Uniden America UB360 DIGITAL MOBILE TRUNKING SCANNER User Manual

Uniden America Corporation DIGITAL MOBILE TRUNKING SCANNER Users Manual

Users Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.htmlBCD996XT ● Important information ❍ General Precautions ❍ Specifications ❍ FCC Information ❍ Warranty and Support Information ❍ User Guide Information ● Operation overview ● Setting up the hardware ● Programming your scanner ● Operating your scanner Important information For general information about using a scanner, including how to program the various types of radio systems into your scanner, we suggest you start with the General Users Guide page. General Precautions Specifications ● Hardware specifications ● Software reference <NOT YET AVAILABLE> FCC Information Warranty and Support Information User Guide Information Operation overview ● Available operation modes ● Menu reference ● Keys and their functions ● Reading the display Setting up the hardware ● Included with the scanner ● Installing the batteries ● Connecting the antenna file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.html (1 of 2)4/7/2009 10:08:22 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.html● Connecting a GPS receiver Programming your scanner ● Setting up systems ● Programming Number Tags ● Programming Quick Keys ● Programming Search Keys ● Programming locations ● Setting alerts Operating your scanner ● Using Number Tags ● Using Quick Keys, Startup Keys, and Search Keys ● Using Tone Out mode ● Using Close Call mode ● Using Band Scope mode ● Using GPS mode This page applies to the following scanner(s): BCD996XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.html (2 of 2)4/7/2009 10:08:22 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.htmlConventional Systems Please note that these pages are meant as general instructions. While most of the information here applies to all scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the text. Since a conventional system is really a collection of frequencies, the first thing you need to know is the frequency for each channel you want to program. Here is an example of a conventional system frequency list from RadioReference: Conventional System ● Here is a conceptual layout diagram of a basic conventional system. (Click here for a legend of the diagram.) ● You can download a planning worksheet for conventional systems as a pdf file or an Excel spreadsheet file. ● Programming a Conventional System ❍ Create a system ■ System properties ❍ Create at least 1 channel group ■ Channel group properties ❍ Create at least 1 channel in each group ■ Channel properties Programming a Conventional System To program a conventional system, you'll need to program the required elements in following order (click here for information on using the menu): Create a system 1. Go to the Program System menu and choose New System . 2. The scanner will prompt you for the System Type. Select Conventional . 3. When the scanner prompts you confirm, tap YES . 4. The scanner creates the system with a default name. Select Edit Name if you want to change it. 5. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. System properties All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name 5 AMfile:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (1 of 4)4/7/2009 10:08:2
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.htmlRequired None Recommended Name Edit Name Number tag Set Number Tag Quick key Set Quick Key Optional Automatic Gain Control (AGC) BCD396XT and BCD996XT: Set Audio AGC BC346XT and BCT15X: Not available Delay time Set Delay Time Hold time Set Hold Time Lockout Set Lockout P25 wait time BCD396XT and BCD996XT: P25 Waiting Time BC346XT and BCT15X: Not available Startup key Set Startup Key Available operations Copy a system Copy System Delete a system Delete System Create at least 1 channel group Each conventional system can contain up to 20 channel groups, and all systems must contain at least 1 channel group. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Group menu and select New Group . 3. If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel group properties All of these options can be found by selecting the group name under your scanner's Edit Group menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended 5 AMfile:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (2 of 4)4/7/2009 10:08:2
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.htmlName Edit Name Quick key Set Quick Key Optional Location information Set Location Info Lockout Set Lockout Available operations Delete a group Delete Group Create at least 1 channel in each group Each conventional system can contain up to 1000 channels in each group, and all groups must contain at least 1 channel. 1. On the Edit Group menu, select the channel group you just created. 2. Go to the Edit Channel menu and select New Channel . 3. Input the frequency for this channel in MHz. 4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel properties (All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If necessary, the sub-menu and the exact option name are listed beside each property.) Property Option name Required Frequency Edit Frequency Recommended Analog/digital BCD396XT and BCD996XT: Set Audio Type BC346XT and BCT15X: Not available ● CTCSS/DCS Set CTCSS/DCS (BCD396XT: analog channels only) ● P25 Network Address (NAC) BCD396XT and BCD996XT: P25 NAC Option (digital channels only) BC346XT and BCT15X: Not available Modulation Set Modulation 5 AMfile:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (3 of 4)4/7/2009 10:08:2
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.htmlName Edit Name Number tag Set Number Tag Optional Alert Set Alert Attenuator Set Attenuator Lockout Set Lockout Priority Set Priority Volume Offset Volume Offset Available operations Copy a channel Copy Channel Delete a channel Delete Channel This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT UsersGuide 5 AMfile:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (4 of 4)4/7/2009 10:08:2
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.htmlEDACS SCAT Systems Please note that these pages are meant as general instructions. While most of the information here applies to all scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the text. This section deals with EDACS SCAT systems. Click here for information on EDACS Wide and Narrow systems. Below is an example of an EDACS SCAT system from RadioReference: 150 px And here is a conceptual layout diagram of a basic EDACS SCAT system. (Click here for a legend of the diagram.) ● Programming an EDACS SCAT System ❍ Create a system ■ System properties ❍ Create a site ■ Site properties ❍ Create at least 1 frequency ■ Frequency properties Programming an EDACS SCAT System To program an EDACS SCAT system, you'll need to program the required elements in following order (click here for information on using the menu): Create a system 1. Go to the Program System menu and choose New System . 2. The scanner will prompt you for the System Type. Select EDCS . 3. The scanner will prompt you for the sub-type. Select SCAT . 4. When the scanner prompts you confirm, tap YES . 5. The scanner creates the system with a default name. Select Edit Name if you want to change it. 6. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. System properties All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html (1 of 3)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.htmlName Edit Name Number tag Set Number Tag Optional Automatic Gain Control (AGC) BCD396XT or BCD996XT: Set Audio AGC BC346XT or BCT15: Not available Delay time Set Delay Time Available operations Copy a system Copy System Delete a system Delete System Create a site Each EDACS SCAT system must contain exactly 1 site. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Site menu. 3. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Site properties All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended Quick key Set Quick Key Optional Attenuator Set Attenuator Hold time Set Hold Time Location information Set Location Info Lockout Set Lockout Modulation Set Modulation Startup key Set Startup Key Available operations None Create at least 1 frequency Each EDACS SCAT system must contain at least 1 frequency in its site. 1. Open the Edit Site menu. 2. Go to the Set Frequencies sub-menu and select New Frequency . 3. Enter at least 1 frequency for this site. 4. If you need to change any of the frequency properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Frequency properties All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html (2 of 3)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.htmlProperty Option name Required None Recommended Number tag Set Number Tag Optional Lockout Set Lockout Available operations Delete a frequency Delete Frequency This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html (3 of 3)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.htmlEDACS Trunked Systems Please note that these pages are meant as general instructions. While most of the information here applies to all scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the text. This section deals with EDACS Wide or standard systems. Click here for information on EDACS SCAT systems. This includes EDACS systems that use ESK. No special setting is needed to enable ESK tracking on an EDACS system. Note that the scanner cannot decode EDACS ProVoice. Below is an example of an EDACS trunked system from RadioReference: EDACS Wide System ● Here is a conceptual layout diagram of a basic EDACS Wide system. (Click here for a legend of the diagram.) ● You can download a planning worksheet for EDACS systems as a pdf file or an Excel spreadsheet file. ● Programming an EDACS System ❍ Create a system ■ System properties ❍ Create at least 1 site ■ Site properties ❍ Create at least 1 frequency in each site ■ Frequency properties ● Programming a system for Scanning ❍ Create at least 1 channel group ■ Channel group properties ❍ Create at least 1 channel in each group ■ Channel properties file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (1 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.htmlProgramming an EDACS System To program an EDACS system, you'll need to program the required elements in following order (click here for information on using the menu): Create a system 1. Go to the Program System menu and choose New System . 2. The scanner will prompt you for the System Type. Select EDCS . 3. The scanner will prompt you for the sub-type. Select Wide/Narrow . 4. When the scanner prompts you confirm, tap YES . 5. The scanner creates the system with a default name. Select Edit Name if you want to change it. 6. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. System properties All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended Name Edit Name Number tag Set Number Tag Optional Automatic Gain Control (AGC) BCD396XT and BCD996XT: Set Audio AGC BC346XT and BCT15X: Not available Delay time Set Delay Time Emergency alert Emergency Alert ID format Set ID Format (AFS) or (DEC) file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (2 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.htmlID scan/search ID Scan/Search Priority ID scan Priority ID scan Available operations Copy a system Copy System Delete a system Delete System Review locked-out IDs Rvw ID:Srch L/O Clear all locked-out IDs Clr All L/O IDs Create at least 1 site Each EDACS system can contain up to 256 sites, and all systems must contain at least 1 site. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Site menu and select New Site . 3. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Site properties All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required Site type Set Site Type Recommended Name Edit Name Quick key Set Quick Key Optional Attenuator Set Attenuator file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (3 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.htmlHold time Set Hold Time Location information Set Location Info Lockout Set Lockout Modulation Set Modulation Startup key Set Startup Key Available operations Delete a site Delete Site Create at least 1 frequency in each site Each trunked system can contain up to 23 frequencies in each site, and all sites must contain at least 1 frequency. 1. On the Edit Site menu, select the site you just created. 2. Go to the Set Frequencies sub-menu and select New Frequency . 3. Enter at least 1 frequency for this site. 4. When you enter a new frequency, the scanner will prompt you for the logical channel number or LCN for that frequency. Enter a number from 1 through 30. 5. If you need to change any of the frequency properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Frequency properties All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required Logical channel number Input LCN Recommended None file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (4 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.htmlOptional Lockout Set Lockout Available operations Delete a frequency Delete Frequency Programming a system for Scanning Once you create the system and at least 1 site, you can Search the system with no problems. However, if you want to Scan the system, you'll need to program the required elements in following order (click here for information on using the menu): Create at least 1 channel group Each EDACS system can contain up to 20 channel groups, and any system you want to scan must contain at least 1 channel group. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Group menu and select New Group . 3. If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel group properties All of these options can be found by selecting the group name under your scanner's Edit Group menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended Name Edit Name Quick key Set Quick Key file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (5 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.htmlOptional Location information Set Location Info Lockout Set Lockout Available operations Delete a group Delete Group Create at least 1 channel in each group Each trunked system can contain up to 500 channels in each group, and all groups must contain at least 1 channel. 1. On the Edit Group menu, select the channel group you just created. 2. Go to the Edit Channel menu and select New Channel . 3. Input the Talk Group ID (TGID) for this channel. 4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel properties All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required TGID Edit Talk Group ID Recommended Name Edit Name Number tag Set Number Tag Optional Alert Set Alert file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (6 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.htmlLockout Set Lockout Priority Set Priority Volume Offset Volume Offset Available operations Copy a channel Copy Channel Delete a channel Delete Channel This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT UsersGuide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (7 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.htmlLTR Trunked Systems Please note that these pages are meant as general instructions. While most of the information here applies to all scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the text. Below is an example of an Logic Trunked Radio or LTR system from RadioReference: LTR System ● Here is a conceptual layout diagram of a basic LTR system. (Click here for a legend of the diagram.) ● You can download a planning worksheet for LTR systems as a pdf file or an Excel spreadsheet file. ● For more information on the different types of LTR systems and how they work, see the Logic Trunked Radio page at Radio Reference's Wiki. ● Programming an LTR System ❍ Create a system ■ System properties ❍ Create at least 1 site ■ Site properties ❍ Create at least 1 frequency in each site ■ Frequency properties ● Programming a system for Scanning ❍ Create at least 1 channel group ■ Channel group properties ❍ Create at least 1 channel in each group ■ Channel properties file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (1 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.htmlProgramming an LTR System To program an LTR system, you'll need to program the required elements in following order (click here for information on using the menu): Create a system 1. Go to the Program System menu and choose New System . 2. The scanner will prompt you for the System Type. Select LT . 3. When the scanner prompts you confirm, tap YES . 