Uniden America UB370 SCANNING RECEIVER User Manual USERS MANUAL

Uniden America Corporation SCANNING RECEIVER USERS MANUAL

USERS MANUAL

BC125AT Owners ManualC 2011 Uniden America Corporation Printed in VietnamFort Worth, Texas U01UB370ZZZ(0)
PRECAUTIONSBefore you use this scanner, please read and observe the following.EARPHONE WARNING! Be sure to use only a monaural earphone with this scanner. You can also use an optional mono headset. Use of an incorrect earphone or mono headset might be potentially hazardous to your hearing. The output of the phone jack is monaural, but you will hear it in both headphones of a stereo headset.Set the volume to a comfortable audio level coming from the speaker before plugging in the monaural earphone or headset. Otherwise, you might experience some discomfort or possible hearing damage if the volume suddenly becomes too loud because of the volume control or squelch control setting. This might be particularly true of the type of earphone that is placed in the ear canal.WARNING!Uniden does not represent this unit to be waterproof. To reduce the risk of re or electrical shock, do not expose this unit to rain or moisture.Uniden® is a registered trademark of Uniden America Corporation. Close Call™ is a trademark of Uniden America Corporation.
CONTENTSTHE FCC WANTS YOU TO KNOW . . . . . . . . . . . . . . . . . . . . . . . . . 7SCANNING LEGALLY ............................................... 7INTRODUCTION .......................................10 FEATURE HIGHLIGHTS ............................................ 10FREQUENCY RANGE .............................................. 14INCLUDED WITH YOUR SCANNER .................................. 15OPTIONAL ACCESSORIES .......................................... 16SCANNING BASICS ....................................17WHAT IS SCANNING? .............................................. 17WHAT IS SEARCHING? ............................................. 17UNDERSTANDING SCANNING ..................................... 18What is CTCSS/DCS? ..............................................18Conventional Scanning ...........................................19Simplex Operation ...............................................20Repeater Operation ..............................................20UNDERSTANDING BANKS ......................................... 20Channel Storage Banks ...........................................20Service Search Banks .............................................21Custom Search Banks ............................................21WHERE TO LEARN MORE .......................................... 21SETTING UP YOUR SCANNER. . . . . . . . . . . . . . . . . . . . . . . . . . . 23CONNECTING THE ANTENNA ...................................... 23Connecting an Optional Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CONNECTING AN EARPHONE/HEADPHONE . . . . . . . . . . . . . . . . . . . . . . . . 24CONNECTING AN EXTENSION SPEAKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24ADJUSTING THE BELT CLIP ........................................ 24CONNECTING TO A COMPUTER .................................... 25POWERING THE SCANNER ......................................... 25Installing Non-Rechargeable Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Installing Rechargeable Ni-MH Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 26Charging the Ni-MH Batteries .....................................27ABOUT YOUR SCANNER ...............................28GETTING TO KNOW THE SCANNER ................................. 29TURNING ON THE SCANNER ....................................... 32SETTING UP YOUR SCANNER ...................................... 32
Using the SCROLL CONTROL Knob ...........................33Adjusting the Volume ............................................33Adjusting the Squelch ............................................34Setting the Backlight .............................................34Adjusting the Contrast ...........................................35Setting the Charging Timer .......................................36Using the Keypad Lock ...........................................37Setting the Beep Tone ............................................37Resetting the Scanner ............................................37CONTROLS, KEYS, AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37A LOOK AT THE DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41PROGRAMMING CHANNELS ...........................42PROGRAMMING CHANNEL TEXT TAGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44SETTING CTCSS/DCS FOR A CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44SETTING THE MODULATION FOR A CHANNEL . . . . . . . . . . . . . . . . . . . . . . 46SETTING THE PRIORITY CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46SETTING CHANNEL DELAY ........................................ 47DELETING CHANNELS ............................................. 48CLEARING A BANK ................................................ 48SCANNING STORED CHANNELS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Priority Scan Modes ..............................................51MANUALLY SELECTING A CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Locking Out Channels ............................................52Unlocking Channels ..............................................53Unlock all Channels in Banks Currently Enabled for Scan . . . . . . . . . . . 53SERVICE SEARCH MODE ........................................... 53Service Search Receive/Hold Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Custom Search Mode .............................................55Custom Search Receive/Hold Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Quick Search Mode ...............................................57Quick Search Receive/Hold Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Search Options ..................................................58Unlocking Search Frequencies ....................................61CLOSE CALL ...................................................... 62Using the Close Call Feature ......................................62Selecting Close Call Modes ........................................63Setting Close Call Options ........................................66WEATHER OPERATION .................................69
SEARCHING FOR A WEATHER BROADCAST . . . . . . . . . . . . . . . . . . . . . . . . . 69WEATHER ALERT STANDBY ........................................ 70WEATHER ALERT PRIORITY ........................................ 70REFERENCES ..........................................71CTCSS FREQUENCIES .............................................. 71DSC CODES ....................................................... 72
7THE FCC WANTS YOU TO KNOWThis scanner has been tested and found to comply with the limits for a scanning receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This scanner generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this scanner does cause harmful interference to radio or television reception, which can be determined by turning the scanner on and o, you are encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the scanner and the receiverThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.SCANNING LEGALLYYour scanner covers frequencies used by many dierent groups, including police and re departments, ambulance services, government agencies, private companies, amateur
8radio services, military operations, pager services, and wire-line (telephone and telegraph) service providers. It is legal to listen to almost every transmission your scanner can receive.However, there are some transmissions that you should never intentionally listen to. These include:• Telephone conversations (cellular, cordless, or other private means of telephone signal transmission)• Pager transmissions• Any scrambled or encrypted transmissionsAccording to the Electronic Communications Privacy Act (ECPA), you are subject to nes and possible imprisonment for intentionally listening to, using, or divulging the contents of such a conversation unless you have the consent of a party to the conversation (unless such activity is otherwise illegal). This scanner has been designed to prevent the reception of cellular telephone transmissions and the decoding of scrambled transmissions. This is done to comply with the legal requirement that scanners be manufactured so they are not easy to modify to pick up these transmissions. Do not open your scanner’s case to make any modications that could allow it to pick up transmissions that are illegal to monitor. Modifying or tampering with your scanner’s internal components or using it in a way other than as described in this manual could invalidate your warranty and void your FCC authorization to operate it.In some areas, mobile use of this scanner is unlawful or requires a permit. Check the laws in your area. It is also illegal in many areas (and a bad idea everywhere) to interfere with the duties of public safety ocials by traveling to the scene of an incident without authorization.
9Changes or modications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, could void your authority to operate this product.INTRODUCTIONThank you for purchasing a Uniden BC125AT Handheld Scanner. The scanner is versatile, compact, and easy to use. In addition to its standard scanning features, your scanner also includes Close Call™ RF capture technology designed to help you detect and identify strong local radio signals in your area. You can program up to 500 frequencies into the scanner's memory either manually or using optional computer software. The scanner lets you scan transmissions and is preprogrammed with service banks for your convenience. You can quickly search those frequencies most commonly used by police and other agencies, without tedious and complicated programming. The scanner gives you direct access to over 40,000 exciting frequencies. Use your scanner to monitor:• Police and re departments (including rescue and paramedics)• NOAA weather transmissions• Utilities• Marine and amateur (ham radio) bands• Air band• Itinerant Business/Industrial, GMRS, FRS bands• CB bands• Military and Federal Government bands
10 FEATURE HIGHLIGHTS10 Channel Storage Banks - You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.Close Call™ RF Capture Technology - you can set the scanner so it detects and provides information about nearby radio transmissionsClose Call Do-Not-Disturb - checks for Close Call activity in between channel reception so active channels are not interrupted.Close Call Temporary Store - temporarily stores and scans the last 10 Close Call hits in the Close Call Hits system.PC Programming - you can download information into the scanner and control the scanner via your personal computer.CTCSS and DCS Squelch Modes - rapid search for CTCSS/DCS tones/codes used during a transmission. You can identify up to 50 CTCSS tones and 104 DCS codes.Direct Access - lets you directly access any channel.Lock-Out Function - lets you set your scanner to skip over specied channels or frequencies when scanning or searching.Temporary Lockout - makes it easy to temporarily lock out any channel or frequency. The lockout is cleared when you turn power o, then back on so you don’t have to remember to unlock the channels later.Triple-Conversion Circuitry - virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.
