ or¨Delete Message?¨screen if no key ispressed for more than30 seconds, an errortone sounds and thetelephone returns to standby.•If you get an incoming call or page,the deleting operationis canceled and thetelephone returns tostandby so you cananswer the call or page.Deleting Information from the Caller ID ListThe EXI2246 stores up to 30 messages. If the phone receives the 31st message, theoldest one in the list is automatically deleted. Caller ID data can also be deletedmanually.Deleting a Caller ID message1) Press call id/menu. Display the message to be deleted from the Caller ID list by pressing or .2) Press delete/ch.3) Press or to select ¨Yes¨ or ¨No¨.4) Press select or delete/ch.When the pointer is at ¨Yes¨:A tone sounds and the Caller ID message is deleted. The next Caller ID message is then displayed.When the pointer is at ¨No¨:The display returns to the Caller ID message.Deleting all Caller ID names/numbers1) Press call id/menu.2) Press delete/ch. 5/17 12:30PM 03UNIDEN CORP800-297-1023Delete Message? Yes No New :01 Total:02Delete All? Yes NoEXI2246 12/25/1 9:33 AM Page 34
CALLER ID FEATURESCALLER ID FEATURES [ 35]3) Press or to select ¨Yes¨ or ¨No¨.4) Press select or delete/ch.When the pointer is at ¨Yes¨:A tone sounds and all stored Caller ID messages are deleted.When the pointer is at ¨No¨:The display returns to the summary screen. Total:00 New :01 Total:02EXI2246 12/25/1 9:33 AM Page 35
CALLER ID FEATURES[ 36 ]Using the Caller ID ListCalling a party from the Caller ID listYou can place a call from the Caller ID list. The EXI2246 stores up to 30 messages.1) Press call id/menu. Select the phone number that you wantto dial by pressing or .2) Press talk/flash. The displayed phone number dials automatically.Long Distance calls and Area Code Setting/CancellationPressing 1while the incoming Caller ID information is displayed (in step 1) willplace the prefix “1” in the display to set up for a long distance call. Pressing 3willset or cancel an area code setting.Dial editYou can temporarily edit the Caller ID number that is displayed by pressing select. A cursor appears in the display. Press delete/ch to move the cursor left, make yourchanges and then press talk/flash. This will not change the number in the Caller ID list memory. If you want to save this new number, store the information in memory. (See page 37.) 5/17 12:30PM 03UNIDEN CORP800-297-1023 Talk8002971023•You cannot make acall from the Caller IDlist if your EXI2246 isconnected to private branchexchange (PBX).•When a long distancecall has been set, ¨1¨ appears in the display.EXI2246 12/25/1 9:33 AM Page 36
CALLER ID FEATURESCALLER ID FEATURES [ 37]Storing Caller ID messages in Memory dialingMessages shown in the Caller ID list can be stored in memory dialing.Using the incoming call information (i.e., Caller ID list), the phone number of theparty on the Caller ID list can be stored in memory.1) Press call id/menu.Select the phone number to be stored from the Caller ID listby pressing or .2) Press memory.3) Press and or enter a number (0 - 9) to select the memory location to be stored.4) Press select.You hear a confirmation tone, and the number is stored inmemory. The display returns to the Caller ID list. 5/17 12:30PM 03UNIDEN CORP800-297-1023Select Location1 2 JONE DOE 5/17 12:30PM 03UNIDEN CORP800-297-1023Replace Memory? Yes NoIf a message has already been stored in the selected memorynumber location, a confirmation screen is displayed. Press toselect ¨Yes¨. Press select to overwrite. The display returns to theCaller ID list.You can not store aCaller ID message if nophone number appearsin the message.EXI2246 12/25/1 9:33 AM Page 37
ADDITIONAL INFORMATION[ 38 ]Changing the Digital Security CodeThe digital security code is an identification code used to connect the handset andthe base unit. Normally, setting the code is not necessary.The first time you charge your handset, the security code is automatically set. (See "About the digital security code", page 6.)In the rare situation that you suspect another cordless telephone is using the samesecurity code, you can change the code.1) Remove the handset from the base unit. Press and hold find handset on the base.2) The handset begins emitting a paging sound. While holding find handset, placethe handset on the base unit. The paging sound stops.Leave the handset on the base for more than 3 seconds. A new random securitycode is set.Installing the BeltclipTo attach the beltclipInsert the beltclip into the holes on each side of the handset. Press down until it clicks.To remove the beltclipPull both sides of the beltclip to release the tabs from the holes.Headset InstallationYour phone may be used with an optional headset, the Uniden HS910. To use this feature, insert headset plug into the headset jack. Your phone is ready for hands-free conversations.(Headset may be purchased by calling the Uniden Parts Department or visiting the web site. See Page 7.)If the handset batterypack is completely discharged or the battery pack is removed,the digital security codewill be lost. If this happens, a new securitycode is set automatically next time the battery pack is charged.EXI2246 12/25/1 9:33 AM Page 38
