Ubiquiti UAPACIWP UniFi AC In-Wall Pro Wi-Fi Access Point User Manual

Ubiquiti Networks, Inc. UniFi AC In-Wall Pro Wi-Fi Access Point Users Manual

UserManual.wiki >

UAPACIWP User Manual

Users Manual

In-Wall 802.11ac Pro Wi-Fi Access PointModel: UAP-AC-IW-PRO

IntroductionThank you for purchasing the Ubiquiti Networks® UniFi®AC In‑Wall Pro Wi‑Fi Access Point. This Quick Start Guide is designed to guide you through installation and also includes warrantyterms.IMPORTANT: UniFi Controller v5.4 is recommended for managing the UAP‑AC‑IW‑PRO and is available for download at: www.ubnt.com/download/unifiPackage ContentsCover Plate UAP‑AC‑IW‑PRO Back Plate Wall‑Mount Screws (Qty. 4)In-Wall 802.11ac Pro Wi-Fi Access PointModel: UAP-AC-IW-PROTorx Screws (Qty. 2)Phillips Screws (Qty. 2)Torx Security ScrewPhillips Security ScrewQuick Start GuideInstallation Requirements• Pre-installed electrical wall box• Category 5 (or above) UTP cabling approved for indoor use• Phillips and flathead screwdrivers• T10 Security Torx bit (for Security Torx Screw option)• UniFi Switch with PoEIMPORTANT: The UAP‑AC‑IW‑PRO requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.TERMS OF USE: It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements.

System Requirements• Linux, MacOSX, or Microsoft Windows 7/8/10• Java Runtime Environment 1.6 (1.8 or newer recommended)• Web Browser: Google Chrome (Other browsers may have limited functionality.)• UniFi Controller software v5.4 or newer (available at: www.ubnt.com/download/unifi)Network Topology Requirements• A DHCP‑enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment)• A UniFi Cloud Key or management station running the UniFi Controller v5.4 (or newer) software, located either on‑site and connected to the same Layer 2 network, or off‑site in the cloud or NOCUAP-AC-IW-PROUS-48-500WUSG-PRO-4(DHCP Server)InternetUAP-AC-PROUAP-AC-M-PROUAP-AC-HDLANWANUniFi Cloud Key(UniFi Controller)Remote Access toUniFi ControllerSample Network DiagramAll UniFi devices support off‑site management controllers. For setup details, see the User Guide on the website: www.ubnt.com/download/unifi/

Hardware OverviewBack PanelPoE In + DataPoE In + Data 10/100/1000 Ethernet port supports data and 802.3at PoE+ input. The UAP‑AC‑IW‑PRO itself requires 10W.802.3at PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server.

Bottom PanelDataResetPoE Out + Data Security ScrewPoE Out + Data 10/100/1000 Ethernet port supports data and PoE passthrough (requires 802.3at PoE+ input). The maximum PoE passthrough output is 12W.Note: To power and connect an 802.3af device to the LAN, you must use 802.3at PoE+ input.Security Screw (Optional) The Security Screw secures the Cover Plate after installation. You have the option to use the included Torx (shown) or Phillips Security Screw.Data 10/100/1000 Ethernet port supports data only. Used to connect a client device to the LAN.Reset The Reset button serves two functions for the UAP‑AC‑IW‑PRO:• Restart Press and release the Reset button quickly.• Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

LEDLEDColor State StatusWhiteFlashing Initializing.Steady Factory defaults, waiting for integration.White/BlueAlternating Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.BlueSteady Successfully integrated into a network and working properly.Flashing This is used to locate a device. When you click Locate in the UniFi Controller software, the LED will flash blue. The software will also display the location of the AP on themap.*640-00306-02*640-00306-02

Security TabIn addition to the optional Security Screw, the Security Tab helps to secure the Cover Plate after installation. If you need to remove it, use a flathead screwdriver to depress the Security Tab while detaching the Cover Plate:Security Tab

Back PlateThe Back Plate offers a variety of mounting holes for use with different wall boxes. Here are a few examples with the appropriate mounting holes outlined in blue:USA or ChinaEurope

Hardware InstallationAn electrical wall box should be pre‑installed with an Ethernet cable running from the box to a UniFi Switch with PoE.1. Detach the UAP‑AC‑IW‑PRO from the Back Plate.2. Pull the Ethernet cable through the Back Plate, and attach the Back Plate to the wall box using the Wall‑MountScrews.Note: Do not over‑tighten the screws.