11Text Tagging - you can name each channel, using up to 16 characters per name.Service Banks - frequencies are preset in 10 separate Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB Radio, FRS/GMRS/MURS, and Racing banks to make it easy to locate specic types of calls and search any or all of these banks.Priority Scan with Do Not Disturb - lets you program one channel in each bank (10 in all) and then have the scanner check each channel every 2 seconds while it scans the banks so you don’t miss transmissions on those channels. Do-Not Disturb keeps the scanner from interrupting transmissions during receiving.Priority Plus Scan - you can set the scanner so it scans only the priority channels.Scan/Search Delay/Resume - controls whether the scanner pauses at the end of the transmission to wait for a reply. You can set the Delay time for each Channel, Close Call Search, Custom Search, and Service search. You can also set a negative delay where the scanner stops on transmissions for a set time then automatically resumes.Custom Search - lets you program up to 10 Custom Search Ranges and search any or all of these ranges.Quick Search - allows you to enter a frequency and start searching up or down from that frequency.Turbo Search - increases the search speed from 100 to 300 steps per second automatically for bands with 5 kHz steps.Search Lockouts - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies
12in Custom Search, Service Search, Close Call Search, or Quick Search Modes.Weather Alert Priority - the scanner scans active WX channels every 5 seconds to check for the presence of a 1050 Hz Weather Alert Tone.Weather Alert Standby - the scanner allows you to monitor for weather alerts broadcast on NOAA channels.Display Backlight - You can turn on/o the LCD backlight, set it operate on squelch only, keypress only, or both. Signal Strength Meter - shows the signal strength for more powerful transmissions.Flexible Antenna with BNC Connector - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. You can also connect an external antenna for better reception.Memory Backup - keeps the frequencies stored in memory for an extended time if the scanner loses power.Two Power Options - let you power the scanner using the included two AA rechargeable or alkaline batteries or the supplied USB cable.Built-In Charger - allows you to charge Ni-MH batteries in the scanner using a USB port on any computer and the supplied USB cable.Key Conrmation Tones - You can turn on/o a tone that sounds when you perform an operation correctly or if you make an error.
13Key Lock - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.Battery Save - works when there is no transmission for 1 minute in Scan Hold mode and any Search Hold mode (without Priority Scan). This feature turns o RF power for 1 second and turns on it for 300ms to extend the battery life.Battery Low Alert - the icon will blink in the display and a tone warns you every 15 seconds when the battery power gets low.FREQUENCY RANGEThis table lists the frequency ranges, frequency steps, default modulation, and type of transmissions you can hear for each range.FREQUENCY MODE STEP (KHz) BandLOWER UPPER25.000 27.995 AM 5.0•Petroleum Products & Broadcast Pickup•CB Class D Channel•Business & Forest Products28.000 54.000 NFM 5.0•Meter Amateur Band•VHF Low Band•6 Meter Amateur Band108.000 136.9916 AM 8.33 Aircraft Band
14FREQUENCY MODE STEP (KHz) BandLOWER UPPER137.000 174.000 NFM 5.0•Military Land Mobile•2 Meter Amateur Band•Military Land Mobile•VHF High Band•Federal Government225.000 380.000 AM 12.5 •Military Air Band400.000 512.000 NFM 6.25•Miscellaneous•Federal Government Land Mobile•70 cm Amateur Band•UHF Standard Band•UHF TVINCLUDED WITH YOUR SCANNERBC125AT Antenna
15Ni-MH Rechargeable BatteriesUSB CableBelt Clip (Attached) HeadsetIf any of these items are missing or damaged, immediately contact your place of purchase or Uniden Customer Service at: (800) 297-1023, 8:00 AM to 5:00 PM, CST, Monday through Friday.OPTIONAL ACCESSORIESContact your local Uniden Dealer or call the Uniden Parts Center at: (800)554-3988, 8:00AM to 5:00PM EST, Monday through Friday, for information about ordering these optional accessories.[optional accessories graphic]Note: USB cables are available from the Uniden On-Line store. Visit http://www.uniden.com.
16SCANNING BASICSThis section provides you with background on how scanning works. You don’t really need to know all of this to use your scanner, but some background knowledge will help you get the most from your BC125AT.WHAT IS SCANNING?Unlike standard AM or FM radio stations, most two-way communications do not transmit continuously. Your BC125AT scans programmed channels until it nds an active frequency, then stops on that frequency and remains on that channel as long as the transmission continues. When the transmission ends, the scanning cycle resumes until the scanner receives another transmission.WHAT IS SEARCHING?The BC125AT can search for active frequencies. This is dierent from scanning because you are searching for frequencies that have not been programmed into the scanner. When you select frequency bands to search, the scanner searches for any active frequency within the lower and upper limits you specify. When the scanner nds an active frequency, it stops on that frequency as long as the transmission lasts. If you think the frequency is interesting, you can store it into one of the banks. If not, you can continue to search.
17UNDERSTANDING SCANNINGWhat is CTCSS/DCS?Your scanner can monitor systems using a Continuous Tone Coded Squelch System (CTCSS) and Digital Coded Squelch (DCS) system, which allows the squelch to open only when the tone you have programmed with a specic frequency is received along with a transmission.CTCSS and DCS are sub-audible tone signaling systems sometimes referred to as PL or DPL (Motorola’s trademarked terms for Private Line and Digital Private Line respectively). CTCSS and DCS are used only for FM signals and are usually associated with both amateur and commercial two-way frequencies. These systems make use of a special sub-audible tone that accompanies a transmitted signal.CTCSS and DCS are used for many purposes. In many cases, CTCSS and DCS are used to restrict access to a commercial repeater, so that only those units which transmit the correct tone along with their signal can “talk” to the repeater.CTCSS and DCS are also used in areas that receive interference where there are several stations with output frequencies close to each other. When this occurs, you might hear multiple communications on the same frequency. The stations might even interfere with each other to the point where it is impossible to clearly receive any of the stations. Your scanner can code each received frequency with a specic sub-audible CTCSS or DCS frequency or code. Then, when you receive multiple signals, you only hear the transmission with the CTCSS or DCS tone you programmed. If you do not receive the correct
18tone with a signal, the scanner’s squelch remains closed and you hear nothing.The tables showing the available CTCSS frequencies and DCS codes are found in the Reference Section of this manual.Conventional ScanningConventional scanning is a relatively simple concept. Each group of users in a conventional system is assigned a single frequency (for simplex systems) or two frequencies (for repeater systems). Any time one of them transmits, their transmission always goes out on the same frequency. Up until the late 1980’s this was the primary way that radio systems operated.Even today, there are many 2-way radio users who operate using a conventional system:• Aircraft• Amateur radio• FRS/GMRS users• Broadcast AM/FM/TV stations• Many business radio usersWhen you want to store a conventional system, all you need to know is the frequencies they operate on. When you are scanning a conventional system, the scanner stops very briey on each channel to see if there is activity. If there isn’t, the scanner quickly moves to the next channel. If there is, then the scanner pauses on the transmission until it is over.