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 39]Note on Power SourcesBattery replacement and handlingWhen the operating time becomes short, even after a battery is recharged, please replace the battery.With normal usage, your battery should last about one year.Please contact your place of purchase or the Uniden Parts Department for a replacement battery.Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use theUniden battery model and Uniden adapter model specifically designated for this product.Power FailureDuring the period that the power is off, you will not be ableto make or receive calls with the telephone.Caution• Use only specified Uniden battery pack (BT-905).• Do not remove the battery from the handset to charge it.• Never throw the battery into a fire, disassemble it, or heat it.• Do not remove or damage the battery casing.CautionDo not use paint thinner,benzene, alcohol, or otherchemical products. Doing so may discolor thesurface of the telephoneand damage the finish.MaintenanceWhen slightly dirtyWipe with a soft, dry cloth.When very dirtyWipe with a soft cloth that has been dampened with diluted, neutral detergent.Dry with a dry cloth.When the charging terminals become dirtyWipe with a dry cloth or a pencil eraser, if necessary.(See page 10 for the location of charging terminals.)EXI2246 12/25/1 9:33 AM Page 39
ADDITIONAL INFORMATION[ 40 ]TroubleshootingIf your phone is not performing to your expectations, please try these simple steps first.SymptomThe status LED won'tilluminate when thehandset is placed in thebase.The audio sounds weakand/or scratchy.Can't make or receive calls.Suggestion•Make sure the AC adapter is plugged into the base and wall outlet.•Make sure the handset is properly seated in base.•Make sure the charging contacts on the handset and base are clean.•Make sure that the base antenna is in a vertical position.•Move the handset and/or base to a different location away from metalobjects or appliances and try again.•Press delete/ch to help eliminate background noise.•Make sure that you are not too far from the base.•Check both ends of the base telephone line cord.•Make sure the AC adapter is plugged into the base and wall outlet.•Disconnect the AC adapter for a few minutes, then reconnect it.•Reset the digital security code (See page 38).•Make sure that you are not too far from the base.EXI2246 12/25/1 9:33 AM Page 40
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 41]SymptomThe handset doesn't ring orreceive a page.Severe noise interference.The Caller ID does not display.If you still have a problem.Suggestion•The battery pack may be weak. Charge the battery for 15-20 hours.•The handset may be too far away from the base unit.•Place the base unit away from appliances or metal objects.•Reset the digital security code (See page 38).•Keep the handset away from microwave ovens, computers, remote controltoys, wireless microphones, alarm systems, intercoms, room monitors,fluorescent lights, and electrical appliances.•Move to another location or turn off the source of interference.•The handset was picked up before the second ring.•The call was placed through a switch board.•Call your local telephone company to verify your Caller ID service is current.•Charge the handset.•Call our customer hotline at 1-800-297-1023.EXI2246 12/25/1 9:33 AM Page 41
ADDITIONAL INFORMATION[ 42 ]General InformationThe phone complies with FCC Parts 15 and 68.Operating temperature: -10°to 50°C (+14°F to +122°F)AC Adapter InformationAC Adapter part number: AD-310Input Voltage: 120V AC 60HzOutput Voltage: 9V DC 210 mABattery InformationBattery part number: BT-905Capacity: 600 mAH, 3.6VBattery use time (per charge)From fully chargedTalk mode duration: 7 hoursStandby mode duration: 14 daysRecharge your phone on a regular basis by returning the handset to the base after each phone call. Whenthe operating time becomes short, even after the battery is recharged, please replace the battery. Withnormal usage, the battery should last about one year. A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contactingthe Uniden Parts Department (800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. Central Time, Mondaythrough Friday. We can also be reached on the web at www.uniden.com Specifications, features, and availability of optional accessories are all subject to change without priornotice.If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount oftime the handset is off the base.EXI2246 12/25/1 9:33 AM Page 42
