Uniden America UC002R Cordless Telephone System Handset User Manual manual

Uniden America Corporation Cordless Telephone System Handset manual

manual

EXI5160 7/22/03 4:53 PM Page 1
EXI5160 7/22/03 4:53 PM Page 2
Step 2 Install and Charge the Handset BatteryTO INSTALL THE HANDSET BATTERYWhen the handset battery pack is fully charged,after 15-20 hours of charging, plug the telephonecord into the base unit and then into a telephonewall jack. Your phone is set for tone dialing. If your localnetwork requires pulse dialing, please see“Choosing the dialing mode” on page 16.ARemove the cover.TO SET CALLER ID, LANGUAGE AND DIALING OPTIONSAPress and hold call id/menu.BPress vol/ / or vol/ / to movethe pointer to an option.CPress select to change the option setting.DPress end to exit, and return the handsetto the base.OPTIONS INCLUDEAAuto Talk On/OffBCIDCW On/Off(Caller ID on call waiting)CArea Code Enter/RemoveDDial Pulse/ToneDPlug the AC adapter cord into the baseunit and then into a 120V AC outlet.EPlace the handset in the base and chargecontinuously for 15 - 20 hours before usingthe phone.BConnect the battery packconnector with the correct polarity.CReplace the cover.memorydeleteselectredialpause channelvolNote: Three Caller ID options are available: AutoTalk,Caller ID on Call Waiting (CIDCW), and Area Code. QUICK REFERENCE GUIDEStep 3 Connect to Phone LineStep 4Setting Display OptionsUniden Parts Department at(800) 554-3988Hours: M-F 8:00 a.m. to 5:00 p.m. CST. We can also be reached onthe web at www.uniden.comMake sure you have received the following items inthe package. If any of these items are missing ordamaged, contact the Uniden Parts Department.• Base unit• Handset• AC adapter• Rechargeable battery• Telephone cord• Beltclip• This owner’s manual• Other printedmaterialQUICK REFERENCE GUIDE [ 3]www.uniden.comStep 1 Checking the Package ContentsELanguage English/French/SpanishEXI5160 7/22/03 4:53 PM Page 3
[ 4 ] www.uniden.comContentsQuick Reference Guide 3Welcome/Features 5Controls and Functions 6Getting StartedSetting up the Phone 8Mounting the Base Unit on a Wall 13Setting Menu Options 15BasicsMaking and Receiving Calls 18Adjusting the Handset Ringer and Earpiece Volume 19Redial 20Tone Dialing Switch-over 20Traveling Out-of-Range 20Selecting a Different Channel 21Page 21Flash and Call Waiting 21Voice Mail Waiting Indicator 22Memory DialingStoring Phone Numbers and Names 23Steps for Entering Names and Special Characters 25Making Calls with Memory Dialing 26Chain Dialing 27Editing a Stored Name and/or Phone Number 28Erasing a Stored Name and Phone Number 30RocketDialRocketDial 31Storing and Editing the RocketDial 31Making Calls with the RocketDial 31Deleting the RocketDial 32Caller ID FeaturesCaller ID 33When the Telephone Rings 33Viewing the Caller ID Message List 34Deleting Information from the Caller ID List 35Using the Caller ID List 37Additional InformationChanging the Digital Security Code 39Installing the Beltclip 39Headset Installation 39Note on Power Sources 40Maintenance 40Troubleshooting 41General Information 44Precautions & Warranty 45I.C. Notice 47Index 48EXI5160 7/22/03 4:53 PM Page 4
[ 5 ]www.uniden.comWelcome Congratulations on your purchase of the Uniden cordless phone. This cordless phone isdesigned and engineered to exacting standards for reliability, long life, and outstandingperformance.Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary.Be sure to visit our web site: www.uniden.comUniden®and RocketDial®are registered trademarks of Uniden America Corporation.AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of Uniden America Corporation.Features • 5.8 GHz Extended Range Technology• 3 Line Backlit Display• Caller ID and Call Waiting Caller ID• RocketDial• 10 Number Memory Dialing• 32 Digit Redial• Flash and Pause• English, French or Spanish Display Option• Tone/Pulse Dialing• Page/Find handset• Earpiece Volume Control• Ringer Volume Control (High-Low-Off)• Hearing Aid Compatible• 20 Channel AutoscanAs an ENERGY STAR®Partner, Uniden has determined that this product orproduct models meets the ENERGY STAR®guidelines for energy efficiency.ENERGY STAR®is a U.S. registered mark.EXI5160 7/22/03 4:53 PM Page 5
CONTROLS AND FUNCTIONS[ 6 ] www.uniden.commemorydeleteselectredialpause channelcall id/menu RocketDialvol23415768912201615141110131918171. Handset antenna2. Beltclip hole3. Optional headset jack4. Handset battery compartment5. Handset earpiece6. LCD display7. call id (Caller ID)/menu key8. vol (volume)/ / (up) key9. vol (volume)/ / (down) key10. /tone/ (left cursor) key11. redial/pause key12. select key13. Handset microphone and ringer speaker14. RocketDial key15. end key16. talk/flash key17. #/ (right cursor) key18. memory key19. delete/channel key20. Handset charging contactsControls and FunctionsEXI5160 7/22/03 4:53 PM Page 6
CONTROLS AND FUNCTIONS [ 7 ]www.uniden.comcharge/in usefind handset24 2521222321. charge/in use LED22. find handset key23. Base charging contacts24. Telephone line jack25. DC IN 9V jackEXI5160 7/22/03 4:53 PM Page 7
GETTING STARTED[ 8 ] www.uniden.comSetting up the PhoneDo the following steps:A. Choose the best location C. Connect the base unitB. Install the rechargeable battery pack into the handsetA. Choose the best locationBefore choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS. Here are some important guidelinesyou should consider:•The location should be close to both a phone jack and a continuous power outletwhich is not switchable.•Keep the base and handset away from sources of electrical noise such as motors,microwave ovens, and fluorescent lighting.•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shockAvoid heat sources, such as radiators,air ducts, and sunlightAvoid television sets and otherelectronic equipmentAvoid noise sources such as a window by a street with heavy trafficAvoid microwave ovensAvoid personal computersAvoid other cordless telephonesChoose a central locationIf your home hasspecially wired alarmequipment connected tothe telephone line, besure that installing thesystem does not disableyour alarm equipment.If you have questionsabout what will disableyour alarm equipment,contact your telephonecompany or a qualifiedinstaller.EXI5160 7/22/03 4:53 PM Page 8
GETTING STARTEDGETTING STARTED [ 9 ]www.uniden.comB. Install the rechargeable battery pack into the handsetThe handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset isplaced in the base unit.Charge the handset battery pack for at least 15-20hours before using your new cordless telephone for thefirst time! To maximize the charge capacity of your batterypack, DO NOT plug the telephone cord into the base unitand wall jack until the battery is fully charged.1) Press down on the handset battery case cover (use thefinger indention for a better grip) and slide the coverdownward to remove.2) Plug the battery pack connector (red & black wires) intothe small, black jack inside the battery compartment. (The connector notches fit into the grooves of the jack onlyone-way.) Match the wire colors to the polarity label in thebattery compartment, connect the battery and listen for a click to insure connection.3) Make sure you have a good connection by slightly pullingon the battery wires. If the connection is secure, thebattery jack will remain in place.•Use only the UnidenBT-800 rechargeablebattery packsupplied with yourcordless telephone.•You can also useUniden BT-905battery, but its usagetime is less than BT-800.EXI5160 7/22/03 4:53 PM Page 9
GETTING STARTED[ 10 ] www.uniden.com4) Place the battery case cover back on the handset by slidingit upwards until it clicks into place.5) Place the handset in the base unit face forward for 15-20hours without interruption. The base unit’s LED light(labeled charge/in use) illuminates once the handset isplaced in the base. The LED light will illuminate regardlessif the battery pack is connected or not.DO NOT rely on the LED light as an indicator that thebattery pack is connected and the handset is charging!If the base charge/in use LED light does not illuminate:• Check to see if the AC adapter is plugged into the baseunit and the electrical wall outlet properly. (Use only thesupplied AC adapter. Do not use any other AC adapter.)• Check to see if the handset is sitting correctly in thebase and making good contact with the base unit’scharging contacts.• Replacement batteriesare also availablethrough the UnidenParts Department at(800) 554-3988,Monday through Fridayfrom 8:00 a.m. to5:00 p.m. or online atwww.uniden.com• The handset shouldalways sit in chargingcradle face forward tomake good contactwith base unit’scharge contacts.EXI5160 7/24/03 5:30 PM Page 10