19Simplex OperationSimplex systems use a single frequency for both transmit and receive. Most radios using this type of operation are limited to line-of-sight operation. This type of radio is frequently used at construction job sites, and with inexpensive consumer radios such as GMRS/FRS radios. The range is typically 1-8 miles, depending upon the terrain and many other factors.Repeater OperationRepeater systems use two frequencies: one transmits from the radio to a central repeater; the other transmits from the repeater to other radios in the system. With a repeater-based system, the repeater is located on top of a tall building or on a radio tower that provides great visibility to the area of operation.When a user transmits (on an input frequency), the signal is picked up by the repeater and retransmitted (on an output frequency). The user’s radios always listen for activity on the output frequency and transmit on the input frequency. Since the repeater is located very high, there is a very large line of sight. Typical repeater systems provide coverage out to about a 25-mile radius from the repeater location.UNDERSTANDING BANKSChannel Storage BanksTo make it easier to identify and select the channels you want to listen to, the 500 channels are divided into 10 channel storage banks containing 50 channels each. You could use each channel storage bank to group frequencies by department, location, area of interest, or any other way you prefer. You can listen to
20any or all of the banks by using the number keys to turn them on or o.Service Search BanksThe scanner is preprogrammed with many of the frequencies allocated to Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB radio, FRS/GMRS/MURS, and Racing services. There are 10 banks allocated for these searches that can be used just lik the chanel storage banks to search these frequencies in Service Search mode.Custom Search BanksCustom Search Banks let you program and search 10 custom search ranges. During custom search, the scanner starts searching with the lowest frequency in the search range you select to the highest frequency in the range. You can search any or all of these ranges by turning each search bank on or o just like channel storage banks in Search mode.WHERE TO LEARN MOREBy itself, this manual really only provides part of what you need to know to have fun scanning – how to program and use the scanner. The following internet sites will help you make a list of the agencies you want to listen to and look up the frequencies and systems used by those agencies.http://www.radioreference.com - the Internet's premier source for user-supported radio system information.http://www.bearcat1.com - frequency information from National Communications.
21http://sjallfoss.fcc.gov/General_Menu_Reports/index.cfm - conventional frequency information on le with the US Government.http://www.scannermaster.com - frequency resources and home of Police Call.You can also call them at 1 800 SCANNER (hours are from 9:00 a.m. to 5:30 p.m. Eastern Time Monday through Friday).These web sites are not aliated with Uniden Corporation.For more information about Uniden and our other products, visit http://www.uniden.com.
22SETTING UP YOUR SCANNERThese guidelines will help you install and use your new scanner.If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source. You might also try changing the height or angle of the telescoping antenna.To improve the scanner’s reception, use an optional external antenna designed for multiband coverage. (You can purchase this type of antenna at a local electronics store). If the optional antenna has no cable, use 50-70 ohm coaxial cable for lead-in. An adapter plug might be necessary for the optional antennas.Use an optional mono earphone or mono headset with proper impedance for private listening. Read the precautions on the inside front cover of this Owners Manual.Do not use the scanner in high-moisture environments such as the kitchen or bathroom.Avoid placing the scanner in direct sunlight or near heating elements or vents.CONNECTING THE ANTENNA1. Align the slots around the antenna's connector with the tabs on the scanner's BNC connector. 2. Slide the antenna's connector down over the scanner's connector. 3. Rotate the antenna connector's outer ring clockwise until it locks into place.
23Connecting an Optional AntennaThe scanner's BNC connector makes it easy to connect a variety of optional antennas, including an external mobile antenna or outdoor base station antenna.Note: Always use 50-ohm, RG-58, or RG-8, coaxial cable to connect an outdoor antenna. If the antenna is over 50 feet from the scanner, use RG-8 low-loss dielectric coaxial cable. If it is less than 50 feet, use RG-58. You can get a BNC adapter at local electronics stores.CONNECTING AN EARPHONE/HEADPHONEFor private listening, you can plug a 1/8-inch (3.5 mm) mini-plug earphone or mono headphones (not supplied) into the headphone jack on top of your scanner. This automatically disconnects the internal speaker.CONNECTING AN EXTENSION SPEAKERIn a noisy area, an optional extension speaker, positioned in the right place, might provide more comfortable listening. Plug the speaker cable's 1/8-inch (3.5-mm) mini-plug into your scanner's jack.WARNING! If you connect an external speaker to the scanner's headphone jack, never connect the audio output line to a power supply and ground. This might damage the scanner.ADJUSTING THE BELT CLIPThe factory-attached belt clip makes it easier to carry the scanner. Use a Phillips screwdriver to adjust (loosen) the mounting screws or remove the belt clip completely.
24POWERING THE SCANNERYou can power the scanner using alkeline (ALK) non-rechargeable batteries (not supplied) or the included Nickel Metal-Hydride (Ni-MH) rechargeable batteries. (Uniden provides a USB cable to charge the Ni-MH batteries on initial installation and to recharge them through your computer.)Inside the battery compartment is a switch to set the unit to either ALK or Ni-MH. WARNING! Non-rechargeable batteries can get hot or burst if you try to recharge them.CAUTIONS:• When ashes in the display and the scanner beeps every 15 seconds, replace both batteries.• Use only fresh batteries of the required size and recommended type.• Always remove old or weak batteries. Batteries can leak chemicals that destroy electronic circuits.• Do not mix old and new batteries, dierent types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of dierent capacities.Installing Non-Rechargeable Batteries1. Make sure the power is turned o.2. Slide the battery compartment cover o.3. Use a pointed object such as a ballpoint pen to set the battery selection switch inside the compartment to ALK.
254. Insert the batteries as indicated by the polarity symbols (+ and -) marked inside the battery compartment.5. Replace the battery compartment cover. Installing Rechargeable Ni-MH BatteriesYou can also use two Ni-MH rechargeable batteries to power your scanner. The Ni-MH batteries included with your unit are not fully charged; you must charge them completely after you install them into your scanner. See Using the USB Cable, page ___, for details.1. Make sure the power is turned o.2. Slide the battery compartment cover o.3. Use a pointed object such as a ballpoint pen to set the battery selection switch inside the compartment to NIMH for Nickel Metal-Hydride batteries.4. Install two batteries in the compartment as indicated by the polarity symbols (+ and -) marked inside and replace the cover.Notes:• To prevent damage to Ni-MH batteries, never charge them in an area where the temperature is above 113°F (45°C) or below 40°F (4°C).• For longer operation, you can get higher capacity Ni-MH batteries at your local electronics store. This type of battery takes longer to recharge.
26Charging the Ni-MH BatteriesThe scanner has a built-in circuit that charges the included Ni-MH batteries when a USB cable connects it to a computer. Verify that the battery selection swith is set to NIMH and that only Ni-MH rechargeable batteries are inserted in the scanner before connecting it to your computer.CAUTION: Never attempt to charge non-rechargeable batteries or install non-rechargeable batteries when the battery selection switch is set to Ni-MH. 1. Connect the included USB cable to the scanner’s USB port.2. Connect the other end of the USB cable to the computer's USB port. 3. The scanner displays Charging while it charges the batteries and Charge Complete when the Ni-MH batteries are completely charged.Dierent status messages may display depending on the battery type and scanner status:USB Message Battery Type Scanner Cond.CHARGING Ni-MH OffNo batteries None OffCharge Off ALK, Rechargeable OffBattery Error Non-Rechargeable OffIllegal Voltage Unchargeable OffBattery icon blinks Ni-MH, unknown cond. OnSee also Setting the Charging Timer on page ___.
27If the batteries are good, the scanner charges the batteries. and it operates ordinarily. If the scanner cannot immediately determine if the batteries to be good, it checks them and displays the battery icon. If the scanner judges the batteries as a good, the scanner starts charging and the battery icon disappears. If it cannot regard the batteries as good in 60 seconds, the scanner stops checking and the battery icon blinks.ABOUT YOUR SCANNERWe use a few simple terms in this manual to explain the features of the scanner. Familiarize yourself with these terms and the scanner's features, and you can put the scanner to work for you right away. Simply determine the type of communications you want to receive, then set the scanner to search those communications.A frequency, expressed in kHz or MHz, is the tuning location of a station. To nd active frequencies, you use the search function or refer to a frequency reference.Besides searching within a selected frequency range, you can also search your scanner's service banks. Service banks are preset groups of frequencies categorized by the type of services that use those frequencies. For example, many amateur radio frequencies are located in the HAM service bank.When you search and nd a desired frequency, you can store it into a programmable memory location called a channel. Channels are grouped into channel storage banks. The scanner has 10 channel storage banks and each bank has 50 channels.