[ 43 ]ADDITIONALINFORMATIONPrecautions!Before you read anything else, please observe the following:Warning!Uniden America Corporation DOES NOT represent this unit to be water-proof. To reduce the risk of fire, electrical shock, or damage to the unit,DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning•This equipment contains a rechargeable nickel-cadmium battery.•Cadmium is a chemical known to the State of California to cause can-cer.•The rechargeable nickel-cadmium battery contained in this equip-ment may explode if disposed of in a fire.•Do not short-circuit the battery.•Do not charge the rechargeable nickel-cadmium battery used in thisequipment in any charger other than the one designed to charge thisbattery as specified in the owner’s manual. Using another chargermay damage the battery or cause the battery to explode.Rechargeable Nickel-CadmiumBatteries Must Be Recycled orDisposed of Properly•Uniden voluntarily participates in an RBRC®industry program to collect and recycle nickel-cadmium batteries atthe end of their useful life, when taken out of service within theUnited States. The RBRC® program provides a convenient alternativeto placing used nickel-cadmium batteries into the trash or municipalwaste stream, which is illegal in some areas.•Through the RBRC® program, Uniden makes it easy for you to dropoff the used battery at local retailers of replacement nickel-cadmiumbatteries. You may also contact your local recycling center for infor-mation on where to return the used battery. Please call 1-800-8-BAT-TERY for information on Ni-Cd battery recycling in your area.Uniden's involvement in this program is part of its commitment toprotecting our environment and conserving natural resources.•RBRC® is a registered trademark of the Rechargeable BatteryRecycling Corporation.Important Safety InstructionsWhen using your telephone equipment, these basic safety precautionsshould always be followed to reduce the risk of fire, electrical shock,and injury to persons:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall outlet before cleaning. Use a drycloth for cleaning without liquid or aerosol cleaners.4. Do not use this product near water; for example, near a bathtub,wash bowl, kitchen sink or laundry tub, in a wet basement, or near aswimming pool.5. Do not place this product on an unstable cart, stand, or table. Thetelephone may fall, causing serious damage to the unit.6. Slots and openings in the cabinet and the back or bottom are pro-vided for ventilation. To protect the product from overheating, theseopenings must not be blocked or covered. This product should neverbe placed near or over a radiator or heat register. This productshould not be placed in a built-in installation unless proper ventila-tion is provided.7. This product should be operated only from the type of power sourceindicated on the marking label. If you are not sure of the type ofpower supply to your home, consult your dealer or local power com-pany.8. Do not allow anything to rest on the power cord. Do not locate thisproduct where the cord will be damaged by persons walking on it.9. Do not overload wall outlets and extension cords, as this can resultin the risk of fire or electrical shock.10. Never push objects of any kind into this product through cabinetslots, as they may touch dangerous voltage points or short out partsthat could result in a risk of fire or electric shock. Never spill liquidof any kind on the product.11. To reduce the risk of electric shock, do not disassemble this product.Take it to qualified service personnel when service or repair work isrequired. Opening or removing covers may expose you to dangerousvoltages or other risks. Incorrect reassembly can cause electric shockwhen the appliance is subsequently used.12. Unplug this product from the wall outlet and refer servicing to quali-fied service personnel under the following conditions:A. When the power supply cord is damaged or frayed.B. If liquid has been spilled into the product.C. If the product has been exposed to rain or water.D. If the product does not operate normally when following theoperating instructions. (Adjust only those controls that arecovered by the operating instructions. Improper adjustmentof other controls may result in damage and will often requireextensive repair work by a qualified technician.)E. If the product has been dropped or the cabinet has beendamaged.F. If the product exhibits a distinct change in performance.13. Do not use the telephone to report a gas leak in the vicinity of theleak.Additional Battery Safety PrecautionsCaution! To reduce the risk of fire or injury to persons by the bat-tery, read and follow these instructions:1. Use only Uniden battery pack specified in the owner’s manual. 