4. The scanner creates the system with a default name. Select Edit Name if you want to change it. 5. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. System properties All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended Name Edit Name Number tag Set Number Tag Optional Automatic Gain Control (AGC) BCD396XT and BCD996XT: Set Audio AGC BC346XT and BCT15X: Not available Delay time Set Delay Time ID scan/search ID Scan/Search Priority ID scan Priority ID scan file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (2 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.htmlAvailable operations Copy a system Copy System Delete a system Delete System Review locked-out IDs Rvw ID:Srch L/O Clear all locked-out IDs Clr All L/O IDs Create at least 1 site Each LTR system can contain up to 256 sites, and all systems must contain at least 1 site. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Site menu and select New Site . 3. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Site properties All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended Name Edit Name Quick key Set Quick Key Optional Attenuator Set Attenuator Hold time Set Hold Time file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (3 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.htmlLocation information Set Location Info Lockout Set Lockout Modulation Set Modulation Startup key Set Startup Key Available operations Delete a site Delete Site Create at least 1 frequency in each site Each LTR system can contain up to 20 frequencies in each site, and all sites must contain at least 1 frequency. 1. On the Edit Site menu, select the site you just created. 2. Go to the Set Frequencies sub-menu and select New Frequency . 3. Enter at least 1 frequency for this site. 4. When you enter a new frequency, the scanner will prompt you for the logical channel number or LCN for that frequency. Enter a number from 1 through 20. 5. If you need to change any of the frequency properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Frequency properties All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required Logical channel number Input LCN Recommended None Optional file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (4 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.htmlLockout Set Lockout Available operations Delete a frequency Delete Frequency Programming a system for Scanning Once you create the system and at least 1 site, you can Search the system with no problems. However, if you want to Scan the system, you'll need to program the required elements in following order (click here for information on using the menu): Create at least 1 channel group Each LTR system can contain up to 20 channel groups, and any system you want to scan must contain at least 1 channel group. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Group menu and select New Group . 3. If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel group properties All of these options can be found by selecting the group name under your scanner's Edit Group menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended Name Edit Name Quick key Set Quick Key Optional file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (5 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.htmlLocation information Set Location Info Lockout Set Lockout Available operations Delete a group Delete Group Create at least 1 channel in each group Each trunked system can contain up to 500 channels in each group, and all groups must contain at least 1 channel. 1. On the Edit Group menu, select the channel group you just created. 2. Go to the Edit Channel menu and select New Channel . 3. Input the Talk Group ID (TGID) for this channel. 4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel properties All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required TGID Edit Talk Group ID Recommended Name Edit Name Number tag Set Number Tag Optional Alert Set Alert Lockout Set Lockout file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (6 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.htmlPriority Set Priority Volume Offset Volume Offset Available operations Copy a channel Copy Channel Delete a channel Delete Channel This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (7 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.htmlMotorola Trunked Systems Please note that these pages are meant as general instructions. While most of the information here applies to all scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the text. A Motorola system can be an 800 MHz, 400 MHz (UHF), or 100-200 MHz (VHF) system. Below are some examples of these Motorola systems from RadioReference: Motorola 800 MHz System Another Motorola 800 MHz System ● Even though some (or all) of the System Voice channels are APCO 25, this system, and others like it, is correctly programmed as a Motorola 800 MHz system, per the information given for file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (1 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.htmlthe System Type. Motorola UHF System (400 MHz band) Motorola VHF System (100-200 MHz band) file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (2 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html● Here is a conceptual layout diagram of a basic Motorola system. (Click here for a legend of the diagram.) ● You can download a planning worksheet for Motorola systems as a pdf file or an Excel spreadsheet file. ● For more information on the different types of Motorola systems and how they work, see the Motorola page at Radio Reference's Wiki. ● Programming a Motorola System ❍ Create a system ■ System properties ❍ Create at least 1 site ■ Site properties ❍ Create at least 1 frequency in each site ■ Frequency properties ● Programming a system for Scanning ❍ Create at least 1 channel group ■ Channel group properties ❍ Create at least 1 channel in each group ■ Channel properties Programming a Motorola System To program a Motorola system, you'll need to program the required elements in following order: Create a system 1. Go to the Program System menu and choose New System . 2. The scanner will prompt you for the System Type. Select MOT . 3. When the scanner prompts you confirm, tap YES . 4. The scanner creates the system with a default name. Select Edit Name if you want to change it. 5. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. System properties All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (3 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.htmlFleet map Edit Fleet Map (Required for Motorola Type I or Type I/II Hybrid systems only)Recommended Name Edit NameNumber tag Set Number TagOptional Automatic Gain Control (AGC) BCD396XT and BCD996XT: Set Audio AGCBC346XT and BCT15X: Not availableDelay time Set Delay TimeEmergency alert Emergency AlertID format Set ID Format (DEC/HEX) or (AFS/DEC)ID scan/search ID Scan/SearchPriority ID scan Priority ID scanStatus bit Set Status bitAvailable operations Copy a system Copy SystemDelete a system Delete SystemReview locked-out IDs Rvw ID:Srch L/OClear all locked-out IDs Clr All L/O IDsCreate at least 1 site Each Motorola system can contain up to 256 sites, and all systems must contain at least 1 site. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Site menu and select New Site . 3. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Site properties All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option nameRequiredBand plan Edit Band PlanRecommended file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (4 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.htmlName Edit NameQuick key Set Quick KeyOptionalAttenuator Set AttenuatorControl channel only Set C-Ch OnlyHold time Set Hold TimeLocation information Set LocationInfoLockout Set LockoutModulation Set ModulationP25 wait time BCD396XT and BCD996XT: P25 Waiting TimeBC346XT and BCT15X: Not availableStartup key Set Startup KeyAvailable operationsDelete a site Delete SiteCreate at least 1 frequency in each site Each trunked system can contain up to 30 frequencies in each site, and all sites must contain at least 1 frequency. 1. On the Edit Site menu, select the site you just created. 2. Go to the Set Frequencies sub-menu and select New Frequency . 3. Enter at least 1 frequency for this site. 4. If you need to change any of the frequency properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Frequency properties All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required None Recommended file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (5 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.htmlNone Optional Lockout Set Lockout Available operations Delete a frequency Delete Frequency Programming a system for Scanning Once you create the system and at least 1 site, you can Search the system with no problems. However, if you want to Scan the system, you'll need to program the required elements in following order: Create at least 1 channel group Each Motorola system can contain up to 20 channel groups, and any system you want to scan must contain at least 1 channel group. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Group menu and select New Group . 3. If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel group properties (All of these options can be found by selecting the group name under the Edit Group menu. If necessary, the sub-menu and the exact option name are listed beside each property.) Required None Recommended Name (Edit Name)Quick key (Set Quick Key)OptionalLocation information (Set LocationInfo)Lockout (Set Lockout)file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (6 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.htmlAvailable operations Delete GroupCreate at least 1 channel in each group Each trunked system can contain up to 500 channels in each group, and all groups must contain at least 1 channel. 1. On the Edit Group menu, select the channel group you just created. 2. Go to the Edit Channel menu and select New Channel . 3. Input the Talk Group ID (TGID) for this channel. 4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel properties (All of these options can be found by selecting the channel name under the Edit Channel menu. If necessary, the sub-menu and the exact option name are listed beside each property.) Required TGID (Edit Talk Group ID)RecommendedAudio type (Analog or digital) (BCD396XT and BCD996XT only) (Set Audio Type)Name (Edit Name)Number tag (Set Number Tag)OptionalAlert (Set Alert)Lockout (Set Lockout)Priority (Set Priority)Volume OffsetAvailable operationsCopy ChannelDelete ChannelThis page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (7 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.htmlStandard P25 Trunked Systems To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.This section deals with standard Project 25 or P25 systems. Click here for information on P25 one-frequency systems. Below is an example of a standard P25 system from RadioReference: Standard P25 System ● Here is a conceptual layout diagram of a basic P25 system. (Click here for a legend of the diagram.) ● For more information on P25 systems and how they work, see the Project 25 page at Radio Reference's Wiki. ● Programming a P25 System ❍ Create a system ■ System properties ❍ Create at least 1 site ■ Site properties ❍ Create at least 1 frequency in each site ■ Frequency properties ● Programming a system for Scanning ❍ Create at least 1 channel group ■ Channel group properties file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (1 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html❍ Create at least 1 channel in each group ■ Channel properties Programming a P25 System To program a P25 system, you'll need to program the required elements in following order: Create a system 1. Go to the Program System menu and choose New System . 2. The scanner will prompt you for the System Type. Select P25 . 3. The scanner will prompt you for the sub-type. Select Standard trunk . 4. When the scanner prompts you confirm, tap YES . 5. The scanner creates the system with a default name. Select Edit Name if you want to change it. 6. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. System properties All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required NoneRecommended Name Edit NameNumber tag Edit Sys Option#Set Number TagOptional Automatic Gain Control (AGC) BCD396XT: Edit Sys Option#Set Audio AGC BC346XT: Not availableDelay time Edit Sys Option#Set Delay TimeID format Edit Sys Option# Set ID Format (DEC/HEX) or (AFS/DEC)ID scan/search Edit Sys Option#ID Scan/Searchfile:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (2 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.htmlPriority ID scan Edit Sys Option#Priority ID scanAvailable operations Copy a system Copy SystemDelete a system Delete SystemReview locked-out IDs Edit Sys Option#Rvw ID:Srch L/OClear all locked-out IDs Edit Sys Option#Clr All L/O IDsCreate at least 1 site Each P25 system can contain up to 256 sites, and all systems must contain at least 1 site. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Site menu and select New Site . 3. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Site properties All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option name Required NoneRecommended Band plan Edit Band PlanName Edit NameQuick key Set Quick KeyOptional Attenuator Set Attenuatorfile:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (3 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.htmlHold time Set Hold TimeLocation information Set LocationInfoLockout Set LockoutStartup key Set Startup KeyAvailable operations Delete a site Delete SiteCreate at least 1 frequency in each site Each P25 system can contain up to 20 frequencies in each site, and all sites must contain at least 1 frequency. 1. On the Edit Site menu, select the site you just created. 2. Go to the Set Frequencies sub-menu and select New Frequency . 3. Enter at least 1 frequency for this site. 4. If you need to change any of the frequency properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Frequency properties All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option NameRequiredNoneRecommendedNone OptionalLockout Set LockoutAvailable Operationsfile:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (4 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.htmlDelete a frequency Delete FrequencyProgramming a system for Scanning Once you create the system and at least 1 site, you can Search the system with no problems. However, if you want to Scan the system, you'll need to program the required elements in following order (click here for information on using the menu): Create at least 1 channel group Each P25 system can contain up to 20 channel groups, and any system you want to scan must contain at least 1 channel group. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Group menu and select New Group . 3. If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel group properties All of these options can be found by selecting the group name under your scanner's Edit Group menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option nameRequired NoneRecommended Name Edit NameQuick key Set Quick KeyOptionalLocation information Set LocationInfoLockout Set LockoutAvailable operationsfile:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (5 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.htmlDelete a group Delete GroupCreate at least 1 channel in each group Each trunked system can contain up to 500 channels in each group, and all groups must contain at least 1 channel. 1. On the Edit Group menu, select the channel group you just created. 2. Go to the Edit Channel menu and select New Channel . 3. Input the Talk Group ID (TGID) for this channel. 