28You can scan the channel storage banks to see if there is activity on the frequencies stored there.GETTING TO KNOW THE SCANNERIf your scanner's keys seem confusing at rst, the following information should help you understand each key's function.Your scanner's keys have various functions labeled on the key tops and below the keys. The keys operate in Normal mode and Function mode. Pressing Func puts the scanner into Function mode for 3 seconds and then returns to Normal mode. The scanner displays F . During that 3 seconds you can press other keys and operate that function. Pressing Func again before 3 seconds returns to Normal mode and the F icon disappears. In Normal mode the F icon is not displayed.HEADSET JACKANTENNAHOLD/CLOSE CALLSCANSEARCH/SERVICE SEARCHLOCK OUT/KEY LOCKPOWER/BACKLIGHTPROGRAM/ENTERFUNCTIONDECIMAL/CLEARWEATHERPRIORITYBEEPCURSER LEFT/RIGHTSCROLL CONTROLUSB PORT
29Key/IconPress to... Press Func and this key to...1/PRI Enter 1. Enter the Priority menu.3/WX Enter 3. Enter the Weather menu.6/> Enter 6. Scroll right.. Clr •Enter a decimal point.•Input a space in a text string.Clear a digit.func •Enter Function mode for 3 seconds.•Return to Normal mode from Function mode.NAHold/ •Hold on a current channel.•Release hold and resume scanning.•Monitor an unprogrammed frequency after you have entered it.•Access a channel directly after you have entered it.Open the Close Call menu.Scan Enter or resume Scan mode. NASrch/SvcResume searching. Start Service Search.
30Key/IconPress to... Press Func and this key to...L/O/ •Temporarily lock out a channel or search frequency (press once).•Permenantly lock out a channel or search frequency (press twice).•Unlock alllocked out settings of the current channel bank (press and hold).Lock or unlock the keypad. / •Turn scanner on and o (press and hold).•Turn backlight on and o.Enter Backlight Options menu.Pgm/E •Select input data or a menu item.•Access a channel through its channel number.•Enter Channel Programming menu.•Quickly save frequencies in various modes.4/< Enter 4. Scroll left.7/Beep Enter 7. Enter Keybeep menu.Note: Turn SCROLL CONTROL to scroll up and down through menu selections.
31TURNING ON THE SCANNERNote: Make sure the scanner's antenna is connected before you turn it on.1. Press and hold for 1 second to turn on the scanner. The opening screen displays, followed by the copyright notice.2. If the scanner is new or has been reset, the default mode is Scan Hold with all banks enabled and Close Call Do-Not-Disturb active. Otherwise, the scanner displays the last mode the scanner was in before it was powered down.A LOOK AT THE DISPLAY The display has indicators that show the scanner's current operating status. The display information helps you understand how your scanner operates.Note: Not all of these icons may appear at the same time.
32Item Meaning1•Channel Name in Receive/Scan Hold mode.•Custom/Service Search Bank Name.•Quick Search in Quick Search mode.•Close Call Hits in Receive/Scan Hold mode.•Close Call in Close Call Only mode.•WX Scan in Weather Scan mode.2•“Scanning," “Searching," or “CC Search” scroll.•Channel Number and Frequency.•Searching Frequency.3P identies a Priority channel.4•BNK/SVC/LMT/BND shows banks/bands enabled for scan/search/Close Call Only mode.• C is for the Close Call Hits bank.5 AM/FM/NFM shows channel/frequency modulation.6•PRI indicates Priority Scan.• PRI indicates Priority Do-Not-Disturb.•PRI+ indicates Priority Plus Scan.7 Shows any CTCSS/DCS tone/code received.8 indicates the key lock is enabled.9• indicates Close Call Priority.• indicates Close Call Do-not-Disturb.10 ↑or ↓ indicates the scan/search direction.11 indicates the batteries are low.12 indicates the signal strength.
33Item Meaning13 WX indicates Weather Priority is on.14 •TL/O indicates temporary lock out.•L/O indicates permanent lock out.15 • indicates mode type (Function or Normal).16 Indicates Function mode.SETTING UP YOUR SCANNERWhen you turn on your scanner for the rst time, you can set your screen display preferences as well as other elements such as squelch levels, volumes, brightness, etc. Using the SCROLL CONTROL KnobTurn the SCROLL CONTROL knob on top of the BC125AT to:• Select channels • Adjust volume• Adjust squelch• Set display settings• Selects characters for text tagging• Scroll up or down through menu options• Change channels/frequencies in Hold mode• Resume scanningPress the SCROLL CONTROL knob to select a setting.Note: Pressing Scroll Control is the same as pressing Pgm/E on the keypad in Menu mode.
34Adjusting the Volume1. Press SCROLL CONTROL; The volume level indicator and battery voltage display.2. Turn SCROLL CONTROL to adjust the volume level from 0 to 15.3. Push SCROLL CONTROL to set the volume.4. To exit Volume Level mode, push SCROLL CONTROL again or wait 10 seconds to return to the previous mode.Adjusting the SquelchTo adjust the squelch level, press FUNC, then push SCROLL CONTROL. When the squelch level indicator and battery voltage appear, turn SCROLL CONTROL to change the squelch level from 0 to 15.1. Press Func, then push SCROLL CONTROL. The squelch level indicator and battery voltage appears.2. Turn SCROLL CONTROL until the audio mutes. If the scanner picks up unwanted partial signals or very weak transmissions, increase the Squelch setting to decrease the scanner's sensitivity. To listen to a weak or distant station, decrease the Squelch setting.3. Press SCROLL CONTROL to set the desired level and return to the previous mode. 4. To exit Squelch mode without resetting squelch, wait 10 seconds to return to the previous mode.Setting the BacklightPress to turn on the backlight on and o.
351. Press Func and to view the Display/Charge menu. 2. From this menu, scroll to Set Backlight from the submenus. Press SCROLL CONTROL.3. Scroll to select one of the following settings:• Always O - Backlight is always o.• Always On – Backlight is always on.• On with Squelch - Backlight is on while squelch is open and until delay expires.• On with Keypress - Backlight is on for 10 seconds after any key is pressed.• Keypress+Squelch – Both above-mentioned "Squelch" and "Keypress."• Back - Return to previous menu.4. Press Pgm/E (pr press SCROLL CONTROL) to save and return to the previous menu. (Default = Always O ) 5. Press . Clr to exit.Notes: If the backlight is set to Always On when is pressed, the backlight is turned o and the backlight setting is then set to Always Off.If the backlight is set to Always Off when is pressed, the backlight is turned on and the backlight setting is then set to Always On.
36Adjusting the ContrastThis submenu of the Display/Charge menu controls the display’s contrast (how light or dark it appears) for dierent viewing conditions. There are 15 contrast settings. You see the contrast change as you scroll through the settings.1. To adjust the contrast, press Func then ; the Display/Charge menu displays 2. Scroll to Set Contrast and press Pgm/E.3. Scroll to see the contrast settings.4. When you have selected a setting, press Pgm/E to set it and return to the previous menu.5. Press . Clr to exit.Setting the Charging TimerThe Charging Timer menu is also a submenu of the Display/Charge menu. It sets how long the scanner will charge the batteries when you plug the supplied USB cable into a USB port and connect it to your scanner.WARNING: The Charging Timer will reset to the set charging time every time you plug the USB cable into the scanner or charge the batteries while the USB cable is connected.1. To set the Charging Timer press Func then to view the Display/Charge menu. 2. Scroll to Set ChargeTime and press Pgm/E.