GETTING STARTEDGETTING STARTED [ 11 ]www.uniden.com• Even when thebattery pack is notbeing used, it willgradually dischargeover a long period of time. For optimumperformance, be sureto return the handsetto the base unit aftera telephone call.•Talk Mode -The handset is off thebase and talk/flashhas been pressed,enabling a dial tone.•Standby Mode -The handset is not inuse, off the base andtalk/flash has notbeen pressed. A dialtone is not present.Cleaning the charging contactsTo maintain a good charge, it is important to clean thecharging contacts on both the handset and base unit oncea month. Using water only, dampen a cloth to clean thecharging contacts. Then make sure to go back over thecharging contacts with a dry cloth before returning thehandset to the base to charge.The last number dialed in the redial memory, the names and the numbers stored in thememory locations or CID list are retained for up to 30 minutes while you replace thebattery pack.Low battery alertWhen the battery pack is very low and needs to be charged,the phone is programmed to eliminate functions in order tosave power. If the phone is not in use, ¨Low Battery¨appears on the LCD and none of the keys will operate. If the phone is in use, ¨Low Battery¨ flashes and thehandset beeps. Complete your conversation as quickly aspossible and return the handset to the base unit for charging.Do not use paint thinner, benzene, alcohol, or other chemical products. Doing somay discolor the surface of the telephone and damage the finish.EXI5160 7/22/03 4:53 PM Page 11
GETTING STARTED[ 12 ] www.uniden.comPlace the power cord sothat it does not createa trip hazard or where it could become chafedand create a fire orelectrical hazard.Use only the suppliedAD-314 AC adapter. Do not use any otherAC adapter.• Connect the AC adapter to a continuous power supply.• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.C. Connect the base unit1) Connect the AC adapter to the DC IN 9V jackand to a standard 120V AC wall outlet.2) Set the base on a desk or tabletop, and place the handset on the base unit.3) Make sure that the charge/in use LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged inand that the handset makes good contact with the base charging contacts.Route the cord.•After installing the battery pack in the handset, charge your handset at least 15-20hours before plugging into the phone line. Once the handset battery pack is fullycharged, connect the telephone line cord to the base and telephone wall outlet.4) Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged.ModularIf your telephone outlet isn't modular,contact your telephone company for assistance.EXI5160 7/22/03 4:53 PM Page 12
GETTING STARTEDGETTING STARTED [ 13 ]www.uniden.comMounting the Base Unit on a WallStandard wall plate mountingThis phone can be mounted on any standard wall plate.1) Plug the AC adapter into the DC IN 9V jack.2) Wrap the AC adapter cord inside the moldedwiring channel as shown.3) Plug the AC adapter into a standard 120V AC wall outlet.4) Plug the telephone line cord into the TEL LINEjack. Wrap the cord inside the molded wiringchannel as shown.5) Plug the telephone line cord into the telephoneoutlet.6) Align the mounting slots on the base with themounting posts on the wall. Then push in anddown until the phone is firmly seated.DO NOT use an ACoutlet controlled by a wall switch.EXI5160 7/22/03 4:53 PM Page 13
GETTING STARTED[ 14 ] www.uniden.comDirect wall mountingIf you don't have a standard wall plate, you can mount your phone directly to thewall. Before doing this, consider the following:•Avoid electrical cables, pipes, or other items behind the mounting location thatcould cause a hazard when inserting screws into the wall.•Try to mount your phone within 5 feet of a working phone jack to avoid excessivelengths.•Make sure the wall material is capable of supporting the weight of the base and handset.•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitablefor the wall material where the base unit will be placed.1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw headsfor mounting the phone.2) Refer to steps 1 through 6 on page 13 to mount the telephone.EXI5160 7/22/03 4:53 PM Page 14
GETTING STARTEDGETTING STARTED [ 15 ]Setting Menu OptionsThere are five setup options available. They are Caller ID options [AutoTalk, CIDCW(Caller ID on Call Waiting), Area Code], Dial Mode and Language.AutoTalk allows you to answer the phone without pressing the talk/flash button.If the phone rings when AutoTalk is On, simply remove the handset from the baseand the phone automatically answers the call. If the phone rings when AutoTalk is Off, you must press talk/flash to answer the call. Caller ID optionsTo change your AutoTalk and CIDCW:1) Press and hold call id/menu. The following screen appears.2) Use vol/ / or vol/ / to move the pointer to theselection that you would like to change.Press select to toggle between ¨On¨ and ¨Off¨ for AutoTalk and CIDCW.3) Press end and return the handset to the base unit to complete the setting. The handset returns to standby mode.To enter your Area Code:If you enter a 3-digit area code number in the Area Code option, your local areacode does not appear in Caller ID messages. Do not program this option if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you willsee only the local seven digit number. For calls received from outside your local areacode, you will see a full 10-digit number.• If your calling arearequires 10-digit dialing, do notprogram this option.• The cordless phonefeatures includeAutoTalkTM andAutoStandbyTM.AutoTalk allows youto answer a call byjust removing thehandset from the baseso you don't have towaste time pushingbuttons. AutoStandbyallows you to hang upby simply returningthe handset to thebase.www.uniden.comEXI5160 7/22/03 4:53 PM Page 15
GETTING STARTED[ 16 ] www.uniden.comMake sure your batterypack is fully chargedbefore choosing the dialing mode.1) When the phone is in standby mode, press and hold call id/menu. The Caller ID setting screen appears.2) Press vol/ / twice to select ¨Area Code¨.3) Press select.4) Use the number keys (0-9), or delete/channel to enter the 3-digit area code.5) Press select. A confirmation tone sounds and the displayed area code is entered.6) Press end or return the handset to the base unit to complete the setting. The handset returns to standby mode.When the area code has already been stored in memory, thestored area code will be displayed. To change it, use thedelete/channel and number keys to enter the new area code. Then press select. A confirmation tone sounds. To complete thesetting, press end or return the handset to the base unit.Choosing the dialing modeMost phone systems use tone dialing which sends DTMF tones through the phonelines. However, some phone systems (such as those in rural areas) still use pulsedialing. The default setting is tone dialing. Depending on your dialing system, setthe mode as follows:EXI5160 7/22/03 4:53 PM Page 16
GETTING STARTEDGETTING STARTED [ 17 ]www.uniden.com1) When the phone is in standby mode, press and hold call id/menu. The following screen appears.2) Press vol/ / three times to select ¨Dial¨.3) Press select to toggle between ¨Tone¨ and ¨Pulse¨ for each setting.4) Press end or return the handset to the base unit to complete the setting. The handset returns to standby mode.•If you are not sure of your dialing system, set for tone dialing and make a trial call. If the call connects, leave the setting as is. Otherwise, set for pulse dialing.•If your phone system requires pulse dialing and you need to send the DTMF tones forcertain situations during a call, you may "switch-over" to tone dialing. (Refer to"Tone Dialing Switch-over" on page 20.)Setting the language1) When the phone is in standby mode, Press and hold call id/menu. The following screen appears.2) Press vol/ / four times to select ¨Language¨.3) Press select to toggle ¨Eng¨, ¨Fr.¨ or ¨Esp¨ for each setting.4) Press end or return the handset to the base unit to complete the setting. Thehandset returns to standby mode.EXI5160 7/22/03 4:53 PM Page 17