4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel properties All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If necessary, the sub-menu and option name on each scanner are listed beside the property. Property Option nameRequiredTGID Edit Talk Group IDRecommendedName Edit NameNumber tag Set Number TagOptionalAlert Set AlertLockout Set LockoutPriority Set PriorityVolume Offset Volume OffsetAvailable operationsCopy a channel Copy Channelfile:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (6 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.htmlDelete a channel Delete ChannelThe information on this page applies to the following scanner(s): BCD996XT BCD396XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (7 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.htmlSingle-Frequency P25 Trunked Systems Single-frequency P25 systems are almost identical to standard P25 systems, except they only have one site per system and the system can use a P25 network address. Here is a conceptual layout diagram of a single-frequency P25 system (click here for a legend of the diagram). ● Programming a Single-Frequency P25 System ❍ Create a system ■ System properties ■ Create exactly 1 site ■ Site properties ● Programming a system for Scanning ❍ Create at least 1 channel group ■ Channel group properties ❍ Create at least 1 channel in each group ■ Channel properties Programming a Single-Frequency P25 System To program a single-frequency P25 system, you'll need to program the required elements in following order (click here for information on using the menu): Create a system 1. Go to the Program System menu and choose New System . 2. The scanner will prompt you for the System Type. Select P25 . 3. When the scanner prompts you confirm, tap YES . 4. The scanner creates the system with a default name. Select Edit Name if you want to change it. 5. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. System properties file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (1 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html(All of these options can be found under the Program System menu. If necessary, the sub-menu and the exact option name are listed beside each property.) Required NoneRecommended Name (Edit Name)Network address (Edit Sys Option#P25 NAC Option)Number tag (Edit Sys Option#Set Number Tag)Optional Automatic gain control (AGC) (Edit Sys Option#Set Audio AGC)Delay time (Edit Sys Option#Set Delay Time)ID format (Edit Sys Option#Set ID Format (DEC/HEX) or (AFS/DEC))ID scan/search (Edit Sys Option#ID Scan/Search)Available OperationsCopy systemDelete systemReview Locked-Out IDs (Edit Sys Option#Rvw ID:Srch L/O)Clear All Locked-Out IDs (Edit Sys Option#Clr All L/O IDs)Create exactly 1 site Each single-frequency P25 system must contain exactly 1 site. 1. On the Program System menu, select the system you just created. 2. Go to the Edit Site menu and select New Site . 3. Select the Set Frequencies menu and enter the frequencies for this site. 4. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (2 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.htmlsettings. Site properties (All of these options can be found by selecting the site name under the Edit Site menu. If necessary, the sub-menu and the exact option name are listed beside each property.) Required Frequencies (Set Frequencies) Recommended Name (Edit Name)Number tag (Set Number Tag)Quick key (Set Quick Key)Optional Attenuator (Set Attenuator)Hold time (Set Hold Time)Location information (Set LocationInfo)Lockout (Set Lockout)Startup key (Set Startup Key)Available Operations Delete SiteProgramming a system for Scanning Once you create the system and site, you can Search the system with no problems. However, if you want to Scan the system, you'll need to program the required elements in following order (click here for information on using the menu): Create at least 1 channel group Each P25 system can contain up to 20 channel groups, and any system you want to scan must contain at least 1 channel group. file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (3 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html1. On the Program System menu, select the system you just created. 2. Go to the Edit Group menu and select New Group . 3. If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. Channel group properties (All of these options can be found by selecting the group name under the Edit Group menu. If necessary, the sub-menu and the exact option name are listed beside each property.) Required NoneRecommended Name (Edit Name)Quick key (Set Quick Key) Optional Location information (Set LocationInfo)Lockout (Set Lockout) Available operations Delete Group Create at least 1 channel in each group Each trunked system can contain up to 500 channels in each group, and all groups must contain at least 1 channel. 1. On the Edit Group menu, select the channel group you just created. 2. Go to the Edit Channel menu and select New Channel . 3. Input the Talk Group ID (TGID) for this channel. 4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings. file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (4 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.htmlChannel properties (All of these options can be found by selecting the channel name under the Edit Channel menu. If necessary, the sub-menu and the exact option name are listed beside each property.) Required TGID (Edit Talk Group ID) Recommended Name (Edit Name)Number tag (Set Number Tag)Optional Alert (Set Alert)Lockout (Set Lockout)Volume Offset Available operations Copy ChannelDelete Channel This page applies to the following scanner(s): BCD996XT BCD396XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (5 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.htmlRadio Systems Overview There are two basic types of radio systems: conventional systems and trunked systems. ● Conventional radio systems ● Trunked radio systems ❍ Trunked system basics ❍ How a trunked system works ❍ A real life example Conventional radio systems In a conventional radio system, each group of users is assigned one (for simplex systems) or two frequencies (for repeater systems). For example, the police in your area might operate on 460.500 MHz, the fire department on 154.445 MHz, the highway department on 37.900 MHz, etc. All transmissions from each group always go out on the on the same frequency--the police won't randomly switch to 500.000 MHz, for instance. Since each group always stays on the same frequency and frequencies never overlap, it's very easy to follow conversations on conventional systems: when your scanner stops on a frequency, you usually know who it is, and more importantly, you can stop on a channel and listen to an entire conversation. Up until the late 1980s, this was the primary way that radio systems operated. Some examples of conventional radio systems are ● Aircraft ● Amateur radio ● FRS/GMRS users ● Small, private radio systems Trunked radio systems Several major trends have converged that have resulted in agencies moving to more efficient trunked radio systems: ● Higher levels of radio usage has meant that there arent enough individual frequencies available to allow every group to have their own frequency. ● Technology advances have brought down the overall cost and complexity of implementing a trunked radio system while increasing the features available to the agency and individual radio users. ● Roll-out of major statewide trunked systems makes it easier for even small agencies to piggy back onto the larger system for less cost than replacing existing systems. Trunked system basics There are three major elements common to most trunked systems: System Controller The system controller is a special computer that assigns voice channels to users as they key up their radio. The controller is the brains behind the trunking system. Voice Frequency Pool The voice frequency pool is a selection of radio frequencies available to the system controller for assigning voice traffic. By assigning voice frequencies to channels only as they are needed, a trunked system can support many more channels than it actually has frequencies. Talk Group IDs A Talk Group ID identifies which user or agency has been assigned a particular voice frequency at any particular moment. The Talk Group ID is essentially the user's "channel": since each voice frequency is used over and over by all the agencies on the system, trunked systems rely on the Talk Group ID to identify which particular user or agency is talking. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html (1 of 3)4/7/2009 10:08:35 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.htmlHow a trunked system works A typical communication on a trunked system goes something like this: 1. A user selects the channel they want to communicate on and presses the PTT button on the side of their radio. 2. This sends a channel request message to the controller that the user wants to start a transmission on the Talk Group ID (the channel) that they selected. 3. The controller locates an unused voice frequency and assigns it to that Talk Group ID. 4. The controller then sends out a channel grant message to all radios on the system so everyone knows where to find the voice channel for that Talk Group. 5. At this point, the original user's radio beeps, and the user can begin their transmission. While this sounds complicated, in real life this process takes about half a second (sometimes less). When the user releases the PTT button, the controller releases the voice frequency from its Talk Group ID assignment, leaving the frequency free for the next user that becomes active. A real life example A typical 20-frequency trunked system can support hundreds of channels. For example, the Fort Worth system includes over 400 channels providing communication support for Fort Worth agencies (Police, Fire and Ambulance) and agencies in the surrounding cities of Kennedale, North Richland Hills, Forest Hill, Haltom City and Richland Hills. In addition, the same system also supports the Tarrant County Sheriff and Texas Christian University. (You can see its setup in the RadioReference database.) Before moving to the trunked system, the Police had only 6 channels (North, South, East, West, Information, and Tactical). Since moving to the trunked system, they are now able to provide 11 channels for North Side PD alone: a main dispatch channel, three talkaround channels, a supervisor channel, a bike patrol channel, and several community patrol channels. Other police districts have similar channel requirements, and now special file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html (2 of 3)4/7/2009 10:08:35 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.htmloperations teams such as SWAT, Narcotics, and Traffic each have one or more dedicated channels for their use as well. This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html (3 of 3)4/7/2009 10:08:35 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.htmlDeciphering Trunked Systems ● Before you program a trunked system ❍ System Type ■ P25 Systems ■ LTR Systems ■ Motorola Systems ■ EDACS Systems ■ Conventional Systems ■ Non-scannable Systems ❍ System Voice ❍ System Frequencies ❍ Talk Group IDs (Channels) Before you program a trunked system To the average radio user, the complexity of a trunked system is invisible. Their radio is programmed up at the radio shop. They can still easily select who they need to communicate with by selecting a channel on their two-way. They can even directly call other radio users without tying up a dispatch channelsomething they could never do before. As a scanner user, on the other hand, you need to know the different types of trunking systems in use, what options are available on each system, and three key pieces of information about any trunking system before you start any actual programming: ● System Type ● System Frequencies ● IDs of the Talk Groups you want to hear All of this information is usually available from the online database at RadioReference. The picture to the right shows a screenshot of a system from the database, with the pertinent information highlighted. file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (1 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.htmlSystem Type There are five major types of scannable systems; some of these also have subtypes. In the RadioReference database, you can generally determine the radio system type by looking at the line labeled System Type at the top of the screen (inside the red square in the screenshot). file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (2 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.htmlP25 Systems These are identified in the RadioReference database as Project 25 Standard . If the System Type line says anything else, then it is not a P25 system (even though it might have some P25 channels). LTR Systems These systems are identified as LTR Standard in the system type. Motorola Systems There are several subcategories of Motorola systems, but they will all have some form of Motorola in the system type: Motorola Fleetnet , Motorola Smartnet , Motorola Smartzone , etc. Once you have identified that it is a Motorola system, you can check the system frequencies to confirm its subtype: ● Motorola 800: all of the frequencies are in the 800 MHz range ● Motorola 900: all of the frequencies are in the 900 MHz range ● Motorola UHF: all of the frequencies are between 400 and 512 MHz ● Motorola VHF: all of the frequencies are between 100 and 200 MHz. EDACS Systems There are three subtypes of EDACS systems: ● EDACS Wide: identified as EDACS Standard in the system type. ● EDACS Narrow: identified as EDACS Narrowband in the system type. ● EDACS SCAT: identified as EDACS Scat in the system type (these systems operate on a single frequency). Conventional Systems This fifth type of scannable system is a general catchall for all non-trunked systems. See Conventional Systems for more information. Non-scannable Systems There are several system types that cannot be monitored with a scanner, either because the systems use proprietary digital formats that are not licensable by scanner manufacturers, or because the systems are not in wide enough use to make it cost-effective for manufacturers to file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (3 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.htmldevelop a scanner that can monitor them. These non-scannable systems are identified in the system type as: ● EDACS w/ESK ● LTR Passport ● OpenSky Standard ● MPT1327 ● Tetra System Voice The other line inside the red square in the screenshot is System Voice , which summarizes the kinds of voice modulation used on the system. Youll find the following voice types: ● Analog (can be heard with any trunking scanner) ● APCO-25 (can be heard with a digital scanner) ● ProVoice (cannot be heard by any scanner) ● VSELP (cannot be heard by any scanner) The system voice also tells us when digital channels are mixed in with analog channels on the same system. Unfortunately, this means the system voice line can cause a lot of confusion. Just remember: system voice does not define the system type . For example, in the system information shown to the left, we see that APCO-25 can be used as a voice type on a Motorola system that is not actually a P25 system . When we're trying to determine whether a system is a P25 system, we need to ignore the System Voice line and focus on the System Type line. If there is P25 Voice on a non-P25 system, the scanner can sort this out while scanning. System Frequencies The system frequencies section in the database lists all the frequencies used by the system (see the blue square in the screenshot above on the right). For Motorola and P25 systems, you will file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (4 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.htmlneed to program only the system control channel frequencies: those are the frequencies shown in red (for primary control channels) and blue (for alternate control channels) in the database. For EDACS and LTR systems, you will need to program all the listed frequencies and their associated LCN (that is a small number right next to the frequency). Some systems have multiple sets of frequencies. These are called multi-site systems: each set of frequencies corresponds to a different physical antenna site. Talk Group IDs (Channels) The Talk Group information section (inside the green rectangle) shows the different channels on the system and which agency uses them. You'll need to go through the list and make a note of the channels you want to hear. Then you can start thinking about how you want to organize those channels. (Keep in mind that this screenshot shows just a few of the channels on a single system. One of the great features available to subscribers on RadioReference is the ability to tag channels directly on the site and print out a nicely-formatted hardcopy of each system. It makes this task much, much easier.) This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (5 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.htmlLocation-based Scanning Location-based scanning allows you to control which systems/sites and channel groups are scanned based on your