373. Scroll to 1-16 (hours) (default = 14 hours) and press Pgm/E to save and return to the previous menu. Suggested maximum charging time for Ni-MH batteries:1500mAh 9 hours1800mAh 11 hours2000mAh 12 hours2100mAh 13 hours2200mAh 13 hours2300mAh 14 hours2500mAh 15 hours2700mAh 16 hoursNote: The batteries will take longer to charge when the scanner is in use. 4. Press . Clr to exit.Using the Keypad LockUse the scanner's keypad lock to protect it from accidental program changes. When the keypad is locked, only Func, Hold, , , and SCROLL CONTROL (volume only) operate.Press Func then L/O to toggle the keypad lock on and o. The scanner displays Keypad Lock On or Keypad Lock Off.Setting the Beep TonePress Func then Beep/7 (Default = ON) to toggle the keypress conrmation tone on or o.
38Resetting the ScannerWARNING: Resetting the scanner clears all data and settings you have entered. You cannot restore user programmed data that has been deleted. You can, at a last step, restore only the original factory data.1. Press and hold the 2, 9, and Hold keys and turn on the scanner.2. The scanner clears all data and returns to the initial setting. All Memory Cleared displays.CONTROLS, KEYS, AND FUNCTIONSNow that you have congured your scanner, you are ready to start using your scanner’s preprogrammed service banks, the custom search banks, the Close Call feature, or the Weather Scan/Alert feature. You can also program your channel memories or re-program your 10 custom search bank memories.PROGRAMMING CHANNELSBefore the scanner can begin scanning, you must program a frequency into at least one channel.1. To select a channel, press Hold then enter the channel number. 2. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)Note: Turning SCROLL CONTROL in Function mode will allow you to select the rst channel in each bank.
39You can quickly store frequencies in Scan Hold mode by entering the frequency and pressing Pgm/E.1. Scroll to select Enter Frequency and press Pgm/E. You will see the channel number and currently programmed frequency. To return, press . Clr.2. Use number keys and . Clr for a decimal to enter the frequency. If you make a mistake, press . Clr to clear the display. Press Pgm/E to store the frequency and return to the Channel menu.Notes:• The scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475.• If you entered an invalid frequency, Out of Band appears and the scanner beeps three times. Press . Clr and enter a valid frequency.• If you enter a frequency that has already been entered elsewhere, the scanner displays the channel number and Frequency Exists – Conrm? appears.• If you entered the frequency by mistake, press . Clr then enter the correct frequency. To enter the frequency anyway, press Pgm/E to accept. The smallest channel is displayed when two or more duplication channels exist.
40PROGRAMMING CHANNEL TEXT TAGSYou can customize your channels by programming text tags (up to 16 characters in length) for easier channel frequency identication. The default tag is the bank number followed by the channel number in the bank.1. To select a channel, press Hold and then enter the channel number.2. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)3. Scroll to select Edit Tag and press Pgm/E.4. Turn SCROLL CONTROL to choose the characters, pressing > or < to move the cursor to the right or left. If you make a mistake, press . CLR to clear the last character. Press . CLR twice to clear all characters. To cancel and exit, press L/O.5. Press Pgm/E to save the tag and return to the Channel menu.SETTING CTCSS/DCS FOR A CHANNELYou can store a CTCSS tone or DCS code, set the scanner to search for tones/codes, have the scanner open squelch on any tone/code, or have the squelch only open if no CTCSS/DCS is detected for any channel. (Default = O)1. To select a channel, press Hold and then enter the channel number.
412. Press Pgm/E to enter the Channel menu. (You can also press HOLD and scroll to the channel; press Func then Pgm/E.)3. Scroll to select Set CTCSS/DCS and press Pgm/E.4. Scroll to select one of the following options:• Off - the scanner ignores all tones and opens squelch on any signal• CTCSS - the scanner prompts the user for the appropriate setting. Squelch will open for this channel only if the code matches.• DCS - the scanner prompts the user for the appropriate setting. Squelch will open for this channel only if the code matches.• CTCSS/DCS Search - the scanner displays any tone being used, but opens squelch on any signal.• No Tone - indicates that the channel squelch will only open if no CTCSS/DCS is detected.• Back - returns to Channel Menu.Note: If you select Off, CTCSS/DCS Search, or No Tone, the scanner returns to the channel menu.If you selected CTCSS or DCS, you can then select the CTCSS tone or DCS code.5. Scroll to select, then press Pgm/E to save and return to the Channel menu.
42SETTING CHANNEL MODULATION1. To select a channel, press Hold and then enter the channel number.2. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)3. Scroll to select Set Modulation and press Pgm/E.4. Scroll to select modulation from the following options (Default = Auto):• Auto - the scanner selects the modulation automatically for the frequency’s band.• AM - the scanner uses AM modulation.• NFM - the scanner uses Narrowband FM modulation.• FM - the scanner uses FM modulation.5. Press Pgm/E to save and return to the Channel menu.SETTING THE PRIORITY CHANNELThe Priority feature lets you scan through the channels and still not miss important or interesting calls on specic channels. You can set one stored channel in each bank as a priority channel.If the Priority feature is turned on, as the scanner scans the bank, it checks that bank's priority channel for activity every 2 seconds.To Set a Priority Channel in a Bank1. To select a channel, press Hold then enter the channel number
432. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)3. Scroll to select Set Priority and press Pgm/E.4. Scroll to Priority On and press Pgm/E to save and return to the Channel Menu. 5. P displays to identify a Priority channel.SETTING CHANNEL DELAYThis setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. If you select a minus delay time, the scanner stops on the transmission for the setting time, then automatically resumes scanning. (Default = 2 seconds)1. To select a channel, press Hold then enter the channel number.2. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)3. Scroll to select Set Delay and press Pgm/E.4. Scroll to select the delay time from the following options:• -10 sec - resumes after 10 seconds.• -5 sec - resumes after 5 seconds.• 0 sec - resumes immediately.• 1 sec - waits 1 second for a reply then resumes.• 2 sec - waits 2 seconds for a reply then resumes.
44• 3 sec - waits 3 seconds for a reply then resumes. • 4 sec - waits 4 seconds for a reply then resumes.• 5 sec - waits 5 seconds for a reply then resumes.4. Press Pgm/E to save and return to the Channel menu.DELETING CHANNELSYou can delete all programming for a channel.1. To select a channel, press Hold then enter the channel number.2. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)3. Scroll to select Delete Channel and press Pgm/E.[conrm delete channel graphic]4. At Conrm Delete?, press Pgm/E to delete the channel or .Clr to cancel and return to the Channel menu.Clearing a BankYou can delete all channels in a bank.1. Press Hold to select any channel in the bank, then enter that channel number. 2. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)3. Scroll to select Clear Bank and press Pgm/E.
454. To clear the Close Call Hits bank, turn o the scanner and turn it back on.5. At Conrm Clear?, press Pgm/E to clear the bank or . Clr to cancel and return to the Channel menu.SCANNING STORED CHANNELSPress Scan to begin scanning channels.The scanner scans through all unlocked channels in the enabled banks in channel order. When the scanner nds a transmission, it stops on it. When the scanning of all normal banks ends, the scanner scans a channel storage bank that is named Close Call Hits (if enabled). This is a storage bank that automatically stores found frequencies with any Close Call mode. You will see Close Call Hits on the display. If the Close Call Hits bank is empty, the scanner does not scan this bank.In Scan mode, the upper line displays the current channel bank number and the lower line displays and scrolls SCANNING from right to left with the direction indicator (↑or ↓).Enabled scan banks appear on the lowest line. Disabled scan bank numbers are not displayed. The currently scanned bank number ashes.• You can turn scan banks on/o by pressing 1-9 or 0, but one scan bank must always be enabled. If you turn o all scan banks, the scanner will display Nothing to Scan.• If you want to change the search direction or if it is a long transmission and you want to continue scanning, turn the SCROLL CONTROL or press Scan.
