Ubiquiti B2L 2.4GHz High performance 802.11b/g outdoor point to point radio User Manual b2l guide

Ubiquiti Networks, Inc. 2.4GHz High performance 802.11b/g outdoor point to point radio b2l guide

manual

B2L by Ubiquiti Networks
www.ubnt.comDataRate TX Power Tolerance DataRate Sensitivity Tolerance1Mbps 28 dBm +/-1dB 1Mbps -97 dBm +/-1dB2Mbps 28 dBm +/-1dB 2Mbps -96 dBm +/-1dB5.5Mbps 28 dBm +/-1dB 5.5Mbps -95 dBm +/-1dB11Mbps 28 dBm +/-1dB 11Mbps -92 dBm +/-1dB6Mbps 28 dBm +/-1dB 6Mbps -94 dBm +/-1dB9Mbps 28 dBm +/-1dB 9Mbps -93 dBm +/-1dB12Mbps 28 dBm +/-1dB 12Mbps -91 dBm +/-1dB18Mbps 28 dBm +/-1dB 18Mbps -90 dBm +/-1dB24Mbps 28 dBm +/-1dB 24Mbps -86 dBm +/-1dB36Mbps 24 dBm +/-1dB 36Mbps -83 dBm +/-1dB48Mbps 23 dBm +/-1dB 48Mbps -77 dBm +/-1dB54Mbps 22 dBm +/-1dB 54Mbps -74 dBm +/-1dBSOFTWAREvisit www.ubnt.com/airos Shock and VibrationETSI300-019-1.4Power MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Max Power Consumption4 WattsPower SupplyOperating Temperature -20C to +70COperating Humidity5 to 95% Condensing12V, 1A (12 Watts). Supply and injector includedEnclosure CharacteristicsOutdoor UV Stabalized Plastic Mounting KitPole Mounting Kit includedEnclosure Size12 in. length x 4 in. height x 1in. WidthWeight0.9kgPHYSICAL / ELECTRICAL / ENVIRONMENTALNetworking Interface2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceRoHS ComplianceYESREGULATORY / COMPLIANCE INFORMATIONSYSTEM INFORMATIONProcessor SpecsAtheros AR2315 SOC, MIPS 4KC, 180MHzMemory Information16MB SDRAM, 4MB FlashWireless ApprovalsFCC Part 15.247, IC RS210, CERADIO OPERATING FREQUENCY 2412-2462 MHzOutdoor (BaseStation Antenna Dependent):Over 15km RANGE PERFORMANCE802.11b802.11g OFDM802.11g OFDMTX SPECIFICATIONSRX SPECIFICATIONS802.11b
COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ! The antennas used for this transmitter must be installed to provide a separation distance of at least following distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. 36cm distance for the Grid Antenna20cm distance for the Omni Antenna!Highest gains are 24dBi for Grid. Highest gains are 6dBi for OmniINDUSTRY CANADAThis Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du Canada. ! Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. !! To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.! The device has been designed to operate with the antennas listed below and having a maximum gain of 24dBi. Antennas not included in this list or having a gain greater than 24dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohmsThis device must be professionally installed and is designed for for outdoor point-to-point wireless links.

Navigation menu