Toshiba Information Systems CC4-J02 GSM 900/1800/1900/UMTS Mobile phone with Bluetooth User Manual 08

Toshiba Information Systems (UK) Ltd, Mobile Communications Division GSM 900/1800/1900/UMTS Mobile phone with Bluetooth 08

08 user manual

Abridged English ManualFor more information about handset operations and functions, please go to the SoftBank K.K. Website (www.softbank.jp) for the full manual* or dial 157 from a SoftBank handset for Customer Service. * Please note that the full manual may not be available in English at time of purchase. In this case, call Customer Service or check SoftBank Website again at a later date.910T_J.indb 21-1910T_J.indb 21-1 06.7.7 4:50:51 PM06.7.7 4:50:51 PM
21-221Abridged English Manual 7Handset 7AC Charger (TSCS01) 7Stereo Earphone (TSLAF2) 7BluetoothTM Stereo Headset (TSLAF1) 7Battery Pack (TSBAF1) 7USB Cable (TSDAC1) 7User Guide 7First Step Guide (Japanese only) 7Utility Software for 910T (CD-ROM)*1*2 73G Guide (Japanese only)What's in the Box7In addition to the above items, optional items such as a In-Car Charger, video output cable, stereo earphone-microphone with audio remote control and cradle are available. For details, contact your nearest SoftBank Shop or SoftBank General Information (page 21-53).7You can use a miniSDTM memory card (hereafter referred to as memory card) with your handset. A memory card is not included.Purchase a memory card to use memory card functions. Your handset supports memory cards with a storage capacity of up to 2 GB (as of XXX, 2006). There is no guarantee that all memory cards will work with your handset.*1 Complimentary sample not available for purchase.*2 Upgrades or updates of included utility software may become available on the SoftBank Website (www.softbank.jp) without prior notifi cation. Please check for the newest versions of utility applications and download as required.910T_21_最終校.indd 21-2910T_21_最終校.indd 21-2 06.7.10 10:10:20 AM06.7.10 10:10:20 AM
21-321Abridged English ManualSymbols Used in This ManualUsing Soft KeysUse Soft Keys to perform operations indicated at the bottom of the main display./+ -ENU7Press K to access Option menu.7Press J to complete operations, etc.Using the Navigation KeyUse the Navigation Key to move the cursor, access functions, display the Main menu, confi rm selected items and perform selected operations.Operation(Notation Used in This Manual)FunctionPress up Selects the Live Monitor/Weather IconIncreases the volumeMoves the cursor upAPress down Accesses the Phone BookDecreases the volumeMoves the cursor downBPress left Accesses Dialled NumbersDecreases the volumeMoves the cursor leftDPress right Accesses Received CallsIncreases the volumeMoves the cursor rightCPress centre@Accesses the Main menuConfi rms the selected item or performs the selected operationActs as the camera shutter-release910T_J.indb 21-3910T_J.indb 21-3 06.7.7 4:50:53 PM06.7.7 4:50:53 PM
21-421Abridged English ManualTOSHIBA CORPORATION IMPORTANT NOTE: PLEASE READ BEFORE USING YOUR HANDSETBY ATTEMPTING TO USE ANY SOFTWARE ON THE SUPPLIED HANDSET THIS CONSTITUTES YOUR ACCEPTANCE OF THESE EULA TERMS. IF YOU REJECT OR DO NOT AGREE WITH ALL THE TERMS OF THIS EULA, PLEASE DO NOT ATTEMPT TO ACCESS OR USE THE SUPPLIED SOFTWARE.End User License Agreement This End User License Agreement ("EULA") is a legal agreement between you (as the user) and TOSHIBA CORPORATION ("Toshiba") with regard to the copyrighted software as installed in a Toshiba 3G handset supplied to you (the "Handset"). Use or disposal of any software installed in the Handset and related documentations (the "Software") will constitute your acceptance of these terms, unless separate terms are provided by the Software supplier on the Handset, in which case certain additional or different terms may apply. If you do not agree with the terms of this EULA, do not use or dispose the Software. 1. License Grant. Toshiba grants to you a personal, non-transferable and non-exclusive right to use the Software as set out in this EULA. Modifying, adapting, translating, renting, copying, making available, transferring or assigning all or part of the Software, or any rights granted hereunder, to any other persons and removing any proprietary notices, labels or marks from the Software is strictly prohibited, except as expressly permitted in this EULA. Furthermore, you hereby agree not to create derivative works based on the Software.2. Copyright. The Software is licensed, not sold. You acknowledge that no title to the intellectual property in the Software is or will be transferred to you. You further acknowledge that title and full ownership rights to the Software will remain the exclusive property of Toshiba, Toshiba's affi liates, and/or their suppliers, and you will not acquire any rights to the Software, except as expressly set out in this EULA. You may keep a back-up copy of the Software only so far as necessary for its lawful use. All copies of the Software must contain the same proprietary notices as contained in or on the Software and are subject to the terms of this EULA. All rights not expressly granted under this EULA are reserved to Toshiba, Toshiba's affi liates and/or their suppliers.3. Reverse Engineering. You agree that you will not attempt, and if you are a business organisation, you will use your best efforts to prevent your employees, servants and contractors from attempting to reverse engineer, decompile, modify, translate or disassemble the Software in whole or in part except to the extent that such actions cannot be excluded by mandatory applicable law and only if those actions are taken in accordance with such applicable law. Any failure to comply with the above or any other terms and conditions contained herein will result in the automatic termination of this license and the reversion of the rights granted hereunder to Toshiba.4. DISCLAIMER OF WARRANTY. The Software is provided "AS IS" without warranty of any kind. TOSHIBA, TOSHIBA'S AFFILIATES, AND THEIR SUPPLIERS DISCLAIM ALL WARRANTIES, CONDITIONS OR OTHER TERMS (WHETHER EXPRESS OR IMPLIED), INCLUDING BUT NOT LIMITED TO WARRANTIES, CONDITIONS AND TERMS OF SATISFACTORY QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD-910T_J.indb 21-4910T_J.indb 21-4 06.7.7 4:50:53 PM06.7.7 4:50:53 PM
21-521Abridged English ManualPARTY RIGHTS; AND THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. YOU ACCEPT THAT SOFTWARE MAY NOT MEET YOUR REQUIREMENTS AND NO WARRANTY CAN BE GIVEN THAT OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.5. LIMITATION OF LIABILITY. TO THE FULLEST EXTENT LEGALLY PERMITTED, IN NO EVENT SHALL TOSHIBA, TOSHIBA'S AFFILIATES OR THEIR SUPPLIERS BE LIABLE TO YOU FOR ANY DAMAGES FOR (A) LOST BUSINESS OR REVENUE, BUSINESS INTERRUPTION, LOSS OF BUSINESS DATA; OR (B) CONSEQUENTIAL, SPECIAL, INCIDENTAL OR INDIRECT DAMAGES OF ANY KIND (WHETHER UNDER CONTRACT, TORT OR OTHERWISE) ARISING OUT OF: (I) THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TOSHIBA, TOSHIBA'S AFFILIATES OR THEIR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR (II) ANY CLAIM BY A THIRD PARTY. SAVE AS SET OUT IN THIS SECTION, TOSHIBA'S ENTIRE LIABILITY UNDER THIS EULA SHALL NOT EXCEED THE PRICE PAID FOR THE SOFTWARE, IF ANY.PLEASE MAKE AND RETAIN A COPY OF ALL DATA YOU HAVE INSERTED INTO YOUR PRODUCT, FOR EXAMPLE NAMES, ADDRESSES, PHONE NUMBERS, PICTURES, RINGTONES ETC, BEFORE SUBMITTING YOUR PRODUCT FOR A WARRANTY SERVICE, AS SUCH DATA MAY BE DELETED OR ERASED AS PART OF THE REPAIR OR SERVICE PROCESS.6. Laws. This EULA will be governed by the laws of Japan. All disputes arising out of this EULA shall be subject to the exclusive jurisdiction of the Tokyo District Court.7. Export Laws. Any use, duplication or disposal of the Software involves products and/or technical data that may be controlled under the export laws of applicable countries or region and may be subject to the approval of the applicable governmental authorities prior to export. Any export, directly or indirectly, in contravention of the export laws of applicable countries or region is prohibited.8. Third Party Benefi ciary. You agree that certain suppliers of the Software to Toshiba have a right as a third party benefi ciary to enforce the terms of this EULA against you as a user.910T_J.indb 21-5910T_J.indb 21-5 06.7.7 4:50:54 PM06.7.7 4:50:54 PM
21-621Abridged English ManualSafety Precautions7 To ensure proper usage, be sure to read the Safety Precautions thoroughly before using your handset. Always keep this manual available for future reference.7 Be sure to follow the safety information contained in the instruction manuals and indicated on the product to prevent injury to the user and other persons, as well as damage to property.7 When a child uses the handset, it is recommended that a parent or guardian reads the instruction manuals thoroughly and provides proper instructions to the child.7 The following describes the meaning of safety symbols and signal words. Be sure to understand their meanings before proceeding to read this manual.Pictograph DescriptionsPictograph Meaning Danger Indicates an imminently hazardous operation that could result in death or serious injury1 of the user. Warning Indicates a potentially hazardous operation that could result in death or serious injury1 of the user. CautionIndicates a potentially hazardous operation that could result in minor or moderate injury2 to the user or damage to property3.1 Serious injury includes loss of sight, wounds, high temperature burns, low temperature burns (burns causing reddish areas, blistering and other damage to the skin as a result of heat exceeding the body temperature contacting your skin for a prolonged time), electric shock, fractures and poisoning requiring hospitalization or long-term medical treatment.2 Injury includes wounds, burns and electric shock not requiring hospitalization or long-term medical treatment.3 Damage to property includes extensive damage to homes and household property, as well as livestock and pets.Symbol DescriptionsSymbol Meaning indicates a prohibited action. The prohibited action is indicated graphically or described in text in or near the symbol. indicates a compulsory action that must be carried out.The compulsory action is indicated graphically or described in text in or near the symbol.910T_J.indb 21-6910T_J.indb 21-6 06.7.7 4:50:54 PM06.7.7 4:50:54 PM