46When the scanner nds a transmission, it stops on it. When the transmission ends, the scanner resumes scanning according to the delay setting for each channel.• To hold on a channel, press Hold. • To step through the channels, turn the SCROLL CONTROL in Hold mode. Press Hold to resume.[scan hold mode graphic]While monitoring a transmission, the upper line displays the current bank and bank channel number (or name if tagged) and the lower line displays the channel number in the scanner and frequency with the direction indicator (↑or ↓).[monitoring a transmission graphic] P will appear in the display if it is a priority channel. The modulation, Priority mode icon (if Priority is enabled), and the Close Call icon (if CC Pri or CC-DND is enabled) will also display.Any CTCSS/DCS received will blink in CTCSS/DCS search and appear solid if programmed.Numbers at the bottom of the display show the selected scan banks. The currently scanned bank number ashes in Receive mode.• To temporarily lock out a channel, press L/O.• To permanently lock out a channel, press L/O twice quickly.See also Locking Out Channels on page ___.
47Priority Scan ModesThis scanner allows four dierent Priority modes. These modes also function in Search and Hold modes (except Close Call Only mode and Weather modes). (Default = O)In Scan or Search pode, Press Func then Pri/1 to view the Priority menu.Scroll to select one of the following options:• Priority O - does not check for priority channels.• Priority Scan - checks Priority channels every 2 seconds. If you set mode to Priority Scan, the scanner turns on the PRI icon during scanning or searching.• Priority DND - checks Priority channels every 2 seconds only when not receiving. If you set Priority mode to Priority DND, the scanner turns on the PRID icon during scanning or searching.• Priority Plus - scans only Priority channels in enabled banks. If you set Priority mode to Priority Plus, the scanner turns on the PRI+ icon during scanning or searching.• Exit - Return to previous mode.Note: If no Priority channels are enabled for scan, you will see Priority Scan No Channel in the display and Priority mode is set to O.MANUALLY SELECTING A CHANNELYou can continuously monitor a single channel without scanning. This is useful if you hear an emergency broadcast on a channel or if you want to monitor a specic channel.
481. To manually select a channel, press Hold and enter the channel number.2. Press Hold again.Locking Out ChannelsYou can increase the scanning speed by locking out channels that have a continuous transmission such as a weather channel.While receiving a channel or while in Scan Hold mode, press L/O once to temporarily lock out the channel. Temporary L/O and TL/O briey appear in the display. Turning the scanner o clears the temporary lockout.Press L/O twice quickly to permanently lock out the channel. Locked Out and L/O briey appear in the display. Turning the scanner o will NOT clear the lockout.If you lock out a channel in Scan mode, the scanner will resume scanning from the next channel.To Lock Out a Specic Channel 1. Press Hold. 2. Enter the channel number you want to lock out and press Hold again. (You can also press Hold and scroll to the channel.)3. Press L/O once to temporarily lockout or press L/O twice quickly to permanently lock out the channel. Note: You can still manually select locked-out channels. If you lock out all channels in the selected bank, the scanner displays All Locked! on the second line.
49Unlocking Channels1. Press Hold.2. Enter the channel number you want to unlock and press Hold again. (You can also press Hold and scroll to the channel.)3. Press L/O. L/O (or TL/O) disappears.Unlock all Channels in Banks Currently Enabled for Scan1. Press Hold to stop scanning.2. Press and hold L/O until Conrm Unlock All Channels? appears in the display. 3. Press Pgm/E to unlock all or . Clr to cancel.SERVICE SEARCH MODEIf you do not have a reference to frequencies in your area, use a search to nd a transmission. You can search for Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB Radio, FRS/GMRS/MURS, and Racing frequencies without knowing the specic frequencies used in your area. The scanner is preprogrammed with all the frequencies allocated to these services.To start a Service Search, press Func then Srch/Svc. When the scanner nds a transmission, it stops on it. When the transmission ends, the scanner resumes searching according to the delay setting (see page ___).During a Service Search, the upper line displays the current service name. The lower line displays the search frequency and the direction indicator (↑or ↓) with the modulation.
50Enabled service banks appear on the lowest line. Disabled service bank numbers are not displayed. The currently searched bank number ashes. You can turn service banks on/o by using 1-9 or 0; however, one service bank must always be enabled. If you turn o all service banks, the scanner will display Nothing to Srch.If you want to change the search direction or if it is a long transmission and you want to continue searching, turn the SCROLL CONTROL or press Func then Srch/Svc.Service Search Receive/Hold ModesTo hold on a frequency, press Hold. To step through the frequencies, turn SCROLL CONTROL while in Hold mode. Press Hold to resume.While monitoring a transmission, the upper line displays the current service bank name and the lower line displays the channel name (if dened) and current frequency with the direction indicator (↑or ↓). The modulation, Priority mode icon (if Priority is enabled), any CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or CC-DND is enabled) will also appear in the display.Numbers at the bottom of the display show the enabled service search banks. The currently searched bank number ashes in Receive mode.To store a frequency, press Pgm/E. (see Storing Found Search Frequencies on page ____.)To temporarily lock out a frequency, press L/O.To permanently lock out a frequency, press L/O twice quickly.
51See also Search Options on page ____ for Delay, CTCSS/DCS settings, and locking out/reviewing/unlocking frequencies.Custom Search ModeCustom Search mode lets you program and search 10 custom search ranges. You can search any of these ranges simultaneously and reprogram each custom search range. During custom search, the scanner searches starting with the lowest frequency in the search range you select to the highest frequency in the range.This feature lets you search through the preset frequency ranges. (See also Programming Custom Search Ranges, page ___). The preset frequency ranges are:Bank No. Frequency (MHz) Step (kHz)1 25.0000-27.9950 5.002 28.0000-29.6950 5.003 29.7000-49.9950 5.004 50.0000-54.0000 5.005 108.0000-136.9916 8.336 137.0000-143.9950 5.007 144.0000-147.9950 5.008 225.0000-380.000 12.509 406.0000-449.99375 6.2510 450.0000-469.99375 6.25To start a Custom Search, press Srch/Svc. When the scanner nds a transmission, it stops on it. When the transmission ends, the scanner resumes searching according to the delay setting.
52While searching, the upper line displays the current search bank name. The lower line displays the search frequency and the direction indicator (↑or ↓) with the modulation.Enabled search banks appear on the lowest line. Disabled search bank numbers are not displayed. The currently searched bank number ashes. • You can turn search banks on/o by using 1-9 or 0. One search bank must always be enabled. If you turn o all search banks, the scanner will display Nothing to Srch.• If you want to change the search direction or if it is a long transmission and you want to continue searching, turn SCROLL CONTROL or press Srch/Svc.Custom Search Receive/Hold ModesTo hold on a frequency, press Hold. To step through the frequencies, turn SCROLL CONTROL in Hold mode. Press Hold to resume searching.While monitoring a transmission, the upper line displays the current search bank name and the lower line displays the current frequency with the direction indicator (↑or ↓)The modulation, Priority mode icon (if priority is enabled), any CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or CC-DND is enabled) will also appear in the display. Numbers at the bottom of the display show the enabled service search banks. The currently searched bank number ashes in Receive mode. • To store a frequency, press Pgm/E; see Storing Found Search Frequencies on page ___.
53• To temporarily lock out a frequency, press L/O.• To permanently lock out a frequency, press L/O twice quickly.See also Search Options on page ___ for Delay, CTC/DCS settings, and locking out/reviewing/unlocking frequencies.Quick Search ModeQuick Search mode allows you to enter a frequency and start searching up or down from that frequency from any Hold mode (except Close Call Only/Weather Hold). To start a Quick Search in Scan or Search mode, press Hold to hold on any channel or frequency. Enter the new frequency (include a decimal point so you don’t go to a channel) and press Hold again to set the frequency.At Quick Search, press Hold to start searching.To start a Quick Search at the current frequency during Close Call Search, turn SCROLL CONTROL in Hold mode and press Hold to start searching.When the scanner nds a transmission, it stops on it. When the transmission ends, the scanner resumes searching according to the delay setting. While searching in Quick Search mode, the upper line displays Quick Search and the lower line displays the searching frequency and the direction indicator (↑or ↓) with the modulation.If you want to change the search direction or if it is a long transmission and you want to continue searching, turn SCROLL CONTROL or press Srch/Svc.
