Ubiquiti M5 Outdoor M5 User Manual user guide

Ubiquiti Networks, Inc. Outdoor M5 user guide

Contents

Users Manual

M5OEM Users Guide
DataRate Avg. TX Tolerance DataRate Sensitivity Tolerance1-24Mbps 27 dBm +/-2dB 24Mbps -83 dBm +/-2dB36Mbps 25 dBm +/-2dB 36Mbps -80 dBm +/-2dB48Mbps 23 dBm +/-2dB 48Mbps -77 dBm +/-2dB54Mbps 22 dBm +/-2dB 54Mbps -75 dBm +/-2dBMCS0 27 dBm +/-2dB MCS0 -96 dBm +/-2dBMCS1 27 dBm +/-2dB MCS1 -95 dBm +/-2dBMCS2 27 dBm +/-2dB MCS2 -92 dBm +/-2dBMCS3 27 dBm +/-2dB MCS3 -90 dBm +/-2dBMCS4 26 dBm +/-2dB MCS4 -86 dBm +/-2dBMCS5 24 dBm +/-2dB MCS5 -83 dBm +/-2dBMCS6 22 dBm +/-2dB MCS6 -77 dBm +/-2dBMCS7 21 dBm +/-2dB MCS7 -74 dBm +/-2dBMCS8 27 dBm +/-2dB MCS8 -95 dBm +/-2dBMCS9 27 dBm +/-2dB MCS9 -93 dBm +/-2dBMCS10 27 dBm +/-2dB MCS10 -90 dBm +/-2dBMCS11 27 dBm +/-2dB MCS11 -87 dBm +/-2dBMCS12 26 dBm +/-2dB MCS12 -84 dBm +/-2dBMCS13 24 dBm +/-2dB MCS13 -79 dBm +/-2dBMCS14 22 dBm +/-2dB MCS14 -78 dBm +/-2dBMCS15 21 dBm +/-2dB MCS15 -75 dBm +/-2dBOperating Temperature -30C to 75CYESNetworking Interface1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceSYSTEM INFORMATIONProcessor SpecsAtheros MIPS 24KC, 400MHzMemory Information64MB SDRAM, 8MB FlashREGULATORY / COMPLIANCE INFORMATIONWireless ApprovalsFCC Part 15.247, IC RS210, CERoHS Compliance OPERATING FREQUENCY 5745MHz-5825MHz 5GHz TX POWER SPECIFICATIONS5GHz RX SPECIFICATIONS 11a 11a5GHz 11n 5GHz 11n Enclosure CharacteristicsOutdoor UV Stabalized PlasticMounting KitPole Mounting Kit includedPHYSICAL / ELECTRICAL / ENVIRONMENTALEnclosure Size16cm length x 8cm width x 3cm heightWeight0.5 kgOperating Humidity5 to 95% CondensingShock and VibrationETSI300-019-1.4Max Power Consumption6.5 WattsPower Supply24V, 1A POE Supply IncludedPower MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)TECH SPECS
COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ! The antennas used for this transmitter must be installed to provide a separation distance of at least 252cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. ! INDUSTRY CANADAThis Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du Canada. ! Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. !! To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.! This equipment is required to be professionally installed The device has been designed to operate with the antennas listed below and having a maximum gain of 30dBi. Antennas not included in this list or having a gain greater than 30dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms 2x2 Point-To-Point UseUbiquiti RD-5G-30Ubiquiti RP-5G-24Ubiquiti AMS-5G-201x1 Point-To-Point UseUbiquiti AG-5G-302x2 Point-To-MultiPoitn UseUbiquiti O-5G-7Operation is restricted to Point-To-Point use for antenass other than the Ubiquiti O-5G-7 listed above.

Navigation menu