21-721Abridged English ManualLimitation of Liability・ SoftBank and Toshiba accept no liability whatsoever for any damages arising from natural disasters such as earthquakes, lightning, storms and fl oods, as well as fi res through no fault of SoftBank and Toshiba, acts by third parties, other accidents, improper use by the user, whether intentionally or negligently, or use under other abnormal conditions.・ SoftBank and Toshiba accept no liability whatsoever for incidental damages arising out of the use or inability to use the product, including, but not limited to, corruption or loss of data, lost business revenue or suspension of business operations.・ SoftBank and Toshiba accept no liability whatsoever for any damages arising from improper use not conforming to the instructions in the instruction manuals.・ SoftBank and Toshiba accept no liability whatsoever for any damages arising from malfunctions caused by use in combination with connection equipment or software that is not authorized for use by SoftBank and Toshiba.・ Image data recorded with the camera, downloaded data and other data may be corrupted or lost due to malfunction, repair or other improper handling of the product. SoftBank and Toshiba accept no liability whatsoever for the restoration of corrupted or lost data, as well as any damages or lost revenue and profi ts.・ SoftBank and Toshiba accept no liability whatsoever for corruption or loss of stored data resulting from failures or malfunctions of the product, regardless of the cause. Be sure to keep a separate memo of important data to limit damage caused by data corruption or loss to a minimum. DangerDo not disassemble, modify or repair the handset, battery pack, charger, Stereo Earphone or BluetoothTM Stereo HeadsetDoing so may cause overheating, rupturing, fi re, electric shock, injury or malfunction. Modifi cation of the handset is prohibited by Japanese Radio Law. For repair, contact your nearest SoftBank Shop or SoftBank Customer Assistance (page 21-53).Do not dispose of the handset, battery pack, charger, Stereo Earphone or BluetoothTM Stereo Headset in a fi re or expose it to heatIf the handset or battery pack is exposed to water, do not dry it artifi cially in heating equipment (microwave oven, etc.)Doing so may cause overheating, rupturing, fi re or malfunction.Do not charge, use or leave the handset, battery pack, charger, Stereo Earphone or BluetoothTM Stereo Headset in hot places such as near a fi re or heaterDoing so may cause overheating, rupturing, fi re or malfunction.910T_21_最終校.indd 21-7910T_21_最終校.indd 21-7 06.7.10 10:10:59 AM06.7.10 10:10:59 AM
21-821Abridged English ManualDo not expose the handset, charger, battery pack , Stereo Earphone or BluetoothTM Stereo Headset to fl uids such as water, perspiration or seawaterDoing so may cause overheating, rupturing, fi re, electric shock or malfunction. If the handset is dropped accidentally in water or any other fl uid, immediately turn off the handset and contact your nearest SoftBank Shop or SoftBank Customer Assistance (page 21-53).Do not leave the handset, charger, battery pack, Stereo Earphone or BluetoothTM Stereo Headset outdoors, in a bathroom or wherever water or any other fl uid is usedDo not place the handset, charger or battery pack near cups, vases or other containers of fl uidsExposure to water or other fl uids may cause electric shock, overheating, rupturing or fi re.Do not use excessive force when inserting the battery pack into the handset or connecting the handset to the chargerDo not connect any cords with reverse polarityDoing so may cause the battery pack to leak, rupture, overheat or catch fi re, as well as cause electric shock or malfunction.Do not touch the battery pack connectors (metal parts) with any metal objects (necklace, hairpin, etc.)Doing so may cause the battery pack to overheat, rupture or catch fi re, as well as the metal object to overheat.Do not use a battery pack other than one supplied with or designated for the handsetDo not use the battery pack for any other handsetDoing so may cause overheating, rupturing, fi re or malfunction.Do not use a charger other than one supplied with or designated for the handset to charge the battery packDo not use the charger for any other handsetDoing so may cause overheating, rupturing, fi re or malfunction.Do not charge, overheat, disassemble or short the dry battery of BluetoothTM Stereo Headset or put it into a fi re.Doing so may cause ignition, rupturing, malfunction or fi re.If electrolyte fl uid leaking from the dry battery of BluetoothTM Stereo Headset comes into contact with your skin or clothes, wash it immediately with clean water as this may hurt your body. And if it gets into your eyes, do not rub them, and have them immediately treated by an ophthalmologist after washing them with clean water. If the fl uid sticks to the equipment, wipe it out without touching it directly.If the fl uid is left as it is, your skin may get irritated or there may be fear of losing your sight. Danger910T_21_最終校.indd 21-8910T_21_最終校.indd 21-8 06.7.10 10:11:01 AM06.7.10 10:11:01 AM
21-921Abridged English ManualDo not charge the battery pack while it is wet or dampDoing so may cause overheating, rupturing, fi re, electric shock or short circuit. If the battery pack is exposed to fl uids such as water, unplug the rapid charger immediately.Do not use the handset while drivingDo not make or receive a call and do not use other functions (messaging, game, camera, video, music, mobile light, etc.)Doing so may cause a traffi c accident. Use of the handset while driving is prohibited by law. Before using the handset, stop the vehicle in a safe area where parking is permitted.Do not use the handset wherever there is the risk of a fi re or explosion such as in a petrol stationDoing so may ignite the gases and start a fi re or explosion. Turn off the handset and do not charge it wherever gases may be present (petrol station, etc.).Do not swing the handset by its strap, a video output cable, the Stereo Earphone or BluetoothTM Stereo HeadsetDoing so may cause an injury, accident or damage.Turn off the handset while you are near any precision electronic equipmentRadio waves may adversely affect the operation of electronic equipment. Examples of such equipment: medical electronic equipment such as cardiac pacemakers and hearing aids or fi realarms and automatic doors. If you use medical electronic equipment, consult with the equipment manufacturer or distributor about the infl uence of radio waves.Remove the power plug from the outlet if the rapid charger is not to be used for a long period of time or before cleaningFailing to do so may cause an electric shock, fi re or malfunction.Turn off the handset wherever its use is prohibited such as on an aircraftCancel schedule and alarm settings before turning handset power offUse of the handset on an aircraft is prohibited by law.Check your surroundings to confi rm that it is safe to make/receive calls, send/receive messages, take pictures or record videos Failing to do so may cause you to trip over or cause a traffi c accident. Warning910T_21_最終校.indd 21-9910T_21_最終校.indd 21-9 06.7.10 10:11:02 AM06.7.10 10:11:02 AM
21-1021Abridged English ManualDo not use the handset with any power voltage other than the specifi ed voltageDoing so may cause a fi re. The power voltages are 100 to 240 V AC for the rapid charger and 12 or 24 V DC (for a negative ground car only) for a In-Car Charger.Wipe away any dust on the plug of the rapid charger with a dry cloth after removing the plug from the outletDust on the plug or outlet may cause a fi re.Follow the instructions below when installing and wiring in-vehicle devices・Make sure that devices do not interfere with driving and safety equipment such as airbags・Make sure that wires are not caught in seatbelt buckles, doors or other moving partsAny wire caught around a foot, brake pedal, accelerator pedal, etc. may interfere with driving and cause a traffi c accident. If any part of an in-vehicle device drops onto the fl oor, it may startle you into abrupt braking or steering, leading to a traffi c accident.If electrolyte fl uid leaking from the battery pack gets into your eyes, wash your eyes immediately with clean water and have your eyes treated by an ophthalmologistFailing to receive treatment for your eyes may result in eye injury.When thunder is heard outside, stop using the handset immediatelyTurn off the handset and do not touch itFailing to do so may attract lightning and cause electric shock. When thunder is heard, stop using the handset and move to a safe place such as inside a building. If the battery pack fails to charge in the specifi ed time, stop charging immediatelyFailing to do so may cause overheating, rupturing or fi re. Contact your nearest SoftBank Shop or SoftBank Customer Assistance (page 21-53).When inserting the rapid charger plug into an AC household outlet, make sure that a metal strap or any other metal object does not touch the plugFailing to do so may cause electric shock, short circuit or fi re. Warning910T_21_最終校.indd 21-10910T_21_最終校.indd 21-10 06.7.10 10:11:03 AM06.7.10 10:11:03 AM
21-1121Abridged English ManualIf something unusual happens to the handset, battery pack or charger; for example, it emits smoke or an unusual odour or is damaged, perform the following steps immediately1. If the battery pack is charging, unplug the rapid charger from the AC household outlet or unplug the In-Car Charger from the cigarette lighter socket.2. Make sure that the handset is not hot, then turn it off and remove the battery pack.Failing to do so and continuing use (charging) may cause the battery pack to overheat, rupture or catch fi re or the handset to overheat. If something unusual happens, contact your nearest SoftBank Shop or SoftBank Customer Assistance (page 21-53).Do not drop the handset or battery pack or subject it to excessive shockDoing so may cause overheating, rupturing, fi re or malfunction.Do not sit down with the handset in your trousers pocketExcess weight may damage the display, battery pack or other parts resulting in overheating, fi re or injury.If the handset is used near an implanted cardiac pacemaker, defi brillator or other electronic medical equipment, radio waves may interfere with such a device or equipment Observe the following guidelines1. If you have an implanted cardiac pacemaker or defi brillator, carry and use the handset at a distance of at least 22 centimetres away from the implanted device.2. Turn off the handset in crowded places such as packed trains because a person with an implanted cardiac pacemaker or defi brillator may be nearby. Radio waves can interfere with the operation of a cardiac pacemaker or other medical device.3. Follow the precautions below in medical institutions.・Do not bring the handset into an operating room, intensive care unit or coronary care unit.・Turn off the handset in a hospital ward.・Turn off the handset in a lobby or other location close to medical equipment.・Observe the instructions of individual medical institutions and do not use the handset in or bring it into prohibited areas.・Turn off the handset after cancelling any settings such as schedule and alarm settings that turn on the handset automatically. Warning910T_21_最終校.indd 21-11910T_21_最終校.indd 21-11 06.7.10 10:11:04 AM06.7.10 10:11:04 AM