54Quick Search Receive/Hold ModesTo hold on a frequency press Hold. To step through the frequencies, turn SCROLL CONTROL in Hold mode. Press Hold to resume. While monitoring a transmission, the upper line displays Quick Search and the lower line displays the current frequency and the direction indicator (↑or ↓). The modulation, Priority mode icon (if Priority is enabled), any CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or CC-DND is enabled) will also appear in the display. • To store a frequency, press Pgm/E. Refer to Storing Found Search Frequencies on page ____.• To temporarily lock out a frequency, press L/O.• To permanently lock out a frequency, press L/O twice quickly.• To exit Quick Search, press Scan.See also Search Options on page ___ for Delay, CTCSS/DCS settings, and locking out/reviewing/unlocking frequencies.Search OptionsSearch DelayThis setting controls how many seconds the scanner waits after a transmission ends before resuming searching. If you select a minus delay time, the scanner stops on the transmission for the setting time and then automatically resumes scanning. (Default = 2 seconds)1. Press Func then Pgm/E in Service, Custom, or Quick Search/Search Hold mode to view the Search menu.
552. Scroll to Set Delay and press Pgm/E.3. Scroll to select the delay time from the following options:• -10 sec - resumes after 10 seconds.• -5 sec - resumes after 5 seconds.• 0 sec - resumes immediately.• 1 sec - waits 1 second for a reply then resumes.• 2 sec - waits 2 seconds for a reply then resumes.• 3 sec - waits 3 seconds for a reply then resumes.• 4 sec - waits 4 seconds for a reply then resumes. • 5 sec - waits 5 seconds for a reply then resumes. 4. Press Pgm/E to save and return to previous menu.CTCSS/DCS Search This setting controls whether the scanner will search for a subaudible tone when it stops on a transmission during a Service Search. (Default = On)1. Press Func then Pgm/E in any Service, Custom, or Quick Search/Search Hold mode to view the Search menu.2. Scroll to CTCSS/DCS Search and press Pgm/E.3. Scroll to select one of the following settings:• Search O• Search On4. Press Pgm/E to save and return to previous menu.Programming Custom Search RangesYou can dene each search range used during a Custom Search.
561. Press Func then Pgm/E in Custom Search mode to view the Search menu.2. Scroll to Program Limits and press Pgm/E.3. Scroll to Search Bank 1-10 and press Pgm/E. You will see the previously programmed lower frequency. At Lower, press Pgm/E and use the keypad to enter the lower limit frequency then press Pgm/E.4. Scroll to Upper and press Pgm/E. You will see the previously programmed upper frequency. Use the keypad to enter the upper limit frequency then press Pgm/E. 5. Press . Clr to return to the Select Bank menu. Repeat for each custom search bank you want to reprogram then press Srch/Svc to start searching.Storing Found Search FrequenciesYou can store found frequencies into the channel storage banks in any Search mode, any Close Call mode, or Weather Scan mode.• To store a frequency, press Pgm/E.• To store a frequency in the Close Call Hits bank to a Channel Storage Bank in Scan mode, press Func then Pgm/E.Save Frequency displays and the scanner shows the rst empty channel location. To select another location, turn SCROLL CONTROL to select another channel then press Pgm/E to store the frequency or . Clr to exit and return.The scanner saves the frequency to the channel location and brings you to the channel menu for the channel so you can customize the channel options.
57Scroll to to any channel options desired to edit. (See Programming Channels, page ___).Locking Out Search FrequenciesYou can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies.While receiving a frequency in any Search or Search Hold mode, press L/O once to temporarily lock out the frequency. Temporary L/O and TL/O briey appears in the display. When the scanner is turned o, the temporary lockout is cleared.Press L/O twice quickly to permanently lock out the frequency. Locked Out and L/O briey appear in the display. When the scanner is turned o, the lockout is not cleared.If you lock out a frequency in Search mode, the scanner will resume searching from the next frequency.Notes:• Any frequency locked out in one Search mode will also be locked out in all Service, Custom, Quick, and Close Call Search modes.• You can still manually select locked-out frequencies.• If you lock out all frequencies in the selected search bank, the scanner displays All Locked! on the second line.Unlocking Search Frequencies1. Press Func then Pgm/E in any Search or Search Hold mode to view the Search menu.2. Scroll to Review Lockouts and press Pgm/E.
583. Scroll to view the locked out frequencies. L/O will indicate a permanent lockout and TL/O will indicate a temporary lockout. Press the L/O button to unlock any selected frequency.To unlock all Search/Close Call frequencies, press and hold L/O in any Search Hold mode until the scanner prompts Clear All L/O.To unlock all search/Close Call frequencies, press and hold L/O until the scanner prompts Clear All L/O? Press Pgm/E to conrm or .Clr to cancel.Press . Clr to resume Searching.CLOSE CALLUsing the Close Call FeatureUnlike searching, which requires the scanner to tune to a frequency to check for a transmission, Close Call RF capture directly detects the presence of a strong, nearby signal and instantly tunes to the source’s frequency.Close Call RF capture works great for nding frequencies at venues such as malls and sporting events. You can set the scanner so Close Call detection works "in the background" while you are scanning other frequencies, turn o normal scanning while Close Call is working, or turn o the Close Call feature and use the scanner normally. You can set the scanner so it alerts you when the Close Call feature detects a frequency. You can also set the frequency bands where you want the scanner to look for transmissions.The scanner also automatically stores the last 10 hits received into a temporary bank called "Close Call Hits" in any Close
59Call mode. The hits go away when you cycle power. You can also store these trmporary frequencies into channel storage banks.Notes:• Close Call capture works well for locating the source of strong local transmissions such as mobile and handheld two-way radios in areas with no other strong transmission sources. However, if you are in an area with many transmission sources (such as pager radio transmitters, multi-use radio towers, trac control devices, etc.), Close Call RF capture might not nd the transmission you are searching for, or it might nd a transmission other than the one you are searching for.• Close Call works better with some types of transmissions than others. It might not correctly display frequency information for transmitters using a highly directive antenna (such as an amateur radio beam antenna), if there are many transmitters operating at the same time in the same area, or if the transmitter is a broadcast television station.Selecting Close Call Modes1. In Scan or Search mode press Func then Hold to enter the Close Call Menu.2. Scroll to Close Call mode and press Pgm/E.3. Scroll to select from the following modes:• Close Call DND - only checks for Close Call hits between transmissions avoiding breaks in current transmiss• Close Call Pri (Priority) - checks for Close Call hits every 2 seconds, even during transmissions.
60• Close Call O - turns o Close Call.• Close Call Only - performs continuous Close Call checks until you exit by pressing Scan or Srch/Svc.• Back - returns to previous menu.4. Press Pgm/E to select and return to the Close Call menu.If Close Call DND or Close Call Pri is selected, the Close Call icon will display in Scan and Search modes.Close Call Only ModeIn Close Call Only mode the rst line displays Close Call and scrolls CC Search from the right to the left on the second line and the Close Call icon will blink in the display.Enabled search bands appear on the lowest line. Disabled search bands are not displayed. The currently searched bank number ashes.• To turn Close Call bands on or o, use the number keys (1050 on the keypad.One search band must always be enabled. If you turn o all search bands, the scanner will display All Band Off!• To hold on a specic band, press Hold. Turn SCROLL CONTROL and select the band to monitor.When the scanner nds a frequency, CCFOUND! appears in the display. The scanner will also beep or ash the display (if enabled) in the Close Call Alert option in the Close Call menu.• Press any key (other than Hold) to view the displayed frequency.