3. Connect the Ethernet cable in the wall box to the port labeled PoE IN + DATA.4. Attach the UAP‑AC‑IW‑PRO to the Back Plate using the two Torx or Phillips Screws.

5. Attach the Cover Plate to the bottom of the UAP-AC-IW-PRO. Then press the Cover Plate into position until the Security and mounting tabs snap into place.6. Optional: Secure the Cover Plate to the UAP-AC-IW-PRO using the included Torx or Phillips Security Screw.

Software InstallationDownload and install the latest version of the UniFi Controller software. Launch it and follow the on‑screen instructions. The software and step‑by‑step instructions in the User Guide are available at: www.ubnt.com/download/unifiAfter you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the Admin Name and Password that you created and click Log In. You can manage your wireless network and view network statistics using the UniFi Controller management interface. For information on configuring and using the UniFi Controller software, refer to the User Guide.Mobile App InstallationUbiquiti Networks also offers the UniFi mobile app, which is available from the App Store (iOS) or Google Play™ Store (Android). You can use it to provision a UniFi AP for basic functionality without configuring a UniFi Controller. It also allows seamless provisioning of APs for remote controllers (controllers not on the same Layer 2 network) and easy access to local controllers and those monitored on unifi.ubnt.com

SpecificationsUAP‑AC‑IW‑PRODimensions 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")Weight 210 g (7.41 oz)Networking Interface (3) 10/100/1000 Ethernet PortsButton(s) ResetPower Method 802.3at PoE+ SupportedPower Supply UniFi Switch (PoE)Power Save SupportedPoE Out 48V Passthrough (Pins 1, 2+; 3, 6‑)Max. Power Consumptionwith PoE Passthrough10W22W*Max. TX Power2.4 GHz5 GHz22 dBm22 dBmMIMO2.4 GHz5 GHz3 x 33 x 3Max. Data Speed2.4 GHz5 GHz450 Mbps1300 MbpsMax. Range 100 m (328')Antennas (3) Dual‑Band Antenna, Single‑PolarityAntenna Gain2.4 GHz5 GHz5 dBi6.5 dBiWi‑Fi Standards 802.11 a/b/g/n/acWireless Security WEP, WPA‑PSK, WPA‑Enterprise (WPA/WPA2, TKIP/AES)Mounting 1‑Gang Electrical Wall Box (Not Included)Operating Temperature ‑10 to 50° C (14 to 122° F)Operating Humidity 5 to 95% NoncondensingCertications CE, FCC, IC* Requires 802.3at PoE+ switch.

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that theproduct(s) furnished hereunder (the “Product(s)”) shall be free from defectsin material and workmanship for a period of one (1) year from the dateof shipment by UBIQUITI NETWORKS under normal use and operation.UBIQUITI NETWORKS’ sole and exclusive obligation and liability underthe foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,to repair or replace any Product that fails to conform to the abovewarranty during the above warranty period. The expense of removal andreinstallation of any Product is not included in this warranty. The warrantyperiod of any repaired or replaced Product shall not extend beyond itsoriginal term.Warranty ConditionsThe above warranty does not apply if the Product:(I) has been modified and/or altered, or an addition made thereto,except by Ubiquiti Networks, or Ubiquiti Networks’ authorizedrepresentatives, or as approved by Ubiquiti Networks in writing;(II) has been painted, rebranded or physically modified in any way;(III) has been damaged due to errors or defects in cabling;(IV) has been subjected to misuse, abuse, negligence, abnormal physical,electromagnetic or electrical stress, including lightning strikes, oraccident;(V) has been damaged or impaired as a result of using third partyfirmware;(VI) has no original Ubiquiti MAC label, or is missing any other originalUbiquiti label(s); or(VII) has not been received by Ubiquiti within 30 days of issuance ofthe RMA.In addition, the above warranty shall apply only if: the product has beenproperly installed and used at all times in accordance, and in all materialrespects, with the applicable Product documentation; all Ethernet cablingruns use CAT5 (or above), and for installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.

ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warrantyDisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON‑INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer’s selection of products (including the Products) for buyer’s application and/or failure of products (including the Products) to meet government or regulatory requirements.

Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products.