2. Do not dispose of the battery pack in a fire. The cell may explode.Check the nickel-cadmium battery disposal package insert for dispos-al instructions.3. Do not open or mutilate the battery pack. Released electrolyte is cor-rosive and may cause damage to the eyes or skin. It may be toxic ifswallowed.4. Exercise care in handling the battery in order not to short the bat-tery with conducting materials such as rings, bracelets, and keys.The battery or conductor may overheat and cause burns.5. Charge the battery pack provided with or identified for use with thisproduct only in accordance with the instructions and limitationsspecified in the owner’s manual provided for this product.6. Observe proper polarity orientation between the battery pack andbattery charger.SAVE THESE INSTRUCTIONS!Important Electrical ConsiderationsUnplug all electrical appliances when you know an electrical storm isapproaching. Lightning can pass through your household wiring anddamage any device connected to it. This phone is no exception.Warning!Please do not attempt to unplug any appliance during an electricalstorm.The FCC Wants You To KnowChanges or modifications to this product not expressly approved byUniden, or operation of this product in any way other than as detailedby the owner’s manual, could void your authority to operate this prod-uct. The equipment cannot be used on public coin phone service provid-ed by the telephone company. Connection to party line service is sub-ject to state tariffs. (Contact the state public utility commission, publicservice commission or corporation commission for information.)RangeYour new phone is designed to achieve the maximum possible range bytransmitting and receiving according to the highest specifications setforth by the FCC. We have rated this phone to operate at a maximumdistance with the qualification that the range depends upon the envi-ronment in which the telephone is used. Many factors limit range, and itwould be impossible to include all the variables in our rating. TheMaximum Range rating of this phone is meant to be used as a means ofcomparison against other range claims.Telephone Line ProblemsThe FCC has granted the telephone company the right to disconnect ser-vice in the event that your phone causes problems on the telephoneline. Also, the telephone company may make changes in facilities andservices which may affect the operation of your unit. However, yourtelephone company must give adequate notice in writing prior to suchactions to allow you time for making necessary arrangements to contin-ue uninterrupted service.If you are having trouble with your telephone service, you must firstdisconnect your phone to determine if it is the cause of your problem. Ifyou determine that it is the cause, you must leave it disconnected untilthe trouble has been corrected.Radio InterferenceRadio interference may occasionally cause buzzing and humming in yourcordless handset, or clicking noises in the base. This interference iscaused by external sources such as TV, refrigerator, vacuum cleaner, flu-orescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. Ifthese noises continue and are too distracting, please check around yourhome to see what appliances may be causing the problem. In addition,The exclamation point within an equilateral triangle isintended to alert the user to the presence of impor-tant operating and maintenance (servicing) instruc-tions in the literature accompanying the appliance.EXI2246 12/25/1 9:33 AM Page 43
ADDITIONAL INFORMATION[ 44 ]we recommend that the base not be plugged into a circuit that alsopowers a major appliance because of the potential for interference. Becertain that the antenna on the unit is fully extended when needed.In the unlikely event that you consistently hear other voices or distract-ing transmissions on your phone, you may be receiving radio signalsfrom another cordless telephone or other source of interference. If youcannot eliminate this type of interference, you need to change to a dif-ferent channel.Finally, it should be noted that some cordless telephones operate at fre-quencies that may cause interference to nearby TVs and VCRs. To mini-mize or prevent such interference, the base of the cordless telephoneshould not be placed near or on top of a TV or VCR. If interference isexperienced, moving the cordless telephone farther away from the TV orVCR will often reduce or eliminate the interference.More Than One Cordless TelephoneIf you want to use more than one cordless telephone in your home, theymust operate on different channels. Press the channel key to select achannel that provides the clearest communication.Cordless Telephone PrivacyCordless telephones are radio devices. Communications between thehandset and base of your cordless telephone are accomplished by meansof radio waves which are broadcast over the open airways. Because ofthe inherent physical properties of radio waves, your communicationscan be received by radio receiving devices other than your own cordlesstelephone unit. Consequently, any communications using your cordlesstelephone may not be private.Installation ConsiderationsSelecting a LocationBefore choosing a location for your new phone, there are some impor-tant guidelines you should consider:•The location should be close to both a phone jack and continuouspower outlet. (A continuous power outlet is an AC outlet which doesnot have a switch to interrupt its power.)