21-1221Abridged English Manual4. When using electronic medical devices other than an implanted cardiac pacemaker or defi brillator outside of medical institutions (such as at home), consult with the individual medical device manufacturer about the possible infl uence of radio waves.The above information conforms to "The Guidelines on Use of Mobile Phones and Other Devices to Prevent Electromagnetic Wave Interference with Electronic Medical Equipment" (Electromagnetic Compatibility Conference Japan, April 1997), as well as refers to "The Investigative Research Report on the Infl uence of Electromagnetic Waves on Medical Equipment" (Association of Radio Industries and Businesses, March 2001).Do not use the rapid charger with any power supply other than a 100 to 240 V AC household power supply Doing so may result in a fi re, as well as cause the charger to overheat, catch fi re or malfunction. Do not insert the dry battery of BluetoothTM Stereo Headset with wrong polarity [(+) & (-)].Doing so may cause the malfunction of the equipment as well as cause the dry battery to leak. Do not use the dry battery of BluetoothTM Stereo Headset after the “Recommended Use-by Date” displayed on the battery expired, or do not leave the used-up dry battery as being inserted.Doing so may cause the malfunction of the equipment as well as cause the dry battery to leak.Keep the dry battery of BluetoothTM Stereo Headset out of the reach of small children.If it is mistakenly swallowed, consult a doctor as soon as possible because this may cause suffocation or injury to stomach etc. Warning910T_21_最終校.indd 21-12910T_21_最終校.indd 21-12 06.7.7 9:48:35 PM06.7.7 9:48:35 PM
21-1321Abridged English ManualDo not use or leave the handset or battery pack in places where it will be exposed to direct sunlight or in hot places such as inside a car in the sunDoing so may cause overheating, fi re or malfunction.Keep the handset, battery pack and charger away from infants and small childrenFailing to do so may result in the battery pack or memory card being accidentally swallowed or cause an injury.Make sure that the charger terminals (metal parts) do not come into contact with wires or other metal objectsFailing to do so may cause overheating or burns.Do not pull the cord when unplugging the rapid charger or In-Car Charger from an AC household outlet or socketDamage to the cord may cause electric shock, overheating or fi re.Hold the plug when unplugging the rapid charger or In-Car Charger.Do not pull, bend with excessive force or twist the cords of the rapid charger and In-Car ChargerDo not damage or modify themDo not place objects on themDo not apply heat and keep them away from heatersDamage to a cord may cause electric shock, overheating or fi re.Do not plug or unplug the rapid charger with wet handsDoing so may cause electric shock or malfunction.Keep magnetic cards away from the handset and make sure that a magnetic card is not trapped when closing the handsetFailing to do so may cause the magnetic data on a cash card, credit card, telephone card or fl oppy disk to be lost.Do not use the handset in a vehicle if it affects in-vehicle electronic devicesUse of the handset in some types of vehicles may, in some rare cases, affect in-vehicle electronic devices and interfere with safe driving. Caution910T_J.indb 21-13910T_J.indb 21-13 06.7.7 4:51:02 PM06.7.7 4:51:02 PM
21-1421Abridged English ManualDo not place the handset on an unstable or unlevel surfaceDoing so may result in the handset falling and causing injury or malfunction. Be particularly careful when vibration is set.Do not dispose of the used battery pack with ordinary garbageInsulate the connectors with tape and then dispose of the used battery pack separately from ordinary garbage or take it to your nearest SoftBank Shop. Be sure to observe local regulations on the separate collection of used batteries, wherever applicable.Do not touch the handset with sweaty hands or place it into a pocket of sweaty clothesSweat and humidity may erode the internal components of the handset and cause overheating or malfunction.Do not use the In-Car Charger when the car engine is not runningDoing so may result in a fl at battery.If the fuse for the In-Car Charger blows, replace it with a designated fuseReplacing the fuse with other than a designated fuse may cause overheating and fi re.For details on replacing the fuse, refer to the instruction manual of the In-Car Charger.If fl uid leaking from the battery pack comes into contact with skin or clothing, wash it away immediately with clean waterFailing to do so may cause skin irritation.Do not use any other dry batteries than the AAA battery for BluetoothTM Stereo Headset.Doing so may cause the malfunction of the equipment as well as cause the dry battery to leak. Caution910T_21_最終校.indd 21-14910T_21_最終校.indd 21-14 06.7.7 9:48:50 PM06.7.7 9:48:50 PM
21-1521Abridged English ManualIf your skin becomes irritated, immediately stop using the handset and consult with a dermatologistThe following materials and surface treatments have been used for the handset. Some of these materials may cause itching, irritation, eczema, etc. in some rare cases depending on the individual's constitution and physical condition.Part Material (Surface Treatment)Outer housing (keypad), keys, mobile light panel (pellucid area) PC resin (UV cured acrylic coating)Outer housing (main display side) Magnesium alloy (Acrylic baking coating)Outer housing (external display panel, hinge cover, battery compartment), screw cover (receiver, lower side of main display), earphone microphone jack cap (fl ank-battery side), memory card slot cap (fl ank-battery side)PPE resin (UV cured acrylic coating)Earphone microphone jack cap (flank-key side), memory card slot cap (fl ank-key side)PC resinOuter housing (infrared port), mobile light panel (colored part)PC/ABS resin (UV cured acrylic coating)Main display panel, main camera panel, external camera panelAcrylic resin (UV cured acrylic ink processing) CautionPart Material (Surface Treatment)External display panel Tempered glass (polyester fi lm)Clearance keeper Urethane acrylate resinIllumination (luminescence part), charging lamp (luminescence part) PC resinIllumination (cushion part), charging lamp (cushion part), opening/closing stopper, earphone microphone jack cap (drawing part), memory card slot cap (drawing part)Polyester elastomer resinCable connector cap Polyester elastomer resin (urethane coating)Charging terminal Stainless sheet copper (gold plating, nickel undercoat)Infrared port Acrylic resinScrews Steel (nickel coating, copper undercoat)Hinge clearance keeper (hinge case side) Polyurethane resinSpeaker hole mesh Stainless sheet copperClose-up switch PC resin 910T_J.indb 21-15910T_J.indb 21-15 06.7.7 4:51:04 PM06.7.7 4:51:04 PM
21-1621Abridged English ManualBefore using the handset, make sure that no metal objects (such as pins) are stuck to the earpieceFailing to do so may result in a metal object causing an ear injury, etc.If you have a weak heart, be careful with the call vibration and ringtone volume settingsFailing to do so may startle you and may be harmful to your heart.Be careful not to trap your fi ngers or objects when closing the handset and not to trap your fi ngers in the hinge when opening the handsetFailing to do so may cause injury or damage to the LCD display.Do not use the mobile light and fl ashlight for purposes other than taking pictures, recording videos or lightingDoing so may dazzle the eyes and cause impaired vision or other injury.Make sure things like paper, cloth and bedding are not placed on the handset during charging using a USB connection, AC adapter, etc. Failing to do so may cause overheating, fi re, burns or malfunction. Do not turn the volume up too high while using the Stereo Earphone or BluetoothTM Stereo HeadsetDo not use Stereo Earphone or BluetoothTM Stereo Headset continuously for long periods of timeExposure to high sound levels may impair hearing and prolonged use may cause hearing defect regardless of the volume level. Sound leakage may annoy other people and surrounding sounds may not be heard clearly resulting in an accident.Do not insert objects other than the memory card into the memory card slotDoing so may cause overheating, electric shock or malfunction.Cover the slot with the cap at times other than when you are inserting or removing the memory card.Keep your face away from the memory card slot when inserting or removing the memory cardKeep the memory card out of the reach of small childrenIf the memory card is let go of suddenly, it may fl y out and hit your face resulting in injury. Caution910T_21_最終校.indd 21-16910T_21_最終校.indd 21-16 06.7.10 10:11:39 AM06.7.10 10:11:39 AM
21-1721Abridged English ManualDo not subject the memory card to vibration or shock or remove it from the slot or turn off the handset while data is being written to or read from the memory cardDoing so may cause data loss or malfunction.Use only the memory card supported by the handsetFailing to do so may cause data loss or malfunction.The handset supports memory cards with a storage capacity of up to 2 GB (as of XXX, 2006).Do not let children use cables such as a video output cable, the Stereo Earphone or BluetoothTM Stereo Headset unsupervised and keep cables out of infant's reachAn injury may be caused if, for instance, the cable is wrapped around a neck. Do not point the infrared beam at anyone’s eye during infrared communicationDoing so may cause eye damage.Do not use the mobile light close to eyesDoing so may cause eye damage. Be especially careful not to take pictures or record videos with the mobile light too close to the eyes of infants.Do not use excessive force when inserting or removing the USIM cardDoing so may cause a malfunction. Be careful not to injure a hand or fi nger when removing the card.Use only a USIM card designated for the handsetFailing to do so may cause data loss or malfunction. Do not remove the polyester fi lm from the external displayUsing the handset without the polyester fi lm to protect against shattering of the reinforced glass may result in an injury if the external display is damaged. Caution910T_21_最終校.indd 21-17910T_21_最終校.indd 21-17 06.7.10 10:11:41 AM06.7.10 10:11:41 AM