exact location. This frees you from having to manually enable and disable systems or channel groups as you change location. To use Location-Based scanning, you need to have the following: ● the location for the center point for each system/site or channel group you want to control ● the radius or distance from the center point you want to set as the range for each system/site or channel group ● if you are scanning while traveling, you may want to include the heading (direction) of travel ● some type of mapping method. If you don't want to use paper maps, you might try a mapping software (such as Microsoft® Streets and Trips or Delorme® Street Atlas) that allows you to draw markings and overlays on maps. ● a GPS receiver with a serial data output (NMEA) There are many different approaches you can use to determine where to place a center point for a system/site or channel group. The two most common are the geopolitical approach and the antenna-centric approach. For large trunked systems, you may find that a combination of these two approaches works best. ● The Geopolitical Approach ● The Antenna-Centric Approach ❍ Finding an antenna location ● Combining for Efficiency ● See Also The Geopolitical Approach With the geopolitical approach, you want the scanner to turn on the system/site or channel group at the limit of relevance rather than reception. This approach is useful for scanning file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (1 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.htmltargets that have a well-defined jurisdiction and their transmission are only relevant when you are within that jurisdiction. To use the geopolitical approach, find the geographical center of the scanning target's territory (whether city, county, district, precinct, or other agency jurisdiction), and set these coordinates as your center point location. Then, adjust the range or radius to cover the boundaries of that target. To use this method, use your chosen mapping application to zoom out so that the entire target is visible, then, draw a circle that just covers the targets boundaries. Adjust the size of the circle to the nearest 1/2 mile increment. Depending on the shape of the territory, you may have to choose between a lot of overlap or not covering the entire area: jurisdiction, you might end up with a large amount of overlap. You'll have to decide which radius that best suits your application. For example, if your territory is a city, you'll have a lot of "extra" area if you use one single location: file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (2 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html On the other hand, if you sub-divide the area, you may end up with areas that are not covered: file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (3 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html The Antenna-Centric Approach Using an antenna-centric approach, you set the physical antenna location as the system/sites center point and the antenna's actual reach as the range. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (4 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html Finding an antenna location You can find the physical location of antennas using the databases available at Radio Referenceor the FCC's Antenna Structure Registration site. Both sites list the latitude, longitude, and height of the antenna, and both sites can map the exact location for you. (Radio Reference is more user-friendly, so it's easier to file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (5 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.htmlfind what you're looking for.) Combining for Efficiency Because many trunked systems have both multiple antenna sites and multiple agencies with differing geographic boundaries, you may want to combine the approaches: 1. Use the antenna centric approach at the site level: set the geographic coordinates of the antenna as the central location for each site. 2. Use the geopolitical approach at the channel group level. Within the same system, set up a channel group for each agency, and set the central point of the agency territory as the group location. With both approaches combined into a single system, the scanner will now seamlessly switch between file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (6 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.htmlantenna sites as needed to keep the scanner tuning only to those sites you can receive well, and will also turn channel groups on and off as you relocate to different jurisdictions. See Also Connecting a GPS receiver Programming locations This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (7 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.htmlScanning Legally Your scanner covers frequencies used by many different groups, including police and fire departments, ambulance services, government agencies, private companies, amateur radio services, military operations, pager services, and wireline (telephone and telegraph) service providers. It is legal to listen to almost every transmission your scanner can receive. However, there are some transmissions that you should never intentionally listen to. These include: ● Telephone conversations (cellular, cordless, or other private means of telephone signal transmission) ● Pager transmissions ● Any scrambled or encrypted transmissions According to the Electronic Communications Privacy Act (ECPA), you are subject to fines and possible imprisonment for intentionally listening to, using, or divulging the contents of such a conversation unless you have the consent of a party to the conversation (unless such activity is otherwise illegal). This scanner has been designed to prevent the reception of cellular telephone transmissions and the decoding of scrambled transmissions. This is done to comply with the legal requirement that scanners be manufactured so they are not easy to modify to pick up these transmissions. Do not open your scanners case to make any modifications that could allow it to pick up transmissions that are illegal to monitor. Modifying or tampering with your scanners internal components or using it in a way other than as described in the manual could invalidate your warranty and void your FCC authorization to operate it. In some areas, mobile and/or portable use of this scanner is unlawful or requires a permit. Check the laws in your area. It is also illegal in many areas (and a bad idea everywhere) to interfere with the duties of public safety officials by traveling to the scene of an incident without authorization. Digital Scanners Only: A license is required to use this product in Canada! file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.html (1 of 2)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.htmlThis page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.html (2 of 2)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GeneralPrecautions.htmlGeneral Precautions Before you use this scanner, please read and observe the following: Earphone Warning You can use an optional 32Ω stereo headset or earphone with your scanner. Use of an incorrect earphone or headset might be potentially hazardous to your hearing. The output of the phone jack is monaural, but you will hear it in both headphones of a stereo headset. Set the volume to a comfortable audio level coming from the speaker before plugging in the earphone or headset. Otherwise, you might experience some discomfort or possible hearing damage if the volume suddenly becomes too loud because of the volume control or squelch control setting. This might be particularly true of the type of earphone that is placed in the ear canal. Liquid Exposure Warning Uniden does not represent this unit to be waterproof. To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture! Power Disconnection Caution Important: Always turn the scanner off before disconnecting external power. Some settings are saved only as the scanner is powering down. This topic applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GeneralPrecautions.html4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.htmlFCC Information The FCC Wants You to Know IMPORTANT! This scanning radio has been manufactured so that it will not tune to the radio frequencies assigned by the FCC for cellular telephone usage. The Electronic Communications Privacy Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or cordless telephone transmissions or to market this radio when altered to receive them. The installation, possession, or use of this scanning radio in a motor vehicle may be prohibited, regulated, or require a permit in certain states, cities, and/or local jurisdictions. Your local law enforcement officials should be able to provide you with information regarding the laws in your community. For more details, see Scanning Legally. Modification Notice Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this User's Guide, could void your authority to operate this product. Part 15 Information This scanner has been tested and found to comply with the limits for a scanning receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This scanner generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this scanner does cause harmful interference to radio or television reception, which can be determined by turning the scanner on and off, you are encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.html (1 of 2)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.html● Increase the separation between the scanner and the receiver This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.html (2 of 2)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/WarrantyAndSupportInformation.htmlWarranty and Support Information Support Information Information online www.uniden.com Email support http://mycusthelp.com/uniden Phone support (800) 297-1023 (during regular business hours, Central time) One-Year Limited Warranty This warranty text applies to the following scanners: ● BCD396XT ● BC346XT ● BCD996XT ● BCT15X If your scanner is not listed, the warranty information below may not apply. Important: Evidence of original purchase is required for warranty service! WARRANTOR: UNIDEN AMERICA CORPORATION (Uniden) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if file:///C|/Documents%20and%20Settings/POpitz/My%20Do...emp/UnidenManBeta/WarrantyAndSupportInformation.html (1 of 3)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/WarrantyAndSupportInformation.htmlthe Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operating Guide for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion might not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you might also have other rights which vary from state to state. This warranty is void outside the United States of America. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in this Operating Guide you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, or delivered, to warrantor at: Uniden America Corporation Parts and Service Division 4700 Amon file:///C|/Documents%20and%20Settings/POpitz/My%20Do...emp/UnidenManBeta/WarrantyAndSupportInformation.html (2 of 3)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/WarrantyAndSupportInformation.htmlCarter Boulevard Fort Worth, TX 76155 This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BCD346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Do...emp/UnidenManBeta/WarrantyAndSupportInformation.html (3 of 3)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UserGuideInformation.htmlUser Guide Information Illustrations in this guide are used for explanation purposes only. Your scanner may not match the illustrations exactly. All content (including any media) contained within in this guide is copyright 2009 by Uniden America Corporation unless otherwise specified. Any content not belonging to Uniden America is marked as such and used with permission. Content or information in external sources are neither the intellectual property not the responsibility of Uniden America Corp. Uniden America makes no claim to the accuracy or completeness of external content. Screen grabs used in most examples are provided with the permission of RadioReference.com Astro®, DPL®, Digital Private Line®, Motorola®, PL®, PRIVACY PLUS®, Private Line®, SMARTNET®,and SMARTZONE® are registered trademarks of Motorola, Inc. LTR® is a registered trademark of E.F. Johnson Co. EDACS® is a registered trademark of M/A-COM Private Radio Systems Inc. Uniden® and Bearcat® are registered trademarks of Uniden America Corporation. TrunkTracker™, Trunk Tracking™, and Close Call™ are proprietary trademarks of Uniden America Corporation. Other trademarks used throughout this manual are the property of their respective holders. Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UserGuideInformation.html4/7/2009 10:08:44 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.htmlBCD996XT Specs To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.● Certified in accordance with FCC Rules and Regulations Part 15 Subpart C as of date of manufacture. (See FCC Information for more details.) ● FCC ID: AMWUB360 ● BCD996XT Specs ❍ General ❍ Frequency Range ❍ Special Functions ■ Band Scope Function ■ Two-Tone-Sequential ■ WX Alert ❍ Supported trunking systems ❍ Dynamic memory allocation capacity ❍ Heterodyne System ❍ CTCSS and DCS Tones General Attenuation 20dB nominal Audio Output Power 3W nominal into 8Ω speaker 30mW nominal into 32Ω stereo headphone Scan Rate 100 channels per second max (Conventional mode) Search Rate 300 steps per second max (5kHz steps only) External Jacks Antenna Jack: BNC Type file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (1 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.htmlPhone Jack: 3.5mm (1/8 in.) Stereo Type Ext.SP Jack: 3.5mm (1/8 in.) Monaural Type REC.Out Jack: 3.5mm (1/8 in.) Stereo Type Ext. DC Power and Orange Wire Jack 3 pin (Center Orange Wire) DC Power Jack: 5.5mm (1/5 in.) (Center Positive) GPS/Remote Interface Jack: D Sub 9pin Male Type Remote Interfase Jack (front panel): 4-pin Mini Custom Type Internal Speaker 8.0Ω 5.0W Max. 77mm (3.0 in.) Power Requirements DC:11V to 16.6V(Ext.DC Power Jack or DC Power Jack) AC Adapter (13.8V DC 750mA Regulated) (AD-1009) Operating Temperature Nominal: -20°C to +60° -4°F to +140°F Close Call: -10°C to +60°C +14°F to +140°F Size 7.2 in.(W) x 5.9 in.(D) x 2.2 in.