ComplianceFCCChanges or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions.1. This device may not cause harmful interference, and2. This device must accept any interference received, includinginterference that may cause undesired operation. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and,if not installed and used in accordance with the instruction manual, maycause harmful interference to radio communications. Operations of thisequipment in a residential area is likely to cause harmful interference inwhich case the user will be required to correct the interference at his ownexpense.This radio transmitter FCC ID: SWX‑UAPACIWP has been approved byFCC to operate with the antenna types listed below with the maximumpermissible gain and required antenna impedance for each antenna typeindicated. Antenna types not included in this list, having a gain greaterthan the maximum gain indicated for that type, are strictly prohibited foruse with this device.Antenna Information: Dual‑band antenna with single polarity, 2.4 GHz Gain:5dBi, 5 GHz Gain: 6.5 dBiCountry Code selection feature to be disabled for products marketed tothe US/CANADA

Industry CanadaCAN ICES‑3(A)/NMB‑3(A)This Class A digital apparatus complies with Canadian CAN ICES‑003.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.This device complies with Industry Canada licence‑exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.This radio transmitter (IC: 6545A‑UAPACIWP) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Antenna Information: Dual‑band antenna with single polarity, 2.4 GHz Gain: 5dBi, 5 GHz Gain: 6.5 dBiCAN ICES‑3(A)/NMB‑3(A)Cet appareil numérique de la classe A est conforme à la norme NMB‑003 du Canada.Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est soumis aux deux conditions suivantes:1. Cet appareil ne peut pas provoquer d’interférences et 2. Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.Cet émetteur radio (IC: 6545A‑UAPACIWP) a été approuvée par Industrie Canada pour l’exploitation avec l’antenne types énumérés ci‑dessous avec le gain maximal admissible et requis l’impédance de l’antenne pour chaque type d’antenne indiqué. Types d’antenne non inclus dans cette liste, ayant un gain supérieur au gain maximal indiqué pour ce type, sont strictement interdits pour une utilisation avec cet appareil.Informations d’antenne: Antenne bi‑bande avec polarité unique, Gain 2.4GHz: 5 dBi, Gain 5 GHz: 6.5 dBi

Professional installationProfessional installationinstructionPlease be advised that due to the unique function supplied by this product, thedevice is intended for use with our interactive entertainment software and li-censed third-party only. The product will be distributed through controlled distri-bution channel and installed by trained professional and will not be sold directlyto the general public through retail store.1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.2. Installation locationThe product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal opera tion condition to meet regulatory RF exposure requirement.3. External antennaUse only the antennas which have been approved by Ubiquiti Networks, Inc. The non-approved antenna(s) may produce un wanted spurious or excessive RF transmitting power which may lead to the violation of FCC / IC limit and is prohibited.4. Installation procedurePlease refer to user’s manual for the detail.5. WarningPlease carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty.Instructions d'installation professionnelleVeuillez noter que l'appareil etant dedie a une fonction unique, il doit etre utiliseavec notre logiciel proprietaire de divertissement interactif . Ce produit sera pro-pose par un reseau de distribution controle et installe par des professionels; ilne sera pas propose au grand public par le reseau de la grande distribution.1. Installation1. Installationdivertissement interactif . Ceproduit sera propose par unreseau de distributioncontrole et installe par desprofessionels; il ne sera paspropose au grand public parle reseau de la grande distri-bution.1. InstallationVeuillez noter que l'appareiletant dedie a une fonctionunique, il doit etre utiliseavec notre logicielproprietaire dedivertissement interactif .Ce produit sera proposepar un reseau de distribu-tion controle et installe pardes professionels; il nesera pas propose au grandpublic par le reseau de lagrande distribution.1. InstallationprofessionnelleVeuillez noter que l'appareiletant dedie a une fonctionunique, il doit etre utiliseavec notre logicielproprietaire dedivertissement interactif .Ce produit sera proposepar un reseau de distribu-tion controle et installe pardes professionels; il nesera pas propose au grandpublic par le reseau de lagrande distribution.1. Installation3. External antennaUse only the antennas which have been approvedby Ubiquiti Networks, Inc.The non-approved an-tenna(s) may produce unwanted spurious or ex-cessive RF transmitting power which may lead tothe violation of FCC / IC limit and is prohibited.4. Installation procedurePlease refer to user’s manual for the detail.5. Warning Please carefully select the installation position andmake sure that the final output power does not ex-ceed the limit set force in relevant rules. The viola-tion of the rule could lead to serious federalpenalty.Instructionsd'installationprofessionnelleVeuillez noter que l'appareiletant dedie a une fonctionunique, il doit etre utiliseavec notre logicielproprietaire dedivertissement interactif .Ce produit sera proposepar un reseau de distribu-tion controle et installe pardes professionels; il nesera pas propose au grandpublic par le reseau de lagrande distribution.1. InstallationThis product isdesigned for specificapplication andneeds to be installedby a qualifiedpersonal who hasRF and related ruleknowledge. Thegeneral user shallnot attempt to installor change thesetting.2. Installation locationThe product shall beinstalled at a locationwhere the radiatingantenna can be kept20cm from nearbyperson in normaloperation conditionto meet regulatoryRF exposurerequirement.3. External antennaUse only theantennas whichhave been approvedby UbiquitiNetworks, Inc.Thenon-approvedantenna(s) mayproduce unwantedspurious orexcessive RFtransmitting powerwhich may lead tothe violation of FCC /IC limit and isprohibited.4. Installation procedurePlease refer touser’s manual for thedetail.5. WarningPlease carefullyselect the installationposition and makesure that the finaloutput power doesnot exceed the limitset force in relevantrules. The violationof the rule could leadto serious federalpenalty.Instructionsd'installationprofessionnelleVeuillez noter que l'appareiletant dedie a une fonctionunique, il doit etre utiliseavec notre logicielproprietaire dedivertissement interactif .Ce produit sera proposepar un reseau dedistribution controle etinstalle par desprofessionels; il ne serapas propose au grandpublic par le reseau de lagrande distribution.1. Installation