21-1821Abridged English ManualGeneral NotesUsing Your Handset7 The handset employs radio waves. Signals may be disrupted even within service areas if you are indoors, underground, inside a tunnel or inside a vehicle. If you move to a location with poor signal reception, a call may be suddenly cut off.7 When using the handset in public places, take care not to annoy other people around you. Use of the handset is prohibited in some public places such as in theatres or on buses and trains.7 The handset is a radio transceiver under Japanese Radio Law. You may be requested to submit the handset for inspection based on this law.7 Use of the handset near a landline phone, TV or radio may affect the image and sound quality of the equipment.7 The handset employs a digital system to maintain a high level of communication quality even at very low signal levels. However, calls may be suddenly cut off when the signal strength becomes too weak.7 The digital system provides a high level of privacy protection. However, the possibility of someone eavesdropping on your conversation cannot be ruled out as long as radio waves are used.7 Data stored on the handset may be corrupted or lost on the following occasions. ・The handset is used improperly. ・The handset is exposed to static electricity or electric noise. ・The handset is turned off during operation. ・The battery pack is completely discharged. ・The handset malfunctions or is sent for repairs. SoftBank and Toshiba accept no liability whatsoever for the corruption or loss of stored data. Be sure to keep a separate memo of important data to limit damage caused by data corruption or loss to a minimum.7 Be sure to charge the battery pack before using the handset for the fi rst time or if the handset has not been used for a long time. When the battery pack is stored for a long time, it discharges over time even if it is not used.7 Before using a memory card, read the instruction manual of the memory card thoroughly to ensure safe and proper operation.7 When the handset is used for extended periods of time, especially in high temperature conditions, the handset surface could become hot. Please use caution when touching the handset under such conditions.7 When certain items are taken out of the country, documentation may be required to certify that the export of the items is not controlled, prohibited, or restricted by the Export Trade Control Order and Foreign Exchange Order. Basically, no such documentation is required if you take the handset out of the country and bring it back for the purpose of personal use when going on vacations or short business trips. In some cases, however, an export permit may be required if the handset is to be used by or transferred to anyone else. Furthermore, a US government export permit may be required when taking the handset to countries for which the US government has imposed export restrictions (Cuba, Libya, North Korea, Iran, Sudan, Syria). For details on export laws, regulations and procedures, refer to the Web page of the Security Export Control Policy Division of the Ministry of Economy, Trade and Industry.7 If you have hearing aids, use of the handset may interfere with some operations of the hearing aids. If there is any interference, consult with the manufacturer or distributor of the hearing aids.910T_J.indb 21-18910T_J.indb 21-18 06.7.7 4:51:07 PM06.7.7 4:51:07 PM
21-1921Abridged English ManualInside Vehicles7 Do not use the handset while driving. Use of the handset while driving is prohibited by law.7 Before using the handset, stop the vehicle in a safe area where parking or stopping is permitted.Aboard Aircraft7 Do not use the handset on an aircraft. Turn off the handset after cancelling any settings such as schedule and alarm settings that turn on the handset automatically. Do not turn the handset back on while you are on the aircraft. Use of the handset on an aircraft is prohibited by law.Electromagnetic Waves7 For body worn operation, this phone has been tested and meets RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 15 mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines.Handling Basics7 Do not use the handset in extreme temperatures, direct sunlight and humid or dusty places.7 Do not drop the handset or subject it to excessive shock.7 To clean the handset, wipe it with a dry soft cloth. Do not use alcohol, thinner, benzene or other solvents. Doing so may cause discoloration and remove the printed logo.7 Avoid exposing the handset to rain, snow or high humidity. The handset, battery pack, charger, Stereo Earphone, BluetoothTM Stereo Headset and other optional accessories are not waterproof.7 Do not remove the battery pack while handset power is on to avoid malfunction. 7 If the battery pack has been removed from the handset or the handset has not been charged for a long time, stored data and settings may be lost or altered. SoftBank and Toshiba accept no liability whatsoever for any damage or loss resulting from such negligence.7 The battery pack is a consumable item employing lithium ions. Replace the battery pack with a new one if the operation time becomes extremely short after it is fully charged. Buy a new battery pack designated for the handset.7 When disposing of a used battery pack after battery pack replacement or discontinued use of the handset, insulate the connectors with tape or place the battery pack into a plastic bag and then take it to your nearest SoftBank Shop or battery pack recycling cooperative store. Be sure to observe local regulations on the separate collection of used batteries, wherever applicable.7 Some handset display pixels may be missing or remain lit. This is not a defect or malfunction. If the display is left on for a long period of time, pictures may be permanently burned into it.7 Make sure the Stereo Earphone is securely plugged into the earphone microphone jack. Failing to do so may generate noise on the other party's phone during calls.7 Do not turn the volume up too high while using the Stereo Earphone or BluetoothTM Stereo Headset. Exposure to high sound levels may impair hearing and prolonged use may cause hearing damage regardless of the volume level. Sound leakage may annoy other people and surrounding sounds may not be heard clearly when walking, resulting in an accident.7 When earphone microphone jack and external connector are not in use, make sure to replace the caps. Otherwise dust or water may enter the handset causing handset malfunction.910T_21_最終校.indd 21-19910T_21_最終校.indd 21-19 06.7.10 10:11:57 AM06.7.10 10:11:57 AM
21-2021Abridged English Manual7 Hold the plug and do not pull the cord when unplugging the Stereo Earphone or a video output cable. Pulling the cord may cause damage or malfunction.7 Do not close the handset with the strap, USB cable, Stereo Earphone, BluetoothTM Stereo Headset or a video output cable inside. Doing so may cause malfunction or damage.7 The antenna of the handset is built into the body and does not protrude. Signal sensitivity may be reduced if you touch or cover the portion of the body containing the internal antenna (page 21-27). In particular, do not affi x things like stickers onto this portion of the body.7 The handset's open/close status is detected by a magnetic sensor. Therefore, take care not to place magnetic objects close to the microphone (mouthpiece) to prevent a malfunction.7 When you replace the handset or send it for repair, messages and other data stored in the handset cannot be transferred to another handset.7 Do not drop the USIM card or subject it to excessive shock. Doing so may cause a malfunction.7 Do not bend the USIM card or place a heavy object on it. Doing so may cause a malfunction.7 Do not allow the USIM card to get wet or leave it in places of high humidity. Doing so may cause a malfunction.7 Do not use or leave the USIM card in hot places such as near a fi re or heater. Doing so may cause a malfunction.7 Avoid storing the USIM card in direct sunlight or hot and humid places. Failing to do so may cause a malfunction.7 Keep the USIM card out of infants' reach. Failing to do so may result in the USIM card being accidentally swallowed or cause an injury.7 Before using the USIM card, read the instruction manual of the USIM card thoroughly to ensure safe and proper operation.Mobile Camera7 Be sure to observe proper etiquette when using the camera.7 Do not expose the camera lens to direct sunlight. Concentrated sunlight through the lens may cause the handset to malfunction.7 Be sure to try taking and previewing pictures before using the camera on important occasions like wedding ceremonies.7 Do not commercially use or transfer pictures taken with the camera without the permission of the copyright holder (photographer), except for personal use.7 Do not use the camera in locations where taking photos and recording videos are prohibited.Mobile Light & External Light7 Do not use the mobile light in hot, cold or humid places. Doing so may shorten its life.7 The mobile light and external light have a limited life. Repeated use will decrease the light intensity.910T_21_最終校.indd 21-20910T_21_最終校.indd 21-20 06.7.10 10:11:58 AM06.7.10 10:11:58 AM
21-2121Abridged English ManualCopyrightsCopyrighted materials, such as music, images, computer programs and databases, and their respective holders are protected by copyright laws. Duplication of copyrighted materials is permitted only for individual or home use. Making copies (including data conversion), modifi cations, transfers or network distributions of copies for purposes other than stated above without proper authorization constitutes an infringement of copyrights and moral rights, potentially resulting in claims for reparations or criminal punishment. If you use the handset to make copies, observe the copyright laws. Furthermore, recording materials using the camera is also subject to the same laws.Right of PortraitPortrait right is the right of an individual to refuse to be photographed by others and protects from the unauthorized publication or use of an individual's photograph by others. Right of personality is a portrait right applicable to all citizens and right of publicity is a portrait right (property right) designed to protect celebrities' interests. Be careful when taking pictures with the handset camera. Photographing, publicizing and distributing photographs of citizens and celebrities without permission are illegal.FCC NoticeThe handset may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the handset if such interference cannot be eliminated.Information to UserThis equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient/relocate the receiving aerial.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifi cations not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.910T_J.indb 21-21910T_J.indb 21-21 06.7.7 4:51:09 PM06.7.7 4:51:09 PM