BASICS[ 18 ] www.uniden.comMaking and Receiving CallsPick up the handset (AutoTalk:On) or pick up the handset andpress talk/flash (AutoTalk: Off).1) Pick up the handset.2) Press talk/flash.3) Listen for the dial tone.4) Enter the number.OR1) Pick up the handset.2)Enter the number, then presstalk/flash.1) Pick up the handset.2) Press talk/flash.3) Listen for the dial tone.4) Press redial/pause.OR1) Pick up the handset.2) Press redial/pause, thenpress talk/flash.Handset On Base Handset Off BaseTo receivea callTo makea callTo hang upTo redialPress talk/flash (AutoTalk: Off),or press talk/flash,/tone/ ,#/ or any number key(AntoTalk: On).1) Press talk/flash.2) Listen for the dial tone.3) Enter the number.OREnter the number, then presstalk/flash.1) Press talk/flash.2) Listen for the dial tone.3) Press redial/pause.ORPress redial/pause, then presstalk/flash.Press end or return the handset to the base (AutoStandby).Refer to page 15"Setting Menu Options"to turn On the AutoTalkfeature if desired.EXI5160 7/22/03 4:53 PM Page 18
BASICSBASICS [ 19 ]www.uniden.comAdjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volumePress the volume up key or volume down key (labeled as,vol/ / or vol/ / ) in standby mode to select one of fiveringer tones and volume combinations.Earpiece volumePress the volume up key or volume down key (labeled as, vol//or vol/ / ) during a call to change the earpiece volumeof the handset. This setting will remain in effect after the tele-phone call has ended.Temporarily Mute RingerIf the handset is off the base, simply press the end to temporarily mute theincoming ring. The ringer will sound with the next incoming call.call id/menu RocketDialvolEXI5160 7/22/03 4:53 PM Page 19
BASICS[ 20 ] www.uniden.comRedialThe redial/pause key redials the last number dialed. The redialed number can be upto 32 digits long.Tone Dialing Switch-overSome telephone companies use equipment that requirespulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the call. This feature is usefulwhen you need tone dialing to use automated systems, forexample, entering your bank account number after you have called your bank. Initially make your call with the pulse dialing mode. Once your call connects, pressthe /tone/ . Enter the desired number. These digits will be sent as tone dialing.Once the call ends, the tone mode is canceled and pulse dialing mode resumes. Traveling Out-of-RangeDuring a call, as you begin to move your handset too far from your base unit, noiseincreases. If you pass the range limits of the base unit, your call will terminate within 1 minute.memorydeleteselectredialpause channel• The tone feature onlyapplies when the dialmode is set to pulse.• This special numbercan be stored in amemory location. Thisis referred to as ChainDialing (See page27.)EXI5160 7/22/03 4:53 PM Page 20
BASICSBASICS [ 21 ]www.uniden.comThe UltraClear PlusTMtrue compander circuitryvirtually eliminatesbackground noise. Thisinnovative technology,together with 20different channels,provides you with thebest possible receptionduring all yourconversations.Flash and Call WaitingIf you have "Call Waiting" service and a call waiting tonesounds while you are on a call, press talk/flash to acceptthe waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, presstalk/flash again.call id/menu RocketDialvolPageTo locate the handset (while it's off the base), press find handset on the base. The handset beeps for 60 seconds.Paging is canceled when pressing any key or the handset isreturned to the base.charge/in usefind handsetSelecting a Different ChannelIf you encounter interference while using your phone, you can manually change thephone´s channel for clear operation. This function works only when the phone is in use. Press delete/channel. ¨Scanning¨ appears on the display, indicating thephone is changing to another channel. For more information on interference, refer to"Precautions" on page 45.You can cancel pagingby pressing the findhandset on the base.hintsYou must subscribe through your local telephone company toreceive Call Waiting Service.EXI5160 7/22/03 4:53 PM Page 21
BASICS[ 22 ] www.uniden.comVoice Mail Waiting IndicatorIf you subscribe to voice mail service, you can use your cordless telephone to accessyour voice mailbox. The charge/in use light on the base of your phone flasheswhenever you have messages waiting in your voice mailbox. Just program theRocketDial with your access number and you can get your messages at the touch ofa button. (The voice mail service provider will supply you with the access number.This number may be simply a phone number. Refer to the provider’s literature.)You may need to occasionally reset the indicator if it remains On after you haveretrieved your messages. To reset the indicator, press and hold find handset for5 seconds.You must subscribe tovoice mail service fromyour telephone companyin order to use thisfeature. The voice mailcompany will provideyou with the accessnumber.EXI5160 7/22/03 4:53 PM Page 22
MEMORY DIALINGMEMORY DIALING [ 23 ]www.uniden.comStoring Phone Numbers and NamesMemory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to 10 names/numbers in the handset.1) Press memory in standby mode, ¨Select Memory¨ isdisplayed.2) Press vol/ / or vol/ / , or enter a number (1-0) to select the memory location where you would like to store the number.3) Press memory or select.4) Press memory or select. The Store Name screen appears anda cursor flashes indicating that the display is ready for thename to be entered.If the Edit screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select ¨Go Back¨ to choose another location.5) To enter a name (up to 13 characters), use the number keys.• See the "Steps for Entering Names and Special Characters". (See page 25).• Use #/ and /tone/ to move the cursor to the desired location.• Use delete/channel to delete characters as needed.• Press and hold delete/channel to delete all the characters.• If a name is not required, go to step 6. Select Memory01 02 JOHN DOE Store Name Edit Memory01 Delete Memory01 Go Back• In memory dialingoperation, you mustpress a key within 30seconds or the phonewill return to standbymode. If you returnthe handset to thebase, the phone willreturn to standbymode also.• You have 30 secondsafter pressingmemory or select toenter the number youwish to store.Otherwise, an errortone will sound andthe phone will returnsto standby mode. 01:(Empty)Press Selectto editEXI5160 7/22/03 4:53 PM Page 23
MEMORY DIALING[ 24 ] www.uniden.comThe pause feature isuseful for long distancecalling, credit card dialing, or sequencesthat require a pausebetween digits.6) Press memory or select. ¨Store Number¨ is displayed.The cursor flashes indicating that the display is ready forthe number to be entered.7) Use the number keys, /tone/ or #/ to enter thephone number. The phone number cannot exceed 20 digits.Use redial/pause to enter a pause in the dialing sequence. The display shows a ¨P¨. Each pause counts as one digit andrepresents a two second delay of time between the digits.Use delete/channel to delete digits as needed.8) Press memory or select. You will hear a confirmation tone,and the following screen appears. Memory storage iscomplete.For example, if you store a name and number into memorylocation number 01, the display shows ¨Memory01 Stored¨.After about 2 seconds, the following screen is displayed. Repeat steps 2 - 8 to store more numbers.9) Press end to return to standby mode. Store Number8007303456 Memory01 Stored01 Movies02 JOHN DOE03 MOM AND DAD Store NumberEXI5160 7/22/03 4:53 PM Page 24