•Keep the base and handset away from sources of electrical noisesuch as motors or fluorescent lighting.•Be sure there is sufficient space to fully extend the base antenna.•The base can be placed on a desk or tabletop or mounted on a stan-dard telephone wall plate.•You should charge your new phone for 15-20 hours before complet-ing the installation or using the handset.Telephone Line OutletsThere are two types of phone outlets:Modular JackMost phone equipment available now uses modular jacks. Phone cordsare fitted with a molded plastic connector which plugs into this type ofjack. If you do not have modular phone jacks, contact your local tele-phone company for information about their installation.Hardwired JackSome equipment is wired directly to a phone jack, and these types ofinstallations require a modular jack converter. This type of installation isnot difficult; however, you should contact your Uniden telephone dealeror a telephone supply store for advice about the proper adapter or con-verter for your particular situation.Connecting the Telephone CordsConsider these safety guidelines before connecting the telephone cords:Caution!• Never install telephone wiring during a lightning storm.• Never touch uninsulated telephone wires or terminals unless the tele-phone line has been disconnected.• Use caution when installing or modifying telephone lines.Applying Power to the BaseThis phone requires an AC outlet, without a switch to interrupt power,and the included AC adapter. To relieve strain on the DC plug when thephone is placed on a desk or table, wrap the power cord around thestrain relief notch on the bottom of the base.NOTE: Place the power cord so that it does not create a triphazard, or where it could become chafed and create a fireor other electrical hazards.Adapter Safety FeaturesIf the AC adapter furnished with this phone has a polarized line plug (aplug having one blade wider than the other), this plug will fit into thepower outlet only one way. If you are unable to insert the plug fullyinto the outlet, try reversing the plug.Do not alter the shape of the blades of the polarized plug!NOTE: If you cannot plug the AC adapter into the outlet, con-tact someone about replacing the outlet.Plug the AC Adapter into a standard 120 VAC wall outlet. Do not use an outlet controlled by a wall switch.Use only the Uniden AC Adapter supplied with this phone.One Year Limited WarrantyImportant:Evidence of original purchase is required for warranty ser-vice.WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the originalretail owner, this Uniden Product to be free from defects in materialsand craftsmanship with only the limitations or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminateand be of no further effect 12 months after the date of original retailsale. The warranty is invalid if the Product is (A) damaged or not main-tained as reasonable or necessary, (B) modified, altered, or used as partof any conversion kits, subassemblies, or any configurations not sold byUniden, (C) improperly installed, (D) serviced or repaired by someoneother than an authorized Uniden service center for a defect or malfunc-tion covered by this warranty, (E) used in any conjunction with equip-ment or parts or as part of any system not manufactured by Uniden, or(F) installed or programmed by anyone other than as detailed by theowner’s manual for this product.STATEMENT OF REMEDY: In the event that the product does not conformto this warranty at any time while this warranty is in effect, warrantorwill either, at its option, repair or replace the defective unit and returnit to you without charge for parts, service, or any other cost (exceptshipping and handling) incurred by warrantor or its representatives inconnection with the performance of this warranty. Warrantor, at itsoption, may replace the unit with a new or refurbished unit. THE LIMIT-ED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTYPERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALLOTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIM-ITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PRO-VIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSE-QUENTIAL DAMAGES. Some states do not allow this exclusion or limita-tion of incidental or consequential damages so the above limitation orexclusion may not apply to you.LEGAL REMEDIES: This warranty gives you specific legal rights, and youmay also have other rights which vary from state to state. This warrantyis void outside the United States of America.PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after fol-lowing the instructions in the owner’s manual you are certain that theProduct is defective, pack the Product carefully (preferably in its origi-nal packaging). The Product should include all parts and accessoriesoriginally packaged with the Product. Include evidence of original pur-chase and a note describing the defect that has caused you to return it.The Product should be shipped freight prepaid, by traceable means, towarrantor at:Uniden America CorporationParts and Service Division4700 Amon Carter Blvd. Fort Worth, TX 76155(800) 297-1023, 8 a.m. to 5 p.m. Central, Monday through FridayEXI2246 12/25/1 9:33 AM Page 44