21-2221Abridged English ManualFCC RF Exposure InformationYour handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.The guidelines are based on standards that were developed by independent scientifi c organisations through periodic and thorough evaluation of scientifi c studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless handsets employs a unit of measurement known as the Specifi c Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset when tested for use at the ear is 0.440 W/kg and when worn on the body, as described in this user guide, is 0.713 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the back of the handset kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between the user's body and the back of the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly.The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.The FCC has granted an Equipment Authorisation for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on fi le with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on SP2-CC4-XXX.Additional information on Specifi c Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) website athttp://www.phonefacts.net.European RF Exposure InformationYour mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientifi c organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The guidelines use a unit of measurement known as the Specifi c Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.616 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this user guide**. In this case, the highest tested SAR value is 0.533 W/kg.As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network.The World Health Organization has stated that present scientifi c information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a ‘hands-free’ device to keep the mobile phone away from the head and body. Additional Information can be found on the websites of the World Health Organization (http://www.who.int/emf).* The tests are carried out in accordance with international guidelines for testing.** Please see the <FCC RF Exposure Information> section about body worn operation.910T_21_最終校.indd 21-22910T_21_最終校.indd 21-22 06.7.14 2:28:28 PM06.7.14 2:28:28 PM
21-2321Abridged English ManualFederal Communication Commission StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:・ Reorient or relocate the receiving antenna.・ Increase the separation between the equipment and receiver.・ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.・ Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Any changes or modifi cations not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment.Caution Exposure to radio frequency radiationTo comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.910T_21_最終校.indd 21-23910T_21_最終校.indd 21-23 06.7.7 10:39:17 PM06.7.7 10:39:17 PM
21-2421Abridged English Manual未対応910T_21_最終校.indd 21-24910T_21_最終校.indd 21-24 06.7.7 9:49:23 PM06.7.7 9:49:23 PM
21-2521Abridged English ManualUSIM CardThe USIM card is an IC card that stores customer information such as your phone number. Only insert the USIM card in a USIM card compatible SoftBank handset.7 If the USIM card is not inserted, the handset cannot be used. USIM PINsFor security, the USIM card has two security codes: PIN1 and PIN2. Do not forget these codes and do not reveal them to others.PIN1This is a four to eight digit security code to prevent others from using your handset. The default setting is "9999."PIN2This is the four to eight digit security code required for operations such as resetting Call Time&Cost and setting Fixed Dial #. The default setting is "9999."PIN Lock & PUK CodesPIN lock is set when an incorrect PIN1 or PIN2 is entered three times consecutively. PUK codes are required to cancel PIN1 lock/PIN2 lock. To obtain PUK1/PUK2, contact General Information (page 21-53). If PUK1/PUK2 is incorrectly entered ten consecutive times, USIM card is locked. USIM card lock cannot be canceled. Contact SoftBank General Information (page 21-53).910T_21_最終校.indd 21-25910T_21_最終校.indd 21-25 06.7.10 10:12:18 AM06.7.10 10:12:18 AM
21-2621Abridged English Manual  !TTACHINGTHE(ANDSTRAP6IEWER0OSITIONHandset Parts & Functions910T_21_最終校.indd 21-26910T_21_最終校.indd 21-26 06.7.7 9:49:26 PM06.7.7 9:49:26 PM
21-2721Abridged English Manual1. Earpiece2. Display3. External Light: Flashes for incoming calls, messages, etc.4. Left Soft Key J: Complete operations. Also use this key to access the Messaging menu from standby.5. Navigation Key E: Move cursor up, down, left or right, access functions assigned to the Navigation Key, etc. Centre Key @: Access the Main menu from standby. Use this key to confi rm selected items and perform selected operations.6. Media Player Key H: Start Media Player from standby or make/answer video calls.7. Send Key N: Make and answer calls.8. Cable and Handset Charging Connector: Connect AC Charger and other devices.9. Sub Camera: Used for video call, etc. 10. Charging Indicator: Lights during charging and goes out when charging is complete.11. Right Soft Key K: Access the menu, etc. Also use this key to access Yahoo! Keitai from standby.12. Shortcut Key S: Access the shortcut menu.13. Clear/Memo Key L: Delete characters and return to the previous operation. Also use this key to access Answer Phone from standby.14. End/Power Key O: Power handset on/off, end calls/operations and return to standby.15. Keypad: Enter phone numbers, characters, etc. Press and hold a key (0 to 9) from standby mode to search for Phone Book entries of the column assigned to the key. */ / Key*: Switch between uppercase and lowercase. Also use this key to scroll to the previous page in a screen displaying a list or turn the mobile light on or off during camera use. #/ Key #: Enter symbols, etc. Also use this key to scroll to the next page in a screen displaying a list. To set or cancel Silent, press and hold # from standby.16. Microphone17. External Display: Notifi es of incoming calls, received messages and other information while your handset is closed.18. Mobile Light: Used as a light when taking pictures or recording videos at night time or while indoors.19. Camera/Video Indicator: Flashes when the camera or video is activated.20. Close-up Switch: Switch to macro mode in camera shooting.21. Infrared Port: Used for infrared communication.22. Internal Antenna: The antenna is built into your handset.23. Main Camera: Used for taking pictures and recording videos.24. Side Key R: Activate the camera, etc. This key also acts as the shutter button during camera use. Press and hold R while your handset is closed to set/cancel the Hold setting for the side keys.25. Handstrap Hole26. Memory Card Slot27. Earphone Microphone/AV OUT Jack: Connect the Stereo Earphone or video output cable.28. Stereo Speakers29. Viewer Clear Key X: Use when handset is in Viewer Position (functions as the Clear/Memo Key L in Viewer Position).910T_21_最終校.indd 21-27910T_21_最終校.indd 21-27 06.7.10 10:12:31 AM06.7.10 10:12:31 AM
21-2821Abridged English Manual30. Viewer Soft Key (Left) W: Use when handset is in Viewer Position (functions as the Left Soft Key J in Viewer Position).31. Viewer Navigation Key T/O: Use when handset is in Viewer Position (functions as the Navigation Key E/ Centre Key @ in Viewer Position).32. Viewer Soft Key (Right) Y: Use when handset is in Viewer Position (functions as the Right Soft Key K in Viewer Position).33. Microphone910T_21_最終校.indd 21-28910T_21_最終校.indd 21-28 06.7.7 9:49:28 PM06.7.7 9:49:28 PM
21-2921Abridged English ManualDisplay Indicators１２：３０①②③④⑤⑥⑦⑧⑨⑩ ⑪⑫⑬⑭⑮⑯⑰⑱① Signal Strength    Strong Weak    Moderate Faint Out of Range Offl ine Mode ON② / Voice/Video Call Dial-up Connection Location Position / Quick Positioning Activated/Paused③ Packet Communication Displaying Picture File with Location Information Packet Transmission Ready Packet Network Range④ / 3G/UMTS Network Connection/Roaming / GSM Network Connection/Roaming / GPRS Network Connection/Roaming Service Area of Operator Other than SoftBank⑤ New CAST Reception of Rights Object Indicates the reception of a content key during operation. New MMS/SMS⑥ PC Web Connected New Live Monitor Memory Card Inserted⑦ Web SSL   Indicates a connection to an information page with security protection. / BluetoothTM Connection Established/Connection Standby BluetoothTM Connection Lost Infrared Communication⑧ Software Update External Connection for Data Synchronisation / S! Appli Activated/Paused Music File Playing Music File Playback Paused Video File Playing Streaming910T_21_最終校.indd 21-29910T_21_最終校.indd 21-29 06.7.7 9:49:28 PM06.7.7 9:49:28 PM
21-3021Abridged English Manual⑨ Manner Mode (Silent) Manner Mode (Alarm) / / Original Manner Mode⑩ Battery Level    Suffi ciently Charged Very Low    Low Charge Immediately Charging⑪ Time⑫ Password Lock Active Keypad Lock Active⑬ Alarm Set⑭ ///// Answer Phone On and You Have a Message //// Answer Phone Off and You Have a Message⑮ New Voicemail Message Call Diverting without Ringer Set for Voice Call Call Diverting without Ringer Set for Video Call Call Diverting without Ringer Set for Voice and Video Calls⑯ Information Prompt⑰ Missed Call⑱ Secret Mode OnExternal Display Indicators１２：３０⑪① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩① Signal Strength    Strong Weak    Moderate Faint Out of Range Offl ine Mode ON② Packet Communication Packet Transmission Ready Packet Network Range Location Position / Quick Positioning Activated/Paused③ / 3G/UMTS Network Connection/Roaming / GSM Network Connection/Roaming / GPRS Network Connection/Roaming Service Area of Operator Other than SoftBank④ Reception of Rights Object New MMS/SMS New CAST Alarm Set⑤ New Live Monitor Memory Card Inserted910T_21_最終校.indd 21-30910T_21_最終校.indd 21-30 06.7.7 9:49:32 PM06.7.7 9:49:32 PM