MEMORY DIALINGMEMORY DIALING [ 25 ]www.uniden.comSteps for Entering Names and Special CharactersRefer to the letters on the number keys to select the desired characters.With each press of a numeric key, the displayed character appears in the followingorder: Upper case letters first, lower case letters next and finally the number corresponding to the key.If you make a mistake while entering a nameUse /tone/ or #/ to move the cursor to the incorrect character. Press delete/channel to erase the wrong character, then enter the correct character. To delete all characters, press and hold delete/channel.For example, to enter Movies.1) Pick up the handset. Press memory.2) Enter a number or press vol/ / or vol/ / to select a memory location.3) Press memory or select.4) Press memory or select. (When there is information already stored in the select-ed memory location, ¨Edit MemoryXX¨ is displayed. See page 28 for informa-tion on “Editing a Stored Name and/or Phone Number”.)5) Press 6then press #/ to move the cursor to the right.6) Press 6six times.7) Press 8six times.8) Press 4six times.9) Press 3five times.10) Press 7eight times.11) When finished, press memory or select.To continue to store the telephone number,proceed to step 7 on page 24.Number of times key is pressedkeys 1 2 3 4 5 6 7 8 91ABCabc2DEFdef3GHIghi4JKLjkl5MNOmno6PQRSpqrs7TUVtuv8WXYZwxyz9*#-&()(blank) 02abc3def4ghi5jkl6mno7pqrs8tuv9wxyz01operIf the next characteruses the same numberkey, you must press#/to move thecursor over. Otherwisethe next time you pressthe number key, itoverwrite the existingcharacter.EXI5160 7/24/03 5:30 PM Page 25
MEMORY DIALING[ 26 ] www.uniden.comMaking Calls with Memory DialingMemory dialing from Standby Mode1) Press memory. The handset displays your programmed memorylocations.2) Press vol/ / or vol/ / , or enter the number (1-0)to select the memory location you would like to dial.3) Press talk/flash. ¨Talk¨ and the volume setting appear on the display. Then the displayed number is dialed. Select Memory01 Movies 02 JOHN DOE Talk8007303456• If you press memoryor select beforetalk/flash, you canconfirm the name andthe number stored inthe selected memorylocation.• Whenever you areusing a memory menuscreen, you mustpress a key within 30seconds or the phonewill return to standbymode.To exit the memory function without dialing, press end.The handset returns to standby mode.EXI5160 7/22/03 4:53 PM Page 26
MEMORY DIALINGMEMORY DIALING [ 27 ]www.uniden.comMemory dialing from Talk Mode1) Press talk/flash. ¨Talk¨ and the volume setting appears.2) Press memory.3) Press vol/ / or vol/ / , or enter a number (1-0) to select the memory location of the desired phonenumber. If you press select key, the number is dialed. 4) The phone number in the memory will be dialed when theselect is pressed.5) To hang up, press end.Chain DialingThe memory locations on the handset are not limited to phone numbers. You canalso store a group of numbers (up to 20 digits) that you need to enter once yourcall connects. This is referred to as Chain Dialing.An example of this is a bank account number. Once you have called your bank andare prompted to enter the account number, press memory and select the location number where the special number has been stored. Then press select.Store your special number with an identifying name. (Refer to "Storing PhoneNumbers and Names" on page 23.) Talk Talk Volume High Select Memory01 Movies02 JOHN DOE Talk 0:358007303456EXI5160 7/22/03 4:53 PM Page 27
MEMORY DIALING[ 28 ] www.uniden.comEditing a Stored Name and/or Phone Number1) Press memory, ¨Select Memory¨ is displayed.2) Press vol/ / or vol/ / , or enter a number (1-0) to select the memory location you would like toedit, and press memory or select.3) Press memory or select.The following screen appears with the memory locationnumber that you have selected.4) Press vol/ / or vol/ / to select ¨Edit MemoryXX¨,then press memory or select. The following screen appears.The cursor flashes indicating that the display is ready forthe name to be edited. When a name has not been stored,the cursor appears at the beginning of the second line.5) Use the number keys, /tone/ ,#/ , or delete/channelto edit the name. (See page 25.) To edit only the phonenumber, skip this step.6) Press memory or select. The following screen appears.The cursor flashes indicating that the display is ready forthe number to be edited. Select Memory01 Movies02 JOHN DOE Edit Memory01 Delete Memory01 Go Back Store NameMovies Store Number8007303456 01:Movies8007303456EXI5160 7/22/03 4:53 PM Page 28
MEMORY DIALINGMEMORY DIALING [ 29 ]www.uniden.com7) Use the number key, /tone/ ,#/ ,redial/pause ordelete/channel to edit the phone number. The phone number cannotexceed 20 digits. (See page 24.)If you don´t want to change the phone number, skip this step.8) Press memory or select. If you changed either name orphone number, a confirmation display shows up. If it iscorrect, press vol/ / and press select. You hear aconfirmation tone, and the following screen appears. Thememory storage is complete.For example, if you edit a name and number into memorylocation number 01, the display shows ¨Memory01Stored¨. After about 2 seconds, Select memory isdisplayed.9) Press end to return to standby mode. Memory01 Stored01 Movies02 JOHN DOE03 MOM AND DADReplace Memory? Yes NoEXI5160 7/22/03 4:53 PM Page 29
MEMORY DIALING[ 30 ] www.uniden.comErasing a Stored Name and Phone Number1) Press memory, ¨Select Memory¨ is displayed.2) Press vol/ / or vol/ / , or enter a number (1-0) to select the memory location you would like toerase.3) Press memory or select.4) Press memory or select.The Edit screen appears with the memory location numberthat you have selected in the display.5) Press vol/ / to move the pointer down to ¨DeleteMemoryXX¨.6) Press memory or select. The ¨Delete MemoryXX?¨ screenappears.7) Press vol/ / to move the pointer to ¨Yes¨.8) Press select or delete/channel.You hear a confirmation tone, and the ¨MemoryXXDeleted¨ screen appears.9) After about 2 seconds, the display returns to the Select Memory screen. You may delete the information inanother memory location (return to step 2) or press end toreturn to standby mode. Select Memory01 Movies02 JOHN DOE Edit Memory02 Delete Memory02 Go BackDelete Memory02? Yes No Memory02 Deleted 01 Movies0203 MOM AND DAD02:JOHN DOE5452930EXI5160 7/22/03 4:53 PM Page 30
ROCKETDIALROCKETDIAL [ 31 ]www.uniden.com Edit Number Delete Number Go Back Store Number Number StoredRocketDialYou can store your most frequently dialed number in the RocketDiallocation. The RocketDial allows you to dial a number with one keypress. (There is no need to press talk/flash. The phone willautomatically dial the number stored.) If you subscribe to voicemail service, store your access number in this location.Storing and Editing the RocketDial1) When the phone is in standby mode, press and holdRocketDial. The following display appears. If the Edit screen appears, there is a number already stored.Press vol/ / or vol/ / to select ¨Edit Number¨,then press select.2) Store the number by following step 7 under "Storing PhoneNumbers and Names" on page 24.3) Press select.You hear a confirmation tone, and the ¨Number Stored¨screen appears. Memory storage is complete.Making Calls with the RocketDialWhen the phone is in standby mode, simply press RocketDial. The number stored inthe RocketDial memory location is instantly dialed. Store Number Store Number Store Number800vol•RocketDial®is aone touch speeddial key thatautomatically dialsyour mostimportant orfrequently callednumber. Thenumber dialed, is apreset numberstored by the user.• Number stored inRocketDial isindependent fromthe numbers storedin Memory Dial.• If the RocketDial doesnot have a storednumber, the handsetwill beep rapidly andthe phone will notdial.EXI5160 7/22/03 4:53 PM Page 31
ROCKETDIAL[ 32 ] www.uniden.comDeleting the RocketDial1) When the phone is in standby mode, press and holdRocketDial. The following display appears.2) Press vol/ / or vol/ / to select ¨Delete Number¨.3) Press select. Following display appears.4) Press vol/ / to move the pointer to ¨Yes¨.5) Press select or delete/channel.You hear a confirmation tone, and the following displayappears. After about 2 seconds, the handset returns tostandby mode. Edit Number Delete Number Go BackDelete Number? Yes No Number DeletedEXI5160 7/22/03 4:54 PM Page 32