(H) Weight 3.44 lbs Remote Functions Direct PC control Database management Wired cloning Display 64 x 128 Full Dot Matrix LCD with multi-color back light file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (2 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.htmlSensitivity (nominal) 12dB SINAD 0.3•V 25-27.995 MHz AM 0.3•V 28-53.98 MHz NFM 0.5•V 54-71.95 MHz WFM 0.2•V 72-75.995 MHz FM 0.5•V 76-107.9 MHz FMB 0.3•V 108-136.9916 MHz AM 0.2•V 137-173.9875 MHz NFM 0.5•V 174-215.95 MHz WFM 0.3•V 216-224.98 MHz NFM 0.3•V 225-379.975 MHz AM 0.3•V 380-512 MHz NFM 0.3•V 758-960 MHz NFM 0.4•V 1240-1300 MHz NFM Signal Noise Ratio (nominal) 49dB 25-27.995 MHz AM 41dB 28-53.98 MHz NFM file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (3 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html54dB 54-71.95 MHz WFM 48dB 72-75.995 MHz FM 60dB 76-107.9 MHz FMB 50dB 108-136.9916 MHz AM 41dB 137-173.9875 MHz NFM 54dB 174-215.95 MHz WFM 41dB 216-224.98 MHz NFM 50dB 225-379.975 MHz AM 40dB 380-512 MHz NFM 41dB 758-960 MHz NFM 37dB 1240-1300 MHz NFM Close Call Sensitivity (nominal) 140•V VHF Low1 Band 100•V VHF Low2 Band 80•V Air Band 80•V VHF High1 Band 90•V VHF High2 Band file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (4 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html110•V UHF Band 180•V 800MHz+ Band Frequency Range Frequency Range (MHz) Modulation Step (kHz) Name 25.0000-26.9600 AM 5 Petroleum Products & Broadcast Pickup 26.9650-27.4050 AM 5 CB Class D Channel 27.4100-27.9950 AM 5 Business & Forest Products 28.0000-29.6800 NFM 20 10 Meter Amateur Band 29.7000-49.9900 NFM 10 VHF Low Band 50.0000-53.9800 NFM 20 6 Meter Amateur Band 54.0000-71.9500 WFM 50 VHF TV 72.0000-75.9950 FM 5 Intersystem & Astronomy 76.0000-87.9500 WFM 50 VHF TV 88.0000-107.9000 FMB 100 FM Broadcast 108.0000-136.9916 AM 8.33 Aircraft Band 137.0000-143.9875 NFM 12.5 Military Land Mobile 144.0000-147.9950 NFM 5 2 Meter Amateur Band file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (5 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html148.0000-150.7875 NFM 12.5 Military Land Mobile 150.8000-161.9950 NFM 5 VHF High Band 162.0000-173.9875 NFM 12.5 Federal Government 174.0000-215.9500 WFM 50 VHF TV 216.0000-224.9800 NFM 20 1.25 Meter Amateur Band 225.0000-379.9750 AM 25 Military Aircraft Band 380.0000-399.9875 NFM 12.5 Military Land Mobile 400.0000-405.9875 NFM 12.5 Miscellaneous 406.0000-419.9875 NFM 12.5 Federal Government Land Mobile 420.0000-449.9875 NFM 12.5 70 cm Amateur Band 450.0000-469.9875 NFM 12.5 UHF Standard Band 470.0000-512.0000 NFM 12.5 UHF TV 758.0000-775.99375 NFM 6.25 Public Service Band 788.0000-805.99375 NFM 6.25 Public Service Band 806.0000-823.9875 NFM 12.5 Public Service Band 849.0125-868.9875 NFM 12.5 Public Service Band 894.0125-960.0000 NFM 12.5 Public Service Band 1240.0000-1300.0000 NFM 25 25 cm Amateur Band file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (6 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.htmlSpecial Functions Band Scope Function ● Frequency Span 0.2 MHz To 500 MHz ● Frequency Step 5 kHz To 100 kHz Two-Tone-Sequential ● 250.0-3500.0Hz , 0.1Hz Step Programmable WX Alert ● 1050 Hz Tone System ● NWR-SAME System (Warning / Watch / Statement) Supported trunking systems ● Motorola Systems: Type I, II, II/I (hybrid) ● EDACS Systems: FM, NFM, and SCAT ● LTR Systems ● APCO Systems: Astro Imbe, Astro 25 Dynamic memory allocation capacity ● Systems: 500 max ● Groups: 20 per system ● Site: 1000 max (All) 256 per system ● Channels: 25000 max (40128 memory blocks) ● Channels per Trunked System: 500 max Heterodyne System ● 1st IF: 380.7 to 380.8 MHz / 265.5 to 265.6 MHz ● 2nd IF: 10.8 MHz ● 3rd IF: 450 kHz CTCSS and DCS Tones file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (7 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.htmlCTCSS Tone Frequencies - 50 frequencies total (Hz) 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8 250.3 254.1 DCS Tone Codes - 104 codes total 023 025 026 031 032 036 043 047 051 053 054 065 071 072 073 074 114 115 116 122 125 131 132 134 143 145 152 155 156 162 165 172 174 205 212 223 225 226 243 244 245 246 251 252 255 261 263 265 266 271 274 306 311 315 325 331 332 343 346 351 356 364 365 371 411 412 413 423 431 432 445 446 452 454 455 462 464 465 466 503 506 516 523 526 532 546 565 606 file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (8 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html612 624 627 631 632 654 662 664 703 712 723 731 732 734 743 754 This page applies to the following scanners: BCD996XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (9 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.htmlAvailable Operation Modes To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.The scanner has several different operation modes; in each mode, the scanner's operation, display, and key functions can be completely different: ● Scan mode ● Search mode ● Hold mode ● Close Call Priority mode ● Close Call Only mode ● Close Call Do Not Disturb mode ● Priority Scan mode ● Priority Plus Scan mode ● GPS mode ● Weather mode ● Weather Priority Mode ● Weather Alert mode ● Tone Out mode ● Band Scope mode Scan mode The scanner checks each frequency in the user-programmed list of frequencies. For trunked systems, it checks each Talk Group ID in the user-programmed list. When it detects a signal, the scanner stays on the channel and opens squelch. For trunked systems, if the Talk Group ID becomes active, the scanner switches to the audio channel and opens squelch. When the signal stops, the scanner continues the scan. For information about key operation and other specifics about Scan Mode: ● BCD396XT and BC346XT: Hand Held Scanner Scan Mode ● BCD996XT: BCD996XT Scan Mode file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (1 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html● BCT15X: BCT15X Scan Mode To enter Scan mode, tap SCAN. (This is the default mode when the scanner powers on.) Search mode The scanner checks each frequency that falls within a user-programmed range. For trunked systems, it checks each control channel in the user-programmed list. When it detects a signal, the scanner stays on the channel and opens squelch. For trunked systems, when it detects an active Talk Group ID, the scanner switches to the audio channel and opens squelch. When the signal stops, the scanner continues the search. For information about key operation and other specifics about Scan Mode: ● BCD396XT and BC346XT: Hand Held Scanner Search Mode ● BCD996XT: BCD996XT Search Mode ● BCT15X: BCT15X Search Mode To enter Search mode, FUNCTION+ tap SCAN . The scanner asks if you want to perform the Quick Search: tap YES if this is the search you want. To start a different search, tap NO: the scanner takes you to the Search for... menu, and you can select your search. Hold mode The scanner stays on the current channel and enables save and edit options (options vary depending on the type of system). For more information about key operation and other specifics about hold mode: ● BCD396XT: BCD396XT Hold Mode ● BCD996XT: BCD996XT Hold Mode ● BC346XT: BC346XT Hold Mode ● BCT15X: BCT15X Hold Mode. To enter Hold mode, tap HOLD. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (2 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.htmlClose Call Priority mode In Close Call Priority, the scanner interrupts its current operation every 2 seconds, searches for signals that are stronger than other signals on the selected band, then returns to the previous operation. When it detects a close call hit, the scanner can switch to the channel and open squelch (depending on the setting). In Close Call DND (do-not-disturb) mode, the scanner only interrupts if it is not already receiving audio. For more information about key operation and other specifics about Close Call mode: ● BCD396XT or BC346XT: Handheld Scanner Close Call Mode ● BCD996XT: BCD996XT Close Call Mode ● BCT15X: BCT15X Close Call Mode To enter Close Call mode on the BCD396XT or BC346XT, FUNCTION + repeatedly tap HOLD until Close Call Pri appears. To enter Close Call mode on the BCD996XT, repeatedly tap the SQ knob until Close Call Pri appears. To enter Close Call mode on the BCT15X, Function + repeatedly tap the SQ knob until Close Call Pri appears. The Close Call icon appears for Close Call Priority mode and is in reverse colors for Close Call DND mode. Close Call Only mode The scanner stops the current operation and only performs Close Call checks as described above. For more information about key operation and other specifics about Close Call Only mode: ● BCD396XT or BC346XT: Handheld Scanner Close Call Only Mode ● BCD996XT: BCD996XT Close Call Only Mode ● BCT15X: BCT15X Close Call Only Mode file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (3 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.htmlTo enter Close Call only mode on the BCD396XT or BC346XT, FUNCTION + press & hold HOLD. To enter Close Call only mode on the BCD996XT, press and hold the SQ knob. To enter Close Call only mode on the BCT15X, FUNCTION + press & hold the SQ knob. Close Call Do Not Disturb mode When set in this mode, the scanner will periodically make Close Call checks whenever the scanner is not receiving audio in another mode. This eliminates the annoying breaks in conversation while still allowing for the Close Call functionality. In Close Call Do Not Disturb mode, the Close Call icon appears in reversed color. For more information about key operation and other specifics about Close Call Do Not Disturb mode: ● BCD396XT or BC346XT: Handheld Scanner Close Call Mode ● BCD996XT: BCD996XT Close Call Mode ● BCT15X: BCT15X Close Call Mode To enter Close Call Do Not Disturb mode on the BCD396XT or BC346XT, FUNCTION + repeatedly press HOLD until Close Call DND appears To enter Close Call Do Not Disturb mode on the BCD996XT, repeatedly press the SQ knob until Close Call DND appears. To enter Close Call Do Not Disturb mode on the BCT15X, FUNCTION + repeatedly press the SQ knob until Close Call DND appears. Priority Scan mode At a specified interval, the scanner interrupts its current operation, checks the user-designated conventional priority channels, then resumes the previous operation. You can file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (4 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.htmlset the interval for priority scan checks. If For more information about key operation and other specifics about Priority Scan mode, see Priority Scan. To enter Priority Scan mode on the BCD396XT or BC346XT: 1. Enter Hold mode. 2. FUNCTION + tap NO. To enter Priority Scan mode on the BCD996XT, press PRI while scanning. To enter Priority Scan mode on the BCT15X, FUNCTION + press POL/PRI while scanning. If no conventional channels in enabled and unlocked systems are designated as priority, the scanner will display Priority Scan No Channel. For trunked priority channels, you need to enable priority scanning in the system option menu as well as tagging the channel as priority. Trunked priority only works while scanning that system's control channel or (in the case of Motorola systems) when the scanner is scanning any channel in the system. Priority Plus Scan mode The scanner stops the current operation and only performs Priority Scan checks as described above. To enter Priority Plus Scan mode on the BCD396XT or BC346XT: 1. Enter Hold mode. 2. FUNCTION + repeatedly tap NO until the scanner displays Priority Mode Plus On. To enter Priority Plus Scan mode on the BCD996XT, while scanning repeatedly press PRI until the scanner displays Priority Mode Plus On. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (5 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.htmlTo enter Priority Plus Scan mode on the BCT15X: 1. Enter Hold mode. 2. FUNCTION + repeatedly tap POL/PRI until the scanner displays Priority Mode Plus On. GPS mode (Requires a connected GPS receiver.) The scanner displays longitude, latitude, and heading information. For more information about key operation and other specifics about GPS mode: ● For the BCD396XT or BC346XT: Handheld GPS Mode ● For the BCD996XT: BCD996XT GPS Mode ● For the BCT15X: BCT15X GPS Mode To enter GPS mode on the BCD396XT or BC346XT, FUNCTION + tap GPS. To enter GPS mode on the BCD996XT or BCT15, tap GPS. Weather mode The scanner checks each of the 10 National Weather Radio channels and opens squelch when it detects a signal. When the signal stops, the scanner continues checking the other weather channels. For more information about Weather Mode, see Weather Mode. To enter Weather mode on the BCD396XT or BC346XT, FUNCTION + press & hold WX. To enter Weather mode on the BCD996XT, press & hold WX. To enter Weather mode on the BCT15X, FUNCTION + press and hold GPS/WX. Weather Priority Mode file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (6 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.htmlIn Weather Priority mode, the scanner interrupts scanning every 5 seconds to check for an alert. If an alert tone is present, the scanner sounds an alert tone, then stays on the weather channel so you can hear the alert. For more information about Weather Priority Mode, see Weather Mode. To enter Weather Priority mode on the BCD396XT or BC346XT, FUNCTION + tap WX. To enter Weather Priority mode on the BCD996XT, tap WX. To enter Weather Priority mode on the BCT15X, FUNCTION + tap GPS/WX. Weather Alert mode This is similar to Weather mode: the scanner checks each of the 10 National Weather Radio channels and stays on a channel when it detects a signal. However, in Weather Alert mode, the scanner only opens squelch if it detects the EAS alert tone. For more information about Weather Alert Mode, see Weather Mode. To enter Weather Alert mode on the BCD396XT or BC346XT: 1. Enter Weather mode. 2. FUNCTION+ tap WX. To enter Weather Alert mode on the BCD996XT: 1. Enter Weather mode. 2. Tap WX . To enter Weather Alert mode on the BCT15X: 1. Enter Weather mode. 2. FUNCTION + tap GPS/WX. Tone Out mode file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (7 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.htmlThe scanner checks up to 10 user-programmed channels for two-tone sequential, single, or group paging tones. When it detects a tone that matches the configuration for that channel, the scanner displays the tone information and opens squelch. For more information about Tone Out Mode: ● BCD396XT or BC346XT: Hand Held Tone-Out Mode ● BCD996XT: BCD996XT Tone-Out Mode ● BCT15X: BCT15X Tone-Out Mode To enter Tone Out mode, tap MENU , then scroll down and select Tone-Out for... To exit Tone Out mode, enter Scan mode. Band Scope mode The scanner searches a frequency ranges and displays a visual representation of the signal level. For more information about Band Scope Mode: ● BCD396XT or BC346XT: Hand Held Band Scope Mode ● BCD996XT: BCD996XT Band Scope Mode ● BCT15X: BCT15X Band Scope Mode To enter Band Scope Mode: 1. Set one of the 3 search keys to a Band Scope search. 2. Enter Search mode. 3. Press & hold the designated search key. This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (8 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTMenuTree.htmlMenu tree BCD996XT main menu ● Program System ● Program Location ● Srch/CloCall Opt ● Search for... ● Close Call ● Priority Scan ● WX Operation ● Tone-Out for... ● Wired Clone ● Settings Using the menu ● To open the menu, tap MENU . ● Turn the SELECT knob to move the cursor and highlight menu items. The currently highlighted item appears in reversed-out text. ● To select the highlighted item or confirm an option setting, tap E-YES or press down on the SELECT knob. ● To cancel an option setting, press NO . ● To go back one level in the menu, tap MENU . ● To exit the menu, press LOCKOUT . The scanner goes back to the operating mode it was in before you entered the menu. This page applies to the following scanner(s): BCD996XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTMenuTree.html4/7/2009 10:08:48 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.htmlKeys and their functions ● Key Overview ● Operating the controls ❍ Using the FUNCTION button ● Key functions in different operation modes Key Overview The diagram below shows the keys and what they are called throughout the guide: Operating the controls Each button has at least two different actions which you control using the key combinations explained below. ● Tap : press the button and release it immediately ● Double tap : press the button twice, as quickly as possible (within 1 second) ● Press & hold : press the button and keep it pressed for at least 2 seconds before releasing it ● FUNCTION + tap : press and release FUNCTION , then tap the button ● FUNCTION + Double tap : press and release FUNCTION , then double tap the button ● FUNCTION + Press & hold : press and release FUNCTION , then press and hold the button Using the FUNCTION button When you tap FUNCTION (the scroll knob), the scanner remembers the FUNCTION + key combination for the next 3 seconds; during this time, it displays an F icon at the top of the screen. If you want the scanner to maintain the FUNCTION + key combination longer, press & hold FUNCTION. The scanner remembers the FUNCTION + key combination until the next time you tap FUNCTION; during this time, it displays Function Key Holding and flashes the F icon at the top of the screen. Key functions in different operation modes The keys have different functions in each operation mode: ● Scan and Search mode key functions ● Hold mode key functions ● Close Call mode key functions ● Priority Scan mode key functions file:///C|/Documents%20and%20Settings/POpitz/My%20D...mp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.html (1 of 2)4/7/2009 10:08:50 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.html● GPS mode key functions ● Tone Out mode key functions ● Band Scope mode key functions ● Available functions in Key Safe mode This page applies to the following scanner(s): BCD996XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20D...mp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.html (2 of 2)4/7/2009 10:08:50 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.htmlReading the display The display icons vary depending on the status of the scanner and what youre doing at any given time. The diagram shows common icon locations, and table below lists the most common icons and their meanings: Attenuator icon Steady: The attenuator is turned on for the current channel. Blinking: The attenuator is turned on globally (for all channels). Battery level icon x.xx: The remaining battery voltage is displayed in place of the Xs. Blinking icon: The battery is low. (If the AC