21-3121Abridged English Manual⑥ Web SSL / BluetoothTM Connection Established/Connection Standby BluetoothTM Connection Lost Infrared Communication⑦ Software Update External Connection for Data Synchronisation / S! Appli Activated/Paused Password Lock Active Hold Active Keypad Lock Activated Music Player Cannot be Started⑧ Missed Call Manner Mode (Silent) Manner Mode (Alarm) // Original Manner Mode⑨ New Voicemail Message ///// Answer Phone ON and You Have a Message //// Answer Phone OFF and You Have a Message⑩ Battery Level    Suffi ciently Charged Very Low    Low Charge Immediately Charging⑪ TimeCodesYour security code, centre access code and call barring service code are required for some functions and settings.Security CodeYour security code is "9999" or the four-digit number you selected when you concluded your contract. It is required to use various functions.Centre Access CodeYour centre access code is the four-digit number you wrote on your application form when you concluded your contract. It is required to perform optional service operations from a fi xed-line phone.Call Barring Service CodeYour call barring code is the four-digit number you selected when you concluded your contract. It is required to set call barring.Internet Security CodeIt is required to set Internet security.910T_21_最終校.indd 21-31910T_21_最終校.indd 21-31 06.7.7 9:49:46 PM06.7.7 9:49:46 PM
21-3221Abridged English ManualDisplay PositionsThe following Display positions are available. Most procedures described in this chapter are based on Clamshell Open position.#ONVENIENTFORTAKINGPICTURESOFYOURSELF/PENYOURHANDSETFROMTHECLOSEDSTATE2OTATETHEDISPLAYINTHEDIRECTIONOFTHEARROW #LOSEYOURHANDSET4URNOVERYOURHANDSET6IEWER0OSITIONPAGE#LAMSHELL/PEN3ELFPORTRAIT0OSITION#ONVENIENTFORTAKINGPICTURESANDVIDEOSNote7When rotating the display, hold the section above the display and do not force the display in the wrong direction. Doing so may damage your handset.7Do not carry your handset while it is in viewer position. Doing so may damage the main display.7Do not close your handset while the display is only partially rotated. Doing so may damage the navigation key, etc.910T_21_最終校.indd 21-32910T_21_最終校.indd 21-32 06.7.10 10:12:51 AM06.7.10 10:12:51 AM
21-3321Abridged English ManualUsing Your Handset in Viewer PositionUse W, X, R, O and T to access functions.1. Viewer Clear Key2. Viewer Soft Key (Left)3. Viewer Navigation Key4. Side Key5. Viewer Soft Key (Right)7 The functions assigned to the navigation key are also assigned to the Viewer Navigation Key (page 21-28).Note7 The Viewer Soft Keys and Viewer Navigation Key are available when your handset is in Viewer position. 7 The Viewer Navigation Key is available even while the music player is activated. Charging the Battery Pack!#OUTLET0LUG42APIDCHARGER#HARGINGINDICATOR#HARGINGCONNECTOR2ELEASEBUTTONS#ONNECTOR1 Connect the rapid charger to your handset and then to an AC outletThe inscription on the rapid charger connector should be facing up. Charging indicator lights red and goes out when charging is complete.2 Disconnect the rapid charger from the AC outlet and then from your handsetPress and hold the release buttons on the rapid charger connector to remove it from your handset.Note7 The rapid charger supports a power supply of 100 to 240 V AC.7 To use the rapid charger in another country, purchase an appropriate adapter plug. SoftBank accepts no liability whatsoever for any problem resulting from charging overseas.910T_21_最終校.indd 21-33910T_21_最終校.indd 21-33 06.7.10 10:12:52 AM06.7.10 10:12:52 AM
21-3421Abridged English ManualBasic OperationsTurning Handset Power On1 Press and hold OTurning Handset Power Off1 Press and hold ORetrieving Network InformationBefore using Yahoo! Keitai, retrieve the network connection information. The fi rst time you press @, J or K after purchasing your handset, a prompt appears.1 In standby mode, press @, J or K2 Select YES and press @A network connection is established and the network information is retrieved.Language Setting1 In standby mode, press @The Main menu appears.2 Select 設定 → 一般設定 → Language3 Select language and press @自動選択 : Selects the language set for the language setting in the USIM card automatically.日本語 : Sets the language to Japanese.English : Sets the language to English.Time & Date Setting1 In standby mode, press @2 Select Settings → Phone Settings → Clock → Date&Time3 Enter the year, month, day and time and press @Making a Call1 Enter a phone number and press N2 Press O to end the call910T_21_最終校.indd 21-34910T_21_最終校.indd 21-34 06.7.7 9:49:59 PM06.7.7 9:49:59 PM
21-3521Abridged English ManualRedialing a Phone Number1 In standby mode, press D2 Select a phone number and press N3 Press O to end the callAnswering a Call1 Press N to answer a call2 Press O to end the callPlacing a Call on Hold1 Press O when a call is receivedVoice guidance in Japanese notifi es the caller that you are unable to answer the call at the moment.2 Press N to answer the call3 Press O to end the callRejecting a Call1 Press K (Reject) when a call is receivedViewing Call Log1 In standby mode, press DDialed appears.2 Press DReceived appears.Tip7To display Received, press aC from standby. Press aC once to switch to Dialed.Viewing the Call Time1 In standby mode, press @2 Select Settings → Call Settings → Call Time&Cost3 Select Last Call or All Calls → Time Note7The displayed call time serves as a guide only and may differ from the actual call time.910T_21_最終校.indd 21-35910T_21_最終校.indd 21-35 06.7.7 9:50:00 PM06.7.7 9:50:00 PM
21-3621Abridged English ManualViewing the Call Cost1 In standby mode, press @2 Select Settings → Call Settings → Call Time&Cost3 Select Last Call or All Calls → Cost Note7 The displayed call cost serves as a guide only and may differ from the actual call cost.Viewing Your Phone Number1 In standby mode, press @ then 02 Select My Details and press @Tip7 To view your phone number during a call, press kK (Menu), select My Details and press a@.Setting the NetworkTo use your handset when travelling outside Japan, change the network setting.1 In standby mode, press @2 Select Settings → Call Settings → Call Services → Intl. Calls → Operator → Auto/Manual3 Select Automatic or ManualAutomatic: Selects an available network automatically.Manual: Select a network from the Network list.Setting the System ModeYou can switch the system mode depending on the country or area in which you are located.1 In standby mode, press @2 Select Settings → Call Settings → Call Services → Intl. Calls → SelectNetwork3 Select Automatic, 3G or GSM and press @Automatic: Selects the available system mode automatically.3G: Sets the system mode to UMTS only.GSM: Sets the system mode to GSM only.Setting/Cancelling Manner Mode1 In standby mode, press and hold #910T_21_最終校.indd 21-36910T_21_最終校.indd 21-36 06.7.7 9:50:00 PM06.7.7 9:50:00 PM
21-3721Abridged English ManualAnswer PhoneThis feature can record a caller's message when you are unable to answer a voice call.Setting Answer Phone1 When receiving a call, press and hold LPlaying a Message1 In standby mode, press @2 Select Tools → Answer Phone → Recordings3 Select a message and press @Text EntryYour handset has four text entry modes.Text Entry Modes1 From a text entry window, press H2 Select a text entry mode and press @T9 abc/T9 Abc/T9 ABC: Enter characters in T9 mode.abc/Abc/ABC (Multi Tap mode): Enter alphabets using the keypad.Symbols: Enter symbols and pictographs.Numeric: Enter numbers using the keypad.Tip7In T9 mode:・ Press sS to switch between initial caps, lowercase, numeric and uppercase, input modes.7In T9 mode or Multi Tap mode:・Press and hold sS to switch between T9 mode and Multi Tap mode.・Press /0 to enter a space.・Press and hold a digit key to enter a number.7To enter symbols and pictographs:・Press .# once to access symbol list.・Press ,* once to access pictograph list.7To delete a character, press lL.7 To enter +, press and hold /0 in a number entry mode. 7 To switch to Japanese entry mode, press kK (Menu) from a text entry window and select Customize → Input Method → Standard. To switch back to T9 mode, press kK (Menu) and select Customize → Input Method → T9.Entering Characters in T9 ModeIn T9 mode, press a key once for each letter you want to enter. This feature displays word predictions while you enter characters.Example: Entering "dog"1 Press 3642 Press B to display the next prediction3 Press @ to confirm your selection910T_21_最終校.indd 21-37910T_21_最終校.indd 21-37 06.7.7 9:50:01 PM06.7.7 9:50:01 PM
21-3821Abridged English ManualTip7 To enter a symbol, press ,1 and use aG to select a symbol.Entering Characters in Multi Tap ModeIn Multi Tap mode, each press of a key cycles through the letters and symbols assigned to the key.Example: Entering "dog"1 Press 3 once, 6 three times and 4 onceTip7 To enter a symbol, press ,1 and use aG to select a symbol.Phone BookSave Phone Book entries to your handset, USIM card and memory cards. Save up to 1,000 Phone Book entries to your handset. The maximum number of entries you can save differs depending on the capacity of the USIM card and the memory card.Creating a New Contact1 In standby mode, press @2 Select Phone Book → Add New3 Select an item, enter information and press @4 Press J (OK)Dialling from Phone Book Entries1 In standby mode, press B2 Select an entry and press @3 Select a phone number and press NS! Address BookUse this service to backup your Phone Book to Data Synchronisation Server.Edit entries on your handset or computer and periodically synchronise Phone Book contents to refl ect the changes. Should Phone Book contents be lost or damaged, use S! Address Book to restore contents*.* Some contents cannot be saved to S! Address Book. See the full manual for more details.910T_21_最終校.indd 21-38910T_21_最終校.indd 21-38 06.7.7 9:50:02 PM06.7.7 9:50:02 PM
21-3921Abridged English ManualVideo CallA video call allows two parties with video call compatible handsets to see each other's image during the call.7 Video calling is only available in 3G-network coverage areas (UMTS areas). appears when you are in a 3G-network coverage area.Making a Video Call1 Enter a phone number and press H2 Press O to end the callAnswering a Video Call1 Open the handset2 Press N or H3 Press O to end the callPlacing a Call on Hold1 Press O when a video call is receivedVoice guidance in Japanese notifi es the caller that you are unable to answer the call at the moment.2 Press N to answer the call3 Press O to end the callRejecting a Call1 Press K (Menu) and select Reject Call when a video call is receivedCameraTaking a PictureMobile: Take pictures at QVGA (W240×H320) size or smaller for use as wallpaper, etc.Digital: Take pictures at VGA (W640×H480) size or larger.1 In standby mode, press R2 Frame the subject and press @ or RThe shutter clicks.3 Press @Recording a VideoVideo: Record videos up to 20 minutes long and save them to your handset or a memory card.Video Mail: Record videos for sending as MMS attachments.Short Video: Record videos for sending as MMS attachments to MPEG-4 compatible SoftBank handsets (PDC).1 In standby mode, press and hold R2 Frame the subject and press @ or RThe start sound is heard and recording begins.910T_21_最終校.indd 21-39910T_21_最終校.indd 21-39 06.7.7 9:50:02 PM06.7.7 9:50:02 PM