CALLER ID FEATURESCALLER ID FEATURES [ 33 ]www.uniden.com• If you answer a callbefore the Caller IDmessage is received(for example: beforethe second ring), theCaller ID message willnot appear.• When the call isreceived via a telephone companythat does not offerCaller ID service, thecaller´s phone number and name do not appear. (This includes international calls.)• When the call is via a private branchexchange (PBX), thecaller´s phone number and namemay not appear.Caller IDYou must subscribe to Caller ID service to use this feature.When the telephone rings, the Caller ID feature allows you to view the caller´s nameand phone number on the display before you answer the phone. The handset displaysthe phone number of the incoming call, the name, and time. Additionally, you candial the displayed number and store the information for memory dialing. Make sureyou have turned on the Caller ID on Call Waiting feature. (See page 15.)When the Telephone Rings1) When the Caller ID message is received, the display shows the caller´s phone number along with the date and time. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller´s name, thecaller´s name appears on the display (up to 15 letters).You may receive any one of the following messages:When invalid data is received “Incomplete Data”When a private name is received “Private Name”When a private number is received “Private Number”When a unknown name is received “Unknown Name”When a unknown number is received “Unknown Number” 5/11 12:30PM Jane Smith214-555-1234The date andtime receivedCaller's nameCaller's phone numberEXI5160 7/22/03 4:54 PM Page 33
CALLER ID FEATURES[ 34 ] www.uniden.comViewing the Caller ID Message ListThe Caller ID list stores information for up to 30 messages (Caller IDnames/numbers) - even unanswered calls.1) Press call id/menu.The summary screen appears. The screen shows the numberof new messages and total messages.2) Press vol/ / to display the latest Caller ID message.3) Press vol/ / to see the next message. Or press vol//key to see the previous message.4) Press end to return to standby mode.Data errors appear as ¨ ¨. Caller ID New :01 Total:02 5/17 12:30PM 03Jane Smith214-555-1234• In Caller ID operation,if no key is pressed formore than 30 seconds,an error tone soundsand the handsetreturns to standbymode.• If a call comes in via atelephone system thatdoes not offer CallerID service, noinformation is stored.• Each message can beup to 15 charactersfor the phone numberand the name.• The number of callsfrom the same CallerID appears next tothe received time.Once you view thenew message, thenumber will becleared and disappear.2) When you pick up the phone, the display changes to ¨Talk¨. (AutoTalk featureis set to on.)EXI5160 7/22/03 4:54 PM Page 34
CALLER ID FEATURESCALLER ID FEATURES [ 35 ]www.uniden.com• While using the¨Delete All?¨ or¨Delete Message?¨screen if no key ispressed for more than30 seconds, an errortone sounds and thetelephone returns to standby mode.• If you get an incoming call or page,the deleting operationis canceled and youcan answer the call orpage.Deleting Information from the Caller ID ListThe cordless phone stores up to 30 messages (Caller ID names/numbers). If thephone receives the 31st message, the oldest one in the list is automatically deleted.Caller ID data can also be deleted manually.Deleting a Caller ID message1) Press call id/menu. Display the message to be deleted from the Caller ID list by pressing vol/ / or vol/ / .2) Press delete/channel.3) Press vol/ / or vol/ / to select ¨Yes¨ or ¨No¨.4) Press select or delete/channel.When the pointer is at ¨Yes¨:A tone sounds and the Caller ID message is deleted. The next Caller ID message isthen displayed.When the pointer is at ¨No¨:The display returns to the Caller ID message.Deleting all Caller ID names/numbers1) Press call id/menu.2) Press delete/channel. 5/17 12:30PM 03Jane Smith214-555-1234Delete Message? Yes No Caller ID New :01 Total:02EXI5160 7/22/03 4:54 PM Page 35
CALLER ID FEATURES[ 36 ] www.uniden.com3) Press vol/ / or vol/ / to select ¨Yes¨ or ¨No¨.4) Press select or delete/channel.When the pointer is at ¨Yes¨:A tone sounds and all stored Caller ID messages are deleted.When the pointer is at ¨No¨:The display returns to the summary screen. Caller ID Total:00 Caller ID New :01 Total:02Delete All? Yes NoEXI5160 7/22/03 4:54 PM Page 36
CALLER ID FEATURESCALLER ID FEATURES [ 37 ]www.uniden.comUsing the Caller ID ListCalling a party from the Caller ID listYou can place a call from the Caller ID list. The cordless phone stores up to 30 messages (Caller ID names/numbers).1) Press call id/menu. Select the phone number that youwant to dial by pressing vol/ / or vol/ / .2) Press talk/flash. The displayed phone number dials automatically.Long Distance calls and Area Code Setting/CancellationPressing 1while the incoming Caller ID information is displayed (in step 1) willplace the prefix ¨1¨ in the display to set up for a long distance call. Pressing 3willset or cancel an area code setting. 5/17 12:30PM 03Jane Smith214-555-1234 Talk2145551234• You cannot make acall from the Caller IDlist if your cordlesstelephone isconnected to aprivate branchexchange (PBX).• When a long distancecall has been set, ¨1¨appears in the display.You can place a call from Talk Mode. Press the talk/flash, then press the call id/menu. Select the phone number that you want to dial by pressing the vol/ / or vol/ / , then press select.The displayed phone number will be dialed.EXI5160 7/22/03 4:54 PM Page 37
CALLER ID FEATURES[ 38 ] www.uniden.comStoring Caller ID messages in Memory dialingMessages (Caller ID names/numbers) shown in the Caller ID list can be stored inmemory dialing.1) Press call id/menu.Select the phone number to be stored from the Caller ID listby pressing vol/ / or vol/ / .2) Press memory.3) Press vol/ / or vol/ / or enter a number (1-0) to select the memory location to be stored.4) Press select.You hear a confirmation tone, and the number is stored in memory. The display returns to the Caller ID list. 5/17 12:30PM 03Jane Smith214-555-1234 Select Memory01 02 JOHN DOE 5/17 12:30PM 03Jane Smith214-555-1234Replace Memory? Yes NoIf a message has already been stored in the selected memorynumber location, a confirmation screen is displayed. Press vol/ / to select ¨Yes¨. Press select to overwrite. The display returns to the Caller ID list.You cannot store aCaller ID message if nophone number appearsin the message.EXI5160 7/22/03 4:54 PM Page 38
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 39 ]www.uniden.comChanging the Digital Security CodeThe digital security code is an identification code used to connect the handset andthe base unit. Normally, setting the code is not necessary. The first time you chargeyour handset, the security code is automatically set. In the rare situation that you suspect another cordless telephone is using the samesecurity code, you can change the code.1) Remove the handset from the base unit. Press and hold find handset on the base.2) While holding find handset, place the handset in the base unit, and leave thehandset on the base for more than 3 seconds. A new random security code is set.Installing the BeltclipTo attach the beltclipInsert the beltclip into the holes on each side of the handset. Press down until it clicks.To remove the beltclipPull both sides of the beltclip to release the tabs from the holes.Headset InstallationYour phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations.(Headset may be purchased by calling the Uniden Parts Department or visiting the web site, see QUICK REFERENCE GUIDE on page 3.)• To protect you againstmisbilled calls whichmight result from yourphone being activatedby other equipment,the cordless phoneprovides AutoSecureTMto electronically locksyour phone when thehandset is in thebase. Also, theRandom CodeTM digitalsecurity whichautomatically selectsone of over 262,000digital security codesfor the handset andbase.• If the handset batterypack is completelydischarged or thebattery pack isremoved, the digitalsecurity code will belost. If this happens,a new security code isset automatically thenext time the batterypack is charged.EXI5160 7/22/03 4:54 PM Page 39