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 45]I.C. NoticeNotice: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements asprescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Departmentdoes not guarantee the equipment will operate to the user’s satisfaction.Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the users of this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.Users should ensure for their own protection that the electrical ground connections of the power utility,telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.”Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication ofthe maximum number of terminals allowed to be connected to a telephone interface. The termination on aninterface may consist of any combination of devices subject only to the requirement that the sum of theRinger Equivalence Numbers of all the devices does not exceed 5.EXI2246 12/25/1 9:33 AM Page 45
ADDITIONAL INFORMATION[ 46 ]AAC adapter information ......................................42Adjusting ringer and earpiece volume ....................18BBattery packInformation ..................................................42Install ..........................................................9Maintenance ............................................10, 39Preparing and charging .................................. 11Replacement and handling .............................. 39Beltclip installation .......................................... 38CCaller IDCaller ID service .............................................. 32Call Waiting .................................................. 20Deleting ...................................................... 34Setting Caller ID options ................................ 14Using .......................................................... 36Viewing........................................................ 33Channel .......................................................... 20Connection ...................................................... 11DDial mode........................................................ 15Digital security code ...................................... 6, 38E, F, GEarpiece volume................................................ 18HHeadset installation .......................................... 38I, J, K, LI.C. Notice........................................................45Interference......................................................43Language ........................................................16M, N, OMaintenance .................................................... 39Making a call .................................................. 17Memory dialingEditing a stored nameand/or phone number...................................... 27Erasing a stored nameand phone number.......................................... 29Making calls with memory dialing ...................... 25Storing phone numbers and names ........................................ 21Mounting on a wall ............................................12P, QPackage contents................................................ 7Paging ............................................................ 20Precautions ......................................................43RReceiving a call ................................................ 17Redialing a call .......................................... 17, 19Ringer tone and volume...................................... 18RocketDial ...................................................... 30SSetting Menu Options ........................................ 14Setting up the Phone .......................................... 8Setting up the Handset ........................................ 9T, U, V, W, X, Y, ZTechnical information ........................................42Troubleshooting................................................ 40Warranty ..........................................................44IndexEXI2246 12/25/1 9:33 AM Page 46
MEMO [ 47]MemoEXI2246 12/25/1 9:33 AM Page 47
MEMO[ 48 ]MemoEXI2246 12/25/1 9:33 AM Page 48
At Uniden, we´ll take care of you!If you need any assistance with this product, please call our Customer Hotline at1-800-297-1023PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters.Thank you for purchasing a Uniden product.Hours: M-F 8:00 AM to 5:00 PM CST.EXI2246 12/25/1 9:33 AM Page 49
EXI2246 12/25/1 9:33 AM Page 50

Navigation menu