61While monitoring a Close Call transmission, the scanner displays Close Call on rst line and the monitoring frequency on the second line.The modulation and any CTCSS/DCS received (if enabled) will also appear on the display.Numbers at the bottom of the display show the enabled Close Call bands. The currently searched band number ashes. When the transmission ends, the scanner resumes searching according to the delay setting.To hold on a frequency, press Hold. To start a Quick Search at the current frequency, turn the ScrOLL CONTROL in Hold mode and press Hold to start searching.To cancel the hit, turn the Scroll Control.To temporarily lock out a frequency, press any key then L/O.To permanently lock out a frequency, press any key then L/O twice quickly.To store a frequency, press Pgm/E. See Storing Found Search Frequencies on page ___.To exit Close Call Only mode, press Scan.See Also Close Call options on page ___ for Delay, CTCSS/DCS, Alert Settings, Setting Close Call Bands, and reviewing/unlocking frequencies.
62Setting Close Call OptionsSet Close Call BandsThis setting allows you to select the bands searched for all Close Call modes.1. Press Func then Hold to view the Close Call menu.2. Scroll to Close Call Bands and press Pgm/E.3. Scroll to each band you want to enable/disable and press Pgm/E.4. Scroll to select C-Call Band On or Off and press Pgm/E.• 25-54 V Low - VHF Low Band (25 - 54 MHz)• 108-137 Air - Air Band (108 - 137 MHz)• 137-174 V High - VHF High Band (137 - 225 MHz)• 225-320 Mil Air - Military Air Band (225 - 400 MHz)• 320-512 UHF - UHF Band (400 - 512 MHz)• Back - returns to previous menu.5. Press .Clr (or scroll to Back and press Pgm/E to save and return to the Close Call menu.Close Call AlertThis setting controls the Alert Beep and Alert Light settings used during Close Call operation. (Default = On for both)1. Press Func then Hold to view the Close Call menu.2. Scroll to Close Call Alert and press Pgm/E. Select from the following options:• Alert Beep - Controls whether the scanner sounds an alert beep when Close Call detects a signal.
63• Alert Light - Controls whether the scanner ashes the display backlight when Close Call detects a signal.• Back - returns to previous menu.3. Scroll to any option you want to enable/disable and press Pgm/E.4. Scroll to On or Off and press Pgm/E5. Press .Clr (or scroll to Back and press Pgm/E) to save and return to the Close Call menu.Close Call Hits BankThe scanner saves the last 10 Close Call hits into the Close Call temporary store bank named “Close Call Hits.”This setting turns the bank on or o during Scan mode. (Default = O )1. Press Func then Hold to view the Close Call menu.2. Scroll to Scan Hits and press Pgm/E.3. Scroll to Scan Hits On or Off and press Pgm/E to save and return to the Close Call menu. (Default = O)You can also store these temporary frequencies into channel storage banks when you receive them in Scan mode and scroll to them in Scan Hold mode.See also Storing Found Search Frequencies on page __.Close Call DelayThis setting controls how long the scanner stays on the frequency after a transmission ends before resuming Close Call operation. If you select a minus delay time, the scanner stops
64on the transmission for the preset time and then automatically resumes scanning. (Default = 2 seconds)1. Press Func then Hold to view the Close Call menu.2. Scroll to Set Delay and press Pgm/E.3. Scroll to select the delay time from following options:• -10 sec - resumes after 10 seconds.• -5 sec - resumes after 5 seconds.• 0 sec - resumes immediately.• 1 sec - waits 1 second for a reply then resumes.• 2 sec - waits 2 seconds for a reply then resumes.• 3 sec - waits 3 seconds for a reply then resumes. • 4 sec - waits 4 seconds for a reply then resumes. • 5 sec - waits 5 seconds for a reply then resumes.4. Press Pgm/E to save and return to the Close Call menu.Close Call CTCSS/DCS Search This setting controls whether the scanner will search for a subaudible tone when it stops on a transmission during Close Call operation. (Default = On)1. Press Func then Hold to view the Close Call menu.2. Scroll to CTCSS/DCS Search and press Pgm/E.3. Scroll to select one of the following options:• Search O• Search On4. Press Pgm/E to save and return to the Close Call menu.
65WEATHER OPERATIONYour scanner has been primarily designed as a multi-band, general services scanner. While it incorporates a weather alert ability as one of its features, we recommend that you not use the scanner as your sole means for receiving emergency alerts. Your local electronics retailer can supply a selection of weather radios that are dedicated to weather service monitoring. Such radios can be more dependable for this application.SEARCHING FOR A WEATHER BROADCASTTo monitor a weather channel, press Func then 3WX to view the Weather menu.Scroll to Weather Scan and press Pgm/E.The upper line displays WX Scan and the lower line displays the scanning frequency with the channel number and the modulation. The scanner starts scanning the preprogrammed weather frequencies, and stops on the rst good signal. Generally, there will be one channel of the seven that you will receive best. If this station is weak, turn the Scroll Control to check for other weather broadcasts in your area.Notes:• NOAA broadcasts are continuous broadcasts. You only lose reception if you move out of a coverage area. If the signal is lost, the scanner resumes searching for a weather transmission.• You cannot lock out weather frequencies.
66WEATHER ALERT STANDBYIn Weather Alert mode, your scanner functions as a severe weather warning radio. This is especially useful when your area is expecting severe weather conditions late at night. When you set the scanner to Weather Alert mode, it scans the weather channels, but does not play the channel’s audio.To turn Weather Alert Standby on or o, press Func then 3WX to view the Weather menu.Scroll to Weather Standby and press Pgm/E.The upper line displays WX Alert Standby and the lower lines display the channel number with the frequency and modulation.When the scanner detects the Weather Alert Tone (1050Hz), the scanner goes into Hold mode, immediately sounds a Weather Alert siren and displays WX Alert Warning. This siren sounds as long as the Weather Alert Tone (1050Hz) is broadcasted.Pressing any key stops the siren, opens the squelch, then monitors the Weather channel.To exit Weather Alert Standbymode, press Scan.WEATHER ALERT PRIORITYEnabling this setting assigns priority to weather alert scanning no matter what else the radio might be doing. Checking the weather channel every 5 seconds for a 1050Hz tone assures you of the latest occurrence of a NOAA warning. (Default = O)To turn Weather Alert Priority on or o, press Func then 3WX to view the Weather menu.
67Scroll to Alert Priority and press Pgm/E.Scroll to select WX Priority On or Off and press Pgm/E to save and return to the Weather menu.Press Scan or Srch/Svc to exit.While Weather Alert Priority is active, WX appears in the display.If no carrier is on any Weather channel, the scanner displays No WX Reception WX Priority Off and turns Weather Alert Priority o.REFERENCESCTCSS FREQUENCIES67.0 69.3 71.9 74.4 77.0 79.782.5 85.4 88.5 91.5 94.8 97.4100.0 103.5 107.2 110.9 114.8 118.8123.0 127.3 131.8 136.5 141.3 146.2151.4 156.7 159.8 162.2 165.5 167.9171.3 173.8 177.3 179.9 183.5 186.2189.9 192.8 196.6 199.5 203.5 206.5210.7 218.1 225.7 229.1 233.6 241.8250.7 254.1
68DSC CODES023 025 026 031 032 036 043 047051 053 054 065 071 072 073 074114 115 116 122 125 131 132 134143 145 152 155 156 162 165 172174 205 212 223 225 226 243 244245 246 251 252 255 261 263 265266 271 274 306 311 315 325 331332 343 346 351 356 364 365 371411 412 413 423 431 432 445 446452 454 455 462 464 465 466 503506 516 523 526 532 546 565 606612 624 627 631 632 654 662 664703 712 723 731 732 734 743 754
69WARRANTY ONE YEAR LIMITED WARRANTY Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further eect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modied, altered, or used as part of any conversion kits, subassemblies, or any congurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in eect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling)
70incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should include
71all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd. Fort Worth, TX 76155 (800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday
72

Navigation menu