21-4021Abridged English Manual3 Press @ or RThe end sound is heard and the video is saved automatically to the preset storage place.Tip7In Video mode, press jJ to pause recording and press a@ to resume recording.Media PlayerPlay video/melody fi les, stream fi les and add fi les to Favourites.Playing a Media File1 In standby mode, press @2 Select Media Player → Audio or Videos3 Select a file and press @Creating a PlaylistGroup fi les together in playlists.1 In standby mode, press H and select Playlist2 Press K (Menu) and select New Playlist → Phone Memory/Memory Card3 Enter the name of the playlist and press @4 Select YES → All Music, Artist or Album5 Select a file and press @To add another fi le, repeat Step 4.6 Press J (New)Playing a Playlist1 In standby mode, press H2 Select Playlist 3 Select a playlist and press J (Play)Memory CardSave pictures, videos and other fi les to a memory card.7 If the battery level is low, your handset may not be able to read or write fi les.7 Processing may take a while for some types of fi les.7 Some fi les saved from a PC or other device, may not be displayed/played on your handset.910T_21_最終校.indd 21-40910T_21_最終校.indd 21-40 06.7.7 9:50:03 PM06.7.7 9:50:03 PM
21-4121Abridged English ManualMemory Card Confi gurationFolder Name Description DCIM Stores pictures taken by Digital Camera. PRIVATE− MYFOLDER− Mail The confi guration is identical to each Mail Box on your handset. My ItemsThe folder confi guration (Pictures, Videos, Melody, Music, Templates, Flash®, Books, S! Appli, Gamendeco, Other Files) is identical to that of Data Folder in your handset (see below). Stores Bookmarks backup fi les, too. TS_FolderStores setting data backed up by Relocate function, Gamendeco fi les, and fi les that can be referred to only from the Media Player. Utility− CalendarStores appointment backup fi les. ContactsStores Phone Book backup fi les. MemoStores notepad backup fi les. TasksStores tasks backup fi les.Data FolderSave pictures, videos and various downloaded fi les to Data Folder. 7 Pictures, My Pictographs, Ring Song・Melody, S! Appli, Music, Videos, Books and Templates folders contain a link to a download site in Yahoo! Keitai. Data Folder Confi guration0ICTUREFILES-Y0ICTOGRAPHSFOLDER0ICTURESTAKENWITH$IGITAL3OUNDSUCHASMELODIES3OUNDRECORDEDWITH6OICE2ECORDER$OWNLOADED3!PPLI$OWNLOADEDMUSICFILES#HAKU5TA&ULL6IDEOFILES$OWNLOADEDECOMICSETC-AILTEMPLATES&LASHFILES2INGTONE&LASHFOLDER)CONSIMAGESFORSCREENDECORATION/THERFILES$ATA&OLDER0ICTURES$IGITAL#AMERA2ING3ONG・-ELODY3!PPLI-USIC6IDEOS"OOKS4EMPLATES&LASH'AMENDECO/THER&ILES$ISPLAYSONLYINTHE$ATA&OLDEROFTHEMEMORYCARD910T_21_最終校.indd 21-41910T_21_最終校.indd 21-41 06.7.10 1:29:23 PM06.7.10 1:29:23 PM
21-4221Abridged English ManualFiles Storable in Data FolderFolder File Format (Extension) Pictures*1 JPEG (.JPEG, .JPG, .JPE) GIF (.GIF) PNG (.PNG)*3 My Pictographs GIF (.GIF) GPK (.GPK) Digital Camera*2 JPEG (.JPEG) Ring Song・Melodies*1 AMR (.AMR) SMAF (.MMF) MPEG-4*4 (.3GP, .MP4, .M4A) S! Appli ■ Java (.JAD, .JAR, .RMS) Music*1 MPEG-4 (.3GP*5, .MP4*5, .M4A) Videos*1 MPEG-4*4 (.3GP, .3G2, .MP4) Books*1 CCF (.CCF) Templates ■ HTML mail templates (.HMT) Flash®*1 Ringtone Flash® SWF (.SWF) Chaku-Flash (.SWF) Gamendeco*1■ Files for screen decoration (.TSBI1, .TSBW1, .TSBT1) Other Files*1■ vCard (.VCF)■ vCalendar (.VCS, .ICS) vMessage (.VMG)■ EML (.EML) vBookmark (.VBM, .URL) vNote (.VNT)■ Text (.TXT)■ Other fi les*6 (other extensions)*1: Folders can be created in each folder.*2: Only Data Folder on the memory card can be viewed.*3: Downloaded frames and stamps are saved in PNG (.PNG) format.*4: Some fi les may be unable to be played.*5: Only Chaku-Uta® fi les are saved.*6: The fi les cannot be displayed/played on your handset.Note7 Chaku Uta®, S! Appli, video and other fi les saved to the handset or memory card may become inaccessible after handset repairs, handset upgrades or the USIM card is replaced.・Chaku Uta® is a registered trademark of Sony Music Entertainment Inc.7 You may not be able to open a fi le on a PC, PDA, or other device if: You change the fi le name on your handset or the fi le name includes a " ∼" or " ー."Tip7DCF is an abbreviation for "Design rule for Camera File system," a standard developed by the Japan Electronic Industry Development Association (JEIDA) for the purpose of facilitating the transfer of digital camera images among various devices. 7 Whether a fi le can be sent via infrared communication or BluetoothTM connection or moved to the memory card depends on the forwarding and memory card forwarding permission properties.7 Flash® is an animation technology that combines images and sound.910T_21_最終校.indd 21-42910T_21_最終校.indd 21-42 06.7.7 9:50:07 PM06.7.7 9:50:07 PM
21-4321Abridged English ManualConnectivityUsing InfraredUse the Infrared feature to transfer fi les between your phone and other infrared compatible devices.7 Bring the infrared port of your phone to within 20 cm of the infrared port of the other infrared compatible device and align both ports. Make sure no objects are placed between them.7 Do not move the devices until the fi le transfer is complete.7 Direct sunlight or fl uorescent light may interfere with infrared communication.7 A dirty infrared port may cause an infrared communication failure. If the infrared port is dirty, gently wipe it with a soft cloth while making sure not to scratch the port.Sending Data1 Select a file from a function that supports infrared2 Press K (Menu)3 Select Send or Send vCard and press @4 Select Via Infrared and press @Receiving Data1 In standby mode, receive a connection request from another infrared compatible device.2 Select YES and press @To reject the reception of fi les, select NO.3 Select Phone Memory or Memory Card and press @Using BluetoothTMTransfer Phone Book, picture and other fi les between your handset and another BluetoothTM compatible device. Also use a handsfree compatible device to make a handsfree call.7 Communication tests have not been performed for all BluetoothTM compatible devices. There is no guarantee of connection with all BluetoothTM devices.7 The security function used for wireless communication complies with the standard specifi cations of BluetoothTM. However, take care when using BluetoothTM for data communication because, in some cases, security may be inadequate depending on the operating environment and confi guration.7 SoftBank accepts no liability whatsoever for any data generated or information leaked during BluetoothTM communication.7 The default setting for the BluetoothTM connection standby status is OFF.7 The default setting for Visibility is Show My Phone.910T_21_最終校.indd 21-43910T_21_最終校.indd 21-43 06.7.7 9:50:10 PM06.7.7 9:50:10 PM
21-4421Abridged English ManualSending Data1 Select a file from a function that supports BluetoothTM2 Press K (Menu)3 Select Send or Send vCard and press @4 Select Via Bluetooth and press @5 Select the destination device and press @Receiving Data1 In standby mode, select YES and press @ when a connection is requested by another BluetoothTM compatible device2 Select YES and press @To reject the reception of fi les, select NO.3 Select Phone Memory or Memory Card and press @Using USBUse the USB cable to connect your handset to a PC to transfer Data Folder fi les.7 Install the USB driver and My Mobile software before connecting the USB cable. For details on the installation procedure, refer to the Installation Guide on the supplied Utility Software for 910T (CD-ROM).7 For details on the PC operating environments supported, refer to the Installation Guide on the supplied Utility Software for 910T (CD-ROM).7 For details on connecting the USB cable to a PC, refer to the Installation Guide on the supplied Utility Software for 910T (CD-ROM).Sending/Receiving Data1 Use the USB cable to connect your handset to a PC2 Follow the instructions on the PC910T_21_最終校.indd 21-44910T_21_最終校.indd 21-44 06.7.7 9:50:10 PM06.7.7 9:50:10 PM
21-4521Abridged English ManualOptional ServicesCall DivertUse this service to forward calls to a preset phone number.VoicemailThis service allows a caller to leave a message at the Voicemail Centre when your handset is out of range or a call is in progress. This service is unavailable when Call Divert is set.Call WaitingThis service allows you to place a call on hold to receive another incoming call.Multiparty CallMake or receive a call during a call and talk to multiple parties simultaneously.Call BarringStop all outgoing and incoming calls including international calls.Caller IDThis service allows you to notify the other party of your phone number when you make a call and allows you to confi rm the phone number of a caller.MessagingMMSExchange long text messages with MMS compatible SoftBank handsets and email compatible devices connected to the Internet. Send images, melodies and other fi les as attachments.SMSExchange short text messages with SMS compatible SoftBank handsets.Changing Your Mail AddressYou can change the account name (part before @) of your email address.1 In standby mode, press K2 Select My SoftBank and press @3 Select 各種変更手続き and press @4 Select オリシ゛ナルメール設定・各種メール設定 and press @5 Select English and press @6 Select the centre access code input field and press @7 Enter your centre access code and press @8 Select OK and press @9 Select 1.Messaging settings and press @10 Select 1.Email address and press @910T_21_最終校.indd 21-45910T_21_最終校.indd 21-45 06.7.7 9:50:11 PM06.7.7 9:50:11 PM