Ce produit est destine a un usage specifique et doit etreinstalle par un personnel qualifie maitrisant les radiofrequenceset les regles s'y rapportant. L'installation et les reglages nedoivent pas etre modifies par l'utilisateur final.2. Emplacement d'installationEn usage normal, afin de respecter les exigencesreglementaires concernant l'exposition aux radiofrequences, ceproduit doit etre installe de facon a respecter une distance de20 cm entre l'antenne emettrice et les personnes.3. Antenn externe.Utiliser uniiquement les antennes approuvees par le fabricant.L'utilisation d'autres antennes peut conduire a un niveau derayonnement essentiel ou non essentiel depassant les niveauxlimites definis par FCC/IC, ce qui est interdit.4. Procedure d'installationConsulter le manuel d'utilisation.5. AvertissementChoisir avec soin la position d'installation et s'assurer que lapuissance de sortie ne depasse pas les limites en vigueur. Laviolation de cette regle peut conduire a de serieuses penalitesfederales.

RF Exposure WarningThe antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.Les antennes utilisées pour ce transmetteur doivent être installé en considérant une distance de séparation de toute personnes d’au moins 20cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre antenne ou transmetteur.Australia and New ZealandWarning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.CE MarkingCE marking on this product represents the product is in compliance with all directives that are applicable to it.Alert Sign (!) Follows CE MarkingAlert sign must be indicated if a restriction on use applied to the product and it must follow the CE marking.

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.DeutschDie Europäische Richtlinie 2012/19/EU verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben.

EspañolLa Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.FrançaisLa directive européenne 2012/19/UE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en bonne et due forme ont pour but de lutter contre l’impact néfaste potentiel de ce type de produits sur l’environnement et la santé publique. Pour plus d’informations sur le mode d’élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit.ItalianoLa direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l’ambiente e per la salute dell’essere umano. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.Dansk [Danish]Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Nederlands [Dutch]Hierbij verklaart UBIQUITI NETWORKS, dat deze UBIQUITI NETWORKS apparaat, in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.EnglishHereby, UBIQUITI NETWORKS, declares that this UBIQUITI NETWORKS device, is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Eesti [Estonian]Käesolevaga UBIQUITI NETWORKS kinnitab, et antud UBIQUITI NETWORKS seade, on vastavus olulistele nõuetele ja teistele asjakohastele sätetele direktiivi 1999/5/EÜ.Suomi [Finnish]Täten UBIQUITI NETWORKS vakuuttaa, että tämä UBIQUITI NETWORKS laite, on yhdenmukainen olennaisten vaatimusten ja muiden sitä koskevien direktiivin 1999/5/EY.Français [French]Par la présente UBIQUITI NETWORKS déclare que l’appareil UBIQUITI NETWORKS, est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.Deutsch [German]Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI NETWORKS Gerät, in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet.Ελληνική [Greek]Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 1995/5/ΕΚ.Magyar [Hungarian]Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI NETWORKS készülék megfelel az alapvető követelményeknek és más vonatkozó 1999/5/EK irányelv rendelkezéseit.Íslenska [Icelandic]Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipun 1999/5/EB.Italiano [Italian]Con la presente, UBIQUITI NETWORKS, dichiara che questo dispositivo UBIQUITI NETWORKS, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti della direttiva 1999/5/CE.

Navigation menu