ADDITIONAL INFORMATION[ 40 ] www.uniden.comNote on Power SourcesBattery replacement and handlingWhen the operating time becomes short, even after a battery is recharged, please replace the battery.With normal usage, your battery should last about one year. Please contact your place of purchase or theUniden Parts Department for a replacement battery.Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use theUniden battery model and Uniden adapter model specifically designated for this product.Power FailureDuring the period that the power is off, you will not be ableto make or receive calls with the telephone.Caution• Use only the specified Uniden battery pack.• Do not remove the battery from the handset to charge it.• Never throw the battery into a fire, disassemble it, or heat it.• Do not remove or damage the battery casing.CautionDo not use paint thinner,benzene, alcohol, or otherchemical products. Doing so may discolor thesurface of the telephoneand damage the finish.MaintenanceTo maintain a good charge, it is important to clean the charging contacts onboth the handset and base unit once a month. Using water only, dampen a cloth to clean the charging contacts. Then make sure to go back over the charging contacts with a dry cloth.EXI5160 7/22/03 4:54 PM Page 40
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 41 ]www.uniden.comTroubleshootingIf your phone is not performing to your expectations, please try these simple steps first.SymptomThe charge/in use LEDwon't illuminate when thehandset is placed in the base.The audio sounds weakand/or scratchy.Can't make or receive calls.Suggestion•Make sure the AC adapter is plugged into the base and wall outlet.•Make sure the handset is properly seated in the base.•Make sure the charging contacts on the handset and base are clean.•Move the handset and/or base to a different location away from metalobjects or appliances and try again.•Press delete/channel to help eliminate background noise.•Make sure that you are not too far from the base.•Check both ends of the base telephone line cord.•Make sure the AC adapter is plugged into the base and wall outlet.•Disconnect the AC adapter for a few minutes, then reconnect it.•Change the digital security code (see page 39).•Make sure that you are not too far from the base.EXI5160 7/22/03 4:54 PM Page 41
ADDITIONAL INFORMATION[ 42 ] www.uniden.comSymptomThe handset doesn't ring orreceive a page.Severe noise interference.The Caller ID does not display.Voice Message Indicationdoes not work.If you still have a problem.Suggestion• The battery pack may be weak. Charge the battery for 15-20 hours.• The handset may be too far away from the base unit.• Place the base unit away from appliances or metal objects.• Change the digital security code (see page 39).• Check the battery pack to insure there is a secure connection.• Make sure ringer volume isn’t set to “off”.• Keep the handset away from microwave ovens, computers, remote controltoys, wireless microphones, alarm systems, intercoms, room monitors,fluorescent lights, electrical appliances, other cordless telephones andother devices that use electricity.• Move to another location or turn off the source of interference.• The handset was picked up before the second ring.• The call was placed through a switchboard.• Call your local telephone company to verify your Caller ID service iscurrent.• Charge the handset.• Contact your local telephone company to make sure that your telephonereceives FSK message signaling.• Call our customer hotline at 1-800-297-1023.EXI5160 7/22/03 4:54 PM Page 42
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 43 ]www.uniden.comCaseIf the handset or base is exposed tomoisture or liquid, but only affects theexterior plastic housing.If moisture or liquid has entered theplastic-housing (i.e. liquid can beheard in the phone or liquid hasentered the handset batterycompartment or vent openings on thebase).ActionWipe off the liquid and use as normal.Handset:1. Remove the battery cover and leave it off for ventilation.2. Remove the battery pack by disconnecting. 3. Leave the battery cover off and the battery pack disconnected for at least 3 days.4. Once completely dry, reconnect the battery pack and the battery cover. 5. Recharge the handset’s battery pack for 20 hours in the base unit before using the phone.Base:1. Disconnect the AC adapter from the base unit, cutting off electrical power.2. Disconnect the telephone cord from the base unit.3. Let dry for at least 3 days.IMPORTANT: You must unplug the telephone line while recharging the battery pack toavoid charge interruption.CAUTION:DO NOT use a microwave oven to speed up the drying process. This will cause permanentdamage to the handset, base and the microwave oven.After following these steps, if your cordless telephone does not work, please send to:Uniden America CorporationParts and Service Division4700 Amon Carter Blvd.Ft. Worth, TX761551-800-554-3988. Monday through Friday8 a.m. to 5 p.m. CSTLiquid DamageMoisture and liquid can damage your cordless phone. In case of accidental submersion, please read thefollowing steps.EXI5160 7/22/03 4:54 PM Page 43
ADDITIONAL INFORMATION[ 44 ] www.uniden.comGeneral InformationThe phone complies with FCC Parts 15 and 68.Operating temperature: -10°to 50°C (+14°F to +122°F)AC Adapter InformationAC Adapter part number: AD-314Input Voltage: 120V AC 60HzOutput Voltage: 9V DC 350 mABattery InformationBattery part number: BT-800Capacity: 800 mAH, 3.6VFrequency 925.181-927.451 MHz5739.320-5746.130 MHzRecharge your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year. A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contactingthe Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Mondaythrough Friday. We can also be reached on the web at www.uniden.com. Specifications, features, and availability of optional accessories are all subject to change without priornotice.•To avoid damage to the phone use only Uniden AD-314 and BT-800 (or BT-905 having less usage time) with your phone.• If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of time the handsetis off the base.You can also use BT-905, but its usage time is less than BT-800.Purchase BT-800 at Uniden Website www.uniden.com.EXI5160 7/22/03 4:54 PM Page 44
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 45 ]www.uniden.comPrecautions!Before you read anything else, please observe the following:Warning!Uniden America Corporation DOES NOT represent this unit to bewaterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning• This equipment contains a rechargeable nickel-cadmium battery.• Cadmium is a chemical known to the State of California to causecancer.• The rechargeable nickel-cadmium battery contained in thisequipment may explode if disposed of in a fire.•Do not short-circuit the battery.• Do not charge the rechargeable nickel-cadmium battery used in thisequipment in any charger other than the one designed to chargethis battery as specified in the owner’s manual. Using anothercharger may damage the battery or cause the battery to explode.Rechargeable Nickel-CadmiumBatteries Must Be Recycled orDisposed of Properly• Uniden voluntarily participates in an RBRC®industry program to collect and recycle nickel-cadmium batteries atthe end of their useful life, when taken out of service within theUnited States. The RBRC® program provides a convenient alternative to placingused nickel-cadmium batteries into the trash or municipal wastestream, which is illegal in some areas.• Through the RBRC® program, Uniden makes it easy for you to dropoff the used battery at local retailers of replacement nickel-cadmiumbatteries. You may also contact your local recycling center forinformation on where to return the used battery. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area.Uniden's involvement in this program is part of its commitment toprotecting our environment and conserving natural resources.