21-4621Abridged English Manual11 Select the character input field and press @12 Enter an account name and press @13 Select OK and press @7 If the message The requested E-mail address is already taken. Please choose another address. appears, repeat from Step 11.7 The above procedure may change without prior notice. For further information, contact SoftBank General Information (page 21-53).NoteReceiving MessagesChecking the Contents of a Message1 In standby mode, press J ( )2 Select Message Box and press @3 Select a folder and press @4 Select a message and press @ New message MMS NotificationMMS SMSTip7Press kK (Menu) after Step 3 to perform the following. (Available items will vary depending on the message type.)Menu Item DescriptionView Allows you to use a phone number, email address, URL or fi le in the message.Play Plays the MMS message.3D Displays a message as a 3D picture.Delete Deletes the message.Save Sender Allows you to save the phone number of the sender to the Phone Book.View Files Allows you to play or save a fi le attached to an MMS message.Save Template Allows you to save the message as a template.Text Copy Copies text.Move To Folder Moves the SMS message to your USIM card or handset.To USIMDetails Displays the message properties. 910T_21_最終校.indd 21-46910T_21_最終校.indd 21-46 06.7.10 10:13:26 AM06.7.10 10:13:26 AM
21-4721Abridged English ManualRetrieving MMS MessageWhen an MMS exceeds 285 characters (285 bytes), the initial portion of the message is delivered as a notifi cation. To retrieve the complete message, perform the following steps:1 Open an MMS notificationFor details on displaying messages, see page 21-46.2 Select Retrieve MMS and press @The complete message is downloaded.Tip7To delete the message from the server, press kK (Menu) after Step 1 and select Delete.Replying to a Message1 Open the messageFor details on displaying messages, see page 21-46.2 Press J (Reply)3 Select Blank, With Text or Refer as SMS and press @For details on creating messages, see below.Forwarding a Message1 Open the messageFor details on displaying messages, see page 21-46.2 Press K (Menu)3 Select Divert and press @For details on creating messages, see below.Sending Messages1 In standby mode, press J ( )2 Select Create Msg. and press @3 Select Mail Type → SMS or MMS4 Select Address and press @5 Enter an address and press @Alternatively, you can search for an address from the Phone Book or set a group.6 Select Subject and press @7 Enter the subject and press @8 Select Text and press @9 Enter the body text and press @10 Select Files and press @11 Specify an attachment file and press @12 Press J (Send), select OK and press @910T_21_最終校.indd 21-47910T_21_最終校.indd 21-47 06.7.10 10:13:27 AM06.7.10 10:13:27 AM
21-4821Abridged English ManualMessaging Settings1 In standby mode, press J ( )2 Select Settings and press @3 Select an item and press @You can confi gure the following settings.Mail・Address Connects to the network to change your mail address.Display7Font Size7Scrolling7Show AddressCreating7Simple Input7Category7Signature7Default Type7Notify TypeSending7Confi rmation7Vibration7DeliveryCheck7Expiry Time7Priority7Delivery Time7Reply toReceiving7Retrieve Mode7Auto-extract7Reject Message3D Pict. Setting 7Auto Play7Color SettingS! KeitaiSearching the Mobile InternetSearch for information from the Yahoo! Keitai home page.1 In standby mode, press K2 Select English and press @3 Select an item and press @The information appears.To display more information, repeat Step 3.S! AppliS! Appli are JavaTM compatible applications for use on SoftBank handsets. You can download a variety of applications.910T_21_最終校.indd 21-48910T_21_最終校.indd 21-48 06.7.7 9:50:13 PM06.7.7 9:50:13 PM
21-4921Abridged English ManualStarting the PC Browser1 In standby mode, press @2 Select Yahoo! Keitai →PC Browser3 Select Always Ask or Ask Once Only and press @S! AppliDownloading S! AppliDownload applications from the Web pages of S! Appli providers.Network S! AppliPlay network games online and download information in real time.Standby SettingSet an application to run in standby mode.CommunicationS! TOWNS! TOWN is a virtual space provided by 3D graphics. Enjoy the S! TOWN virtual space e.g. when chatting or shopping.1 In standby mode, press @2 Select Communication →S! TownS! LoopUse S! Loop to keep a diary on the web or exchange information via BBS.1 In standby mode, press @2 Select Communication →S! Loop910T_21_最終校.indd 21-49910T_21_最終校.indd 21-49 06.7.7 9:50:13 PM06.7.7 9:50:13 PM
21-5021Abridged English ManualS! GPS NAVIUse S! GPS NAVI to access navigation functions. Send and receive location information to and from compatible SoftBank mobile phones.NAVIAccess the preset navigation application.Note7 The preinstalled NAVI Application is only in Japanese.Current PositionLocate your current position and send the information by MMS.EntertainmentSubscribe to contents and receive automatic updates. Content updates are received during the night. When updates are received, Information Prompt appears and the following indicators appear: Downloading content New CAST content Download failed7 A monthly subscription fee is required to use this service. No additional fees required for receiving content.7 S! CAST contents available only in Japanese (as of xxxx, 2006).7 S! CAST is only available in Japan.Subscribing/Cancelling Subscription1 In standby mode, press @2 Select Entertainment and press @3 Select CAST and press @4 Select Reg./Cancel →YES and press @Follow the onscreen instructions.Note7Communication fees apply while you are connected to the Web.910T_21_最終校.indd 21-50910T_21_最終校.indd 21-50 06.7.7 9:50:14 PM06.7.7 9:50:14 PM
21-5121Abridged English ManualChecking Content Updates1 In standby mode, press @2 Select Entertainment and press @3 Select CAST and press @4 Select What's new? and press @Indicator Description: Unread ReadChecking Content from Information Prompt1 Information Prompt appears2 Select New CAST Contents and press @Downloading Content ManuallyWhen an update cannot be received because your handset is turned off or the signal is weak, manually download the update. Only updates for that day can be downloaded.1 In standby mode, press @2 Select Entertainment and press @3 Select CAST and press @4 Select Get Latest →YES and press @Requesting Redelivery from Information Prompt 1 Information Prompt appears2 Select CAST Information →YES and press @Checking HistoryPast updates are saved to History.1 In standby mode, press @2 Select Entertainment and press @3 Select CAST and press @Indicator Description: You have unread content You have read all content4 Select History and press @Indicator Description: Unread Read5 Select content and press @Note7Up to seven items are saved to History. The oldest item is deleted automatically.7Up to 3 MB of content including the latest item can be saved. When either the maximum number of content items or the maximum content size is reached, the oldest item is deleted each time there is a new item.910T_21_最終校.indd 21-51910T_21_最終校.indd 21-51 06.7.7 9:50:14 PM06.7.7 9:50:14 PM
21-5221Abridged English ManualMain Specifi cations910TFrequency Range : 3G/UMTS 2100 1920-2170 MHz : GSM 900 880-960 MHz : DCS 1800 1710-1880 MHz : PCS 1900 1850-1990 MHzContinuous Talk Time : Within 3G/UMTS area Approx. XXX min. : Video call Approx. XX min. : Within GSM area Approx. XXX min.Continuous Standby Time : Within 3G/UMTS area Approx. XXX hrs. : Within GSM area Approx. XXX hrs.Charging Time : Approx. XXX min.Dimensions when closed (WxHxD) : Approx. XX× XX× XX mm (excluding the camera)Maximum Output : 3G/UMTS 2100 Class 3 0.25 W : GSM 900 Class 4 2 W : DCS 1800 Class 1 1 W : PCS 1900 Class 1 1 WWeight : Approx. XXX g (when the battery pack is attached)7 The values above were calculated with the battery pack attached.7 The continuous talk time refers to the average length of time a signal can be received normally when the handset is in a stationary state and a new fully charged battery pack is attached.7 The continuous standby time refers to the average length of time a signal can be received normally when the handset is closed, the handset is in a stationary state, a new fully charged battery pack is attached and there are no calls made/received or operations performed. If the handset is in a location outside the service area or where it is diffi cult to receive a signal (in a building, vehicle, bag, etc.), this time may be reduced to half or less. This time may also be affected by other factors such as the operating environment (battery state, temperature, etc.). The value for continuous standby time is when the system mode was set to 3G.7 The operating time of the battery was calculated when a stable signal was received constantly. However, this time may be reduced to half or less if the handset is used in a location where the signal is weak or the handset is left in standby mode when it is outside the service area. Repeated charging and discharging a battery shortens the operating time. If the operating time becomes too short, purchase a new battery pack.7 If the mobile light is used frequently for taking pictures and recording videos or as a fl ashlight, the continuous talk time and continuous standby time become shorter.7 When a S! Appli is activated, the continuous talk time and continuous standby time become signifi cantly shorter.7 If the handset is used with the main display and external display illuminated frequently (for Yahoo! Keitai use, etc.), the continuous talk time and continuous standby time become shorter.7 Note that the LCD display may have defective pixels (dead or stuck pixels).AC ChargerInput Voltage : 100 to 240 V AC : 50/60 HzCharging Temperature Range : 5 to 35°C910T_21_最終校.indd 21-52910T_21_最終校.indd 21-52 06.7.7 9:50:15 PM06.7.7 9:50:15 PM
21-5321Abridged English ManualCustomer ServiceIf you have any questions about a SoftBank handset or service, please call General Information. For service or handset repairs, please call Customer Assistance.SoftBank Customer CentresFrom a SoftBank handset, dial toll free at 157 for General Information or 113 for Customer Assistance.  SoftBank International Call CentreFrom outside Japan, dial+81-3-5351-3491 (Please take care to dial the correct number. International charges will apply to this call.)Call These Numbers Toll Free from Fixed Line PhonesHokkaido, Aomori, Akita, Iwate, Yamagata, Miyagi, Fukushima, Niigata, Tokyo, Kanagawa, Chiba, Saitama, Ibaraki, Tochigi, Gunma, Yamanashi, Nagano, Toyama, Ishikawa, FukuiGeneral Information 0088-240-157Customer Assistance 0088-240-113Aichi, Gifu, Mie, Shizuoka General Information 0088-241-157Customer Assistance 0088-241-113Osaka, Hyogo, Kyoto, Nara, Shiga, Wakayama General Information 0088-242-157Customer Assistance 0088-242-113Hiroshima, Okayama, Yamaguchi, Tottori, Shimane, Tokushima, Kagawa, Ehime, Kochi, Fukuoka, Saga, Nagasaki, Oita, Kumamoto, Miyazaki, Kagoshima, OkinawaGeneral Information 0088-250-157Customer Assistance 0088-250-113910T_21_最終校.indd 21-53910T_21_最終校.indd 21-53 06.7.7 9:50:16 PM06.7.7 9:50:16 PM
21-5421Abridged English Manual910T_21_最終校.indd 21-54910T_21_最終校.indd 21-54 06.7.7 9:50:17 PM06.7.7 9:50:17 PM

Navigation menu