adapter is connected while the icon is blinking, the battery is incorrectly installed, is the wrong type, or has gone bad.) file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (1 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.htmlChannel info icon This icon has several available states: ● P25: The received signal is digitized voice (APCO P25) ● LNK: The current channel is configured as a voice channel, but the scanner is receiving data on it. ● DAT: The current channel is configured as a control channel, and the scanner is receiving data on it. ● ENC: The received signal is encrypted P25 digitized voice, and the scanner has muted the audio. ● Cxx.x: The scanner has detected a CTCSS code; the received code is displayed in place of the Xs. ● DCSxxx: The scanner has detected a DCS code; the received code is displayed in place of the Xs. ● PNxxxx: The scanner has detected a P25 network address code (NAC); the received code is displayed in place of the Xs.Close call icon Normal (open) icon: ● Steady: Close call priority mode is on. ● Blinking: Close Call Only mode is on, or the scanner has detected a close call signal.Reversed (filled) icon: ● Steady: Close call DND mode is on. ● Blinking: Close call DND mode is on, and the scanner has detected a close call signal.file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (2 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.htmlFunction icon Steady: You tapped the FUNCTION key; the scanner will remember the FUNCTION + key combination for the next 3 seconds. Blinking: You pressed & held the FUNCTION key: the scanner will remember the FUNCTION + key combination until you tap FUNCTION again. Group number line (GRP) In Scan mode: The group Quick Key numbers (GQK) of any unlocked groups in the current system or site are displayed on this line. The GQK number of the group that is currently being scanned blinks. In Hold mode: This line displays the GQK number of the current group only. In Custom Search mode: The numbers of any programmed search ranges are display on this line. The number of the custom range that is currently being searched blinks. Hold icon The scanner is in Hold mode. IFX icon You switched to the intermediate frequency (IF exchange). Keypad lock (or GPS) icon : The keypad is locked. GPS: The scanner is receiving data from the GPS device. Lockout icon The current channel is locked out. Modulation icon This icon displays the modulation type of the current channel: AM, FM, NFM, FMB, or WFM. Priority icon The current channel is set as a priority channel. Priority scan icon (PRI) Steady: Priority scan is turned on. Blinking: Priority Plus scan is turned on. REP icon The Repeater Find feature is turned on. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (3 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.htmlSignal level icon This icon displays the strength of the current signal; the icon ranges from zero bars (no signal) to five bars (strong signal). System number line (Sx:) In Scan mode: The system/site Quick Key numbers (SQK) of any unlocked systems or sites are displayed on this line. The SQK number of the system or site that is currently being scanned blinks. For SQK numbers above 9, the tens digit replaces the X in the icon; the ones digits are shown on this line. In Hold mode: This line displays the SQK number of the current system or site only. For SQK numbers above 9, the tens digit replaces the X in the icon; the ones digit is displayed on this line. In Service Search mode: The icon SCR replaces the System numbers if the broadcast screen feature is turned on. Weather alert icon Weather Alert Priority scan is turned on. Special displays In some operation modes, the display can be very different from the main display. These modes also have 2 or 3 different displays you can cycle through. ● Band Scope mode display ● Hold mode displays ● GPS mode display This page applies to the following scanner(s): BCD396XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (4 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html● Included With Your Scanner ● Setting Up Your Scanner ❍ Power Related Issues ❍ Base Station ❍ Setting Up an Audio Recording Device or Computer Recording ❍ Vehicle Installation ■ Mounting Using the Bracket ■ Mounting Using the DIN-E Sleeve (Option for BCT15X) ■ Removing the Scanner from the DIN-E Sleeve ■ Mounting Using ISO Technique ❍ Removing the Display Sticker ❍ Connecting an Optional Antenna ❍ Connecting an Earphone/Headphone ❍ Connecting an Extension Speaker Included With Your Scanner Scanner AC Adapter Vehicle Accessory Power Cord Three-Wire Harness Mounting Bracket and Hardware Antenna Serial Programming Cable O/M on CD ROM Other Printed Materials Setting Up Your Scanner These guidelines will help you install and set up your new scanner: file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (1 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.htmlThe scanner can be placed on a convenient surface in your home as a base station, and connected to a standard outlet that supplies 120VAC, 60Hz. You must use either the supplied antenna or an electrically correct outdoor antenna, properly and safely mounted at your chosen site. The scanner is also designed to accommodate either DIN-E and ISO-DIN automotive mounting configurations. A DIN-E sleeve and keys, (Part Number DIN-0001) are optional and available from Uniden. The unit can also be placed above, beneath, or in the dash of your vehicle using the supplied bracket and mounting hardware. ● If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source. ● To improve the scanner’s reception, use an optional external antenna designed for multi-band coverage. (You can purchase this type of antenna at a local electronics store). If the optional antenna has no cable, use 50-75 Ω coaxial cable for lead-in. A mating plug might be necessary for the optional antennas. ● Use an optional mono earphone or mono headset with proper impedance (32 Ω) for private listening. Read the precautions at General Precautions. ● Do not use the scanner in high-moisture environments such as the kitchen or bathroom. ● Avoid placing the scanner in direct sunlight or near heating elements or vents. Power Related Issues Important: To prevent memory from being corrupted, do not unplug the AC adapter during the time the memory is accessed for programming or auto store. Notes: ● If when you connect the AC adapter the [VOL] /Power Switch is ON, the scanner may not power on. Should this occur, simply turn the control OFF, then ON again. ● If the scanner loses power (as when you turn off your car’s ignition with the scanner’s power switch on), it can lose some system settings such as display color and backlight. To ensure that such settings persist, either change thesetting using the scanner’s menu or power the scanner off then back on using the power switch after making such setting changes. When you turn off the scanner using the power switch, the scanner remembers the last settings and mode. When you turn power back on, it resumes the previous mode. Base Station This is the simplest approach to let you get started quickly. Decide on a location that is convenient to a nearby wall outlet, has desk space to let you complete your programming worksheets, will safely allow the indoor antenna to be extended, or near a window to use an outdoor antenna. To secure the radio to a surface, by means of the mounting bracket, follow the steps below: 1. Attach the four protective mounting feet to the mounting bracket when you casually use the scanner on a flat surface. Should you desire to permanently mount the scanner, remove the feet and use wood screws through the bracket as described in Steps 2 and 3. 2. Use the bracket as a template to mark positions for the two mounting screws. file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (2 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html3. At the marked positions, drill holes slightly smaller than the screws. 4. Align the bracket with the threaded holes on the sides of the radio case so the bracket is beneath the radio. Secure the bracket using the two threaded knobs. Never overtighten the knobs. Once the radio is positioned, connect it to a source of AC power using the supplied 13.8V, 750 mA AC adapter. Insert the barrel of the AC adapter to the jack on the rear, upper right side of the radio marked. Insert the connector of the supplied indoor telescoping antenna to the BNC Antenna Connector and apply moderate pressure to secure it. Setting Up an Audio Recording Device or Computer Recording It is best if you plan ahead when you initiate the basic setup of the scanner if you include the components to record incoming reception. You need an audio recording device which can be controlled by a Voice Operated module (VOX) either externally or from within the unit and the correct connecting cable. The REC (record) jack on the rear apron provides a constant-level audio output which is not affected by the setting of the volume control. Use a mono or stereo cable that ends in a 3.5mm plug for the scanner. The recorder might have its own requirements as to the proper plug. Check the recorder’s instructions to be sure. Connect the cable to an external or internal VOX control so that the recorder operates when audio is present. You can also connect the cable to the appropriate input jack on your PC so that with controlling software, you can record to your hard disk. In order for the function to operate, you must set the channel to record. You must also set the system’s record option to either All Channel, which will record all channels regardless of any channel’s setting, or Marked Channel which only lets recording occur if you have selected record for that channel. Which you choose will depend on various factors. Vehicle Installation You can mount your scanner in your vehicle, using either the supplied bracket or the optional DIN-E sleeve. Mounting Using the Bracket With the bracket removed from the radio, use the holes in the bracket as a template to initially mark the location you plan to use in your vehicle. Be absolutely certain of what might be behind the mounting surface before making any holes, be it above, or below, or in front of your dash, armrest console, or other location. If you drill carelessly, expensive damage can result. If in doubt, consult your vehicle dealer’s service department or a qualified professional installer. Important: AVOID AIRBAG DEPLOYMENT ZONES. Ignoring this installation concern may result in bodily harm and the inability of the airbag to perform properly. file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (3 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html 1. Using appropriate screws or other hardware, secure the bracket. 2. Insert the scanner and insert the bracket knobs to lock the scanner in position. 3. Attach the Cigarette Lighter Power Cord to the rear of the scanner and plug the adapter end into a dash mounted 12V DC socket. 4. Attach a suitable mounted mobile antenna to the antenna jack on the back of the scanner. Mounting Using the DIN-E Sleeve (Option for BCT15X) If you are unsure about how to install your scanner in your vehicle using the optional DIN-E sleeve, consult your automobile manufacturer, dealer, or a qualified installer. Before installing, confirm that your scanner fits in the desired mounting area and you have all the necessary materials to complete the task. Your scanner requires a 2 x 7-1/8 x 5-5/16 inch (50 x 180 x 135 mm) mounting area. Allow an additional 2-3/8 inch (60mm) space behind the unit for connectors and wires. To purchase the DIN-E sleeve and included Removal Keys, visit http://www.unidendirect.com/ and order part number, DIN-0001. 1. Remove the bracket if it is attached. 2. Remove the four Philips screws from four small tabs on the rear of the case that secure the outer metal case and pull off the case (toward the rear) with care. 3. Install the DIN sleeve into the opening in your dashboard, lip facing out. 4. Push out the top and bottom tabs to hold the sleeve firmly in place. 5. Before inserting the scanner in the sleeve, attach the cable from the previously mounted antenna. Attach the DC Power leads. RED goes to a positive (+)connection on your fuse block while BLACK connects to the vehicle’s chassis ground (-). 6. Connect the ORANGE lead to one side of the headlamp switch so that when you activate the headlights, the scanner’s LCD display changes intensity. Be sure all the connections are routed away from any potentially pinching or slicing sheet metal. 7. Slowly slide the scanner into the sleeve until it locks in place. 8. To remove the unit, fully insert the removal keys into each slot on the left and right edges of the front panel. Carefully slide the radio from the sleeve. Note: If you plan to connect a GPS unit or external speaker at a later time, expect to remove the unit for ease of making those connections. Removing the Scanner from the DIN-E Sleeve If you plan to connect other devices or wires to the radio, such as a GPS unit, at a later time, you should plan to remove the scanner from the DIN-E sleeve. This is easily done using the provided Removal Keys that come with the optional DIN-E sleeve. file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (4 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.htmlRefer to the illustration that follows, showing the Removal Keys. Fully insert both Removal Keys into the slots on the left and the right edges of the radio’s dress panel. You cannot remove the radio with only one key. Press in fully,and do not twist the keys. The radio will unlock from the sleeve making withdrawal from the sleeve possible. Store the keys in a safe place for future use. Mounting Using ISO Technique Some vehicles can take advantage of another approach to mounting a radio in a vehicle, called the ISO technique. However, this technique requires a very detailed and thorough knowledge of the technique. Therefore, we strongly suggest that if you have any doubt about your experience and abilities, please consult with a professional installer who is familiar with the ISO approach to radio installation. To begin the process, it is first necessary to remove the scanner’s outer metal sleeve from the inner chassis. Unthread the four screws in the rear of the unit. Slide the cover toward the rear and off. Once the sleeve is removed, you will see threaded, metric machine screw holes on either side of the chassis cabinet. Uniden does not supply these screws. Their diameter, length, and screw type should be chosen by a qualified installer based on the internal vehicle bracket which will be used in securing the scanner chassis. Once the original radio is removed from the vehicle dash and the fit of the scanner is correct, be sure to connect all the power, audio, antenna, and any other cables or wires, to the scanner before the scanner is secured. The following illustration is a typical example of the ISO technique and the general side mounting screw holes often encountered. It does not actually represent the Uniden scanner nor your vehicle’s mounting bracket. Only a professional installer will be able to determine the best and correct approach. file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (5 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html Removing the Display Sticker Before you use the scanner for the first time, remove the protective plastic film over the display. Connecting an Optional Antenna The scanner’s BNC connector makes it easy to connect a variety of optional antennas, including an external mobile antenna or outdoor base station antenna. Note: Always use 50- or 75-ohm, RG-58, or RG-8, BNC terminated coaxial cable to connect an outdoor antenna. If the antenna is over 50 feet from the scanner, use RG-8 low-loss dielectric coaxial cable. Cable loss increases with higher frequency. Connecting an Earphone/Headphone For private listening, you can plug a 1/8-inch (3.5 mm) mini-plug earphone or headphones (not supplied) into the headphone jack on the front of your scanner. This automatically disconnects the internal speaker. See the Earphone Warning for important information about using an earphone/headphone. WARNING! Never connect anything other than the recommended amplified extension speaker to the scanner’s headphone jack. Damage to the scanner might occur. Connecting an Extension Speaker In a noisy area, an optional amplified extension speaker, positioned in the right place, might provide more comfortable listening. Plug the speaker cable’s 1/8-inch (3.5-mm) mini-plug into your scanner’s back-panel Ext. Sp. Jack. WARNING! Never connect any part of the headphone jack to the antenna jack or connect the radio to an installation where the antenna and audio connection are grounded. This might also damage the scanner. This page applies to the following scanner(s): BCD996XT BCT15X Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (6 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileConnectingAGPSReceiver.htmlConnecting a GPS receiver To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.