Ubiquiti NS2 NanoStation2 User Manual NS2datasheet graffle

Ubiquiti Networks, Inc. NanoStation2 NS2datasheet graffle

User Guide

www.ubnt.comNanoStation2User GuideUSER INSTRUCTIONS1. Launch web browser and type 192.168.1.20 to access NanoStation2. Enter "UBNT" for both username and password
www.ubnt.comTECHNICAL SPECIFICATIONSDataRate TX Power Tolerance DataRate Sensitivity Tolerance1Mbps 26 dBm +/-1dB 1Mbps -97 dBm +/-1dB2Mbps 26 dBm +/-1dB 2Mbps -96 dBm +/-1dB5.5Mbps 26 dBm +/-1dB 5.5Mbps -95 dBm +/-1dB11Mbps 26 dBm +/-1dB 11Mbps -92 dBm +/-1dB6Mbps 26 dBm +/-1dB 6Mbps -94 dBm +/-1dB9Mbps 26 dBm +/-1dB 9Mbps -93 dBm +/-1dB12Mbps 26 dBm +/-1dB 12Mbps -91 dBm +/-1dB18Mbps 26 dBm +/-1dB 18Mbps -90 dBm +/-1dB24Mbps 26 dBm +/-1dB 24Mbps -86 dBm +/-1dB36Mbps 24 dBm +/-1dB 36Mbps -83 dBm +/-1dB48Mbps 23 dBm +/-1dB 48Mbps -77 dBm +/-1dB54Mbps 22 dBm +/-1dB 54Mbps -74 dBm +/-1dBShock and VibrationETSI300-019-1.4Power MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Max Power Consumption4 WattsPower SupplyOperating Temperature -20C to +70COperating Humidity5 to 95% Condensing12V, 1A (12 Watts). Supply and injector includedEnclosure CharacteristicsOutdoor UV Stabalized Plastic Mounting KitPole Mounting Kit includedEnclosure Size26.4 cm x 8 cm x 3cmWeight0.4kgAzimuthElevationPHYSICAL / ELECTRICAL / ENVIRONMENTALMulti-Polarized3dB Beamwidth Elevation30 degreesPolarization SelectionSoftware Controlled3dB Beamwidth Azimuth60 degreesPolarizationNetworking Interface2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceGain10dBi (2400-2500MHz)RoHS ComplianceYESREGULATORY / COMPLIANCE INFORMATIONSYSTEM INFORMATIONProcessor SpecsAtheros AR2315 SOC, MIPS 4KC, 180MHzMemory Information16MB SDRAM, 4MB FlashWireless ApprovalsFCC Part 15.247, IC RS210, CERADIO OPERATING FREQUENCY 2412-2462 MHzANTENNAOutdoor (BaseStation Antenna Dependent):Over 15km RANGE PERFORMANCE802.11b802.11g OFDM802.11g OFDMTX SPECIFICATIONSRX SPECIFICATIONS802.11b
www.ubnt.comNOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.!Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.ADDITIONAL INFORMATION AND COMPLIANCEThis is a Point-to-Point CPE Wireless Device.

Navigation menu