• RBRC® is a registered trademark of the Rechargeable BatteryRecycling Corporation.Uniden works to reduce lead content in our PVC coated cords in ourproduct and accessories.Warning!The cords on this products and/or accessories contain lead, a chemicalknown to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.Important Safety InstructionsWhen using your telephone equipment, these basic safety precautionsshould always be followed to reduce the risk of fire, electrical shock,and injury to persons:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall outlet before cleaning. Use a drycloth for cleaning without liquid or aerosol cleaners.4. Do not use this product near water; for example, near a bathtub,wash bowl, kitchen sink or laundry tub, in a wet basement, or near aswimming pool.5. Do not place this product on an unstable cart, stand, or table. The telephone may fall, causing serious damage to the unit.6. Slots and openings in the cabinet and the back or bottom areprovided for ventilation. To protect the product from overheating,these openings must not be blocked or covered. This product shouldnever be placed near or over a radiator or heat register. This productshould not be placed in a built-in installation unless properventilation is provided.7. This product should be operated only from the type of power sourceindicated on the marking label. If you are not sure of the type ofpower supply to your home, consult your dealer or local powercompany.8. Do not allow anything to rest on the power cord. Do not locate thisproduct where the cord will be damaged by persons walking on it.9. Do not overload wall outlets and extension cords, as this can resultin the risk of fire or electrical shock.10. Never push objects of any kind into this product through cabinetslots, as they may touch dangerous voltage points or short out partsthat could result in a risk of fire or electric shock. Never spill liquidof any kind on the product.11. To reduce the risk of electric shock, do not disassemble this product.Take it to qualified service personnel when service or repair work isrequired. Opening or removing covers may expose you to dangerousvoltages or other risks. Incorrect reassembly can cause electric shockwhen the appliance is subsequently used.12. Unplug this product from the wall outlet and refer servicing toqualified service personnel under the following conditions:A. When the power supply cord is damaged or frayed.B. If liquid has been spilled into the product.C. If the product has been exposed to rain or water.D. If the product does not operate normally when following theoperating instructions. (Adjust only those controls that arecovered by the operating instructions. Improper adjustmentof other controls may result in damage and will often requireextensive repair work by a qualified technician.)E. If the product has been dropped or the cabinet has beendamaged.F. If the product exhibits a distinct change in performance.13. Do not use the telephone to report a gas leak in the vicinity of theleak.Additional Battery Safety PrecautionsCaution! To reduce the risk of fire or injury to persons by thebattery, read and follow these instructions:1. Use only the Uniden battery pack specified in the owner’s manual. 2. Do not dispose of the battery pack in a fire. The cell may explode.Check the nickel-cadmium battery disposal package insert fordisposal instructions.3. Do not open or mutilate the battery pack. Released electrolyte iscorrosive and may cause damage to the eyes or skin. It may be toxicif swallowed.4. Exercise care in handling the battery in order not to short thebattery with conducting materials such as rings, bracelets, and keys.The battery or conductor may overheat and cause burns.5. Charge the battery pack provided with or identified for use with thisproduct only in accordance with the instructions and limitationsspecified in the owner’s manual provided for this product.6. Observe proper polarity orientation between the battery pack andbattery charger.SAVE THESE INSTRUCTIONS!Important Electrical ConsiderationsUnplug all electrical appliances when you know an electrical storm isapproaching. Lightning can pass through your household wiring anddamage any device connected to it. This phone is no exception.The FCC Wants You To KnowChanges or modifications to this product not expressly approved byUniden, or operation of this product in any way other than as detailedby the owner’s manual, could void your authority to operate thisproduct. Your telephone compiles with Part 68 of FCC Rules. You must,upon request, provide the FCC registration number and the REN to yourtelephone company. Both numbers are on the base unit.NOTE: You must not connect your phone to:• coin-operated systems• most electronic key telephone systemsRangeYour new phone is designed to achieve the maximum possible range bytransmitting and receiving according to the highest specifications setforth by the FCC. We have rated this phone to operate at a maximumdistance with the qualification that the range depends upon theenvironment in which the telephone is used. Many factors limit range,and it would be impossible to include all the variables in our rating.The Maximum Range rating of this phone is meant to be used as ameans of comparison against other range claims.The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.EXI5160 7/22/03 4:54 PM Page 45
ADDITIONAL INFORMATION[ 46 ] www.uniden.comTelephone Line ProblemsThe FCC has granted the telephone company the right to disconnectservice in the event that your phone causes problems on the telephoneline. Also, the telephone company may make changes in facilities andservices which may affect the operation of your unit. However, yourtelephone company must give adequate notice in writing prior to suchactions to allow you time for making necessary arrangements tocontinue uninterrupted service.If you are having trouble with your telephone service, you must firstdisconnect your phone to determine if it is the cause of your problem.If you determine that it is the cause, you must leave it disconnecteduntil the trouble has been corrected.Radio InterferenceRadio interference may occasionally cause buzzing and humming in yourcordless handset, or clicking noises in the base. This interference iscaused by external sources such as TV, refrigerator, vacuum cleaner,fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check aroundyour home to see what appliances may be causing the problem. In addition, we recommend that the base not be plugged into a circuitthat also powers a major appliance because of the potential forinterference. Be certain that antenna on the unit is fully extended. In the unlikely event that you consistently hear other voices ordistracting transmissions on your phone, you may be receiving radiosignals from another cordless telephone or other source of interference.If you cannot eliminate this type of interference, you need to change toa different channel.Finally, it should be noted that some cordless telephones operate atfrequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordlesstelephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone fartheraway from the TV or VCR will often reduce or eliminate the interference.More Than One Cordless TelephoneIf you want to use more than one cordless telephone in your home,they must operate on different channels. Press the channel key to selecta channel that provides the clearest communication.Cordless Telephone PrivacyCordless telephones are radio devices. Communications between thehandset and base of your cordless telephone are accomplished by meansof radio waves which are broadcast over the open airways. Because ofthe inherent physical properties of radio waves, your communicationscan be received by radio receiving devices other than your own cordlesstelephone unit. Consequently, any communications using your cordlesstelephone may not be private.Installation ConsiderationsSelecting a LocationBefore choosing a location for your new phone, there are someimportant guidelines you should consider:• The location should be close to both a phone jack and continuouspower outlet. (A continuous power outlet is an AC outlet which doesnot have a switch to interrupt its power.)• Keep the base and handset away from sources of electrical noisesuch as motors or fluorescent lighting.• Be sure there is sufficient space to fully extend the base antenna.• The base can be placed on a desk or tabletop or mounted on astandard telephone wall plate.• You should charge your new phone for 15-20 hours beforecompleting the installation or using the handset.Telephone Line OutletsThere are two types of phone outlets:Modular JackMost phone equipment available now uses modular jacks. Phone cordsare fitted with a molded plastic connector which plugs into this type of jack. If you do not have modular phone jacks, contact your localtelephone company for information about their installation.Hardwired JackSome equipment is wired directly to a phone jack, and these types ofinstallations require a modular jack converter. This type of installationis not difficult; however, you should contact your Uniden telephonedealer or a telephone supply store for advice about the proper adapteror converter for your particular situation.Connecting the Telephone CordsConsider these safety guidelines before connecting the telephone cords:Caution!