● Compatible GPS receivers ● Configuring your scanner ● Connecting the receiver ● Troubleshooting Compatible GPS receivers You can connect your scanner to any GPS receiver that meets the following criteria: ● Outputs NMEA-0183 v3.01-compliant location data ● Outputs both the Global Positioning System Fix ( GGA ) and Recommended Minimum Specific GNSS ( RMC ) data sentences ● Provides a serial data (RS-232) connection Configuring your scanner 1. Go to the Settings menu and select Set Serial Port . 2. Select _Set Baud Rate|. 3. Select Set Rear Port. 4. Select 4800 bps for the baud rate. Connecting the receiver file:///C|/Documents%20and%20Settings/POpitz/My%20Do...temp/UnidenManBeta/MobileConnectingAGPSReceiver.html (1 of 3)4/7/2009 10:08:56 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileConnectingAGPSReceiver.html 1. Plug your GPS receiver's RS232 cable directly into the DB9 connector on the back of the scanner. 2. When the scanner recognizes the GPS input, it displays a confirmation message and shows the GPS icon on the display. 3. If the GPS receiver does not have a lock on the satellites, the scanner displays Searching for Satellite . Troubleshooting If you can't get the scanner to recognize the GPS receiver: ● Check the receiver's baud rate. Most compatible GPS receivers use a baud rate of 4800 bps, but it's possible your receiver is using a non-standard baud rate. Set the scanner's baud rate to match the GPS receiver's. ● Check the receiver's output mode. Some receivers have proprietary signalling modes that are not NMEA compliant, but you can usually set them to use a NMEA compliant mode. If the scanner recognizes the GPS receiver but doesn't lockout systems as you expected: ● Make sure the GPS receiver has a lock on the satellites. ● Check the location configuration for the sites and channel groups in the system. 1. For each site or channel group, go to the Set LocationInfo menu. file:///C|/Documents%20and%20Settings/POpitz/My%20Do...temp/UnidenManBeta/MobileConnectingAGPSReceiver.html (2 of 3)4/7/2009 10:08:56 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileConnectingAGPSReceiver.html2. Check the range, latitude, and longitude settings to make sure they are correct. 3. Make sure the Set GPS Enable option is set to Yes . This page applies to the following scanner(s): BCD996XT BCT15X Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Do...temp/UnidenManBeta/MobileConnectingAGPSReceiver.html (3 of 3)4/7/2009 10:08:56 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.htmlNumber Tags ● Number Tags let you quickly navigate to a specific system or channel. ● You can assign Number Tags at the system level ( System Number Tag , or SNT), at the channel level ( CHannel Number Tag , or CHNT), or at both levels. ● You can assign an SNT to the temporary system Close Call Hits that is created during Close Call searches. This system and its SNT operate like any other system. ● You can assign Number Tags to service searches and custom search ranges. These search Number Tags operate like regular SNTs. ● Programming Number Tags ❍ Assigning an SNT ❍ Assigning a CHNT ● Using Number Tags Programming Number Tags Assigning an SNT ● SNTs can range from 0 to 999 . ● No two systems can have the same SNT. (This includes SNTs assigned to the Close Call Hits system or any search ranges.) To a system : 1. Open the Program System menu. 2. Select the system you want to assign the number tag to. 3. Select Edit Sys Option, then select Set Number Tag. 4. Enter the number tag you want to use for this system. To the Close Call Hits system : 1. Open the Close Call menu. 2. Select Hits with Scan, then select Set Number Tag. 3. Enter the number tag you want to use for the Close Call Hits system. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html (1 of 3)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.htmlTo a service search range : 1. Open the Search for... menu. 2. Select Edit Service, then select the service search range you want to assign the number tag to. 3. Select Search with Scan, then select Set Number Tag. 4. Enter the number tag you want to use for this search range. To a custom search range : 1. Open the Search for... menu. 2. Select Edit Custom, then select the custom search range you want to assign the number tag to. 3. Select Search with Scan, then select Set Number Tag. 4. Enter the number tag you want to use for this custom search range. Assigning a CHNT ● You can assign CHNTs to channels even if the system does not have an assigned SNT. However, without an SNT, you can only navigate to these channels from within that system itself. ● CHNTs must be unique within their own system, but you can re-use CHNTs in other systems. ● CHNTs can range from 0 to 999 . 1. Open the Program System menu. 2. Select the system containing the channel you want to assign the number tag to. 3. Select Edit Group, then select the channel group you want. 4. Select Edit Channel, then select the channel you want to assign the number tag to. 5. Select Set Number Tag. 6. Enter the number tag you want to use for this channel. Using Number Tags To navigate directly to: Key Sequence Example file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html (2 of 3)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.htmlA system or search range 1. Tap HOLD. 2. Enter the SNT + •. 3. Tap MENU. If the SNT is 4 , enter HOLD / 4 / • / MENU. A channel in the current system 1. Tap HOLD. 2. Enter the CHNT. 3. Tap MENU. If the CHNT is 27, enter HOLD / 27 / MENU. A channel in a different system 1. Tap HOLD. 2. Enter the SNT followed by the decimal point. 3. Enter the CHNT. 4. Tap MENU.If the SNT is 4 and the CHNT is 27, enter HOLD / 4 / • / 27 / MENU. This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html (3 of 3)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.htmlQuick Keys ● Quick Keys let you enable or disable systems and channel groups during a scan. Disabled systems and channel groups are ignored during scans. ● You can assign Quick Keys at the system/site level ( System/site Quick Key , or SQK ), at the channel group level ( Group Quick Key , or GQK ), or at both levels. ● You can assign an SQK to the temporary system Close Call Hits that is created during Close Call searches. This system and its SQK operate like any other system. ● You can assign Quick Keys to service searches and custom search ranges. These search Quick Keys operate like regular SQKs. ● Programming Quick Keys ❍ Assigning an SQK ❍ Assigning a GQK ● Using Quick Keys ❍ To use SQK 0 through 9 ❍ To use SQK 10 through 99 ❍ To use a GQK Programming Quick Keys Assigning an SQK ● Multiple systems, sites, and search ranges can share the same SQK. ● All systems and sites assigned to the same SQK will be enabled (or disabled) when you enter the Quick Key. ● SQKs range from 0 to 99 . To a conventional system: 1. Open the Program System menu. 2. Select the system you want to assign the Quick Key to. 3. Select Edit Sys Option, then select Set Quick Key. 4. Enter the Quick Key you want to use for this system. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (1 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.htmlTo a trunked system: 1. Open the Program System menu. 2. Select the system you want to assign the Quick Key to. 3. Select Edit Site, then select the site you want. 4. Select Set Quick Key, then enter the Quick Key you want to use for this site. To the Close Call Hits system : 1. Open the Close Call menu. 2. Select Hits with Scan, then select Set Quick Key? . 3. Enter the Quick Key you want to use for the Close Call Hits system. To a service search range : 1. Open the Search for... menu. 2. Select Edit Service, then select the service search range you want to assign the Quick Key to. 3. Select Search with Scan, then select Set Quick Key. 4. Enter the Quick Key you want to use for this search range. To a custom search range : 1. Open the Search for... menu. 2. Select Edit Custom, then select the custom search range you want to assign the Quick Key to. 3. Select Search with Scan, then select Set Quick Key. 4. Enter the Quick Key you want to use for this custom search range. Assigning a GQK ● All channels in the channel group will be enabled (or disabled) when you enter the GQK. ● Multiple channel groups in the same system can share the same GQK. However, all of these channel groups will be enabled (or disabled) when you enter the GQK from within that system. ● You can assign GQKs to channel groups even if their system does not have an assigned SQK. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (2 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html● You can only use GQKs within the current system: the GQK will not affect a channel group in another system. ● GQKs range from 0 to 9 . 1. Open the Program System menu. 2. Select the system containing the channel group you want to assign the Quick Key to. 3. Select Edit Group, then select the channel group you want. 4. Select Set Quick Key, then enter the Quick Key you want to use for this channel group. Using Quick Keys ● Quick Keys only work in Scan mode. ● Entering the Quick Key toggles the enabled/disabled state of the system/site/search range or channel group (i.e., if the system is currently enabled, entering the Quick Key will disable it, and vice-versa). To use SQK 0 through 9 ● Enter Scan mode. ● Tap the number key that matches the SQK. (For example, if the SQK is 4, just enter 4.) ● Any systems, sites, or search ranges assigned to this SQK become disabled. (If they were already disabled, they become enabled.) To use SQK 10 through 99 ● Enter Scan mode. ● Tap the decimal point ( ./NO ), then enter the SQK. (For example, if the SQK is 32 , enter ./NO / 32.) ● Any systems, sites, or search ranges assigned to this SQK become disabled. (If they were already disabled, they become enabled.) To use a GQK ● Enter Scan mode. ● Go to the system that contains the channel group you want to enable or disable. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (3 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html● Tap FUNCTION , then tap the number key that matches the GQK. (For example, if the GQK is 7 , enter FUNCTION / 7.) ● Any channel groups assigned to this SQK within the current system only become disabled. (If they were already disabled, they become enabled.) This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (4 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SearchKeys.htmlSearch Keys The scanner has three Search Keys that you can assign to a special search range; the Search Keys are set to number keys 1 , 2 , and 3 : Search Key 1 Search Key 2 Search Key 3Programming Search Keys 1. Open the Search for... menu. 2. Select Set Search Key, then select the search key you want to program. 3. Select the search range you want to assign to this Search Key. Choose one of the pre-programmed service search ranges, one of the 10 custom search ranges, a Tone-Out search, or a Band Scope search. If the Search Key you selected starts a Tone-Out search, the scanner switches to Tone-Out mode and searches the most-recently-used Tone-Out channel (out of the 10 available). If you want to search a different Tone-Out channel, use the SELECT-VOLUME-SQUELCH knob to select the Tone-Out channel you want to use. Using Search Keys To start the search assigned to a Search Key, FUNCTION + tap that Search Key. For example, to start the search assigned to Search Key 2, FUNCTION + tap 2 . (You can't use the Search Keys when the scanner is in Scan mode or GPS mode.) This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SearchKeys.html4/7/2009 10:08:58 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.htmlProgramming locations To use Location-based Scanning with a particular system, you will need to program your scanner with the geographic coordinates you want to use for each site or channel group. You can also program your scanner to alert you when you approach particular locations. ● Programming a location for a site ● Programming a location for a channel group ● Programming general locations ❍ To create a new location ❍ For Dangerous Xing and Dangerous Roads only ❍ Edit an existing location Programming a location for a site Each system site can have separate location information. 1. Open the Program System menu. 2. Select the system you want to program for location based scanning. 3. Select Edit Site, then select the first site you want to assign a location to. 4. Select the Set LocationInfo menu and enter the latitude, longitude, and range for this site. 5. Change the Set GPS Enable field to On . 6. Go back to the Edit Site menu and repeat these steps with any other sites you want to program for this system. Programming a location for a channel group Each channel group in a system can have separate location information. 1. Open the Program System menu. 2. Select the system you want to program for location based scanning. 3. Select Edit Group, then select the first channel group you want to assign a location to. 4. Select the Set LocationInfo menu and enter the latitude, longitude, and range for this site. 5. Change the Set GPS Enable field to On . 6. Go back to the Edit Group menu and repeat these steps with any other sites you want to program for this system. Remember: You have to turn on Set GPS Enable before the location information file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html (1 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.htmlcan effect that site or channel group. Programming general locations You can program general locations (i.e., locations that are not associated with a site or channel group). There are three types of general locations: ● points of interest ( POI ) ● intersections ( Dangerous Xing ) ● roads ( Dangerous Road ) You can program the scanner to alert you when you come within a designated distance of that location. To create a new location 1. Open the Program Location menu. 2. Select the type of location you want to create. 3. Select New Location to create a new location of this type. 4. *If you want to create a different type of location, go back to the Program Location menu and select that location type. 5. If you want to change the default location name, select Edit Name? and enter a new name. 6. Select Set LocationInfo? and enter the latitude and longitude for this location. 7. Select Set Range and enter the distance from this location you want the scanner to alert you. 8. Choose the Alert Tone and Alert Light you want the scanner to use when you come within range of this location. For Dangerous Xing and Dangerous Roads only file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html (2 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.htmlIn addition to range, you can specify a heading and a speed limit for these types of locations: ● If you set a speed limit, the scanner will only trigger an alert when you are within the location's range and your current speed is over the programmed speed limit. ● If you set a heading, the scanner will only trigger an alert when you are within the location's range and your current heading is +/- 45 degrees from the programmed heading. (For example, if you set the heading as North , the scanner will trigger an alert if your current heading is North-east but not if your current heading is due East .) Edit an existing location 1. Open the Program Location menu. 2. Select the type of location you want to edit; the scanner lists the existing locations of that type in alphabetical order. 3. Select the location you want to edit, then change any of the location settings you want. This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html (3 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.htmlSetting alerts Your scanner can trigger alerts for several different events. The table below shows the different alerts and how to program them: To sound an alert when Follow these steps A channel becomes active Edit the channel properties (Edit Channel#Set Alert): 1. Go to the Program System menu and select the system that contains the channel you want set the alert for. 2. Select Edit Group , then select the group you want. 3. Select Edit Channel, then select the channel you want to set the alert for. 4. Select Set Alert . 