• Never install telephone wiring during a lightning storm.• Never touch uninsulated telephone wires or terminals unless thetelephone line has been disconnected.• Use caution when installing or modifying telephone lines.Applying Power to the BaseThis phone requires an AC outlet, without a switch to interrupt power,and the included AC adapter. To relieve strain on the DC plug when thephone is placed on a desk or table, wrap the power cord around thestrain relief notch on the back of the base.NOTE: Place the power cord so that it does not create a triphazard, or where it could become chafed and create afire or other electrical hazards.One Year Limited WarrantyImportant:Evidence of original purchase is required for warranty service.WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the originalretail owner, this Uniden Product to be free from defects in materialsand craftsmanship with only the limitations or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminateand be of no further effect 12 months after the date of original retailsale. The warranty is invalid if the Product is (A) damaged or notmaintained as reasonable or necessary, (B) modified, altered, or used aspart of any conversion kits, subassemblies, or any configurations notsold by Uniden, (C) improperly installed, (D) serviced or repaired bysomeone other than an authorized Uniden service center for a defect ormalfunction covered by this warranty, (E) used in any conjunction withequipment or parts or as part of any system not manufactured byUniden, or (F) installed or programmed by anyone other than asdetailed by the owner’s manual for this product.STATEMENT OF REMEDY: In the event that the product does not conformto this warranty at any time while this warranty is in effect, warrantorwill either, at its option, repair or replace the defective unit and returnit to you without charge for parts, service, or any other cost (exceptshipping and handling) incurred by warrantor or its representatives inconnection with the performance of this warranty. Warrantor, at itsoption, may replace the unit with a new or refurbished unit. THELIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIREWARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF ANDEXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THISWARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT ORPAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states donot allow this exclusion or limitation of incidental or consequentialdamages so the above limitation or exclusion may not apply to you.LEGAL REMEDIES: This warranty gives you specific legal rights, and youmay also have other rights which vary from state to state. This warrantyis void outside the United States of America and Canada.PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, afterfollowing the instructions in the owner’s manual you are certain thatthe Product is defective, pack the Product carefully (preferably in itsoriginal packaging). The Product should include all parts and accessoriesoriginally packaged with the Product. Include evidence of originalpurchase and a note describing the defect that has caused you to returnit. The Product should be shipped freight prepaid, by traceable means,to warrantor at:Uniden America CorporationParts and Service Division4700 Amon Carter Blvd. Fort Worth, TX 76155(800) 297-1023, 8 a.m. to 5 p.m. Central, Monday through FridayEXI5160 7/22/03 4:54 PM Page 46
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 47 ]www.uniden.comI.C. NoticeTERMINAL EQUIPMENTNOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.This is confirmed by the registration number. The abbreviation, IC, before the registration number signifiesthat registration was performed based on a Declaration of Conformity indicating that Industry Canadatechnical specifications were met. It does not imply that Industry Canada approved the equipment.NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipmentitself. The REN assigned to each terminal equipment provides an indication of the maximum number ofterminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer EquivalenceNumbers of all the devices does not exceed five.RADIO EQUIPMENTThe term “IC:” before the radio certification number only signifies that Industry Canada technicalspecifications were met.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this telephone”.EXI5160 7/22/03 4:54 PM Page 47
ADDITIONAL INFORMATION[ 48 ]IndexAAC adapter information ...................................... 44Adjusting ringer and earpiece volume.................... 19BBattery packInformation .................................................. 44Install .......................................................... 9Maintenance ............................................ 11, 40Preparing and charging .................................. 12Replacement and handling .............................. 40Beltclip installation .......................................... 39CCaller IDCaller ID service .............................................. 33Call Waiting .................................................. 21Deleting ...................................................... 35Setting Caller ID options ................................ 15Using .......................................................... 37Viewing........................................................ 34Channel .......................................................... 21Connection ...................................................... 12DDial mode........................................................ 16Digital security code ........................................ 39E, F, GEarpiece volume................................................ 19General information .......................................... 44HHeadset installation .......................................... 39I, J, K, LI.C. Notice ...................................................... 47Interference .................................................... 46Language ........................................................ 17M, N, OMaintenance .................................................... 40Making a call .................................................. 18Memory dialingEditing a stored nameand/or phone number .................................... 28Erasing a stored nameand phone number.......................................... 30Making calls with memory dialing...................... 26Storing phone numbers and names ........................................ 23Mounting on a wall .......................................... 13P, QPackage contents................................................ 3Paging ............................................................ 21Precautions...................................................... 45Quick reference guide .......................................... 3RReceiving a call................................................ 18Redialing a call .......................................... 18, 20Ringer tone and volume .................................... 19RocketDial ...................................................... 31SSetting menu options ........................................ 15Setting up the handset ........................................ 9Setting up the phone .......................................... 8T, U, V, W, X, Y, ZTechnical information ........................................ 44Troubleshooting ................................................ 41Voice mail waiting indicator................................ 22Warranty ........................................................ 46EXI5160 7/22/03 4:54 PM Page 48
MEMOEXI5160 7/22/03 4:54 PM Page 49
MEMOEXI5160 7/22/03 4:54 PM Page 50
At Uniden, we´ll take care of you!If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023or visit our web site at www.uniden.comPLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters.Thank you for purchasing a Uniden product.Hours: M-F 8:00 AM to 5:00 PM CST.For information on the accessibility features of this product, please call1-800-874-9314 (V/TTY)?AccessibilityEXI5160 7/22/03 4:54 PM Page 51
EXI5160 7/22/03 4:54 PM Page 52

Navigation menu