5. Choose the Alert Tone and Alert Light you want the scanner to use.An active Talk Group on a system contains an emergency flag Edit the system properties (Edit Sys Option#Emergency Alert): 1. Go to the Program System menu and select the system you want set the alert for. 2. Select Edit Sys Option, then select Emergency Alert . 3. Choose the Alert Tone and Alert Light you want the scanner to use.file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html (1 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.htmlThe scanner detects a Close Call hit Edit the Close Call properties: 1. Go to the Close Call menu. 2. Select Set CC Alert . 3. Choose the Alert Tone and Alert Light you want the scanner to use. 4. For Close Call Alerts, you can also have the scanner pause before it resumes searching. Select Set CC Pause to activate this feature.The scanner gets a hit on a Tone-Out channel Edit the Tone-Out channel properties: 1. Go to the Tone-Out for... menu. 2. Select Tone-Out Setup , then select the Tone-Out channel you want to set the alert for. 3. Select Set Alert . 4. Choose the Alert Tone and Alert Light you want the scanner to use.You approach a particular location ● Point of Interest( POI ) ● Dangerous Road ● Dangerous Intersection ( Dangerous Xing )Edit the location properties: 1. Go to the Program Location menu and select the type of location you want set the alert for. 2. Select the particular location. 3. For a POI, select Set Alert , then choose the Alert Tone and the Alert Light you want to use. 4. For a Dangerous Road or Xing, the alert tone is preset. Select the Alert Volume and the Alert Light you want to use. NOTE: The scanner also triggers alerts for Weather Alerts (WX Operation#Weather Alerts), but you can't edit the alert tone and light. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html (2 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.htmlThis page applies to the following scanner(s): BCD996XT BCT15X BC346XT BCD396XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html (3 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UsingQuickKeysStartupKeysAndSearchKeys.htmlUsing Quick Keys, Startup Keys, and Search Keys The different shortcut keys have different functions: Quick Keys ● Quick keys let you enable and disable systems and channel groups (disabled systems and channel groups are ignored during scans). ● You must be in Scan mode to use Quick Keys. ● System Quick Keys (SQKs) let you enable or disable systems, sites or search ranges: just enter the SQK from the number pad. ● Group Quick Keys (GQKs) let you enable or disable channel groups inside the current system: Tap FUNCTION , then enter the GQK from the number pad. Startup Keys ● Startup Keys let you lock and unlock several systems, sites, and search ranges all at the same time. ● When you activate a Startup Key, the scanner unlocks all systems, sites, and search ranges that are assigned to that same Startup Key; the scanner also locks all systems, sites, and search ranges that are assigned to a different Startup Key. ● To activate a Startup Key, press & hold the number key while you power the scanner on. Search Keys ● Search Keys let you quickly start one of 3 programmed searches. ● To start the search assigned to a Search Key, FUNCTION + tap that Search Key. This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Docum...idenManBeta/UsingQuickKeysStartupKeysAndSearchKeys.html4/7/2009 10:09:00 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.htmlTone Out mode To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.With the tone out feature, the scanner monitors up to 10 different channels for paging tones (two-tone sequential, single tone, and group tone). Normally, the scanner monitors each of the 10 channels in turn. However, if any tone-out channels share the same frequency, modulator, and attenuator settings, the scanner checks these channels simultaneously. Configuring Tone Out channels To configure Tone-Out channels: 1. Go to the Tone-Out for... menu. 2. Select Tone-Out Setup . 3. Select the Tone-Out channel ( Tone-Out 1 through Tone-Out 10 ) you want to configure. 4. Select Set Frequencies and choose the frequencies for this channel 5. Select Set Tone and program Tone A and Tone B. 6. Set any of the other properties as you prefer (they aren't required). Required Frequencies ( Set Frequencies) Tone A and Tone B ( Set Tones) Recommended Name ( Edit Name) Optional Automatic Gain Control ( Set Audio AGC)* Delay Time ( Set Delay Time) Alert ( Set Alert) file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (1 of 4)4/7/2009 10:09:01 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html*digital scanners only Using Tone-Out Mode To start a Tone-Out search: 1. Tap MENU . 2. Scroll down and select Tone-Out for... 3. Select Tone-Out Standby to start the search. ● The scanner starts searching the most recently-used Tone-Out channel (and any other Tone-Out Channels that have the same frequency). ● If you want to search a different channel, just turn the SELECT-VOLUME-SCROLL knob until you find the channel you want. ● To exit Tone-Out mode, tap SCAN . Key operation in Tone Out Mode ● Turn the SELECT-VOLUME-SCROLL knob to change the channel. ● FUNCTION + tap MENU to go to the Tone-Out for... menu. Key Name (2nd operation)Action On HOLD (Close Call) 1 (Search 1) 2 (Search 2) 3 (Search 3)Tap Enter Hold mode (the scanner opens squelch). Enter the number on the key. FUNCTION + Tap Toggle Close Call modes. Start the search range assigned to this Search Key. FUNCTION + Press & hold Enter Close Call Only mode. NA NA NA file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (2 of 4)4/7/2009 10:09:01 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.htmlKey Name (2nd operation)Action on: Scan (Search) 4 (IF exchange) 5 (Volume offset) 6 (Display mode)Tap Enter Scan mode. Enter the number on the key FUNCTION + Tap Display the Quick Search screen (enter Search mode). Switch to the intermediate frequency (IF). NA NA Key Name (2nd operation)Action on: Lockout 7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)Tap NA Enter the number on the key. FUNCTION + Tap NA Toggle the attenuator state for this channel. NA Change the modulation. FUNCTION + Press & hold NA Toggle the attenuator state for all signals. NA NA file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (3 of 4)4/7/2009 10:09:01 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.htmlKey Name (2nd operation)Action on: Backlight (Power, Lock) No (Decimal, Priority) 0 (Weather) Yes (Enter, GPS)Tap Turn on the LCD backlight. During a system message: Cancel the message and exit that screen. Enter the number on the key. Edit the current Tone-Out channel. Press & hold Turn the scanner on or off. NA NA NA FUNCTION + Tap Lock or unlock the keypad. NA Change the WX Alert Priority settings. Enter GPS mode. FUNCTION + Press & hold NA NA Enter Weather mode. NA This page applies to the following scanner(s): BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (4 of 4)4/7/2009 10:09:01 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.htmlClose Call mode To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.When the scanner is in Close Call mode, it performs a close call check every 2 seconds. The scanner switches to the selected bands and searches for unusually strong signals (indicating the transmitter is probably somewhere close by). After the close call check, the scanner returns to its previous function. In Close Call Do Not Disturb mode, the scanner does not perform a Close Call check if it is already receiving an audio transmission. This prevents the audio from cutting out every 2 seconds. In Close Call Only mode, the scanner only performs Close Call checks. The Close Call menu lets you change the operation settings of the Close Call feature. You can change the overall Close Call options through the Srch/CloCall Opt menu. Key operation in Close Call Only mode ● Turn the SELECT-VOLUME-SCROLL knob to resume searching. ● FUNCTION + tap MENU to go to the Close Call menu. Key Name (2nd operation) Action on: Hold (Close Call) 1 (Search 1) 2 (Search 2) 3 (Search 3) Tap When the scanner detects a Close Call hit: Enter Hold mode. Disable the Close Call band associated with this key. Tap again to enable. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html (1 of 3)4/7/2009 10:09:03 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.htmlFUNCTION + Tap Toggle Close Call mode. Start the search assigned to this Search Key. Key Name (2nd operation) Action on: Scan (Search) 4 (IF exchange) 5 (Volume offset) 6 (Display mode) Tap Enter Scan mode. Disable the Close Call band associated with this key. Tap again to enable. FUNCTION + Tap Display the Quick Search screen (enter Search mode). Switch to the intermediate frequency (IF). NA NA Key Name (2nd operation) Action on: Lockout 7 (Attenuation) 8 (Reverse freq.) 9 (Modulation) Tap Temporarily lock out the current Close Call frequency (until you turn the scanner off). Disable the Close Call band associated with this key. Tap again to enable. NA NA Double tap Permanently lock out the current Close Call frequency. NA NA NA Press & hold Unlock all Close Call and Search frequencies. NA NA NA FUNCTION + Tap Review the list of locked out IDs. Toggle the attenuator state for this channel. NA Change the modulation. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html (2 of 3)4/7/2009 10:09:03 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.htmlFUNCTION + Press & hold NA Toggle the attenuator state for all signals. Show the reverse frequency for the current frequency. (The scanner returns to the current frequency when you release the key.) NA Key Name (2nd operation) Action on: Backlight (Power, Lock) No (Decimal, Priority) 0 (Weather) Yes (Enter, GPS) Tap Turn on the LCD backlight. During a system message: Cancel the message and exit that screen. NA When monitoring a Close Call frequency: store the current frequency. Press & hold Turn the scanner on or off. NA NA NA FUNCTION + Tap Lock or unlock the keypad. NA Change the WX Alert Priority settings. Enter GPS mode. FUNCTION + Press & hold NA NA Enter Weather mode. NA This page applies to the following scanner(s): BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html (3 of 3)4/7/2009 10:09:03 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.htmlBand Scope mode Band Scope mode is a special type of Search mode where the scanner displays the strength of any signal it finds. ● In a band scope search, the scanner starts at the lowest frequency in the range and moves up the search range. ● In Max Hold Search mode, the scanner displays the strongest signal that it found. To turn on Band Scope mode: Band Scope mode is the default setting for Search Key 3. To turn on Band Scope mode, enter Search mode, then tap FUNCTION + 3 (SR3) . (To change the Search Key assignment, see Search Keys#Programming Search Keys.) Reading the display in Band Scope mode file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (1 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html Key operation in Band Scope mode file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (2 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.htmlKey Name (2nd operation) Action on: Hold (Close call) 1 (Search 1) 2 (Search 2) 3 (Search 3) Tap Enter Hold mode. NA NA NA FUNCTION + Tap Toggle Close Call modes. NA NA NA FUNCTION + Press & hold Enter Close Call Only mode. NA NA NA Key Name (2nd operation) Action on: Scan (Search) 4 (IF exchange) 5 (Volume offset) 6 (Display mode) Tap Enter Scan mode. NA NA NA FUNCTION + Tap Change the band scope search type. NA NA NA Key Name (2nd operation) Action on: Lockout 7 (Attenuation) 8 (Reverse freq.) 9 (Modulation) FUNCTION + Tap NA Toggle the attenuator state for the current signal. NA Change the modulation. file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (3 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.htmlFUNCTION + Press & hold Unlock all items regardless of type. Toggle the attenuator state for all signals. NA NA Key Name (2nd operation) Action on: Backlight (Power, Lock) No (Decimal, Priority) 0 (Weather) Yes (Enter, GPS) Tap Turn on the LCD backlight. During a system message: Cancel the message and exit that screen. NA NA Press & hold Turn the scanner on or off. NA NA NA FUNCTION + Tap Lock or unlock the keypad. NA Change the Weather Alert Priority settings. Enter GPS mode. FUNCTION + Press & hold NA NA Enter Weather mode. NA This page applies to the following scanner(s): BCD396XT BC346XT UsersGuide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (4 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.htmlGPS mode To determine whether the information on this page applies to your scanner, see the tags at the bottom of the page.You must have a compatible GPS receiver connected! ● See Also ● Reading the display in GPS mode ❍ Main GPS display ❍ Location alert display ❍ Location review display ● Key operation in GPS mode See Also GPS mode is only one small part of location-based scanning. For more information on using your scanner with a GPS receiver, see the following links: Location-based Scanning contains ● an overview of why you might want to use a GPS receiver with your scanner ● an explanation of two different approaches to location-based scanning ● some information on fining antenna locations Programming locations contains ● details on how to program locations for systems, sites, and channels ● details on how to program Points of Interest ( POI ), Dangerous Roads, and Dangerous Intersections ( Dangerous Xing ) ● information on reviewing and editing locations Connecting a GPS receiver contains ● details on which GPS receivers are compatible ● instructions on connecting a GPS receiver ● troubleshooting tips if you can't the receiver working with the scanner Reading the display in GPS mode There are several displays available in GPS mode. Main GPS display file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (1 of 5)4/7/2009 10:09:06 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html Location alert display file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (2 of 5)4/7/2009 10:09:06 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html Location review display file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (3 of 5)4/7/2009 10:09:06 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html Key operation in GPS mode Key Name (2nd operation) Action on: Hold (Close call) 1 (Search 1) 2 (Search 2) 3 (Search 3) Tap Toggle Hold mode on the scan or search running in the background. When reviewing locations: Enter Scan Hold mode. NA NA NA Key Name (2nd operation) Action on: Scan (Search) 4 (IF exchange) 5 (Volume offset) 6 (Display mode) Tap Return to previous operation. When reviewing locations: Enter Scan mode. NA NA NA FUNCTION + Tap NA NA NA Cycle through the available displays. Key Name (2nd operation) Action on: Lockout 7 (Attenuation) 8 (Reverse freq.) 9 (Modulation) Tap Temporarily lockout the current Location Alert. When reviewing locations: Toggle the Lockout status of the current location. NA NA NA Double Tap Permanently lockout the current Location Alert. NA NA NA file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (4 of 5)4/7/2009 10:09:06 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.htmlPress & hold When reviewing locations: Unlock all locations of the current type (POI, Dangerous Road or Crossing). NA NA NA FUNCTION + Press & hold When reviewing locations: Unlock all locations regardless of type. NA NA NA Key Name (2nd operation) Action on: Backlight (Power, Lock) No (Decimal, Priority) 0 (Weather) Yes (Enter, GPS) Tap Turn on the LCD backlight. During a system message: Cancel the message and exit that screen. When reviewing locations: Close the location review list. NA Open the location review location list. When reviewing locations: Edit the selected location. Press & hold Turn the scanner on or off. NA NA NA FUNCTION + Tap Lock or unlock the keypad. NA NA NA FUNCTION + Press & hold NA NA NA When reviewing locations: Replace the select location's coordinates with the coordinates of your current position. This page applies to the following scanner(s): BCD396XT BC346XT Users Guide file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (5 of 5)4/7/2009 10:09:06 AM

Navigation menu